- 03 12月, 2006 25 次提交
-
-
由 YOSHIFUJI Hideaki 提交于
Based on implementation by Rick Payne. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gerrit Renker 提交于
Throughout the TCP/DCCP (and tunnelling) code, it often happens that the return code of a transmit function needs to be tested against NET_XMIT_CN which is a value that does not indicate a strict error condition. This patch uses a macro for these recurring situations which is consistent with the already existing macro net_xmit_errno, saving on duplicated code. Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
-
由 Brian Haley 提交于
Only change upper-layer checksum from 0 to 0xFFFF for UDP (as RFC 768 states), not for others as RFC 4443 doesn't require it. Signed-off-by: NBrian Haley <brian.haley@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Noticed by Al Viro: (frh->tos & ~IPV6_FLOWINFO_MASK)) where IPV6_FLOWINFO_MASK is htonl(0xfffffff) and frh->tos is u8, which makes no sense here... Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Account for the netlink message header size directly in nlmsg_new() instead of relying on the caller calculate it correctly. Replaces error handling of message construction functions when constructing notifications with bug traps since a failure implies a bug in calculating the size of the skb. Signed-off-by: NThomas Graf <tgraf@suug.ch> Acked-by: NPaul Moore <paul.moore@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gerrit Renker 提交于
This removes two redundancies: 1) The test (skb->protocol == htons(ETH_P_IPV6) in tcp_v6_init_sequence() is always true, due to * tcp_v6_conn_request() is the only function calling this one * tcp_v6_conn_request() redirects all skb's with ETH_P_IP protocol to tcp_v4_conn_request() [ cf. top of tcp_v6_conn_request()] 2) The first argument, `struct sock *sk' of tcp_v{4,6}_init_sequence() is never used. Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki 提交于
For IP MIB (RFC4293). Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 YOSHIFUJI Hideaki 提交于
Otherwise, we will see a lot of casts... Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 YOSHIFUJI Hideaki 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 YOSHIFUJI Hideaki 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 David S. Miller 提交于
The data itself is already charged to the SKB, doing the skb_set_owner_w() just generates a lot of noise and extra atomics we don't really need. Lmbench improvements on lat_tcp are minimal: before: TCP latency using localhost: 23.2701 microseconds TCP latency using localhost: 23.1994 microseconds TCP latency using localhost: 23.2257 microseconds after: TCP latency using localhost: 22.8380 microseconds TCP latency using localhost: 22.9465 microseconds TCP latency using localhost: 22.8462 microseconds Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
We currently allocate a fixed size (TCP_SYNQ_HSIZE=512) slots hash table for each LISTEN socket, regardless of various parameters (listen backlog for example) On x86_64, this means order-1 allocations (might fail), even for 'small' sockets, expecting few connections. On the contrary, a huge server wanting a backlog of 50000 is slowed down a bit because of this fixed limit. This patch makes the sizing of listen hash table a dynamic parameter, depending of : - net.core.somaxconn tunable (default is 128) - net.ipv4.tcp_max_syn_backlog tunable (default : 256, 1024 or 128) - backlog value given by user application (2nd parameter of listen()) For large allocations (bigger than PAGE_SIZE), we use vmalloc() instead of kmalloc(). We still limit memory allocation with the two existing tunables (somaxconn & tcp_max_syn_backlog). So for standard setups, this patch actually reduce RAM usage. Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Move the attribute policy for the non-specific attributes into net/fib_rules.h and include it in the respective protocols. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Move mark selector currently implemented per protocol into the protocol independant part. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Now that all protocols have been made aware of the mark field it can be moved out of the union thus simplyfing its usage. The config options in the IPv4/IPv6/DECnet subsystems to enable respectively disable mark based routing only obfuscate the code with ifdefs, the cost for the additional comparison in the flow key is insignificant, and most distributions have all these options enabled by default anyway. Therefore it makes sense to remove the config options and enable mark based routing by default. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
nfmark is being used in various subsystems and has become the defacto mark field for all kinds of packets. Therefore it makes sense to rename it to `mark' and remove the dependency on CONFIG_NETFILTER. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
MAX_HEADER does not include the ipv6 header length in it, so we need to add it in explicitly. With help from YOSHIFUJI Hideaki. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 11月, 2006 6 次提交
