We are moving towards separate kernel and module function descriptor
dereference callbacks. This patch enables it for parisc64.

For pointers that belong to the kernel
-  Added __start_opd and __end_opd pointers, to track the kernel
   .opd section address range;

-  Added dereference_kernel_function_descriptor(). Now we
   will dereference only function pointers that are within
   [__start_opd, __end_opd);

For pointers that belong to a module
-  Added dereference_module_function_descriptor() to handle module
   function descriptor dereference. Now we will dereference only
   pointers that are within [module->opd.start, module->opd.end).

Link: http://lkml.kernel.org/r/20171109234830.5067-5-sergey.senozhatsky@gmail.com
To: Tony Luck <tony.luck@intel.com>
To: Fenghua Yu <fenghua.yu@intel.com>
To: Helge Deller <deller@gmx.de>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>
To: Paul Mackerras <paulus@samba.org>
To: Michael Ellerman <mpe@ellerman.id.au>
To: James Bottomley <jejb@parisc-linux.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-ia64@vger.kernel.org
Cc: linux-parisc@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Tested-by: Helge Deller <deller@gmx.de> #parisc64
Signed-off-by: NPetr Mladek <pmladek@suse.com>

We are moving towards separate kernel and module function descriptor
dereference callbacks. This patch enables it for powerpc64.

For pointers that belong to the kernel
-  Added __start_opd and __end_opd pointers, to track the kernel
   .opd section address range;

-  Added dereference_kernel_function_descriptor(). Now we
   will dereference only function pointers that are within
   [__start_opd, __end_opd);

For pointers that belong to a module
-  Added dereference_module_function_descriptor() to handle module
   function descriptor dereference. Now we will dereference only
   pointers that are within [module->opd.start, module->opd.end).

Link: http://lkml.kernel.org/r/20171109234830.5067-4-sergey.senozhatsky@gmail.com
To: Tony Luck <tony.luck@intel.com>
To: Fenghua Yu <fenghua.yu@intel.com>
To: Helge Deller <deller@gmx.de>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>
To: Paul Mackerras <paulus@samba.org>
To: Michael Ellerman <mpe@ellerman.id.au>
To: James Bottomley <jejb@parisc-linux.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-ia64@vger.kernel.org
Cc: linux-parisc@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Signed-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Tested-by: Santosh Sivaraj <santosh@fossix.org> #powerpc
Signed-off-by: NPetr Mladek <pmladek@suse.com>

We are moving towards separate kernel and module function descriptor
dereference callbacks. This patch enables it for IA64.

For pointers that belong to the kernel
-  Added __start_opd and __end_opd pointers, to track the kernel
   .opd section address range;

-  Added dereference_kernel_function_descriptor(). Now we
   will dereference only function pointers that are within
   [__start_opd, __end_opd);

For pointers that belong to a module
-  Added dereference_module_function_descriptor() to handle module
   function descriptor dereference. Now we will dereference only
   pointers that are within [module->opd.start, module->opd.end).

Link: http://lkml.kernel.org/r/20171109234830.5067-3-sergey.senozhatsky@gmail.com
To: Fenghua Yu <fenghua.yu@intel.com>
To: Helge Deller <deller@gmx.de>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>
To: Paul Mackerras <paulus@samba.org>
To: Michael Ellerman <mpe@ellerman.id.au>
To: James Bottomley <jejb@parisc-linux.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-ia64@vger.kernel.org
Cc: linux-parisc@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Tested-by: Tony Luck <tony.luck@intel.com> #ia64
Signed-off-by: NPetr Mladek <pmladek@suse.com>

There are two format specifiers to print out a pointer in symbolic
format: '%pS/%ps' and '%pF/%pf'. On most architectures, the two
mean exactly the same thing, but some architectures (ia64, ppc64,
parisc64) use an indirect pointer for C function pointers, where
the function pointer points to a function descriptor (which in
turn contains the actual pointer to the code). The '%pF/%pf, when
used appropriately, automatically does the appropriate function
descriptor dereference on such architectures.

