Do not duplicate common tty_port_hangup code. Use it instead.

Also do not unset ASYNC_NORMAL_ACTIVE and wake up from the
tty_hangup() caller. It makes no sense since we don't check that
flag in sleepers. tty_port_hangup() performed later will do the
right job.
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Don't fetch firmware address and recompute channel control on each
port access. Precompute the values on init and use them later all
the time.

The same for board control.

This simplify code and improves readability.
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Use a tty_port common instead. This saves lots of .text and makes the
code a lot more readable.

This involves separation of a dtr_rts handling, next patches will use
that to not duplicate the code all over the place.
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

While this is not problem for Y card handlers (they are protected
by card_lock), Z handlers and other functions may dereference NULL
at any point after hangup/close. Even if (tty == NULL) was already
performed in the handler.

Note that it's not an issue for Y cards just for now. After
switching to tty_port_close_* et al. this will be a problem. So
add refcounting to them all.

Also proc .show doesn't take a tty reference and it should (along
with a ldisc one).

While at it and changing prototypes (adding tty param), prepend
cy_ to functions which don't have it yet.
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Previously, if any bit other than CMD_SND_BREAK was set, CMD_SND_BREAK
was not unset.
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

fix the following 'make includecheck' warning:

  drivers/char/vt.c: linux/device.h is included more than once.
Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Now that the /proc/tty/ldiscs handling doesn't play games with 'struct
ldisc' any more, the only remaining user of 'tty_ldisc_try_get()' is
'tty_ldisc_get()' (note the lack of 'try').

And we're actually much better off folding the logic directly into that
file, since the 'try' part was always about trying to get the ldisc
operations, not the ldisc itself: and making that explicit inside of
'tty_ldisc_get()' clarifies the whole semantics.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>,
Tested-by: NSergey Senozhatsky <sergey.senozhatsky@mail.by>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The /proc/tty/ldiscs file is totally and utterly un-interested in the
"struct tty_ldisc" structures, and only cares about the underlying ldisc
operations.

So don't make it create a dummy 'struct ldisc' only to get a pointer to
the operations, and then destroy it.  Instead, we split up the function
'tty_ldisc_try_get()', and create a 'get_ldops()' helper that just looks
up the ldisc operations based on the ldisc number.

That makes the code simpler to read (smaller and more well-defined
helper functions), and allows the /proc functions to avoid creating that
useless dummy only to immediately free it again.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Tested-by: NSergey Senozhatsky <sergey.senozhatsky@mail.by>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add ID as reported in:

http://lists.infradead.org/pipermail/linux-pcmcia/2009-May/006127.htmlReported-by: NKenneth Moorman <KMoorman@transy.edu>
Signed-off-by: NWolfram Sang <w.sang@pengutronix.de>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Since early printk only makes sense/works when the serial driver is built
into the kernel, disable the option for this driver when it is going to be
built as a module.  Otherwise we get build failures due to the ifdef
handling.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: stable <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The tty_operation chars_in_buffer() is not allowed to return a negative
value to signal an error.  Corrects the problem flagged by commit
23198fda, "tty: fix chars_in_buffers".
Signed-off-by: NTilman Schmidt <tilman@imap.cc>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: stable <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Merge branch 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (38 commits)
  x86: Move get/set_wallclock to x86_platform_ops
  x86: platform: Fix section annotations
  x86: apic namespace cleanup
  x86: Distangle ioapic and i8259
  x86: Add Moorestown early detection
  x86: Add hardware_subarch ID for Moorestown
  x86: Add early platform detection
  x86: Move tsc_init to late_time_init
  x86: Move tsc_calibration to x86_init_ops
  x86: Replace the now identical time_32/64.c by time.c
  x86: time_32/64.c unify profile_pc
  x86: Move calibrate_cpu to tsc.c
  x86: Make timer setup and global variables the same in time_32/64.c
  x86: Remove mca bus ifdef from timer interrupt
  x86: Simplify timer_ack magic in time_32.c
  x86: Prepare unification of time_32/64.c
  x86: Remove do_timer hook
  x86: Add timer_init to x86_init_ops
  x86: Move percpu clockevents setup to x86_init_ops
  x86: Move xen_post_allocator_init into xen_pagetable_setup_done
  ...

