- 09 12月, 2014 4 次提交
-
-
由 Linus Torvalds 提交于
Merge tag 'hwmon-for-linus-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon updates from Guenter Roeck: "Notable changes: - new driver for NCT7802Y - support for TMP435, LM95233, LM95235, NCT6792D, and NXP LM75B - regulator support for PMBus chips, specifically LTX2978 - support for humidity sensors to iio-hwmon bridge driver * tag 'hwmon-for-linus-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (21 commits) hwmon: (tmp401) Detect TMP435 on all addresses it supports hwmon: (lm75) Strengthen detect function hwmon: (gpio-fan) Add a shutdown handler to poweroff the fans hwmon: (gpio-fan) Allow usage of gpio operations that may sleep hwmon: (tmp401) Bail out from tmp401_probe() in case of write errors hwmon: (tmp401) Add support for TI TMP435 hwmon: (lm95234) Add support for LM95233 hwmon: (lm95245) Add support for LM95235 hwmon: (ina2xx) bail-out from ina2xx_probe() in case of configuration errors hwmon: (nct6775) Add blank lines after declarations hwmon: (nct6775) Add support for NCT6792D hwmon: (nct6775) Documentation updates hwmon: (lm75) Add support for the NXP LM75B hwmon: Driver for Nuvoton NCT7802Y hwmon: (ibmpowernv) Convert to module_platform_driver hwmon: (ibmpowernv) Use platform 'id_table' to probe the device hwmon: (iio_hwmon) Add support for humidity sensors hwmon: (ltc2978) Add regulator support hwmon: (pmbus) Add regulator support hwmon: (pmbus) add helpers for byte write and read modify write ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp由 Linus Torvalds 提交于
Pull EDAC updates from Borislav Petkov: "EDAC updates all over the place: - Enablement for AMD F15h models 0x60 CPUs. Most notably DDR4 RAM support. Out of tree stuff is adding the required PCI IDs. From Aravind Gopalakrishnan. - Enable amd64_edac for 32-bit due to popular demand. From Tomasz Pala. - Convert the AMD MCE injection module to debugfs, where it belongs. - Misc EDAC cleanups" * tag 'edac_for_3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: EDAC, MCE, AMD: Correct formatting of decoded text EDAC, mce_amd_inj: Add an injector function EDAC, mce_amd_inj: Add hw-injection attributes EDAC, mce_amd_inj: Enable direct writes to MCE MSRs EDAC, mce_amd_inj: Convert mce_amd_inj module to debugfs EDAC: Delete unnecessary check before calling pci_dev_put() EDAC, pci_sysfs: remove unneccessary ifdef around entire file ghes_edac: Use snprintf() to silence a static checker warning amd64_edac: Build module on x86-32 EDAC, MCE, AMD: Add decoding table for MC6 xec amd64_edac: Add F15h M60h support {mv64x60,ppc4xx}_edac,: Remove deprecated IRQF_DISABLED EDAC: Sync memory types and names EDAC: Add DDR3 LRDIMM entries to edac_mem_types x86, amd_nb: Add device IDs to NB tables for F15h M60h pci_ids: Add PCI device IDs for F15h M60h
-
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd由 Linus Torvalds 提交于
Pull MFD updates from Lee Jones: "Changes to the core: - Honour PLATFORM_DEVID_NONE and PLATFORM_DEVID_AUTO dev IDs Changes to existing drivers: - IRQ additions/fixes; axp20x, da9063-core - Code simplification; i2c-dln2 - Regmap additions/fixes; max77693 - Error checking/handling improvements; dln2, db8500-prcmu - Bug fixes; dln2, wm8350-core - DT support/documentation; max77693, max77686, tps65217, twl4030-power, gpio-tc3589x - Decouple syscon interface from platform devices - Use MFD hotplug registration; rtsx_usb, viperboard, hid-sensor-hub - Regulator fixups; sec-core - Power Management additions/fixes; rts5227, tc6393xb - Remove relic/redundant code; ab8500-sysctrl, lpc_sch, max77693-private - Clean-up/coding style changes; tps65090 - Clk