- 05 8月, 2019 2 次提交
-
-
由 Wanpeng Li 提交于
After commit d73eb57b (KVM: Boost vCPUs that are delivering interrupts), a five years old bug is exposed. Running ebizzy benchmark in three 80 vCPUs VMs on one 80 pCPUs Skylake server, a lot of rcu_sched stall warning splatting in the VMs after stress testing: INFO: rcu_sched detected stalls on CPUs/tasks: { 4 41 57 62 77} (detected by 15, t=60004 jiffies, g=899, c=898, q=15073) Call Trace: flush_tlb_mm_range+0x68/0x140 tlb_flush_mmu.part.75+0x37/0xe0 tlb_finish_mmu+0x55/0x60 zap_page_range+0x142/0x190 SyS_madvise+0x3cd/0x9c0 system_call_fastpath+0x1c/0x21 swait_active() sustains to be true before finish_swait() is called in kvm_vcpu_block(), voluntarily preempted vCPUs are taken into account by kvm_vcpu_on_spin() loop greatly increases the probability condition kvm_arch_vcpu_runnable(vcpu) is checked and can be true, when APICv is enabled the yield-candidate vCPU's VMCS RVI field leaks(by vmx_sync_pir_to_irr()) into spinning-on-a-taken-lock vCPU's current VMCS. This patch fixes it by checking conservatively a subset of events. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Marc Zyngier <Marc.Zyngier@arm.com> Cc: stable@vger.kernel.org Fixes: 98f4a146 (KVM: add kvm_arch_vcpu_runnable() test to kvm_vcpu_on_spin() loop) Signed-off-by: NWanpeng Li <wanpengli@tencent.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Wanpeng Li 提交于
kvm_set_pending_timer() will take care to wake up the sleeping vCPU which has pending timer, don't need to check this in apic_timer_expired() again. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: NWanpeng Li <wanpengli@tencent.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 24 7月, 2019 2 次提交
-
-
由 Wanpeng Li 提交于
Commit 11752adb (locking/pvqspinlock: Implement hybrid PV queued/unfair locks) introduces hybrid PV queued/unfair locks - queued mode (no starvation) - unfair mode (good performance on not heavily contended lock) The lock waiter goes into the unfair mode especially in VMs with over-commit vCPUs since increaing over-commitment increase the likehood that the queue head vCPU may have been preempted and not actively spinning. However, reschedule queue head vCPU timely to acquire the lock still can get better performance than just depending on lock stealing in over-subscribe scenario. Testing on 80 HT 2 socket Xeon Skylake server, with 80 vCPUs VM 80GB RAM: ebizzy -M vanilla boosting improved 1VM 23520 25040 6% 2VM 8000 13600 70% 3VM 3100 5400 74% The lock holder vCPU yields to the queue head vCPU when unlock, to boost queue head vCPU which is involuntary preemption or the one which is voluntary halt due to fail to acquire the lock after a short spin in the guest. Cc: Waiman Long <longman@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: NWanpeng Li <wanpengli@tencent.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Christoph Hellwig 提交于
Renaming docs seems to be en vogue at the moment, so fix on of the grossly misnamed directories. We usually never use "virtual" as a shortcut for virtualization in the kernel, but always virt, as seen in the virt/ top-level directory. Fix up the documentation to match that. Fixes: ed16648e ("Move kvm, uml, and lguest subdirectories under a common "virtual" directory, I.E:") Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 22 7月, 2019 5 次提交
-
-
由 Jan Kiszka 提交于
Shall help finding use-after-free bugs earlier. Suggested-by: NLiran Alon <liran.alon@oracle.com> Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Wanpeng Li 提交于
After reverting commit 240c35a3 (kvm: x86: Use task structs fpu field for user), struct kvm_vcpu is 19456 bytes on my server, PAGE_ALLOC_COSTLY_ORDER(3) is the order at which allocations are deemed costly to service. In serveless scenario, one host can service hundreds/thoudands firecracker/kata-container instances, howerver, new instance will fail to launch after memory is too fragmented to allocate kvm_vcpu struct on host, this was observed in some cloud provider product environments. This patch dynamically allocates user_fpu, kvm_vcpu is 15168 bytes now on my Skylake server. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: NWanpeng Li <wanpengli@tencent.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Wanpeng Li 提交于
