When running the 083th case of xfstests on the filesystem with
"compress-force=lzo", the following WARNINGs were triggered.
  WARNING: at fs/btrfs/inode.c:7908
  WARNING: at fs/btrfs/inode.c:7909
  WARNING: at fs/btrfs/inode.c:7911
  WARNING: at fs/btrfs/extent-tree.c:4510
  WARNING: at fs/btrfs/extent-tree.c:4511

This problem was introduced by the patch "Btrfs: fix deadlock due
to unsubmitted". In this patch, there are two bugs which caused
the above problem.

The 1st one is a off-by-one bug, if the DIO write return 0, it is
also a short write, we need release the reserved space for it. But
we didn't do it in that patch. Fix it by change "ret > 0" to
"ret >= 0".

The 2nd one is ->outstanding_extents was increased twice when
a short write happened. As we know, ->outstanding_extents is
a counter to keep track of the number of extent items we may
use duo to delalloc, when we reserve the free space for a
delalloc write, we assume that the write will introduce just
one extent item, so we increase ->outstanding_extents by 1 at
that time. And then we will increase it every time we split the
write, it is done at the beginning of btrfs_get_blocks_direct().
So when a short write happens, we needn't increase
->outstanding_extents again. But this patch done.

In order to fix the 2nd problem, I re-write the logic for
->outstanding_extents operation. We don't increase it at the
beginning of btrfs_get_blocks_direct(), instead, we just
increase it when the split actually happens.
Reported-by: NMitch Harder <mitch.harder@sabayonlinux.org>
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

This comes from one of btrfs's project ideas,
As we defragment files, we break any sharing from other snapshots.
The balancing code will preserve the sharing, and defrag needs to grow this
as well.

Now we're able to fill the blank with this patch, in which we make full use of
backref walking stuff.

Here is the basic idea,
o  set the writeback ranges started by defragment with flag EXTENT_DEFRAG
o  at endio, after we finish updating fs tree, we use backref walking to find
   all parents of the ranges and re-link them with the new COWed file layout by
   adding corresponding backrefs.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

We try to limit the size of a chunk to 10GB, which keeps the unit of
work reasonable during balance and resize operations.  The limit checks
were taking into account the number of copies of the data we had but
what they really should be doing is comparing against the logical
size of the chunk we're creating.

This moves the code around a little to use the count of data stripes
from raid5/6.
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Very large fallocate requests are cpu bound and result in extents with a
repeating pattern of ever decreasing size:

$ time fallocate -l 1T file
real	0m13.039s

( an excerpt of the extents from btrfs-debug-tree: )
  prealloc data disk byte 1536292564992 nr 397312
  prealloc data disk byte 1536292962304 nr 196608
  prealloc data disk byte 1536293158912 nr 98304
  prealloc data disk byte 1536293257216 nr 49152
  prealloc data disk byte 1536293306368 nr 24576
  prealloc data disk byte 1536293330944 nr 12288
  prealloc data disk byte 1536293343232 nr 8192
  prealloc data disk byte 1536293351424 nr 4096
  prealloc data disk byte 1536293355520 nr 4096
  prealloc data disk byte 1536293359616 nr 4096

The excessive cpu use comes from __btrfs_prealloc_file_range() trying to
allocate the entire remaining size after each extent is allocated.
btrfs_reserve_extent() repeatedly cuts this requested size in half until
it gets down to the size that the allocators can return.  We limit the
problem for now by capping each reservation at 256 meg.

The small extents come from a masking bug when decreasing the requested
reservation size.  The high 32bits are cleared and the remaining low
bits might happen to reserve a small size.   Fix this by using
round_down() which properly casts the mask.

After these fixes huge fallocate requests are fast and result in nice
large extents:

$ time fallocate -l 1T file
real	0m0.082s

  prealloc data disk byte 1112425889792 nr 268435456
  prealloc data disk byte 1112694325248 nr 268435456
  prealloc data disk byte 1112962760704 nr 268435456
Reported-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: NZach Brown <zab@redhat.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

__btrfs_close_devices() clones btrfs device structs with
memcpy(). Some of the fields in the clone are reinitialized, but it's
missing to init io_lock. In mainline this goes unnoticed, but on RT it
leaves the plist pointing to the original about to be freed lock
struct.

