Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

convert them to nr_irqs.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

also add first_free_entry and pin_map_size, which were NR_IRQS derived
constants.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

at this point nr_irqs is equal NR_IRQS

convert a few easy users from NR_IRQS to dynamic nr_irqs.

v2: according to Eric, we need to take care of arch without generic_hardirqs
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

so could spare some memory with small alignment in bootmem

also tighten the alignment checking, and make print out less debug info.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

allow dyn-array in per_cpu area, allocated dynamically.

usage:

|  /* in .h */
| struct kernel_stat {
|        struct cpu_usage_stat   cpustat;
|        unsigned int *irqs;
| };
|
|  /* in .c */
| DEFINE_PER_CPU(struct kernel_stat, kstat);
|
| DEFINE_PER_CPU_DYN_ARRAY_ADDR(per_cpu__kstat_irqs, per_cpu__kstat.irqs, sizeof(unsigned int), nr_irqs, sizeof(unsigned long), NULL);

after setup_percpu()/per_cpu_alloc_dyn_array(), the dyn_array in
per_cpu area is ready to use.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Allow crazy big arrays via bootmem at init stage.
Architectures use CONFIG_HAVE_DYN_ARRAY to enable it.

usage:

| static struct irq_desc irq_desc_init __initdata = {
|        .status = IRQ_DISABLED,
|        .chip = &no_irq_chip,
|        .handle_irq = handle_bad_irq,
|        .depth = 1,
|        .lock = __SPIN_LOCK_UNLOCKED(irq_desc->lock),
| #ifdef CONFIG_SMP
|        .affinity = CPU_MASK_ALL
| #endif
| };
|
| static void __init init_work(void *data)
| {
|        struct dyn_array *da = data;
|        struct  irq_desc *desc;
|        int i;
|
|        desc = *da->name;
|
|        for (i = 0; i < *da->nr; i++)
|                memcpy(&desc[i], &irq_desc_init, sizeof(struct irq_desc));
| }
|
| struct irq_desc *irq_desc;
| DEFINE_DYN_ARRAY(irq_desc, sizeof(struct irq_desc), nr_irqs, PAGE_SIZE, init_work);

after pre_alloc_dyn_array() after setup_arch(), the array is ready to be
used.

Via this facility we can replace irq_desc[NR_IRQS] array with dyn_array
irq_desc[nr_irqs].

v2: remove _nopanic in pre_alloc_dyn_array()
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

there's no user left.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

to prepare to use dyn_array support etc.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Works on my test box with a quick test.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  i2c-viapro: Add support for SMBus Process Call transactions
  i2c: Restore i2c_smbus_process_call function
  i2c: Do earlier driver model init
  i2c: Only build Tyan SMBus mux drivers on x86
  i2c: Guard against oopses from bad init sequences
  i2c: Document the implementation details of the /dev interface
  i2c: Improve dev-interface documentation
  i2c-parport-light: Don't register a platform device resource
  hwmon: (dme1737) Convert to a new-style i2c driver
  hwmon: (dme1737) Be less i2c-centric
  i2c/tps65010: Vibrator hookup to gpiolib
  i2c-viapro: Add VX800/VX820 support
  i2c: Renesas Highlander FPGA SMBus support
  i2c-pca-isa: Don't grab arbitrary resources
  i2c/isp1301_omap: Convert to a new-style i2c driver, part 2
  i2c/isp1301_omap: Convert to a new-style i2c driver, part 1

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (55 commits)
  HID: build drivers for all quirky devices by default
  HID: add missing blacklist entry for Apple ATV ircontrol
  HID: add support for Bright ABNT2 brazilian device
  HID: Don't let Avermedia Radio FM800 be handled by usb hid drivers
  HID: fix numlock led on Dell device 0x413c/0x2105
  HID: remove warn() macro from usb hid drivers
  HID: remove info() macro from usb HID drivers
  HID: add appletv IR receiver quirk
  HID: fix a lockup regression when using force feedback on a PID device
  HID: hiddev.h: Fix example code.
  HID: hiddev.h: Fix mixed space and tabs in example code.
  HID: convert to dev_* prints
  HID: remove hid-ff
  HID: move zeroplus FF processing
  HID: move thrustmaster FF processing
  HID: move pantherlord FF processing
  HID: fix incorrent length condition in hidraw_write()
  HID: fix tty<->hid deadlock
  HID: ignore iBuddy devices
  HID: report descriptor fix for remaining MacBook JIS keyboards
  ...

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: (56 commits)
  ocfs2: Make cached block reads the common case.
  ocfs2: Kill the last naked wait_on_buffer() for cached reads.
  ocfs2: Move ocfs2_bread() into dir.c
  ocfs2: Simplify ocfs2_read_block()
  ocfs2: Require an inode for ocfs2_read_block(s)().
  ocfs2: Separate out sync reads from ocfs2_read_blocks()
  ocfs2: Refactor xattr list and remove ocfs2_xattr_handler().
  ocfs2: Calculate EA hash only by its suffix.
  ocfs2: Move trusted and user attribute support into xattr.c
  ocfs2: Uninline ocfs2_xattr_name_hash()
  ocfs2: Don't check for NULL before brelse()
  ocfs2: use smaller counters in ocfs2_remove_xattr_clusters_from_cache
  ocfs2: Documentation update for user_xattr / nouser_xattr mount options
  ocfs2: make la_debug_mutex static
  ocfs2: Remove pointless !!
  ocfs2: Add empty bucket support in xattr.
  ocfs2/xattr.c: Fix a bug when inserting xattr.
  ocfs2: Add xattr mount option in ocfs2_show_options()
  ocfs2: Switch over to JBD2.
  ocfs2: Add the 'inode64' mount option.
  ...