The "when used appropriately" part is tricky. Basically this is
a subtle ABI detail, specific to some platforms, that made it to
the API level and people can be unaware of it and miss the whole
"we need to dereference the function" business out. [1] proves
that point (note that it fixes only '%pF' and '%pS', there might
be '%pf' and '%ps' cases as well).

It appears that we can handle everything within the affected
arches and make '%pS/%ps' smart enough to retire '%pF/%pf'.
Function descriptors live in .opd elf section and all affected
arches (ia64, ppc64, parisc64) handle it properly for kernel
and modules. So we, technically, can decide if the dereference
is needed by simply looking at the pointer: if it belongs to
.opd section then we need to dereference it.

The kernel and modules have their own .opd sections, obviously,
that's why we need to split dereference_function_descriptor()
and use separate kernel and module dereference arch callbacks.

This patch does the first step, it
a) adds dereference_kernel_function_descriptor() function.
b) adds a weak alias to dereference_module_function_descriptor()
   function.

So, for the time being, we will have:
1) dereference_function_descriptor()
   A generic function, that simply dereferences the pointer. There is
   bunch of places that call it: kgdbts, init/main.c, extable, etc.

2) dereference_kernel_function_descriptor()
   A function to call on kernel symbols that does kernel .opd section
   address range test.

3) dereference_module_function_descriptor()
   A function to call on modules' symbols that does modules' .opd
   section address range test.

[1] https://marc.info/?l=linux-kernel&m=150472969730573

Link: http://lkml.kernel.org/r/20171109234830.5067-2-sergey.senozhatsky@gmail.com
To: Fenghua Yu <fenghua.yu@intel.com>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>
To: Paul Mackerras <paulus@samba.org>
To: Michael Ellerman <mpe@ellerman.id.au>
To: James Bottomley <jejb@parisc-linux.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-ia64@vger.kernel.org
Cc: linux-parisc@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Tested-by: Tony Luck <tony.luck@intel.com> #ia64
Tested-by: Santosh Sivaraj <santosh@fossix.org> #powerpc
Tested-by: Helge Deller <deller@gmx.de> #parisc64
Signed-off-by: NPetr Mladek <pmladek@suse.com>

The printk tree in linux-next has a patch "symbol lookup: introduce
dereference_symbol_descriptor()" that includes sections.h in kallsyms.h,
so arch/openrisc/kernel/traps.c gets a second extern definition for
_etext and _stext.

Remove the local definitions and include sections.h directly in
preparation for the kallsyms.h change.

This fixes the following (future) build error:

  CC      arch/openrisc/kernel/traps.o
arch/openrisc/kernel/traps.c:43:13: error: conflicting types for ‘_etext’
 extern char _etext, _stext;
             ^
In file included from ./arch/openrisc/include/generated/asm/sections.h:1:0,
                 from ./include/linux/kallsyms.h:15,
                 from arch/openrisc/kernel/traps.c:35:
./include/asm-generic/sections.h:35:32: note: previous declaration of ‘_etext’ was here
 extern char _text[], _stext[], _etext[];
                                ^
Signed-off-by: NJoel Stanley <joel@jms.id.au>
Reviewed-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: NStafford Horne <shorne@gmail.com>
Signed-off-by: NPetr Mladek <pmladek@suse.com>

Move local "sched.h" include to the bottom. sched.h defines
several macros that are getting redefined in ARCH-specific
code, for instance, finish_arch_post_lock_switch() and
prepare_arch_switch(), so we need ARCH-specific definitions
to come in first.

Link: http://lkml.kernel.org/r/20171208082422.5021-1-sergey.senozhatsky@gmail.com
To: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: LKML <linux-kernel@vger.kernel.org>
Cc: linux-pm@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Cc: linux-mm@kvack.org
Suggested-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: NPetr Mladek <pmladek@suse.com>

Autogroup does not seem to use any of kallsyms functions/defines.