The idea before commit 240c35a3 (which has just been reverted) was that we have the following FPU states: userspace (QEMU) guest --------------------------------------------------------------------------- processor vcpu->arch.guest_fpu >>> KVM_RUN: kvm_load_guest_fpu vcpu->arch.user_fpu processor >>> preempt out vcpu->arch.user_fpu current->thread.fpu >>> preempt in vcpu->arch.user_fpu processor >>> back to userspace >>> kvm_put_guest_fpu processor vcpu->arch.guest_fpu --------------------------------------------------------------------------- With the new lazy model we want to get the state back to the processor when schedule in from current->thread.fpu. Reported-by: NThomas Lambertz <mail@thomaslambertz.de> Reported-by: Nanthony <antdev66@gmail.com> Tested-by: Nanthony <antdev66@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Thomas Lambertz <mail@thomaslambertz.de> Cc: anthony <antdev66@gmail.com> Cc: stable@vger.kernel.org Fixes: 5f409e20 (x86/fpu: Defer FPU state load until return to userspace) Signed-off-by: NWanpeng Li <wanpengli@tencent.com> [Add a comment in front of the warning. - Paolo] Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
This reverts commit 240c35a3 ("kvm: x86: Use task structs fpu field for user", 2018-11-06). The commit is broken and causes QEMU's FPU state to be destroyed when KVM_RUN is preempted. Fixes: 240c35a3 ("kvm: x86: Use task structs fpu field for user") Cc: stable@vger.kernel.org Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Jan Kiszka 提交于
Letting this pend may cause nested_get_vmcs12_pages to run against an invalid state, corrupting the effective vmcs of L1. This was triggerable in QEMU after a guest corruption in L2, followed by a L1 reset. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Reviewed-by: NLiran Alon <liran.alon@oracle.com> Cc: stable@vger.kernel.org Fixes: 7f7f1ba3 ("KVM: x86: do not load vmcs12 pages while still in SMM") Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 20 7月, 2019 8 次提交
-
-
由 Eric Hankland 提交于
Updates KVM_CAP_PMU_EVENT_FILTER so it can also whitelist or blacklist fixed counters. Signed-off-by: NEric Hankland <ehankland@google.com> [No need to check padding fields for zero. - Paolo] Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
If a KVM guest is reset while running a nested guest, free_nested will disable the shadow VMCS execution control in the vmcs01. However, on the next KVM_RUN vmx_vcpu_run would nevertheless try to sync the VMCS12 to the shadow VMCS which has since been freed. This causes a vmptrld of a NULL pointer on my machime, but Jan reports the host to hang altogether. Let's see how much this trivial patch fixes. Reported-by: NJan Kiszka <jan.kiszka@siemens.com> Cc: Liran Alon <liran.alon@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
This is useful for debugging, and is ratelimited nowadays. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Like Xu 提交于
If a perf_event creation fails due to any reason of the host perf subsystem, it has no chance to log the corresponding event for guest which may cause abnormal sampling data in guest result. In debug mode, this message helps to understand the state of vPMC and we may not limit the number of occurrences but not in a spamming style. Suggested-by: NJoe Perches <joe@perches.com> Signed-off-by: NLike Xu <like.xu@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Wanpeng Li 提交于
Use kvm_vcpu_wake_up() in kvm_s390_vcpu_wakeup(). Suggested-by: NPaolo Bonzini <pbonzini@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NWanpeng Li <wanpengli@tencent.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Wanpeng Li 提交于