additions/fixes; tc6393xb, tc6387xb, t7l66xb - Add USB-SPI support; dln2 - Trivial changes; max14577, arizona-spi, lpc_sch, wm8997-tables, wm5102-tables wm5110-tables, axp20x, atmel-hlcdc, rtsx_pci New drivers/supported devices: - axp288 PMIC support added to axp20x - s2mps13 support added to sec-core - New support for Diolan DLN-2 - New support for atmel-hlcdc" * tag 'mfd-for-linus-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (55 commits) mfd: rtsx: Add func to split u32 into register mfd: atmel-hlcdc: Add Kconfig option description and name mfd: da9063: Get irq base dynamically before registering device mfd: max14577: Fix obvious typo in company name in copyright mfd: axp20x: Constify axp20x_acpi_match and rid unused warning mfd: t7l66xb: prepare/unprepare clocks mfd: tc6387xb: prepare/unprepare clocks mfd: dln2: add support for USB-SPI module mfd: wm5110: Add missing registers for AIF2 channels 3-6 mfd: tc3589x: get rid of static base mfd: arizona: Document HP_CTRL_1L and HP_CTRL_1R registers mfd: wm8997: Mark INTERRUPT_STATUS_2_MASK as readable mfd: tc6393xb: Prepare/unprepare clocks mfd: tps65090: Fix bonkers indenting strategy mfd: tc6393xb: Fail ohci suspend if full state restore is required mfd: lpc_sch: Don't call mfd_remove_devices() mfd: wm8350-core: Fix probable mask then right shift defect mfd: ab8500-sysctrl: Drop ab8500_restart mfd: db8500-prcmu: Provide sane error path values mfd: db8500-prcmu: Check return of devm_ioremap for error ...
-
git://git.linaro.org/people/ulf.hansson/mmc由 Linus Torvalds 提交于
Pull MMC updates from Ulf Hansson: "MMC core: - Consolidation and cleanups. - Some improvements regarding error handling. - Increase maximum amount of block devices. - Use correct OCR mask for SDIO when restoring power. - Fix prepared requests while doing BKOPS. - Convert to modern PM ops. - Add mmc_send_tuning() API and convert some hosts to use it. MMC host: - toshsd: New Toshiba PCI SD controller driver. - sdhci: 64-bit ADMA support. - sdhci: Some regulator fixes. - sdhci: HS400 support. - sdhci: Various fixes cleanups. - atmel-mci: Modernization and cleanups. - atmel-mci: Runtime PM support. - omap_hsmmc: Modernization and cleanups. - omap_hsmmc: Fix UHS card with DDR50 support. - dw_mmc: Support for ARM64 and Exynos 7 variant. - dw_mmc: Add support for IMG Pistachio variant. - dw_mmc: Various fixes and cleanups. - mvsdio: DMA fixes. - mxs-mmc: Modernization and cleanups. - mxcmmc: Various fixes" * tag 'mmc-v3.19-1' of git://git.linaro.org/people/ulf.hansson/mmc: (126 commits) mmc: sdhci-msm: Convert to mmc_send_tuning() mmc: sdhci-esdhc-imx: Convert to mmc_send_tuning() mmc: core: Let mmc_send_tuning() to take struct mmc_host* as parameter mmc: queue: Improve error handling during allocation of bounce buffers mmc: sdhci-acpi: Add two host capabilities for Intel mmc: sdhci-pci: Add two host capabilities for BYT mmc: sdhci-acpi: Add SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC mmc: sdhci-pci: Add SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC to BYT mmc: atmel-mci: use probe deferring if dma controller is not ready yet mmc: atmel-mci: stop using specific initcall mmc: atmel-mci: remove __init/__exit attributes mmc: atmel-mci: remove useless DMA stuff for non-dt devices mmc: omap_hsmmc: Fix UHS card with DDR50 support mmc: core: add core-level function for sending tuning commands mmc: core: hold SD Clock before CMD11 during Signal mmc: mxs-mmc: Check for clk_prepare_enable() error mmc: mxs-mmc: Propagate the real error mmc: mxs-mmc: No need to do NULL check on 'iores' mmc: dw_mmc: Add support for IMG Pistachio mmc: mxs-mmc: Simplify PM hooks ...