Link: http://lkml.kernel.org/r/20171208025616.16267-2-sergey.senozhatsky@gmail.com
To: Andrew Morton <akpm@linux-foundation.org>
To: Michal Hocko <mhocko@suse.com>
To: Rafael Wysocki <rjw@rjwysocki.net>
To: Len Brown <len.brown@intel.com>
To: Bjorn Helgaas <bhelgaas@google.com>
To: Vlastimil Babka <vbabka@suse.cz>
To: Tejun Heo <tj@kernel.org>
To: Lai Jiangshan <jiangshanlai@gmail.com>
To: Thomas Gleixner <tglx@linutronix.de>
To: Fengguang Wu <fengguang.wu@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: LKML <linux-kernel@vger.kernel.org>
Cc: linux-pm@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Cc: linux-mm@kvack.org
Signed-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: NPetr Mladek <pmladek@suse.com>

Pull printk updates from Petr Mladek:

 - print the warning about dropped messages on consoles on a separate
   line.   It makes it more legible.

 - one typo fix and small code clean up.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
  added new line symbol after warning about dropped messages
  printk: fix typo in printk_safe.c
  printk: simplify no_printk()

Pull fbdev updates from Bartlomiej Zolnierkiewicz:
 "There is nothing really major here (though removal of the dead igafb
  driver stands out in diffstat).

  Summary:

   - convert timers to use timer_setup() (Kees Cook, Thierry Reding)

   - fix panels support on iMX boards in mxsfb driver (Stefan Agner)

   - fix timeout on EDID read in udlfb driver (Ladislav Michl)

   - add missing modes to fix out of bounds access in controlfb driver
     (Geert Uytterhoeven)

   - update initialisation paths in sa1100fb driver to be more robust
     (Russell King)

   - fix error handling path of ->probe method in au1200fb driver
     (Christophe JAILLET)

   - fix handling of cases when either panel or crt is defined in
     sm501fb driver (Sudip Mukherjee, Colin Ian King)

   - add ability to the Goldfish FB driver to be recognized by OS via DT
     (Aleksandar Markovic)

   - structures constifications (Bhumika Goyal)

   - misc fixes (Allen Pais, Gustavo A. R. Silva, Dan Carpenter)

   - misc cleanups (Colin Ian King, Himanshu Jha, Markus Elfring)

   - remove dead igafb driver"

* tag 'fbdev-v4.15' of git://github.com/bzolnier/linux: (42 commits)
  OMAPFB: prevent buffer underflow in omapfb_parse_vram_param()
  video: fbdev: sm501fb: fix potential null pointer dereference on fbi
  fbcon: Initialize ops->info early
  video: fbdev: Convert timers to use timer_setup()
  video: fbdev: pxa3xx_gcu: Convert timers to use timer_setup()
  fbdev: controlfb: Add missing modes to fix out of bounds access
  video: fbdev: sis_main: mark expected switch fall-throughs
  video: fbdev: cirrusfb: mark expected switch fall-throughs
  video: fbdev: aty: radeon_pm: mark expected switch fall-throughs
  video: fbdev: sm501fb: mark expected switch fall-through in sm501fb_blank_crt
  video: fbdev: intelfb: remove redundant variables
  video/fbdev/dnfb: Use common error handling code in dnfb_probe()
  sm501fb: suspend and resume fb if it exists
  sm501fb: unregister framebuffer only if registered
  sm501fb: deallocate colormap only if allocated
  video: goldfishfb: Add support for device tree bindings
  Documentation: Add device tree binding for Goldfish FB driver
  video: udlfb: Fix read EDID timeout
  video: fbdev: remove dead igafb driver
  video: fbdev: mxsfb: fix pixelclock polarity
  ...

Pull DeviceTree fixes from Rob Herring:

 - Remove mc13892 as a trivial device

 - Improve of_find_node_by_name() documentation

 - Fix unit test dtc warnings

 - Clean-ups of USB binding documentation

 - Fix potential NULL deref in of_pci_map_rid

* tag 'devicetree-fixes-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: trivial-devices: Remove fsl,mc13892
  of: Document exactly what of_find_node_by_name() puts
  of: unittest: disable interrupts_property warning
  of: unittest: let dtc generate __local_fixups__
  dt-bindings: usb: document hub and host-controller properties
  dt-bindings: usb: clean up compatible property
  dt-bindings: usb: fix reg-property port-number range
  dt-bindings: usb: fix example hub node name
  of/pci: Fix theoretical NULL dereference