Inspired by commit 9cac38dd (KVM/s390: Set preempted flag during vcpu wakeup and interrupt delivery), we want to also boost not just lock holders but also vCPUs that are delivering interrupts. Most smp_call_function_many calls are synchronous, so the IPI target vCPUs are also good yield candidates. This patch introduces vcpu->ready to boost vCPUs during wakeup and interrupt delivery time; unlike s390 we do not reuse vcpu->preempted so that voluntarily preempted vCPUs are taken into account by kvm_vcpu_on_spin, but vmx_vcpu_pi_put is not affected (VT-d PI handles voluntary preemption separately, in pi_pre_block). Testing on 80 HT 2 socket Xeon Skylake server, with 80 vCPUs VM 80GB RAM: ebizzy -M vanilla boosting improved 1VM 21443 23520 9% 2VM 2800 8000 180% 3VM 1800 3100 72% Testing on my Haswell desktop 8 HT, with 8 vCPUs VM 8GB RAM, two VMs, one running ebizzy -M, the other running 'stress --cpu 2': w/ boosting + w/o pv sched yield(vanilla) vanilla boosting improved 1570 4000 155% w/ boosting + w/ pv sched yield(vanilla) vanilla boosting improved 1844 5157 179% w/o boosting, perf top in VM: 72.33% [kernel] [k] smp_call_function_many 4.22% [kernel] [k] call_function_i 3.71% [kernel] [k] async_page_fault w/ boosting, perf top in VM: 38.43% [kernel] [k] smp_call_function_many 6.31% [kernel] [k] async_page_fault 6.13% libc-2.23.so [.] __memcpy_avx_unaligned 4.88% [kernel] [k] call_function_interrupt Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Paul Mackerras <paulus@ozlabs.org> Cc: Marc Zyngier <maz@kernel.org> Signed-off-by: NWanpeng Li <wanpengli@tencent.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Liran Alon 提交于
When CPU raise #NPF on guest data access and guest CR4.SMAP=1, it is possible that CPU microcode implementing DecodeAssist will fail to read bytes of instruction which caused #NPF. This is AMD errata 1096 and it happens because CPU microcode reading instruction bytes incorrectly attempts to read code as implicit supervisor-mode data accesses (that is, just like it would read e.g. a TSS), which are susceptible to SMAP faults. The microcode reads CS:RIP and if it is a user-mode address according to the page tables, the processor gives up and returns no instruction bytes. In this case, GuestIntrBytes field of the VMCB on a VMEXIT will incorrectly return 0 instead of the correct guest instruction bytes. Current KVM code attemps to detect and workaround this errata, but it has multiple issues: 1) It mistakenly checks if guest CR4.SMAP=0 instead of guest CR4.SMAP=1, which is required for encountering a SMAP fault. 2) It assumes SMAP faults can only occur when guest CPL==3. However, in case guest CR4.SMEP=0, the guest can execute an instruction which reside in a user-accessible page with CPL<3 priviledge. If this instruction raise a #NPF on it's data access, then CPU DecodeAssist microcode will still encounter a SMAP violation. Even though no sane OS will do so (as it's an obvious priviledge escalation vulnerability), we still need to handle this semanticly correct in KVM side. Note that (2) *is* a useful optimization, because CR4.SMAP=1 is an easy triggerable condition and guests usually enable SMAP together with SMEP. If the vCPU has CR4.SMEP=1, the errata could indeed be encountered onlt at guest CPL==3; otherwise, the CPU would raise a SMEP fault to guest instead of #NPF. We keep this condition to avoid false positives in the detection of the errata. In addition, to avoid future confusion and improve code readbility, include details of the errata in code and not just in commit message. Fixes: 05d5a486 ("KVM: SVM: Workaround errata#1096 (insn_len maybe zero on SMAP violation)") Cc: Singh Brijesh <brijesh.singh@amd.com> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: NLiran Alon <liran.alon@oracle.com> Reviewed-by: NBrijesh Singh <brijesh.singh@amd.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Wanpeng Li 提交于