Fix up conflicts in arch/x86/include/asm/io_apic.h

Signed-off-by: NGeoffrey Thomas <geofft@ksplice.com>
Signed-off-by: NTim Abbott <tabbott@ksplice.com>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is largely a straightforward conversion. The patch results in
fewer output sections, and some data being reordered, but should have
no functional impact.

Also, note that this patch moves some data (namely, init_task and
cacheline-aligned) inside [_sdata,_edata].

Because frv already builds using -ffunction-sections -fdata-sections,
we can't use BSS_SECTION or RW_DATA_SECTION yet, since they do not
currently include the required .bss.* and .data.* sections.
Signed-off-by: NNelson Elhage <nelhage@ksplice.com>
Acked-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NTim Abbott <tabbott@ksplice.com>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It appears that frv copied the .altinstructions definitions in its linker
script from x86. Since frv doesn't put anything in those sections, this
is just dead code.
Signed-off-by: NNelson Elhage <nelhage@ksplice.com>
Acked-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NTim Abbott <tabbott@ksplice.com>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (64 commits)
  ext4: Update documentation about quota mount options
  ext4: replace MAX_DEFRAG_SIZE with EXT_MAX_BLOCK
  ext4: Fix the alloc on close after a truncate hueristic
  ext4: Add a tracepoint for ext4_alloc_da_blocks()
  ext4: store EXT4_EXT_MIGRATE in i_state instead of i_flags
  ext4: limit block allocations for indirect-block files to < 2^32
  ext4: Fix different block exchange issue in EXT4_IOC_MOVE_EXT
  ext4: Add null extent check to ext_get_path
  ext4: Replace BUG_ON() with ext4_error() in move_extents.c
  ext4: Replace get_ext_path macro with an inline funciton
  ext4: Fix include/trace/events/ext4.h to work with Systemtap
  ext4: Fix initalization of s_flex_groups
  ext4: Always set dx_node's fake_dirent explicitly.
  ext4: Fix async commit mode to be safe by using a barrier
  ext4: Don't update superblock write time when filesystem is read-only
  ext4: Clarify the locking details in mballoc
  ext4: check for need init flag in ext4_mb_load_buddy
  ext4: move ext4_mb_init_group() function earlier in the mballoc.c
  ext4: Make non-journal fsync work properly
  ext4: Assure that metadata blocks are written during fsync in no journal mode
  ...

Remove net/genetlink.h inclusion, now sched.c won't be recompiled
because of some networking changes.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Allow the short description after symbol name and dash in a kernel-doc
comment to span multiple lines, e.g. like this:

	/**
	 * unmap_mapping_range - unmap the portion of all mmaps in the
	 *	specified address_space corresponding to the specified
	 *	page range in the underlying file.
	 * @mapping: the address space containing mmaps to be unmapped.
	 * ...
	 */

The short description ends with a parameter description, an empty line
or the end of the comment block.
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

'current' is a pointer, so the right form is  'down_write(&current->mm->mmap_sem)'.
Signed-off-by: NJianjun Kong <jianjun@zeuux.org>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The kref_put() already occurs after the out label
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  [WATCHDOG] sizeof cleanup
  [WATCHDOG] wdt_pci: fix printk and variable type
  [WATCHDOG] wdt_pci - use pci_request_region
  [WATCHDOG] ar7_wdt: Fix error handling during probe.
  [WATCHDOG] ar7_wdt: convert to become a platform driver
  [WATCHDOG] fix book E watchdog to take WDIOC_SETTIMEOUT arg in seconds
  [WATCHDOG] davinci: use clock framework for timer frequency
  [WATCHDOG] Use DIV_ROUND_UP() macro in the coh901327 WDT
  [WATCHDOG] Add support for WM831x watchdog
  [WATCHDOG] Add watchdog driver for NUC900
  [WATCHDOG] add SBC-FITPC2 watchdog driver