Initialize io_lock after cloning, so no references to the original
struct are left.
Reported-and-tested-by: NMike Galbraith <efault@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Conflicts:
	fs/btrfs/ctree.h
	fs/btrfs/extent-tree.c
	fs/btrfs/inode.c
	fs/btrfs/volumes.c

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/josef/btrfs-next into for-linus-3.9
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Conflicts:
	fs/btrfs/disk-io.c

We forget to free qgroup reservation in commit_transaction(),fix it.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NWang Shilong <wangsl-fnst@cn.fujitsu.com>
Cc: Arne Jansen <sensille@gmx.net>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

The original code forget to check whether quota has been disabled firstly,
and it will return 'EINVAL' and return error to users if quota has been
disabled,it will be unfriendly and confusing for users to see that.
So just return directly if quota has been disabled.
Signed-off-by: NWang Shilong <wangsl-fnst@cn.fujitsu.com>
Cc: Arne Jansen <sensille@gmx.net>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Right now inode cache inode is treated as the same as space cache
inode, ie. keep inode in memory till putting super.

But this leads to an awkward situation.

If we're going to delete a snapshot/subvolume, btrfs will not
actually delete it and return free space, but will add it to dead
roots list until the last inode on this snap/subvol being destroyed.
Then we'll fetch deleted roots and cleanup them via cleaner thread.

So here is the problem, if we enable inode cache option, each
snap/subvol has a cached inode which is used to store inode allcation
information.  And this cache inode will be kept in memory, as the above
said.  So with inode cache, snap/subvol can only be added into
dead roots list during freeing roots stage in umount, so that we can
ONLY get space back after another remount(we cleanup dead roots on mount).

But the real thing is we'll no more use the snap/subvol if we mark it
deleted, so we can safely iput its cache inode when we delete snap/subvol.

Another thing is that we need to change the rules of droping inode, we
don't keep snap/subvol's cache inode in memory till end so that we can
add snap/subvol into dead roots list in time.
Reported-by: NMitch Harder <mitch.harder@sabayonlinux.org>
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

In some cases, we need commit the current transaction, but don't want
to start a new one if there is no running transaction, so we introduce
the function - btrfs_attach_transaction(), which can catch the current
transaction, and return -ENOENT if there is no running transaction.

But no running transaction doesn't mean the current transction completely,
because we removed the running transaction before it completes. In some
cases, it doesn't matter. But in some special cases, such as freeze fs, we
hope the transaction is fully on disk, it will introduce some bugs, for
example, we may feeze the fs and dump the data in the disk, if the transction
doesn't complete, we would dump inconsistent data. So we need fix the above
problem for those cases.

We fixes this problem by introducing a function:
	btrfs_attach_transaction_barrier()
if we hope all the transaction is fully on the disk, even they are not
running, we can use this function.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Now btrfs_commit_transaction() does this

ret = btrfs_run_ordered_operations(root, 0)

which async flushes all inodes on the ordered operations list, it introduced
a deadlock that transaction-start task, transaction-commit task and the flush
workers waited for each other.
(See the following URL to get the detail
 http://marc.info/?l=linux-btrfs&m=136070705732646&w=2)

As we know, if ->in_commit is set, it means someone is committing the
current transaction, we should not try to join it if we are not JOIN
or JOIN_NOLOCK, wait is the best choice for it. In this way, we can avoid
the above problem. In this way, there is another benefit: there is no new
transaction handle to block the transaction which is on the way of commit,
once we set ->in_commit.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

In start_transactio(), we will try to join the transaction again after
the current transaction is committed, so we should not release the
reserved space of the qgroup. Fix it.

Cc: Arne Jansen <sensille@gmx.net>
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

super.magic is an le64 but it's treated as an unterminated string when
compared against BTRFS_MAGIC which is defined as a string.  Instead
define BTRFS_MAGIC as a normal hex value and use endian helpers to
compare it to the super's magic.

I tested this by mounting an fs made before the change and made sure
that it didn't introduce sparse errors.  This matches a similar cleanup
that is pending in btrfs-progs.  David Sterba pointed out that we should
fix the kernel side as well :).
Signed-off-by: NZach Brown <zab@redhat.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