Dedicated instances are currently disturbed by unnecessary jitter due to the emulated lapic timers firing on the same pCPUs where the vCPUs reside. There is no hardware virtual timer on Intel for guest like ARM, so both programming timer in guest and the emulated timer fires incur vmexits. This patch tries to avoid vmexit when the emulated timer fires, at least in dedicated instance scenario when nohz_full is enabled. In that case, the emulated timers can be offload to the nearest busy housekeeping cpus since APICv has been found for several years in server processors. The guest timer interrupt can then be injected via posted interrupts, which are delivered by the housekeeping cpu once the emulated timer fires. The host should tuned so that vCPUs are placed on isolated physical processors, and with several pCPUs surplus for busy housekeeping. If disabled mwait/hlt/pause vmexits keep the vCPUs in non-root mode, ~3% redis performance benefit can be observed on Skylake server, and the number of external interrupt vmexits drops substantially. Without patch VM-EXIT Samples Samples% Time% Min Time Max Time Avg time EXTERNAL_INTERRUPT 42916 49.43% 39.30% 0.47us 106.09us 0.71us ( +- 1.09% ) While with patch: VM-EXIT Samples Samples% Time% Min Time Max Time Avg time EXTERNAL_INTERRUPT 6871 9.29% 2.96% 0.44us 57.88us 0.72us ( +- 4.02% ) Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NWanpeng Li <wanpengli@tencent.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 18 7月, 2019 1 次提交
-
-
由 Wanpeng Li 提交于
Commit 61abdbe0 ("kvm: x86: make lapic hrtimer pinned") pinned the lapic timer to avoid to wait until the next kvm exit for the guest to see KVM_REQ_PENDING_TIMER set. There is another solution to give a kick after setting the KVM_REQ_PENDING_TIMER bit, make lapic timer unpinned will be used in follow up patches. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NWanpeng Li <wanpengli@tencent.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 17 7月, 2019 1 次提交
-
-
由 Like Xu 提交于
To avoid semantic inconsistency, the fixed_counters in Intel vPMU need to be reset to 0 in intel_pmu_reset() as gp_counters does. Signed-off-by: NLike Xu <like.xu@linux.intel.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 16 7月, 2019 2 次提交
-
-
由 Liran Alon 提交于
As reported by Maxime at https://bugzilla.kernel.org/show_bug.cgi?id=204175: In vmx/nested.c::get_vmx_mem_address(), when the guest runs in long mode, the base address of the memory operand is computed with a simple: *ret = s.base + off; This is incorrect, the base applies only to FS and GS, not to the others. Because of that, if the guest uses a VMX instruction based on DS and has a DS.base that is non-zero, KVM wrongfully adds the base to the resulting address. Reported-by: NMaxime Villard <max@m00nbsd.net> Reviewed-by: NJoao Martins <joao.m.martins@oracle.com> Signed-off-by: NLiran Alon <liran.alon@oracle.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Yi Wang 提交于
The ioapic_debug and apic_debug have been not used for years, and kvm tracepoints are enough for debugging, so remove them as Paolo suggested. However, there may be something wrong when pv evi get/put user, so it's better to retain some log there. Signed-off-by: NYi Wang <wang.yi59@zte.com.cn> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 15 7月, 2019 5 次提交
-
-
由 Yi Wang 提交于
There are some pr_debug in TSC code, which may have been no use, so remove them as Paolo suggested. Signed-off-by: NYi Wang <wang.yi59@zte.com.cn> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Yi Wang 提交于
This fixes the following coccinelle warning: WARNING: return of 0/1 in function 'vmx_need_emulation_on_page_fault' with return type bool Return false instead of 0. Signed-off-by: NYi Wang <wang.yi59@zte.com.cn> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Arnd Bergmann 提交于