-
- 08 12月, 2014 7 次提交
-
-
由 Guenter Roeck 提交于
TMP435 supports a range of I2C addresses, not just 0x4c. Cc: Patrick Titiano <ptitiano@baylibre.com> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: NJean Delvare <jdelvare@suse.de> Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
-
由 Micky Ching 提交于
Add helper function to write u32 to registers, if we want to put u32 value to 4 continuous register, this can help us reduce tedious work. Signed-off-by: NMicky Ching <micky_ching@realsil.com.cn> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Ulf Hansson 提交于
Instead of having a local hack taking care of sending the tuning command and as well to verify the response pattern, let's convert to the common mmc_send_tuning() API instead. Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org> Tested-by: NGeorgi Djakov <gdjakov@mm-sol.com> Acked-by: NGeorgi Djakov <gdjakov@mm-sol.com> Reviewed-by: NStephen Boyd <sboyd@codeaurora.org>
-
由 Ulf Hansson 提交于
Instead of having a local function taking care of sending the tuning command, let's use the common mmc_send_tuning() API provided by the mmc core. In this way the request will be handled as any other request by sdhci core. As an effect of this change, the pm_runtime_get_sync() call at esdhc_prepare_tuning() isn't needed any more. This patch will also introduce another change in behavior, since before the response pattern to the tuning command wasn't verified by sdhci-esdhc-imx. The mmc_send_tuning() does that. Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org> Tested-by: NDong Aisheng <b29396@freescale.com> Acked-by: NDong Aisheng <b29396@freescale.com>
-
由 Ulf Hansson 提交于
To be able to use mmc_send_tuning() prior the struct mmc_card has been allocated, let's convert it to take the struct mmc_host* as parameter instead. Suggested-by: NStephen Boyd <sboyd@codeaurora.org> Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org> Acked-by: NDong Aisheng <b29396@freescale.com> Reviewed-by: NStephen Boyd <sboyd@codeaurora.org>
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata由 Linus Torvalds 提交于
Pull libata fixes from Tejun Heo: "Three libata fixes for v3.18. Nothing too interesting. PCI ID ID and quirk additions to ahci and an error handling path fix in sata_fsl" * 'for-3.18-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ahci: disable MSI on SAMSUNG 0xa800 SSD sata_fsl: fix error handling of irq_of_parse_and_map AHCI: Add DeviceIDs for Sunrise Point-LP SATA controller
-
- 07 12月, 2014 2 次提交
-
-
git://www.linux-watchdog.org/linux-watchdog由 Linus Torvalds 提交于
Pull watchdog fix from Wim Van Sebroeck: "Fix the watchdog mask bit offset for Exynos7" * git://www.linux-watchdog.org/linux-watchdog: watchdog: s3c2410_wdt: Fix the mask bit offset for Exynos7
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux由 Linus Torvalds 提交于
Pull i2c fixes from Wolfram Sang: "Here are two more driver bugfixes for I2C which would be good to have" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: cadence: Set the hardware time-out register to maximum value i2c: davinci: generate STP always when NACK is received
-
- 06 12月, 2014 4 次提交
-
-
由 Abhilash Kesavan 提交于
The watchdog mask bit offset listed for Exynos7 is incorrect. Fix this. Signed-off-by: NAbhilash Kesavan <a.kesavan@samsung.com> Acked-by: Naveen Krishna Chatradhi <naveenkrishna.ch@gmail.com Reviewd-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Thomas Gleixner: "Two final fixlets for 3.18: - Prevent microcode reload wreckage on 32bit - Unbreak cross compilation" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, microcode: Limit the microcode reloading to 64-bit for now x86: Use $(OBJDUMP) instead of plain objdump
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound fixlet from Takashi Iwai: "Just one commit for adding a copule of HD-audio quirk entries" * tag 'sound-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/realtek - Add headset Mic support for new Dell machine
-
由 Guenter Roeck 提交于