With this new ioctl(2) BTRFS_IOC_SET_FSLABEL, we can set/change the label of a mounted file system.
Signed-off-by: NJie Liu <jeff.liu@oracle.com>
Signed-off-by: NAnand Jain <anand.jain@oracle.com>
Reviewed-by: NMiao Xie <miaox@cn.fujitsu.com>
Reviewed-by: NGoffredo Baroncelli <kreijack@inwind.it>
Reviewed-by: NDavid Sterba <dsterba@suse.cz>
Reviewed-by: NGoffredo Baroncelli <kreijack@inwind.it>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Add a new ioctl(2) BTRFS_IOC_GET_FSLABLE, so that we can get the label upon a mounted filesystem.
Signed-off-by: NJie Liu <jeff.liu@oracle.com>
Signed-off-by: NAnand Jain <anand.jain@oracle.com>
Cc: Miao Xie <miaox@cn.fujitsu.com>
Cc: Goffredo Baroncelli <kreijack@inwind.it>
Cc: David Sterba <dsterba@suse.cz>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Miao made the ordered operations stuff run async, which introduced a
deadlock where we could get somebody (sync) racing in and committing the
transaction while a commit was already happening.  The new committer would
try and flush ordered operations which would hang waiting for the commit to
finish because it is done asynchronously and no longer inherits the callers
trans handle.  To fix this we need to make the ordered operations list a per
transaction list.  We can get new inodes added to the ordered operation list
by truncating them and then having another process writing to them, so this
makes it so that anybody trying to add an ordered operation _must_ start a
transaction in order to add itself to the list, which will keep new inodes
from getting added to the ordered operations list after we start committing.
This should fix the deadlock and also keeps us from doing a lot more work
than we need to during commit.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Dave pointed out that xfstests 273 will tell you that it failed to load the
space cache for a block group when it remounts.  This is because we run out
of space writing out the block group cache.  This is ok and is working as it
should, but let's try to be a bit nicer.  This happens because the block
group was 100mb, but bitmap entries cover 128mb, so we were only getting
extent entries for this block group, which ended up being too many to fit in
the free space cache.  So relax the bitmap size requirements to block groups
that are at least half the size a bitmap will cover or larger, that way we
can still keep the amount of space used in the free space cache low enough
to be able to write it out.  With this patch I no longer fail to write out
the free space cache.  Thanks,
Reported-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Enhance balance usage filter by making it possible to balance out only
completely empty chunks.  Today, usage filter properly acts on values
from 1 to 99 inclusive, usage=100 selects all chunks, and usage=0
selects no chunks.  This commit changes the usage=0 case: the new
meaning is to restripe only completely empty chunks and nothing else.
Suggested-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Commit 5af3e8cc introduced a use-after-free at volumes.c:3139: bctl is freed
above in __cancel_balance() in all cases except for balance pause.  Fix this
by moving the offending check a couple statements above, the meaning of the
check is preserved.
Reported-by: NChris Mason <chris.mason@fusionio.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Nobody uses these io tree ops anymore so just remove them and clean up the code
a bit.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

The defrag operation can take very long, we want to have a way how to
cancel it. The code checks for a pending signal at safe points in the
defrag loops and returns EAGAIN. This means a user can press ^C after
running 'btrfs fi defrag', woks for both defrag modes, files and root.

Returning from the command was instant in my light tests, but may take
longer depending on the aging factor of the filesystem.
Signed-off-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

The warning in use_block_rsv is not useful for users and may fill
the logs unnecessarily.
Signed-off-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

This idea is from ext4. By this patch, we can make the dio write parallel,
and improve the performance. But because we can not update isize without
i_mutex, the unlocked dio write just can be done in front of the EOF.

We needn't worry about the race between dio write and truncate, because the
truncate need wait untill all the dio write end.

And we also needn't worry about the race between dio write and punch hole,
because we have extent lock to protect our operation.

I ran fio to test the performance of this feature.

== Hardware ==
CPU: Intel(R) Core(TM)2 Duo CPU     E7500  @ 2.93GHz
Mem: 2GB
SSD: Intel X25-M 120GB (Test Partition: 60GB)

== config file ==
[global]
ioengine=psync
direct=1
bs=4k
size=32G
runtime=60
directory=/mnt/btrfs/
filename=testfile
group_reporting
thread

[file1]
numjobs=1 # 2 4
rw=randwrite

== result (KBps) ==
write	1	2	4
lock	24936	24738	24726
nolock	24962	30866	32101

== result (iops) ==
write	1	2	4
lock	6234	6184	6181
nolock	6240	7716	8025
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Currently, we can do unlocked dio reads, but the following race
is possible:

dio_read_task			truncate_task
				->btrfs_setattr()
->btrfs_direct_IO
    ->__blockdev_direct_IO
      ->btrfs_get_block
				  ->btrfs_truncate()
				 #alloc truncated blocks
				 #to other inode
      ->submit_io()
     #INFORMATION LEAK

In order to avoid this problem, we must serialize unlocked dio reads with
truncate. There are two approaches:
- use extent lock to protect the extent that we truncate
- use inode_dio_wait() to make sure the truncating task will wait for
  the read DIO.