clang finds a contruct suspicious that converts an unsigned character to a signed integer and back, causing an overflow: arch/x86/kvm/mmu.c:4605:39: error: implicit conversion from 'int' to 'u8' (aka 'unsigned char') changes value from -205 to 51 [-Werror,-Wconstant-conversion] u8 wf = (pfec & PFERR_WRITE_MASK) ? ~w : 0; ~~ ^~ arch/x86/kvm/mmu.c:4607:38: error: implicit conversion from 'int' to 'u8' (aka 'unsigned char') changes value from -241 to 15 [-Werror,-Wconstant-conversion] u8 uf = (pfec & PFERR_USER_MASK) ? ~u : 0; ~~ ^~ arch/x86/kvm/mmu.c:4609:39: error: implicit conversion from 'int' to 'u8' (aka 'unsigned char') changes value from -171 to 85 [-Werror,-Wconstant-conversion] u8 ff = (pfec & PFERR_FETCH_MASK) ? ~x : 0; ~~ ^~ Add an explicit cast to tell clang that everything works as intended here. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Link: https://github.com/ClangBuiltLinux/linux/issues/95Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Arnd Bergmann 提交于
Clang notices a code path in which some variables are never initialized, but fails to figure out that this can never happen on i386 because is_64_bit_mode() always returns false. arch/x86/kvm/hyperv.c:1610:6: error: variable 'ingpa' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized] if (!longmode) { ^~~~~~~~~ arch/x86/kvm/hyperv.c:1632:55: note: uninitialized use occurs here trace_kvm_hv_hypercall(code, fast, rep_cnt, rep_idx, ingpa, outgpa); ^~~~~ arch/x86/kvm/hyperv.c:1610:2: note: remove the 'if' if its condition is always true if (!longmode) { ^~~~~~~~~~~~~~~ arch/x86/kvm/hyperv.c:1595:18: note: initialize the variable 'ingpa' to silence this warning u64 param, ingpa, outgpa, ret = HV_STATUS_SUCCESS; ^ = 0 arch/x86/kvm/hyperv.c:1610:6: error: variable 'outgpa' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized] arch/x86/kvm/hyperv.c:1610:6: error: variable 'param' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized] Flip the condition around to avoid the conditional execution on i386. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Jing Liu 提交于
AVX512 BFLOAT16 instructions support 16-bit BFLOAT16 floating-point format (BF16) for deep learning optimization. Intel adds AVX512 BFLOAT16 feature in CooperLake, which is CPUID.7.1.EAX[5]. Detailed information of the CPUID bit can be found here, https://software.intel.com/sites/default/files/managed/c5/15/\ architecture-instruction-set-extensions-programming-reference.pdf. Signed-off-by: NJing Liu <jing2.liu@linux.intel.com> [Fix type mismatch in min, changing constant "1" to "1u". - Paolo] Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 13 7月, 2019 14 次提交
-
-
由 Kees Cook 提交于
While jump_label_init() was moved earlier in the boot process in efd9e03f ("arm64: Use static keys for CPU features"), it wasn't early enough for early params to use it. The old state of things was as described here... init/main.c calls out to arch-specific things before general jump label and early param handling: asmlinkage __visible void __init start_kernel(void) { ... setup_arch(&command_line); ... smp_prepare_boot_cpu(); ... /* parameters may set static keys */ jump_label_init(); parse_early_param(); ... } x86 setup_arch() wants those earlier, so it handles jump label and early param: void __init setup_arch(char **cmdline_p) { ... jump_label_init(); ... parse_early_param(); ... } arm64 setup_arch() only had early param: void __init setup_arch(char **cmdline_p) { ... parse_early_param(); ... } with jump label later in smp_prepare_boot_cpu(): void __init smp_prepare_boot_cpu(void) { ... jump_label_init(); ... } This moves arm64 jump_label_init() from smp_prepare_boot_cpu() to setup_arch(), as done already on x86, in preparation from early param usage in the init_on_alloc/free() series: https://lkml.kernel.org/r/1561572949.5154.81.camel@lca.pw Link: http://lkml.kernel.org/r/201906271003.005303B52@keescookSigned-off-by: NKees Cook <keescook@chromium.org> Acked-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: NCatalin Marinas <catalin.marinas@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Qian Cai <cai@lca.pw> Cc: Will Deacon <will@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Anshuman Khandual 提交于