A chip returning 0x00 in all registers is erroneously detected as LM75. Check hysteresis and temperature limit registers and abort if both are 0 to reduce the likelyhood for this to happen. Reviewed-by: NRob Coulson <rob.coulson@gmail.com> Reviewed-by: NJean Delvare <jdelvare@suse.de> Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
-
- 05 12月, 2014 13 次提交
-
-
由 Bhuvanesh Surachari 提交于
Allocation of previous bounce buffer in mmc_init_queue when the current bounce buffer allocation fails was leading to a crash later in __blk_segment_map_sg. Error handling is improved by allocating previous bounce buffer only if the current bounce buffer allocation succeeds. Signed-off-by: NBhuvanesh Surachari <bhuvanesh_surachari@mentor.com> Signed-off-by: NHarish Jenny K N <harish_kandiga@mentor.com> Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm intel fixes from Dave Airlie: "Two intel stable fixes, that should be it from me for this round" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/i915: Unlock panel even when LVDS is disabled drm/i915: More cautious with pch fifo underruns
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull ACPI backlight fix from Rafael Wysocki: "This is a simple fix for an ACPI backlight regression introduced by a recent commit that overlooked a corner case which should have been taken into account" * tag 'pm+acpi-3.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / video: update condition to check if device is in _DOD list
-
git://anongit.freedesktop.org/drm-intel由 Dave Airlie 提交于
Silence some pch fifo underrun reports and panel locking backtraces, both cc: stable. * tag 'drm-intel-fixes-2014-12-04' of git://anongit.freedesktop.org/drm-intel: drm/i915: Unlock panel even when LVDS is disabled drm/i915: More cautious with pch fifo underruns
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media由 Linus Torvalds 提交于
Pull media fixes from Mauro Carvalho Chehab: "A core fix and some driver fixes: - regression fix in Remote Controller core affecting RC6 protocol handling - fix video buffer handling in cx23885 - race fix in solo6x10 - fix image selection in smiapp - fix reported payload size on s2255drv - two updates for MAINTAINERS file" * tag 'media/v3.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] rc-core: fix toggle handling in the rc6 decoder MAINTAINERS: Update mchehab's addresses [media] cx23885: use sg = sg_next(sg) instead of sg++ [media] s2255drv: fix payload size for JPG, MJPEG [media] Update MAINTAINERS for solo6x10 [media] solo6x10: fix a race in IRQ handler [media] smiapp: Only some selection targets are settable
-
由 Masahiro Yamada 提交于
A typo "header=y" was introduced by commit 7071cf7f ("uapi: add missing network related headers to kbuild"). Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: David Miller <davem@davemloft.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nishanth Menon 提交于
Poweroff the fans when shutting down the system. Else, echo '1' > /sys/class/hwmon/hwmon0/fan1_target; poweroff leaves the fan running if the System power off does not drive the gpio expander which might control the fan power supply. Signed-off-by: NNishanth Menon <nm@ti.com> Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
-
由 Nishanth Menon 提交于
Certain I2C based GPIO expanders could be used in sleepable context, this results in: [ 115.890569] ------------[ cut here ]------------ [ 115.895422] WARNING: CPU: 0 PID: 1115 at drivers/gpio/gpiolib.c:1370 gpiod_set_raw_value+0x40/0x4c() [ 115.905024] Modules linked in: [ 115.908229] CPU: 0 PID: 1115 Comm: sh Tainted: G W 3.18.0-rc7-next-20141203-dirty #1 [ 115.917461] Hardware name: Generic DRA74X (Flattened Device Tree) [ 115.923876] [<c0015368>] (unwind_backtrace) from [<c00119f4>] (show_stack+0x10/0x14) [ 115.932013] [<c00119f4>] (show_stack) from [<c05b78e8>] (dump_stack+0x78/0x94) [ 115.939594] [<c05b78e8>] (dump_stack) from [<c003de28>] (warn_slowpath_common+0x7c/0xb4) [ 115.948094] [<c003de28>] (warn_slowpath_common) from [<c003de7c>] (warn_slowpath_null+0x1c/0x24) [ 