* 'for-linus' of git://gitserver.sunplusct.com/linux-2.6-score: (22 commits)
  score: add TIF_NOTIFY_RESUME define in asm/thread_info.h
  score: make init_thread_union align to THREAD_SIZE
  score: update files according to review comments.
  score: add old syscall support
  score: add MEMORY_START and MEMORY_SIZE define, to make the code clear
  score: update inconsistent declare after .c was changed
  score: remove unused code, add include files in .c
  score: clean up mm/init.c
  score: make irq.h definitions local
  score: cleanups: dead code, 0 as pointer, shadowed variables
  score: fix function prototypes
  score: add address space annotations
  score: add missing #includes
  score: move save arg5 and arg6 instruction in front of enable_irq
  score: add prototypes for wrapped syscalls
  score: remove init_mm
  score: add generic sys_call_table
  score: remove __{put,get}_user_unknown
  score: unset __ARCH_WANT_IPC_PARSE_VERSION
  score: update files according to review comments
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (262 commits)
  sh: mach-ecovec24: Add user debug switch support
  sh: Kill off unused se_skipped in alignment trap notification code.
  sh: Wire up HAVE_SYSCALL_TRACEPOINTS.
  video: sh_mobile_lcdcfb: use both register sets for display panning
  video: sh_mobile_lcdcfb: implement display panning
  sh: Fix up sh7705 flush_dcache_page() build.
  sh: kfr2r09: document the PLL/FLL <-> RF relationship.
  sh: mach-ecovec24: need asm/clock.h.
  sh: mach-ecovec24: deassert usb irq on boot.
  sh: Add KEYSC support for EcoVec24
  sh: add kycr2_delay for sh_keysc
  sh: cpufreq: Include CPU id in info messages.
  sh: multi-evt support for SH-X3 proto CPU.
  sh: clkfwk: remove bogus set_bus_parent() from SH7709.
  sh: Fix the indication point of the liquid crystal of AP-325RXA(AP3300)
  sh: Add EcoVec24 romImage defconfig
  sh: USB disable process is needed if romImage boot for EcoVec24
  sh: EcoVec24: add HIZA setting for LED
  sh: EcoVec24: write MAC address in boot
  sh: Add romImage support for EcoVec24
  ...

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] Clean up linker script using standard macros.
  [IA64] Use standard macros for page-aligned data.
  [IA64] Use .ref.text, not .text.init for start_ap.
  [IA64] sgi-xp: fix printk format warnings
  [IA64] ioc4_serial: fix printk format warnings
  [IA64] mbcs: fix printk format warnings
  [IA64] pci_br, fix infinite loop in find_free_ate()
  [IA64] kdump: Short path to freeze CPUs
  [IA64] kdump: Try INIT regardless of
  [IA64] kdump: Mask INIT first in panic-kdump path
  [IA64] kdump: Don't return APs to SAL from kdump
  [IA64] kexec: Unregister MCA handler before kexec
  [IA64] kexec: Make INIT safe while transition to
  [IA64] kdump: Mask MCA/INIT on frozen cpus

Fix up conflict in arch/ia64/kernel/vmlinux.lds.S as per Tony's
suggestion.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: add fusectl interface to max_background
  fuse: limit user-specified values of max background requests
  fuse: use drop_nlink() instead of direct nlink manipulation
  fuse: document protocol version negotiation
  fuse: make the number of max background requests and congestion threshold tunable

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (55 commits)
  regulator: Voltage count for AB3100
  mfd: Convert WM8350 to use request_threaded_irq()
  mfd: Update MAINTAINERS patterns for WM831x
  mfd: Fix twl4030-power warnings
  regulator: AB3100 support
  rtc: AB3100 RTC support
  mfd: Fix ab3100-otp build failure
  mfd: OMAP: Board-specifc twl4030 DPS scripts for RX51 board
  mfd: Print warning for twl4030 out-of-order script loading
  mfd: Add support for TWL4030/5030 dynamic power switching
  mfd: AB3100 OTP readout
  regulator: Add Freescale MC13783 driver
  mfd: Add Freescale MC13783 driver
  mfd: AB3100 disable irq nosync
  mfd: AB3100 alter default setting
  mfd: AB3100 propagate error
  mfd: AB3100 accessor function cleanups
  rtc: Add support for RTCs on Wolfson WM831x devices
  regulator: get pcap data from the parent device
  input: PCAP2 misc input driver
  ...

Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Merge branch 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci

* 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci: (62 commits)
  DaVinci: DM646x - platform changes for vpif capture and display drivers
  davinci: DM355 - platform changes for vpfe capture
  davinci: DM644x platform changes for vpfe capture
  davinci: audio: move tlv320aic33 i2c setup into board files
  DaVinci: EDMA: Adding 2 new APIs for allocating/freeing PARAMs
  DaVinci: DM365: Adding entries for DM365 IRQ's
  DaVinci: DM355: Adding PINMUX entries for DM355 Display
  davinci: Handle pinmux conflict between mmc/sd and nor flash
  davinci: Add NOR flash support for da850/omap-l138
  davinci: Add NAND flash support for DA850/OMAP-L138
  davinci: Add MMC/SD support for da850/omap-l138
  davinci: Add platform support for da850/omap-l138 GLCD
  davinci: Macro to convert GPIO signal to GPIO pin number
  davinci: Audio support for DA850/OMAP-L138 EVM
  davinci: Audio support for DA830 EVM
  davinci: Correct the number of GPIO pins for da850/omap-l138
  davinci: Configure MDIO pins for EMAC
  DaVinci: DM365: Add Support for new Revision of silicon
  DaVinci: DM365: Fix Compilation issue due to PINMUX entry
  DaVinci: EDMA: Updating default queue handling
  ...

Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (47 commits)
  OMAP clock: use debugfs_remove_recursive() for rewinding
  OMAP2/3/4 core: create omap_device layer
  OMAP: omap_hwmod: call omap_hwmod init at boot; create interconnects
  OMAP2/3/4: create omap_hwmod layer
  OMAP2/3 board-*.c files: read bootloader configuration earlier
  OMAP2/3/4 PRCM: add module IDLEST wait code
  OMAP2/3 PM: create the OMAP PM interface and add a default OMAP PM no-op layer
  OMAP3 clock: remove superfluous calls to omap2_init_clk_clkdm
  OMAP clock: associate MPU clocks with the mpu_clkdm
  OMAP3 clock: Fixed processing of bootarg 'mpurate'
  OMAP: SDRC: Add several new register definitions
  OMAP: powerdomain: Fix overflow when doing powerdomain deps lookups.
  OMAP: PM: Added suspend target state control to debugfs for OMAP3
  OMAP: PM debug: Add PRCM register dump support
  OMAP: PM debug: make powerdomains use PM-debug counters
  OMAP: PM: Add pm-debug counters
  OMAP: PM: Add closures to clkdm_for_each and pwrdm_for_each.
  OMAP: PM: Hook into PM counters
  OMAP: PM counter infrastructure.
  OMAP3: PM: fix lockdep warning caused by omap3_pm_init
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm:
  dlm: use kernel_sendpage
  dlm: fix connection close handling
  dlm: fix double-release of socket in error exit path

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6:
  ext3: Flush disk caches on fsync when needed
  ext3: Add locking to ext3_do_update_inode
  ext3: Fix possible deadlock between ext3_truncate() and ext3_get_blocks()
  jbd: Annotate transaction start also for journal_restart()
  jbd: Journal block numbers can ever be only 32-bit use unsigned int for them
  ext3: Update MAINTAINERS for ext3 and JBD
  JBD: round commit timer up to avoid uncommitted transaction

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] Fix NULL ptr regression in powernow-k8
  [CPUFREQ] Create a blacklist for processors that should not load the acpi-cpufreq module.
  [CPUFREQ] Powernow-k8: Enable more than 2 low P-states
  [CPUFREQ] remove rwsem lock from CPUFREQ_GOV_STOP call (second call site)
  [CPUFREQ] ondemand - Use global sysfs dir for tuning settings
  [CPUFREQ] Introduce global, not per core: /sys/devices/system/cpu/cpufreq
  [CPUFREQ] Bail out of cpufreq_add_dev if the link for a managed CPU got created
  [CPUFREQ] Factor out policy setting from cpufreq_add_dev
  [CPUFREQ] Factor out interface creation from cpufreq_add_dev
  [CPUFREQ] Factor out symlink creation from cpufreq_add_dev
  [CPUFREQ] cleanup up -ENOMEM handling in cpufreq_add_dev
  [CPUFREQ] Reduce scope of cpu_sys_dev in cpufreq_add_dev
  [CPUFREQ] update Doc for cpuinfo_cur_freq and scaling_cur_freq