Drop the pgtable_t variable from all implementation for pte_fn_t as none of them use it. apply_to_pte_range() should stop computing it as well. Should help us save some cycles. Link: http://lkml.kernel.org/r/1556803126-26596-1-git-send-email-anshuman.khandual@arm.comSigned-off-by: NAnshuman Khandual <anshuman.khandual@arm.com> Acked-by: NMatthew Wilcox <willy@infradead.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: <jglisse@redhat.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mike Rapoport 提交于
Replace __get_free_page() and alloc_pages() calls with the generic __pte_alloc_one_kernel() and __pte_alloc_one(). There is no functional change for the kernel PTE allocation. The difference for the user PTEs, is that the clear_pte_table() is now called after pgtable_page_ctor() and the addition of __GFP_ACCOUNT to the GFP flags. The pte_free() and pte_free_kernel() versions are identical to the generic ones and can be simply dropped. Link: http://lkml.kernel.org/r/1557296232-15361-15-git-send-email-rppt@linux.ibm.comSigned-off-by: NMike Rapoport <rppt@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Helge Deller <deller@gmx.de> Cc: Ley Foon Tan <lftan@altera.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@armlinux.org.uk> Cc: Sam Creasey <sammy@sammy.net> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Guo Ren <ren_guo@c-sky.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mike Rapoport 提交于
um allocates PTE pages with __get_free_page() and uses GFP_KERNEL | __GFP_ZERO for the allocations. Switch it to the generic version that does exactly the same thing for the kernel page tables and adds __GFP_ACCOUNT for the user PTEs. The pte_free() and pte_free_kernel() versions are identical to the generic ones and can be simply dropped. Link: http://lkml.kernel.org/r/1557296232-15361-14-git-send-email-rppt@linux.ibm.comSigned-off-by: NMike Rapoport <rppt@linux.ibm.com> Reviewed-by: NAnton Ivanov <anton.ivanov@cambridgegreys.com> Acked-by: NAnton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> Cc: Helge Deller <deller@gmx.de> Cc: Ley Foon Tan <lftan@altera.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@armlinux.org.uk> Cc: Sam Creasey <sammy@sammy.net> Cc: Vincent Chen <deanbo422@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mike Rapoport 提交于
The only difference between the generic and RISC-V implementation of PTE allocation is the usage of __GFP_RETRY_MAYFAIL for both kernel and user PTEs and the absence of __GFP_ACCOUNT for the user PTEs. The conversion to the generic version removes the __GFP_RETRY_MAYFAIL and ensures that GFP_ACCOUNT is used for the user PTE allocations. The pte_free() and pte_free_kernel() versions are identical to the generic ones and can be simply dropped. Link: http://lkml.kernel.org/r/1557296232-15361-13-git-send-email-rppt@linux.ibm.comSigned-off-by: NMike Rapoport <rppt@linux.ibm.com> Reviewed-by: NPalmer Dabbelt <palmer@sifive.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> Cc: Helge Deller <deller@gmx.de> Cc: Ley Foon Tan <lftan@altera.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@armlinux.org.uk> Cc: Sam Creasey <sammy@sammy.net> Cc: Vincent Chen <deanbo422@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mike Rapoport 提交于
parisc allocates PTE pages with __get_free_page() and uses GFP_KERNEL | __GFP_ZERO for the allocations. Switch it to the generic version that does exactly the same thing for the kernel page tables and adds __GFP_ACCOUNT for the user PTEs. The pte_free_kernel() and pte_free() versions on are identical to the generic ones and can be simply dropped. Link: http://lkml.kernel.org/r/1557296232-15361-12-git-send-email-rppt@linux.ibm.comSigned-off-by: NMike Rapoport <rppt@linux.ibm.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> Cc: Helge Deller <deller@gmx.de> Cc: Ley Foon Tan <lftan@altera.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@armlinux.org.uk> Cc: Sam Creasey <sammy@sammy.net> Cc: Vincent Chen <deanbo422@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mike Rapoport 提交于
