This patch adds new BIT detection to enable FC-NVMe feature in the driver.

[mkp: fixed Giridhar's SoB]
Signed-off-by: NGiridhar Malavali <gmalavali@marvell.com>
Signed-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Reviewed-by: NEwan D. Milne <emilne@redhat.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This call must have been missed when I reworked the debugfs feature for
upstreaming, so add it back.
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

A NULL-pointer dereference was introduced for TMF SSP commands from the
upstreaming reworking.

Fix this by relocating the scsi_get_prot_op() callsite.

Fixes: d6a9000b ("scsi: hisi_sas: Add support for DIF feature for v2 hw")
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Sparse detected some problems in the driver, so tidy them up.
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Some sizes we allocate for debugfs structure are incorrect, so fix them.
Signed-off-by: NLuo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Hot-plugging SAS wire of direct hard disk backplane may cause disk lost. We
have done this test with several types of SATA disk from different venders,
and only two models from Seagate has this problem, ST4000NM0035-1V4107 and
ST3000VM002-1ET166.

The root cause is that the disk doesn't send D2H frame after OOB finished.
SAS controller will issue phyup interrupt only when D2H frame is received,
otherwise, will be waiting there all the time.

When this issue happen, we can find the disk again with link reset.  To fix
this issue, we setup an timer after OOB finished. If the PHY is not up in
20s, do link reset. Notes: the 20s is an experience value.
Signed-off-by: NXiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The SAS controller cannot support a programmed minimum linkrate of > 1.5G
(it will always negotiate to 1.5G at least), so just reject it.

This solves a strange situation where the PHY negotiated linkrate may be
less than the programmed minimum linkrate.
Signed-off-by: NLuo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

In function hisi_sas_alloc(), parameter shost is not used, so remove it.
Signed-off-by: NXiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

When issing a hardreset to a SATA device when running IO, it is possible
that abnormal CQs of the device are returned. Then enter error handler, it
doesn't enter function hisi_sas_abort_task() as there is no timeout IO, and
it doesn't set device as HISI_SAS_DEV_EH. So when hardreset by libata
later, it actually doesn't issue hardreset as there is a check to judge
whether device is in error.

For this situation, actually need to hardreset the device to recover.
So remove the check of sas_dev status in hisi_sas_I_T_nexus_reset().

Before we add the check to avoid the endless loop of reset for
directly-attached SATA device at probe time, actually we flutter it for
it, so it is not necessary to add the check now.
Signed-off-by: NXiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

When injecting 2 bit ECC error, it will cause fatal AXI interrupts. Before
the recovery of SAS controller reset, the internal of SAS controller is in
error. If CQ interrupts return at the time, actually it is exception CQ
interrupt, and it may cause resource release in disorder.

To avoid the exception situation, shutdown AXI bus after fatal AXI
interrupt. In SAS controller reset, it will restart AXI bus. For later
version of v3 hw, hardware will shutdown AXI bus for this situation, so
just fix current ver of v3 hw.
Signed-off-by: NXiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Send primitive NOTIFY to SSP situation only, or it causes underflow issue
when sending IO. Also rename hisi_sas_hw.sl_notify() to hisi_sas_hw.
sl_notify_ssp().
Signed-off-by: NXiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch creates debugfs file for ITCT and adds file operations.
Signed-off-by: NLuo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Sparse can detect some type casting issues in the debugfs code, so fix it
up.

Also a missing static qualifier is added to hisi_sas_debugfs_to_reg_name().
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

When calling debugfs functions, there is no need to ever check the return
value. The function can work or not, but the code logic should never do
something different based on this.
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Clang warns:

drivers/scsi/pcmcia/nsp_cs.c:1137:27: warning: equality comparison with
extraneous parentheses [-Wparentheses-equality]
                if ((tmpSC->SCp.Message == MSG_COMMAND_COMPLETE)) {
                     ~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/pcmcia/nsp_cs.c:1137:27: note: remove extraneous
parentheses around the comparison to silence this warning
                if ((tmpSC->SCp.Message == MSG_COMMAND_COMPLETE)) {
                    ~                   ^                      ~
drivers/scsi/pcmcia/nsp_cs.c:1137:27: note: use '=' to turn this
equality comparison into an assignment
                if ((tmpSC->SCp.Message == MSG_COMMAND_COMPLETE)) {
                                        ^~
                                        =
1 warning generated.
Signed-off-by: NNathan Chancellor <natechancellor@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Clang warns:

drivers/scsi/nsp32.c:2444:14: warning: explicitly assigning value of
variable of type 'unsigned char' to itself [-Wself-assign]
        offset      = offset;
        ~~~~~~      ^
Signed-off-by: NNathan Chancellor <natechancellor@gmail.com>
Acked-by: NGOTO Masanori <gotom@debian.or.jp>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Currently, the Kbuild core manipulates header search paths in a crazy way
[1].

To fix this mess, I want all Makefiles to add explicit $(srctree)/ to the
search paths in the srctree. Some Makefiles are already written in that
way, but not all. The goal of this work is to make the notation consistent,
and finally get rid of the gross hacks.

Having whitespaces after -I does not matter since commit 48f6e3cf
("kbuild: do not drop -I without parameter").