115.957315] [<c003de7c>] (warn_slowpath_null) from [<c03461e8>] (gpiod_set_raw_value+0x40/0x4c) [ 115.966457] [<c03461e8>] (gpiod_set_raw_value) from [<c04866f4>] (set_fan_speed+0x4c/0x64) [ 115.975145] [<c04866f4>] (set_fan_speed) from [<c04868a8>] (set_rpm+0x98/0xac) [ 115.982742] [<c04868a8>] (set_rpm) from [<c039fb4c>] (dev_attr_store+0x18/0x24) [ 115.990426] [<c039fb4c>] (dev_attr_store) from [<c01b0a28>] (sysfs_kf_write+0x4c/0x50) [ 115.998742] [<c01b0a28>] (sysfs_kf_write) from [<c01afe1c>] (kernfs_fop_write+0xbc/0x19c) [ 116.007333] [<c01afe1c>] (kernfs_fop_write) from [<c0148cc4>] (vfs_write+0xb0/0x1a0) [ 116.015461] [<c0148cc4>] (vfs_write) from [<c0148fbc>] (SyS_write+0x44/0x84) [ 116.022881] [<c0148fbc>] (SyS_write) from [<c000e5c0>] (ret_fast_syscall+0x0/0x48) [ 116.030833] ---[ end trace 3a0b636123acab82 ]--- So, switch over to sleepable GPIO operations as there is no mandatory need for non-sleepable gpio operations in the fan driver. This allows the fan driver to be used with i2c based gpio expanders such as palmas_gpio. Signed-off-by: NNishanth Menon <nm@ti.com> Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
-
由 Bartosz Golaszewski 提交于
The return value of i2c_smbus_read_byte_data() is checked in tmp401_init_client(), but only a warning is printed and the device is registered anyway. This leads to devices being registered even if they cannot be physically detected. Bail out from probe in case of write errors and notify the user. Signed-off-by: NBartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
-
由 Patrick Titiano 提交于
Signed-off-by: NPatrick Titiano <ptitiano@baylibre.com> [Bartosz Golaszewski: prepared for submission, code review fixes] Signed-off-by: NBartosz Golaszewski <bgolaszewski@baylibre.com> [Guenter Roeck: Merged two patches into one] Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
-
由 Vishnu Motghare 提交于
Cadence I2C controller has bug wherein it generates invalid read transactions after timeout in master receiver mode. This driver does not use the HW timeout and this interrupt is disabled but the feature itself cannot be disabled. Hence, this patch writes the maximum value (0xFF) to this register. This is one of the workarounds to this bug and it will not avoid the issue completely but reduces the chances of error. Signed-off-by: NVishnu Motghare <vishnum@xilinx.com> Signed-off-by: NHarini Katakam <harinik@xilinx.com> Signed-off-by: NWolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
-
由 Grygorii Strashko 提交于
According to I2C specification the NACK should be handled as follows: "When SDA remains HIGH during this ninth clock pulse, this is defined as the Not Acknowledge signal. The master can then generate either a STOP condition to abort the transfer, or a repeated START condition to start a new transfer." [I2C spec Rev. 6, 3.1.6: http://www.nxp.com/documents/user_manual/UM10204.pdf] Currently the Davinci i2c driver interrupts the transfer on receipt of a NACK but fails to send a STOP in some situations and so makes the bus stuck until next I2C IP reset (idle/enable). For example, the issue will happen during SMBus read transfer which consists from two i2c messages write command/address and read data: S Slave Address Wr A Command Code A Sr Slave Address Rd A D1..Dn A P <--- write -----------------------> <--- read ---------------------> The I2C client device will send NACK if it can't recognize "Command Code" and it's expected from I2C master to generate STP in this case. But now, Davinci i2C driver will just exit with -EREMOTEIO and STP will not be generated. Hence, fix it by generating Stop condition (STP) always when NACK is received. This patch fixes Davinci I2C in the same way it was done for OMAP I2C commit cda2109a ("i2c: omap: query STP always when NACK is received"). Reviewed-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Reported-by: NHein Tibosch <hein_tibosch@yahoo.es> Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: NWolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
-
由 Tejun Heo 提交于