nios2 allocates kernel PTE pages with __get_free_pages(GFP_KERNEL | __GFP_ZERO, PTE_ORDER); and user page tables with pte = alloc_pages(GFP_KERNEL, PTE_ORDER); if (pte) clear_highpage(); The PTE_ORDER is hardwired to zero, which makes nios2 implementation almost identical to the generic one. Switch nios2 to the generic version that does exactly the same thing for the kernel page tables and adds __GFP_ACCOUNT for the user PTEs. The pte_free_kernel() and pte_free() versions on nios2 are identical to the generic ones and can be simply dropped. Link: http://lkml.kernel.org/r/1557296232-15361-11-git-send-email-rppt@linux.ibm.comSigned-off-by: NMike Rapoport <rppt@linux.ibm.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> Cc: Helge Deller <deller@gmx.de> Cc: Ley Foon Tan <lftan@altera.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@armlinux.org.uk> Cc: Sam Creasey <sammy@sammy.net> Cc: Vincent Chen <deanbo422@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mike Rapoport 提交于
The nds32 implementation of pte_alloc_one_kernel() differs from the generic in the use of __GFP_RETRY_MAYFAIL flag, which is removed after the conversion. The nds32 version of pte_alloc_one() missed the call to pgtable_page_ctor() and also used __GFP_RETRY_MAYFAIL. Switching it to use generic __pte_alloc_one() for the PTE page allocation ensures that page table constructor is run and the user page tables are allocated with __GFP_ACCOUNT. The conversion to the generic version of pte_free_kernel() removes the NULL check for pte. The pte_free() version on nds32 is identical to the generic one and can be simply dropped. Link: http://lkml.kernel.org/r/1557296232-15361-10-git-send-email-rppt@linux.ibm.comSigned-off-by: NMike Rapoport <rppt@linux.ibm.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> Cc: Helge Deller <deller@gmx.de> Cc: Ley Foon Tan <lftan@altera.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@armlinux.org.uk> Cc: Sam Creasey <sammy@sammy.net> Cc: Vincent Chen <deanbo422@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mike Rapoport 提交于
MIPS allocates kernel PTE pages with __get_free_pages(GFP_KERNEL | __GFP_ZERO, PTE_ORDER) and user PTE pages with pte = alloc_pages(GFP_KERNEL, PTE_ORDER) and then uses clear_highpage(pte) to zero out the allocated page for the user page tables. The PTE_ORDER is hardwired to zero, which makes MIPS implementation almost identical to the generic one. Switch MIPS to the generic version that does exactly the same thing for the kernel page tables and adds __GFP_ACCOUNT for the user PTEs. The pte_free_kernel() and pte_free() versions on mips are identical to the generic ones and can be simply dropped. Link: http://lkml.kernel.org/r/1557296232-15361-9-git-send-email-rppt@linux.ibm.comSigned-off-by: NMike Rapoport <rppt@linux.ibm.com> Acked-by: NPaul Burton <paul.burton@mips.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> Cc: Helge Deller <deller@gmx.de> Cc: Ley Foon Tan <lftan@altera.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@armlinux.org.uk> Cc: Sam Creasey <sammy@sammy.net> Cc: Vincent Chen <deanbo422@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mike Rapoport 提交于
The sun3 MMU variant of m68k uses GFP_KERNEL to allocate a PTE page and then memset(0) or clear_highpage() to clear it. This is equivalent to allocating the page with GFP_KERNEL | __GFP_ZERO, which allows replacing sun3 implementation of pte_alloc_one() and pte_alloc_one_kernel() with the generic ones. The pte_free() and pte_free_kernel() versions are identical to the generic ones and can be simply dropped. Link: http://lkml.kernel.org/r/1557296232-15361-8-git-send-email-rppt@linux.ibm.comSigned-off-by: NMike Rapoport <rppt@linux.ibm.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> Cc: Helge Deller <deller@gmx.de> Cc: Ley Foon Tan <lftan@altera.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@armlinux.org.uk> Cc: Sam Creasey <sammy@sammy.net> Cc: Vincent Chen <deanbo422@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mike Rapoport 提交于