We shouldn't rely on "pnp_platform_devices" to tell us whether there
is a PNP RTC device.

I introduced "pnp_platform_devices", but I think it was a mistake.
All it tells us is whether we found any PNPBIOS or PNPACPI devices.
Many machines have some PNP devices, but do not describe the RTC
via PNP.  On those machines, we need to do the platform driver probe
to find the RTC.

We should just register the PNP driver and see whether it claims anything.
If we don't find a PNP RTC, fall back to the platform driver probe.

This (in conjunction with the arch/x86/kernel/rtc.c patch to add
a platform RTC device when PNP doesn't have one) should resolve
these issues:

    http://bugzilla.kernel.org/show_bug.cgi?id=11580
    https://bugzilla.redhat.com/show_bug.cgi?id=451188Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Reported-by: NRik Theys <rik.theys@esat.kuleuven.be>
Reported-by: shr_msn@yahoo.com.tw
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Most if not all x86 platforms have an RTC device, but sometimes the RTC
is not exposed as a PNP0b00/PNP0b01/PNP0b02 device in PNPBIOS or ACPI:

    http://bugzilla.kernel.org/show_bug.cgi?id=11580
    https://bugzilla.redhat.com/show_bug.cgi?id=451188

It's best if we can discover the RTC via PNP because then we know
which flavor of device it is, where it lives, and which IRQ it uses.

But if we can't, we should register a platform device using the
compiled-in RTC_PORT/RTC_IRQ resource assumptions.
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Reported-by: NRik Theys <rik.theys@esat.kuleuven.be>
Reported-by: shr_msn@yahoo.com.tw
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Move rtc_wake_setup() from drivers/acpi/glue.c into the RTC driver
in drivers/rtc/rtc-cmos.c.

This removes the ordering constraint between the module_init(acpi_rtc_init)
and the cmos_do_probe() code that depends on it.
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Once kernel configuration has CONFIG_HID turned on, let also all the
specialized drivers for quirky devices to be built (unless CONFIG_EMBEDDED is
specified), as usually users don't care that much which driver
gives them the functionality, but when they want generic support, they
probably want to have support for all the quirky devices as well.
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This device is already handled by hid-apple driver, but the blacklist entry
was missing in generic driver.
Reported-by: NJiri Slaby <jslaby@suse.cz>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This keyboard needs to reset the LEDS during probe.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Based on an original patch from Alexey Klimov <klimov.linux@gmail.com>,
against kernel version 2.6.27.

This device is already handled by radio-mr800 driver, and we therefore
want usbhid not to touch it.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This keyboard needs to re-sync numlock after probing.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

USB should not be having it's own printk macros, so remove warn() and
use the system-wide standard of dev_warn() wherever possible.  In the
few places that will not work out, use a basic printk().
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

USB should not be having it's own printk macros, so remove info() and
use the system-wide standard of dev_info() wherever possible.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Similar to the existing IRCONTROL4 handling
Signed-off-by: NPeter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Commit 8006479c introduced a spinlock in
input_dev->event_lock, which is locked when handling input events.
However, the hid-pidff driver sleeps when handling events as it waits for
reports being sent to the device before changing the report contents
again.
This causes a system lockup when trying to use force feedback with a PID
device, a regression introduced in 2.6.24 and 2.6.23.15.

Fix it by extracting the raw report data from struct hid_report
immediately when hid_submit_report() is called, therefore allowing
drivers to change the contents of struct hid_report immediately without
affecting the already-queued transfer.

In hid-pidff, re-add the removed usbhid_wait_io() to
pidff_erase_effect() instead, to prevent a full report queue from causing
the submission to fail, thus not freeing up device memory.
pidff_erase_effect() is not called while dev->event_lock is held.
Signed-off-by: NAnssi Hannula <anssi.hannula@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Fix hiddev.h example code.
To get the correct usage code, you need to set report_type and
report_id.
Signed-off-by: NAntonio Ospite <ospite@studenti.unina.it>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Fix mixed space and tabs in example code.
Signed-off-by: NAntonio Ospite <ospite@studenti.unina.it>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Since we have a real device bound to a driver, we may use struct
device for printing. Use dev_* functions instead of printks in
4 drivers.
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

hid-ff.c now calls only pidff (generic driver), the special ones are now
in separate drivers. Invoke pidff on all non-special directly.
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Move the force feedback processing into a separate module.

[jkosina@suse.cz: fix Kconfig texts a little bit]
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The bound check on the buffer length

	if (count > HID_MIN_BUFFER_SIZE)

is of course incorrent, the proper check is

	if (count > HID_MAX_BUFFER_SIZE)

Fix it.
Reported-by: NJerry Ryle <jerry@mindtribe.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

hid_compat_load() runs on the default workqueue, it request_module(), it
execs modprobe, it exits, tty flushes default workqueue, it hangs, because
we are still in it.
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Tested-by: <Valdis.Kletnieks@vt.edu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>