Just like 0x1600 which got blacklisted by 66a7cbc3 ("ahci: disable MSI instead of NCQ on Samsung pci-e SSDs on macbooks"), 0xa800 chokes on NCQ commands if MSI is enabled. Disable MSI. Signed-off-by: NTejun Heo <tj@kernel.org> Reported-by: NDominik Mierzejewski <dominik@greysector.net> Link: https://bugzilla.kernel.org/show_bug.cgi?id=89171 Cc: stable@vger.kernel.org
-
- 04 12月, 2014 10 次提交
-
-
由 Andy Lutomirski 提交于
It appears that some SCHEDULE_USER (asm for schedule_user) callers in arch/x86/kernel/entry_64.S are called from RCU kernel context, and schedule_user will return in RCU user context. This causes RCU warnings and possible failures. This is intended to be a minimal fix suitable for 3.18. Reported-and-tested-by: NDave Jones <davej@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: NAndy Lutomirski <luto@amacapital.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux由 Linus Torvalds 提交于
Pull i2c bugfixes from Wolfram Sang: "A few driver bugfixes for 3.18" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: omap: fix i207 errata handling i2c: designware: prevent early stop on TX FIFO empty i2c: omap: fix NACK and Arbitration Lost irq handling
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci由 Linus Torvalds 提交于
Pull PCI fix from Bjorn Helgaas: "This fixes a Tegra20 regression that we introduced during the v3.18 merge window" * tag 'pci-v3.18-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: tegra: Use physical range for I/O mapping
-
git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux由 Linus Torvalds 提交于
Pull devicetree bugfix from Grant Likely: "One more bug fix for v3.18. I debated whether or not to send you this merge request because we're at such a late rc. The bug isn't critical in that there is only one system known to be affected and the patch is easy to backport. The codepath is used by pretty much every DT based system, so there is risk a of regression (it /should/ be safe, but I've been bitten by stuff that should be safe before). I've had it in linux-next for a week and haven't received any complaints. I think it probably should just be merged right away rather than waiting for the merge window and backporting. It does fix a real bug and the code is theoretically safer after the change. I can't think of any situation where it would be dangerous to reserve the DT memory an extra time. Summary from tag: Single bugfix for boot failure seen in the wild. The memory reserve code tries to be clever about reserving the FDT, but it should just go ahead and reserve it unconditionally to avoid the problem of partial overlap described in the patch" * tag 'devicetree-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux: of/fdt: memblock_reserve /memreserve/ regions in the case of partial overlap
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull block core regression fix from Jens Axboe: "Single fix for a regression introduced in this development cycle, where dm on top of dif/dix is broken. From Darrick Wong" * 'for-linus' of git://git.kernel.dk/linux-block: block: fix regression where bio_integrity_process uses wrong bio_vec iterator
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "Radeon and Nouveau fixes: So nouveau had a few regression introduced, Ben and Maarten finally tracked down the one that was causing problems on my MacBookPro, also nvidia gave some info on the an engine we were using incorrectly, so disable our use of it, and one regresion with pci hotplug affecting optimus users. Radeon has an oops fixs, sync fix, and one workaround to avoid broken functionality on 32-bit x86, this needs better root causing and a better fix, but the bandaid is a lot safer at this point" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon: kernel panic in drm_calc_vbltimestamp_from_scanoutpos with 3.18.0-rc6 drm/radeon: Ignore RADEON_GEM_GTT_WC on 32-bit x86 drm/radeon: sync all BOs involved in a CS v2 nouveau: move the hotplug ignore to correct place. drm/nouveau/gf116: remove copy1 engine drm/nouveau: prevent stale fence->channel pointers, and protect with rcu drm/nouveau/fifo/g84-: ack non-stall interrupt before handling it