The csky implementation pte_alloc_one(), pte_free_kernel() and pte_free() is identical to the generic except of lack of __GFP_ACCOUNT for the user PTEs allocation. Switch csky to use generic version of these functions. The csky implementation of pte_alloc_one_kernel() is not replaced because it does not clear the allocated page but rather sets each PTE in it to a non-zero value. The pte_free_kernel() and pte_free() versions on csky are identical to the generic ones and can be simply dropped. Link: http://lkml.kernel.org/r/1557296232-15361-6-git-send-email-rppt@linux.ibm.comSigned-off-by: NMike Rapoport <rppt@linux.ibm.com> Acked-by: NGuo Ren <ren_guo@c-sky.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Helge Deller <deller@gmx.de> Cc: Ley Foon Tan <lftan@altera.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@armlinux.org.uk> Cc: Sam Creasey <sammy@sammy.net> Cc: Vincent Chen <deanbo422@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mike Rapoport 提交于
The PTE allocations in arm64 are identical to the generic ones modulo the GFP flags. Using the generic pte_alloc_one() functions ensures that the user page tables are allocated with __GFP_ACCOUNT set. The arm64 definition of PGALLOC_GFP is removed and replaced with GFP_PGTABLE_USER for p[gum]d_alloc_one() for the user page tables and GFP_PGTABLE_KERNEL for the kernel page tables. The KVM memory cache is now using GFP_PGTABLE_USER. The mappings created with create_pgd_mapping() are now using GFP_PGTABLE_KERNEL. The conversion to the generic version of pte_free_kernel() removes the NULL check for pte. The pte_free() version on arm64 is identical to the generic one and can be simply dropped. [cai@lca.pw: fix a bogus GFP flag in pgd_alloc()] Link: https://lore.kernel.org/r/1559656836-24940-1-git-send-email-cai@lca.pw/ [and fix it more] Link: https://lore.kernel.org/linux-mm/20190617151252.GF16810@rapoport-lnx/ Link: http://lkml.kernel.org/r/1557296232-15361-5-git-send-email-rppt@linux.ibm.comSigned-off-by: NMike Rapoport <rppt@linux.ibm.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> Cc: Helge Deller <deller@gmx.de> Cc: Ley Foon Tan <lftan@altera.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@armlinux.org.uk> Cc: Sam Creasey <sammy@sammy.net> Cc: Vincent Chen <deanbo422@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mike Rapoport 提交于
Replace __get_free_page() and alloc_pages() calls with the generic __pte_alloc_one_kernel() and __pte_alloc_one(). There is no functional change for the kernel PTE allocation. The difference for the user PTEs, is that the clear_pte_table() is now called after pgtable_page_ctor() and the addition of __GFP_ACCOUNT to the GFP flags. The conversion to the generic version of pte_free_kernel() removes the NULL check for pte. The pte_free() version on arm is identical to the generic one and can be simply dropped. Link: http://lkml.kernel.org/r/1557296232-15361-4-git-send-email-rppt@linux.ibm.comSigned-off-by: NMike Rapoport <rppt@linux.ibm.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> Cc: Helge Deller <deller@gmx.de> Cc: Ley Foon Tan <lftan@altera.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@armlinux.org.uk> Cc: Sam Creasey <sammy@sammy.net> Cc: Vincent Chen <deanbo422@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mike Rapoport 提交于
alpha allocates PTE pages with __get_free_page() and uses GFP_KERNEL | __GFP_ZERO for the allocations. Switch it to the generic version that does exactly the same thing for the kernel page tables and adds __GFP_ACCOUNT for the user PTEs. The alpha pte_free() and pte_free_kernel() versions are identical to the generic ones and can be simply dropped. Link: http://lkml.kernel.org/r/1557296232-15361-3-git-send-email-rppt@linux.ibm.comSigned-off-by: NMike Rapoport <rppt@linux.ibm.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> Cc: Helge Deller <deller@gmx.de> Cc: Ley Foon Tan <lftan@altera.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@armlinux.org.uk> Cc: Sam Creasey <sammy@sammy.net> Cc: Vincent Chen <deanbo422@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-