Pull jfs fixlet from Dave Kleikamp:
 "Update jfs git tree in MAINTAINERS"

* tag 'jfs-4.15-2' of git://github.com/kleikamp/linux-shaggy:
  MAINTAINERS: fix jfs tree location

This device's bindings are not trivial: Additional properties are
documented in in Documentation/devicetree/bindings/mfd/mc13xxx.txt.
Signed-off-by: NJonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: NFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: NRob Herring <robh@kernel.org>

It isn't clear if this function of_node_put()s the 'from'
argument, or the node it searches. Clearly indicate which
variable is touched. Fold in some more fixes from Randy too
because we're in the area.

Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Acked-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NRob Herring <robh@kernel.org>

JFS tree has been moved to github.
Signed-off-by: NTom Saeger <tom.saeger@oracle.com>
Signed-off-by: NDave Kleikamp <dave.kleikamp@oracle.com>

Pull ntb updates from Jon Mason:
 "Support for the switchtec ntb and related changes. Also, a couple of
  bug fixes"

[ The timing isn't great. I had asked people to send me pull requests
  before my family vacation, and this code has not even been in
  linux-next as far as I can tell. But Logan Gunthorpe pleaded for its
  inclusion because the Switchtec driver has apparently been around for
  a while, just never in linux-next - Linus ]

* tag 'ntb-4.15' of git://github.com/jonmason/ntb:
  ntb: intel: remove b2b memory window workaround for Skylake NTB
  NTB: make idt_89hpes_cfg const
  NTB: switchtec_ntb: Update switchtec documentation with notes for NTB
  NTB: switchtec_ntb: Add memory window support
  NTB: switchtec_ntb: Implement scratchpad registers
  NTB: switchtec_ntb: Implement doorbell registers
  NTB: switchtec_ntb: Add link management
  NTB: switchtec_ntb: Add skeleton NTB driver
  NTB: switchtec_ntb: Initialize hardware for doorbells and messages
  NTB: switchtec_ntb: Initialize hardware for memory windows
  NTB: switchtec_ntb: Introduce initial NTB driver
  NTB: Add check and comment for link up to mw_count() and mw_get_align()
  NTB: Ensure ntb_mw_get_align() is only called when the link is up
  NTB: switchtec: Add link event notifier callback
  NTB: switchtec: Add NTB hardware register definitions
  NTB: switchtec: Export class symbol for use in upper layer driver
  NTB: switchtec: Move structure definitions into a common header
  ntb: update maintainer list for Intel NTB driver

Commit b65a9cfc ("Untangling ima mess, part 2: deal with counters")
moved the call of ima_file_check() from may_open() to do_filp_open() at a
point where the file descriptor is already opened.

This breaks the assumption made by IMA that file descriptors being closed
belong to files whose access was granted by ima_file_check(). The
consequence is that security.ima and security.evm are updated with good
values, regardless of the current appraisal status.

For example, if a file does not have security.ima, IMA will create it after
opening the file for writing, even if access is denied. Access to the file
will be allowed afterwards.

Avoid this issue by checking the appraisal status before updating
security.ima.

Cc: stable@vger.kernel.org
Signed-off-by: NRoberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: NJames Morris <james.l.morris@oracle.com>

Pull small IDE cleanup from David Miller.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide:
  PNP: ide: constify pnp_device_id

The workaround code is never used because Skylake NTB does not need it.
Reported-by: NAllen Hubbe <allen.hubbe@dell.com>
Signed-off-by: NDave Jiang <dave.jiang@intel.com>
Signed-off-by: NJon Mason <jdmason@kudzu.us>

Make these const as they are only used during a copy operation.
Done using Coccinelle.
Signed-off-by: NBhumika Goyal <bhumirks@gmail.com>
Signed-off-by: NJon Mason <jdmason@kudzu.us>

The switchtec_ntb driver has a couple requirements on the switchec's
hardware configuration so we add these notes to the documentation.
Signed-off-by: NLogan Gunthorpe <logang@deltatee.com>
Reviewed-by: NStephen Bates <sbates@raithlin.com>
Reviewed-by: NKurt Schwemmer <kurt.schwemmer@microsemi.com>
Acked-by: NAllen Hubbe <Allen.Hubbe@dell.com>
Signed-off-by: NJon Mason <jdmason@kudzu.us>