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Fill in ethtool link parameters for all link types in cxgb4, from Hariprasad Shenai. 2) Fix probe regressions in stmmac driver, from Huacai Chen. 3) Network namespace leaks on errirs in rtnetlink, from Nicolas Dichtel. 4) Remove erroneous BUG check which can actually trigger legitimately, in xen-netfront. From Seth Forshee. 5) Validate length of IFLA_BOND_ARP_IP_TARGET netlink attributes, from Thomas Grag. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: cxgb4: Fill in supported link mode for SFP modules xen-netfront: Remove BUGs on paged skb data which crosses a page boundary sh_eth: Fix sleeping function called from invalid context stmmac: platform: Move plat_dat checking earlier sh_eth: Fix skb alloc size and alignment adjust rule. rtnetlink: release net refcnt on error in do_setlink() bond: Check length of IFLA_BOND_ARP_IP_TARGET attributes
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security由 Linus Torvalds 提交于
Pull keyring/nfs fixes from James Morris: "From David Howells: The first one fixes the handling of maximum buffer size for key descriptions, fixing the size at 4095 + NUL char rather than whatever PAGE_SIZE happens to be and permits you to read back the full description without it getting clipped because some extra information got prepended. The second and third fix a bug in NFS idmapper handling whereby a key representing a mapping between an id and a name expires and causing EKEYEXPIRED to be seen internally in NFS (which prevents the mapping from happening) rather than re-looking up the mapping" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: KEYS: request_key() should reget expired keys rather than give EKEYEXPIRED KEYS: Simplify KEYRING_SEARCH_{NO,DO}_STATE_CHECK flags KEYS: Fix the size of the key description passed to/from userspace
-
由 Linus Torvalds 提交于
Merge misc fixes from Andrew Morton: "10 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: slab: fix nodeid bounds check for non-contiguous node IDs lib/genalloc.c: export devm_gen_pool_create() for modules mm: fix anon_vma_clone() error treatment mm: fix swapoff hang after page migration and fork fat: fix oops on corrupted vfat fs ipc/sem.c: fully initialize sem_array before making it visible drivers/input/evdev.c: don't kfree() a vmalloc address mm/vmpressure.c: fix race in vmpressure_work_fn() mm: frontswap: invalidate expired data on a dup-store failure mm: do not overwrite reserved pages counter at show_mem()
-
由 Paul Mackerras 提交于
The bounds check for nodeid in ____cache_alloc_node gives false positives on machines where the node IDs are not contiguous, leading to a panic at boot time. For example, on a POWER8 machine the node IDs are typically 0, 1, 16 and 17. This means that num_online_nodes() returns 4, so when ____cache_alloc_node is called with nodeid = 16 the VM_BUG_ON triggers, like this: kernel BUG at /home/paulus/kernel/kvm/mm/slab.c:3079! Call Trace: .____cache_alloc_node+0x5c/0x270 (unreliable) .kmem_cache_alloc_node_trace+0xdc/0x360 .init_list+0x3c/0x128 .kmem_cache_init+0x1dc/0x258 .start_kernel+0x2a0/0x568 start_here_common+0x20/0xa8 To fix this, we instead compare the nodeid with MAX_NUMNODES, and additionally make sure it isn't negative (since nodeid is an int). The check is there mainly to protect the array dereference in the get_node() call in the next line, and the array being dereferenced is of size MAX_NUMNODES. If the nodeid is in range but invalid (for example if the node is off-line), the BUG_ON in the next line will catch that. Fixes: 14e50c6a ("mm: slab: Verify the nodeid passed to ____cache_alloc_node") Signed-off-by: NPaul Mackerras <paulus@samba.org> Reviewed-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Reviewed-by: NPekka Enberg <penberg@kernel.org> Acked-by: NDavid Rientjes <rientjes@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-