If we use the 1st one, we will meet the endless truncation problem due to
the nonlocked read DIO after we implement the nonlocked write DIO. It is
because we still need invoke inode_dio_wait() avoid the race between write
DIO and truncation. By that time, we have to introduce

  btrfs_inode_{block, resume}_nolock_dio()

again. That is we have to implement this patch again, so I choose the 2nd
way to fix the problem.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

The deadlock problem happened when running fsstress(a test program in LTP).

Steps to reproduce:
 # mkfs.btrfs -b 100M <partition>
 # mount <partition> <mnt>
 # <Path>/fsstress -p 3 -n 10000000 -d <mnt>

The reason is:
btrfs_direct_IO()
 |->do_direct_IO()
     |->get_page()
     |->get_blocks()
     |	 |->btrfs_delalloc_resereve_space()
     |	 |->btrfs_add_ordered_extent() -------	Add a new ordered extent
     |->dio_send_cur_page(page0) --------------	We didn't submit bio here
     |->get_page()
     |->get_blocks()
	 |->btrfs_delalloc_resereve_space()
	     |->flush_space()
		 |->btrfs_start_ordered_extent()
		     |->wait_event() ----------	Wait the completion of
						the ordered extent that is
						mentioned above

But because we didn't submit the bio that is mentioned above, the ordered
extent can not complete, we would wait for its completion forever.

There are two methods which can fix this deadlock problem:
1. submit the bio before we invoke get_blocks()
2. reserve the space before we do dio

Though the 1st is the simplest way, we need modify the code of VFS, and it
is likely to break contiguous requests, and introduce performance regression
for the other filesystems.

So we have to choose the 2nd way.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Cc: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

I noticed we were getting lots of warnings with xfstest 83 because we have
reservations outstanding.  This is because we moved the orphan add outside
of the truncate, but we don't actually cleanup our reservation if something
fails.  This fixes the problem and I no longer see warnings.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Sometimes xfstest 83 will fail to remount the scratch device because we've
gotten ourselves so full that we cannot cleanup the orphan items.  In this
case check to see if we're doing the orphan cleanup and if we are allow us
to steal our reservation from the global block rsv.  With this patch I've
not been able to reproduce the failed mount problem.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

The argument "inherit" of btrfs_ioctl_snap_create_transid() was assigned
to NULL during we created the snapshots, so we didn't free it though we
called kfree() in the caller.

But since we are sure the snapshot creation is done after the function -
btrfs_ioctl_snap_create_transid() - completes, it is safe that we don't
assign the pointer "inherit" to NULL, and just free it in the caller of
btrfs_ioctl_snap_create_transid(). In this way, the code can become more
readable.
Reported-by: NAlex Lyakas <alex.btrfs@zadarastorage.com>
Cc: Arne Jansen <sensille@gmx.net>
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

open_ctree() need read the metadata to initialize the global information
of btrfs. But it may fail after it submit some bio, and then it will jump
to the error path. Unfortunately, it doesn't check if there are some bios
in flight, and just stop all the worker threads. As a result, when the
submitted bios end, they can not find any worker thread which can deal with
subsequent work, then oops happen.

kernel BUG at fs/btrfs/async-thread.c:605!

Fix this problem by invoking invalidate_inode_pages2() before we stop the
worker threads. This function will wait until the bio end because it need
lock the pages which are going to be invalidated, and if a page is under
disk read IO, it must be locked. invalidate_inode_pages2() need wait until
end bio handler to unlocked it.
Reported-and-Tested-by: NTsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

This patch adds the flag, BTRFS_SEND_FLAG_NO_FILE_DATA to the btrfs send
ioctl code. When this flag is set, the btrfs send code will never write file
data into the stream (thus also avoiding expensive reads of that data in the
first place). BTRFS_SEND_C_UPDATE_EXTENT commands will be sent (instead of
BTRFS_SEND_C_WRITE) with an offset, length pair indicating the extent in
question.

This patch does not affect the operation of BTRFS_SEND_C_CLONE commands -
they will continue to be sent when a search finds an appropriate extent to
clone from.
Signed-off-by: NMark Fasheh <mfasheh@suse.de>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

For write, we also reserve some space for COW blocks during updating
the checksum tree, and we calculate the number of blocks by checking
if the number of bytes outstanding that are going to need csums needs
one more block for csum.