The Switchtec hardware has two types of memory windows: LUTs and Direct.
The first area in each BAR is for LUT windows and the remaining area is
for the direct region. The total number of LUT entries is set by a
configuration setting in hardware and they all must be the same
size. (This is fixed by switchtec_ntb to be 64K.)

switchtec_ntb enables the LUTs only for the first BAR and enables the
highest power of two possible. Seeing the LUTs are at the beginning of
the BAR, the direct memory window's alignment is affected. Therefore,
the maximum direct memory window size can not be greater than the number
of LUTs times 64K. The direct window in other BARs will not have this
restriction as the LUTs will not be enabled there. LUTs will only be
exposed through the NTB API if the use_lut_mw parameter is set.

Seeing the Switchtec hardware, by default, configures BARs to be 4G a
module parameter is given to limit the size of the advertised memory
windows. Higher layers tend to allocate the maximum BAR size and this
has a tendency to fail when they try to allocate 4GB of contiguous
memory.
Signed-off-by: NLogan Gunthorpe <logang@deltatee.com>
Reviewed-by: NStephen Bates <sbates@raithlin.com>
Reviewed-by: NKurt Schwemmer <kurt.schwemmer@microsemi.com>
Acked-by: NAllen Hubbe <Allen.Hubbe@dell.com>
Signed-off-by: NJon Mason <jdmason@kudzu.us>

Seeing there is no dedicated hardware for this, we simply add
these as entries in the shared memory window. Thus, we could support
any number of them but 128 seems like enough, for now.
Signed-off-by: NLogan Gunthorpe <logang@deltatee.com>
Reviewed-by: NStephen Bates <sbates@raithlin.com>
Reviewed-by: NKurt Schwemmer <kurt.schwemmer@microsemi.com>
Acked-by: NAllen Hubbe <Allen.Hubbe@dell.com>
Signed-off-by: NJon Mason <jdmason@kudzu.us>

Pretty straightforward implementation of doorbell registers.
The shift and mask were setup in an earlier patch and this just hooks
up the appropriate portion of the IDB register as the local doorbells
and the opposite portion of ODB as the peer doorbells. The DB mask is
protected by a spinlock to avoid concurrent read-modify-write accesses.
Signed-off-by: NLogan Gunthorpe <logang@deltatee.com>
Reviewed-by: NStephen Bates <sbates@raithlin.com>
Reviewed-by: NKurt Schwemmer <kurt.schwemmer@microsemi.com>
Acked-by: NAllen Hubbe <Allen.Hubbe@dell.com>
Signed-off-by: NJon Mason <jdmason@kudzu.us>

switchtec_ntb checks for a link by looking at the shared memory
window. If the magic number is correct and the other side indicates
their link is enabled then we take the link to be up.

Whenever we change our local link status we send a msg to the
other side to check whether it's up and change their status.

The current status is maintained in a flag so ntb_is_link_up
can return quickly.

We utilize Switchtec's link status notifier to also check link changes
when the switch notices a port changes state.
Signed-off-by: NLogan Gunthorpe <logang@deltatee.com>
Reviewed-by: NStephen Bates <sbates@raithlin.com>
Reviewed-by: NKurt Schwemmer <kurt.schwemmer@microsemi.com>
Acked-by: NAllen Hubbe <Allen.Hubbe@dell.com>
Signed-off-by: NJon Mason <jdmason@kudzu.us>

Add a skeleton NTB driver which will be filled out in subsequent patches.
Signed-off-by: NLogan Gunthorpe <logang@deltatee.com>
Reviewed-by: NStephen Bates <sbates@raithlin.com>
Reviewed-by: NKurt Schwemmer <kurt.schwemmer@microsemi.com>
Acked-by: NAllen Hubbe <Allen.Hubbe@dell.com>
Signed-off-by: NJon Mason <jdmason@kudzu.us>

Set up some hardware registers and creates interrupt service routines
for the doorbells and messages.