-
-
由 YOSHIFUJI Hideaki 提交于
TCP and RAW do not have this issue. Closes Bug #7432. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yasuyuki Kozakai 提交于
Signed-off-by: NYasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp> Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 Yasuyuki Kozakai 提交于
Signed-off-by: NYasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp> Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 YOSHIFUJI Hideaki 提交于
RFC4191 explicitly states that the procedures are applicable to hosts only. We should not have changed behavior of routers. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 YOSHIFUJI Hideaki 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 YOSHIFUJI Hideaki 提交于
Only routers in "FAILED" state should be considered unreachable. Otherwise, we do not try to use speicific routes unless all least specific routers are considered unreachable. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
- 16 11月, 2006 2 次提交
-
-
由 Patrick McHardy 提交于
nexthdr is NEXTHDR_FRAGMENT, the nexthdr value from the fragment header is hp->nexthdr. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Based on patch by James D. Nurmi: I've got some code very dependant on nfnetlink_queue, and turned up a large number of warns coming from skb_trim. While it's quite possibly my code, having not seen it on older kernels made me a bit suspect. Anyhow, based on some googling I turned up this thread: http://lkml.org/lkml/2006/8/13/56 And believe the issue to be related, so attached is a small patch to the kernel -- not sure if this is completely correct, but for anyone else hitting the WARN_ON(1) in skbuff.h, it might be helpful.. Signed-off-by: NJames D. Nurmi <jdnurmi@gmail.com> Ported to ip6_queue and nfnetlink_queue and added return value checks. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 11月, 2006 2 次提交
-
-
由 Patrick McHardy 提交于
It would be nice to keep things working even with this built as a module, it took me some time to realize my IPv6 tunnel was broken because of the missing sit module. This module alias fixes things until distributions have added an appropriate alias to modprobe.conf. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dmitry Mishin 提交于
If inet6_init() fails later than ndisc_init() call, or IPv6 module is unloaded, ndisc_netdev_notifier call remains in the list and will follows in oops later. Signed-off-by: NDmitry Mishin <dim@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 11月, 2006 1 次提交
-
-
由 Al Viro 提交于
In theory these are opaque 32bit values. However, we end up allocating them sequentially in host-endian and stick unchanged on the wire. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 31 10月, 2006 4 次提交
-
-
由 James Morris 提交于
There's a bug in the seqfile show operation for flowlabel objects, where each hash chain is traversed cumulatively for each element. The following function is called for each element of each chain: static void ip6fl_fl_seq_show(struct seq_file *seq, struct ip6_flowlabel *fl) { while(fl) { seq_printf... fl = fl->next; } } Thus, objects can appear mutliple times when reading /proc/net/ip6_flowlabel, as the above is called for each element in the chain. The solution is to remove the while() loop from the above, and traverse each chain exactly once, per the patch below. This also removes the ip6fl_fl_seq_show() function, which does nothing else. Signed-off-by: NJames Morris <jmorris@namei.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 James Morris 提交于
Currently, when an application requests a lease for a flowlabel via the IPV6_FLOWLABEL_MGR socket option, no error is returned if an invalid type of destination address is supplied as part of the request, leading to a silent failure. This patch ensures that EINVAL is returned to the application in this case. Signed-off-by: NJames Morris <jmorris@namei.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dmitry Mishin 提交于
There is a number of issues in parsing user-provided table in translate_table(). Malicious user with CAP_NET_ADMIN may crash system by passing special-crafted table to the *_tables. The first issue is that mark_source_chains() function is called before entry content checks. In case of standard target, mark_source_chains() function uses t->verdict field in order to determine new position. But the check, that this field leads no further, than the table end, is in check_entry(), which is called later, than mark_source_chains(). The second issue, that there is no check that target_offset points inside entry. If so, *_ITERATE_MATCH macro will follow further, than the entry ends. As a result, we'll have oops or memory disclosure. And the third issue, that there is no check that the target is completely inside entry. Results are the same, as in previous issue. Signed-off-by: NDmitry Mishin <dim@openvz.org> Acked-by: NKirill Korotaev <dev@openvz.org> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-