* 'timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (34 commits)
  time: Prevent 32 bit overflow with set_normalized_timespec()
  clocksource: Delay clocksource down rating to late boot
  clocksource: clocksource_select must be called with mutex locked
  clocksource: Resolve cpu hotplug dead lock with TSC unstable, fix crash
  timers: Drop a function prototype
  clocksource: Resolve cpu hotplug dead lock with TSC unstable
  timer.c: Fix S/390 comments
  timekeeping: Fix invalid getboottime() value
  timekeeping: Fix up read_persistent_clock() breakage on sh
  timekeeping: Increase granularity of read_persistent_clock(), build fix
  time: Introduce CLOCK_REALTIME_COARSE
  x86: Do not unregister PIT clocksource on PIT oneshot setup/shutdown
  clocksource: Avoid clocksource watchdog circular locking dependency
  clocksource: Protect the watchdog rating changes with clocksource_mutex
  clocksource: Call clocksource_change_rating() outside of watchdog_lock
  timekeeping: Introduce read_boot_clock
  timekeeping: Increase granularity of read_persistent_clock()
  timekeeping: Update clocksource with stop_machine
  timekeeping: Add timekeeper read_clock helper functions
  timekeeping: Move NTP adjusted clock multiplier to struct timekeeper
  ...

Fix trivial conflict due to MIPS lemote -> loongson renaming.

Commit ac89a917 ("pty: don't limit the writes to 'pty_space()' inside
'pty_write()'") removed the pty_space() checking, in order to let the
regular tty buffer code limit the buffering itself.

That was all good, but as a subtle side effect it meant that we'd be
doing a tty_wakeup() even in the case where the buffers were all filled
up, and didn't actually make any progress on the write.

Which sounds innocuous, but it interacts very badly with the ppp_async
code, which has an infinite loop in ppp_async_push() that tries to push
out data to the tty.  When we call tty_wakeup(), that loop ends up
thinking that progress was made (see the subtle interactions between
XMIT_WAKEUP and 'tty_stuffed' for details).  End result: one unhappy ppp
user.

Fixed by noticing when tty_insert_flip_string() didn't actually do
anything, and then not doing any more processing (including, very much
not calling tty_wakeup()).
Bisected-and-tested-by: NPeter Volkov <pva@gentoo.org>
Cc: stable@kernel.org (2.6.31)
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use sizeof(*) instead of sizeof * (See Codingstyle documentation).
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Fix printk format warning:
drivers/watchdog/wdt_pci.c:652: warning: format '%04x' expects type 'unsigned int', but argument 2 has type 'resource_size_t'

and then use resource_size_t for the "io" variable as well
so that it won't be truncated.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Use pci_request_region instead of request_region for this pci_driver.
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Fix error handling in the probe function.
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
Tested-by: NFlorian Fainelli <florian@openwrt.org>

This patch converts the ar7_wdt driver to become
a platform driver. The AR7 SoC specific identification
and base register calculation is performed by the board
code, therefore we no longer need to have access to
ar7_chip_id. We also remove the reboot notifier code to
use the platform shutdown method as Wim suggested.
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

The WDIOC_SETTIMEOUT argument is supposed to be a "seconds" value.
However, the book E wdt currently treats it as a "period" which is
interpreted in a board-specific way.

This patch allows the user to pass in a "seconds" value and the driver
will set the smallest timeout that is at least as large as specified
by the user.  It's been tested on e500 hardware and works as
expected.

The patch only modifies the CONFIG_FSL_BOOKE case, the CONFIG_4xx case
is left unmodified as I don't have any hardware to test it on.
Signed-off-by: NChris Friesen <cfriesen@nortel.com>
Cc: Kumar Gala <galak@gate.crashing.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>