There are 64 doorbells in the switch that are shared between all
partitions. The upper 4 doorbells are also shared with the messages
and are therefore not used. Thus, this provides 28 doorbells for each
partition.
Signed-off-by: NLogan Gunthorpe <logang@deltatee.com>
Reviewed-by: NStephen Bates <sbates@raithlin.com>
Reviewed-by: NKurt Schwemmer <kurt.schwemmer@microsemi.com>
Acked-by: NAllen Hubbe <Allen.Hubbe@dell.com>
Signed-off-by: NJon Mason <jdmason@kudzu.us>

Add the code to initialize the memory windows in the hardware.
This includes setting up the requester ID table, and figuring out
which BAR corresponds to which memory window. (Seeing the switch
can be configured with any number of BARs.)

Also, seeing the device doesn't have hardware for scratchpads or
determining the link status, we create a shared memory window that has
these features. A magic number with a version component will be used
to determine if the other side's driver is actually up.

The shared memory window also informs the other side of the
size and count of the local memory windows.
Signed-off-by: NLogan Gunthorpe <logang@deltatee.com>
Reviewed-by: NStephen Bates <sbates@raithlin.com>
Reviewed-by: NKurt Schwemmer <kurt.schwemmer@microsemi.com>
Acked-by: NAllen Hubbe <Allen.Hubbe@dell.com>
Signed-off-by: NJon Mason <jdmason@kudzu.us>

Seeing the Switchtec NTB hardware shares the same endpoint as the
management endpoint we utilize the class_interface API to register
an NTB driver for every Switchtec device in the system that has the
NTB class code.
Signed-off-by: NLogan Gunthorpe <logang@deltatee.com>
Reviewed-by: NStephen Bates <sbates@raithlin.com>
Reviewed-by: NKurt Schwemmer <kurt.schwemmer@microsemi.com>
Acked-by: NAllen Hubbe <Allen.Hubbe@dell.com>
Acked-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NJon Mason <jdmason@kudzu.us>

Adds a comment and a check to ntb_mw_get_align() so that it always fails
if the function is called before the link is up.

Also adds a comment to ntb_mw_count() to note that it may return 0 if
it is called before the link is up.

This is to prevent accidental mis-use in clients that are testing
on hardware that this doesn't matter for.
Signed-off-by: NLogan Gunthorpe <logang@deltatee.com>
Acked-by: NAllen Hubbe <Allen.Hubbe@dell.com>
Signed-off-by: NJon Mason <jdmason@kudzu.us>

With Switchtec hardware it's impossible to get the alignment parameters
for a peer's memory window until the peer's driver has configured its
windows. Strictly speaking, the link doesn't have to be up for this,
but the link being up is the only way the client can tell that
the other side has been configured.

This patch converts ntb_transport and ntb_perf to use this function after
the link goes up. This simplifies these clients slightly because they
no longer have to store the alignment parameters. It also tweaks
ntb_tool so that peer_mw_trans will print zero if it is run before
the link goes up.
Signed-off-by: NLogan Gunthorpe <logang@deltatee.com>
Acked-by: NAllen Hubbe <Allen.Hubbe@dell.com>
Signed-off-by: NJon Mason <jdmason@kudzu.us>

In order for the Switchtec NTB code to handle link change events we
create a notifier callback in the switchtec code which gets called
whenever an appropriate event interrupt occurs.

In order to preserve userspace's ability to follow these events,
we compare the event count with a stored copy from last time we
checked.
Signed-off-by: NLogan Gunthorpe <logang@deltatee.com>
Reviewed-by: NStephen Bates <sbates@raithlin.com>
Reviewed-by: NKurt Schwemmer <kurt.schwemmer@microsemi.com>
Acked-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NJon Mason <jdmason@kudzu.us>

There are two additional regions: ctrl and dbmsg. The first is
for generic NTB control and memory windows. The second is for doorbells
and message registers. This patch also adds a number of related
constants for using these registers.
Signed-off-by: NLogan Gunthorpe <logang@deltatee.com>
Reviewed-by: NStephen Bates <sbates@raithlin.com>
Reviewed-by: NKurt Schwemmer <kurt.schwemmer@microsemi.com>
Signed-off-by: NJon Mason <jdmason@kudzu.us>