When we add these checksum into the checksum tree, we use ordered sums
list.
Every ordered sum contains csums for each sector, and we'll first try
to look up an existing csum item,
a) if we don't yet have a proper csum item, then we need to insert one,
b) or if we find one but the csum item is not big enough, then we need
to extend it.

The point is we'll unlock the whole path and then insert or extend.
So others can hack in and update the tree.

Each insert or extend needs update the tree with COW on, and we may need
to insert/extend for many times.

That means what we've reserved for updating checksum tree is NOT enough
indeed.

The case is even more serious with having several write threads at the
same time, it can end up eating our reserved space quickly and starting
eating globle reserve pool instead.

I don't yet come up with a way to calculate the worse case for updating
csum, but extending the checksum item as much as possible can be helpful
in my test.

The idea behind is that it can reduce the times we insert/extend so that
it saves us precious reserved space.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

The entry point at the defrag ioctl always sets "cache only" to 0;
the codepaths haven't run for a long time as far as I can
tell.  Chris says they're dead code, so remove them.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

I hit a deadlock where transaction commit was waiting on num_writers to be
0.  This happened because somebody came into btrfs_commit_transaction and
noticed we had aborted and it went to cleanup_transaction.  This shouldn't
happen because cleanup_transaction is really to fixup a bad commit, it
doesn't do the normal trans handle cleanup things.  So if we have an error
just do the normal btrfs_end_transaction dance and return.  Once we are in
the actual commit path we can use cleanup_transaction and be good to go.
Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

I noticed we would deadlock if we aborted a transaction while doing
compressed io.  This is because we don't unlock our pages if something goes
horribly wrong.  To fix this we need to make sure that we call
extent_clear_unlock_delalloc in order to unlock all the pages.  If we have
to cow in the async submission thread we need to make sure to unlock our
locked_page as the cow error path will not unlock the locked page as it
depends on the caller to unlock that page.  With this patch we no longer
deadlock on the page lock when we have an aborted transaction.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

People have been complaining about random ENOSPC errors that will clear up
after a umount or just a given amount of time.  Chris was able to reproduce
this with stress.sh and lots of processes and so was I.  Basically the
overcommit stuff would really let us get out of hand, in my tests I saw up
to 30 gigs of outstanding reservations with only 2 gigs total of metadata
space.  This usually worked out fine but with so much outstanding
reservation the flushing stuff short circuits to make sure we don't hang
forever flushing when we really need ENOSPC.  Plus we allocate chunks in
order to alleviate the pressure, but this doesn't actually help us since we
only use the non-allocated area in our over commit logic.

So instead of basing overcommit on the amount of non-allocated space,
instead just do it based on how much total space we have, and then limit it
to the non-allocated space in case we are short on space to spill over into.
This allows us to have the same performance as well as no longer giving
random ENOSPC.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Dave sent me a panic where we were doing the orphan cleanup and panic'ed
trying to release our reservation from the orphan block rsv.  The reason for
this is because our orphan block rsv had been free'd out from underneath us
because the transaction commit found that there were no orphan inodes
according to its count and decided to free it.  This is incorrect so make
sure we inc the orphan inodes count so the accounting is all done properly.
This would also cause the warning in the orphan commit code normally if you
had any orphans to cleanup as they would only decrement the orphan count so
you'd get a negative orphan count which could cause problems during runtime.
Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

When a transaction aborts or there's an EIO on an ordered extent or any
error really we will not free up the space we reserved for this ordered
extent.  This results in warnings from the block group cache cleanup in the
case of a transaction abort, or leaking space in the case of EIO on an
ordered extent.  Fix this up by free'ing the reserved space if we have an
error at all trying to complete an ordered extent.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

When we abort we've been just free'ing up all the ordered extents and
hoping for the best.  This results in lots of warnings from various places,
warnings from btrfs_destroy_inode() because it's ENOSPC accounting isn't
fixed.  It will also screw up lots of pages who have been set private but
never get cleared because the ordered extents are never allowed to be
submitted.  This patch fixes those warnings.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

I hit this error when reproducing a bug that would end in a transaction
abort.  We take the delayed ref head's mutex to keep anybody from processing
it while we're destroying it, but we fail to drop the mutex before we carry
on and free the damned thing.  Fix this by doing the remove logic for the
head ourselves and unlock the mutex, that way we can avoid use after free's
or hung tasks waiting on that mutex to come back so they know the delayed
ref completed.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>