[1]: https://patchwork.kernel.org/patch/9632347/Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

I was able to build without these extra header search paths.

Especially, the header search path -I. in kernel Makefiles is always
suspicious; it allows the compiler to search for headers in the top of
$(srctree), where obviously no header file exists.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/scsi/fnic/vnic_wq.c: In function 'vnic_wq_alloc_bufs':
drivers/scsi/fnic/vnic_wq.c:50:19: warning:
 variable 'vdev' set but not used [-Wunused-but-set-variable]

drivers/scsi/fnic/vnic_rq.c: In function 'vnic_rq_alloc_bufs':
drivers/scsi/fnic/vnic_rq.c:30:19: warning:
 variable 'vdev' set but not used [-Wunused-but-set-variable]

Never used since introduction.
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Acked-by: NSatish Kharat <satishkh@cisco.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Since the READ(6) and WRITE(6) commands interpret a zero in the transfer
length field in the CDB as 256 logical blocks, avoid submitting such
commands.

Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Reported-by: NDouglas Gilbert <dgilbert@interlog.com>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Reviewed-by: NDouglas Gilbert <dgilbert@interlog.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Since the function scsi_to_u32() is identical to get_unaligned_be32(),
change all scsi_to_u32() calls into get_unaligned_be32() calls.

Cc: Jian Luo <luojian5@huawei.com>
Cc: John Garry <john.garry@huawei.com>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Reviewed-by: NJohn Garry <john.garry@huawei.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

There are two statements that are indented incorrectly. Fix these.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Acked-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

When calling debugfs functions, there is no need to ever check the return
value.  The function can work or not, but the code logic should never do
something different based on this.

Cc: qla2xxx-upstream@qlogic.com
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

When calling debugfs functions, there is no need to ever check the return
value.  The function can work or not, but the code logic should never do
something different based on this.

Cc: QLogic-Storage-Upstream@cavium.com
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: NManish Rangankar <mrangankar@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

When calling debugfs functions, there is no need to ever check the return
value.  The function can work or not, but the code logic should never do
something different based on this.

Cc: James Smart <james.smart@broadcom.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

When calling debugfs functions, there is no need to ever check the return
value.  The function can work or not, but the code logic should never do
something different based on this.

Cc: Karan Tilak Kumar <kartilak@cisco.com>
Cc: Sesidhar Baddela <sebaddel@cisco.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

When calling debugfs functions, there is no need to ever check the return
value.  The function can work or not, but the code logic should never do
something different based on this.

Cc: Satish Kharat <satishkh@cisco.com>
Cc: Sesidhar Baddela <sebaddel@cisco.com>
Cc: Karan Tilak Kumar <kartilak@cisco.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: NSatish Kharat <satishkh@cisco.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

When calling debugfs functions, there is no need to ever check the return
value.  The function can work or not, but the code logic should never do
something different based on this.

Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Varun Prakash <varun@chelsio.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Oza Pawandeep <poza@codeaurora.org>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

When calling debugfs functions, there is no need to ever check the return
value.  The function can work or not, but the code logic should never do
something different based on this.

[mkp: removed unused label]

Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com>
Cc: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

I'll be moving on to different things in the storage stack and Hannes
agreed to take over FCoE.

Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: NJohannes Thumshirn <jthumshirn@suse.de>
Acked-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

There's no need to export fcoe_ctlr_destroy_store as a symbol, so remove
the EXPORT_SYMBOL() line for it.

Cc: Johannes Thumshirn <jth@kernel.org>
Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

We are trying to get rid of BUS_ATTR() and the usage of that in the fcoe
driver can be trivially converted to use BUS_ATTR_WO(), so use that
instead.

Cc: Johannes Thumshirn <jth@kernel.org>
Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

From Ching Huang <ching2048@areca.com.tw>

Update driver version to v1.40.00.10-20190116.
Signed-off-by: NChing Huang <ching2048@areca.com.tw>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

From Ching Huang <ching2048@areca.com.tw>

For ACB_ADAPTER_TYPE_B controller, the read/write after hibernate and
resume may sometimes result in 'isr get an illegal ccb command' in
/var/log/messages. This patch fixes it.
Signed-off-by: NChing Huang <ching2048@areca.com.tw>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

From Ching Huang <ching2048@areca.com.tw>

dma_zalloc_coherent will be phased out. Use dma_alloc_coherent instead.
Signed-off-by: NChing Huang <ching2048@areca.com.tw>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Update fnic driver to version 1.6.0.47.
Signed-off-by: NSatish Kharat <satishkh@cisco.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch adds changes to check if fnic devcmd2 interface is exported by
the firmware. If devcmd2 interfaces is exported, driver starts using it
else falls back to fnic devcmd1 interface.
Signed-off-by: NSatish Kharat <satishkh@cisco.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch adds fnic devcmd2 interfaces for initialization and posting
commands to fw.
Signed-off-by: NSatish Kharat <satishkh@cisco.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch adds the devcmd2 wq initalization and devcmd2 ring allocation
helper interfaces used by devcmd2 init.

[mkp: typos]
Signed-off-by: NSatish Kharat <satishkh@cisco.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch adds the fnic devcmd2 controller definitions.
Signed-off-by: NSatish Kharat <satishkh@cisco.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>