We export the class pointer symbol and add an extern define in the
Switchtec header file.
Signed-off-by: NLogan Gunthorpe <logang@deltatee.com>
Reviewed-by: NStephen Bates <sbates@raithlin.com>
Reviewed-by: NKurt Schwemmer <kurt.schwemmer@microsemi.com>
Acked-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NJon Mason <jdmason@kudzu.us>

Create the switchtec.h header in include/linux with hardware defines
and the switchtec_dev structure. Both moved directly from switchtec.c.
This is a prep patch for creating an NTB driver for Switchtec.
Signed-off-by: NLogan Gunthorpe <logang@deltatee.com>
Reviewed-by: NStephen Bates <sbates@raithlin.com>
Reviewed-by: NKurt Schwemmer <kurt.schwemmer@microsemi.com>
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NJon Mason <jdmason@kudzu.us>

Removing Jon since he no longer works at Intel.
Signed-off-by: NDave Jiang <dave.jiang@intel.com>
Signed-off-by: NJon Mason <jdmason@kudzu.us>

The updates this merge window added several bogus default enablement for
new features.  We don't do that.  If people want new behavior, they ask
for it.

One 'default n' was also removed as pointless.  That's great, but there
were eight other ones in the same file that were left alone.

Fix it up.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull nfsd updates from Bruce Fields:
 "Lots of good bugfixes, including:

   -  fix a number of races in the NFSv4+ state code

   -  fix some shutdown crashes in multiple-network-namespace cases

   -  relax our 4.1 session limits; if you've an artificially low limit
      to the number of 4.1 clients that can mount simultaneously, try
      upgrading"

* tag 'nfsd-4.15' of git://linux-nfs.org/~bfields/linux: (22 commits)
  SUNRPC: Improve ordering of transport processing
  nfsd: deal with revoked delegations appropriately
  svcrdma: Enqueue after setting XPT_CLOSE in completion handlers
  nfsd: use nfs->ns.inum as net ID
  rpc: remove some BUG()s
  svcrdma: Preserve CB send buffer across retransmits
  nfds: avoid gettimeofday for nfssvc_boot time
  fs, nfsd: convert nfs4_file.fi_ref from atomic_t to refcount_t
  fs, nfsd: convert nfs4_cntl_odstate.co_odcount from atomic_t to refcount_t
  fs, nfsd: convert nfs4_stid.sc_count from atomic_t to refcount_t
  lockd: double unregister of inetaddr notifiers
  nfsd4: catch some false session retries
  nfsd4: fix cached replies to solo SEQUENCE compounds
  sunrcp: make function _svc_create_xprt static
  SUNRPC: Fix tracepoint storage issues with svc_recv and svc_rqst_status
  nfsd: use ARRAY_SIZE
  nfsd: give out fewer session slots as limit approaches
  nfsd: increase DRC cache limit
  nfsd: remove unnecessary nofilehandle checks
  nfs_common: convert int to bool
  ...

Pull x86 platform driver updates from Andy Shevchenko:
 "Here is the collected material against Platform Drivers x86 subsystem.
  It's rather bit busy cycle for PDx86, mostly due to Dell SMBIOS driver
  activity

  For this cycle we have quite an update for the Dell SMBIOS driver
  including WMI work to provide an interface for SMBIOS tokens via sysfs
  and WMI support for 2017+ Dell laptop models. SMM dispatcher code is
  split into a separate driver followed by a new WMI dispatcher. The
  latter provides a character device interface to user space.

  The git history also contains a merge of immutable branch from Wolfram
  Sang in order to apply a dependent fix to the Intel CherryTrail
  Battery Management driver.

  Other Intel drivers got a lot of cleanups. The Turbo Boost Max 3.0
  support is added for Intel Skylake.

  Peaq WMI hotkeys driver gets its own maintainer and white list of
  supported models.

  Silead DMI is expanded to support few additional platforms.

  Tablet mode via GMMS ACPI method is added to support some ThinkPad
  tablets.

  new driver:
   - Add driver to force WMI Thunderbolt controller power status

  asus-wmi:
   -  Add lightbar led support

  dell-laptop:
   -  Allocate buffer before rfkill use

  dell-smbios:
   -  fix string overflow
   -  Add filtering support
   -  Introduce dispatcher for SMM calls
   -  Add a sysfs interface for SMBIOS tokens
   -  only run if proper oem string is detected
   -  Prefix class/select with cmd_
   -  Add pr_fmt definition to driver

  dell-smbios-smm:
   -  test for WSMT

  dell-smbios-wmi:
   -  release mutex lock on WMI call failure
   -  introduce userspace interface
   -  Add new WMI dispatcher driver

  dell-smo8800:
   -  remove redundant assignments to byte_data

  dell-wmi:
   -  don't check length returned
   -  clean up wmi descriptor check
   -  increase severity of some failures
   -  Do not match on descriptor GUID modalias
   -  Label driver as handling notifications

  dell-*wmi*:
   -  Relay failed initial probe to dependent drivers

  dell-wmi-descriptor:
   -  check if memory was allocated
   -  split WMI descriptor into it's own driver

  fujitsu-laptop:
   -  Fix radio LED detection
   -  Don't oops when FUJ02E3 is not presnt

  hp_accel:
   -  Add quirk for HP ProBook 440 G4

  hp-wmi:
   -  Fix tablet mode detection for convertibles

  ideapad-laptop:
   -  Add Lenovo Yoga 920-13IKB to no_hw_rfkill dmi list

  intel_cht_int33fe:
   -  Update fusb302 type string, add properties
   -  make a couple of local functions static
   -  Work around BIOS bug on some devices

  intel-hid:
   -  Power button suspend on Dell Latitude 7275

  intel_ips:
   -  Convert timers to use timer_setup()
   -  Remove FSF address from GPL notice
   -  Remove unneeded fields and label
   -  Keep pointer to struct device
   -  Use PCI_VDEVICE() macro
   -  Switch to new PCI IRQ allocation API
   -  Simplify error handling via devres API

  intel_pmc_ipc:
   -  Revert Use MFD framework to create dependent devices
   -  Use MFD framework to create dependent devices
   -  Use spin_lock to protect GCR updates
   -  Use devm_* calls in driver probe function

  intel_punit_ipc:
   -  Fix resource ioremap warning

  intel_telemetry:
   -  Remove useless default in Kconfig
   -  Add needed inclusion
   -  cleanup redundant headers
   -  Fix typos
   -  Fix load failure info

  intel_telemetry_debugfs:
   -  Use standard ARRAY_SIZE() macro

  intel_turbo_max_3:
   -  Add Skylake platform

  intel-wmi-thunderbolt:
   -  Silence error cases

  mlx-platform:
   -  make a couple of structures static

  peaq_wmi:
   -  Fix missing terminating entry for peaq_dmi_table

  peaq-wmi:
   -  Remove unnecessary checks from peaq_wmi_exit
   -  Add DMI check before binding to the WMI interface
   -  Revert Blacklist Lenovo ideapad 700-15ISK
   -  Blacklist Lenovo ideapad 700-15ISK

  silead_dmi:
   -  Add silead, home-button property to some tablets
   -  Add entry for the Digma e200 tablet
   -  Fix GP-electronic T701 entry
   -  Add entry for the Chuwi Hi8 Pro tablet

  sony-laptop:
   -  Drop variable assignment in sony_nc_setup_rfkill()
   -  Fix error handling in sony_nc_setup_rfkill()

  thinkpad_acpi:
   -  Implement tablet mode using GMMS method

  tools/wmi:
   -  add a sample for dell smbios communication over WMI

  wmi:
   -  release mutex on module acquistion failure
   -  create userspace interface for drivers
   -  Don't allow drivers to get each other's GUIDs
   -  Add new method wmidev_evaluate_method
   -  Destroy on cleanup rather than unregister
   -  Cleanup exit routine in reverse order of init
   -  Sort include list"

* tag 'platform-drivers-x86-v4.15-1' of git://git.infradead.org/linux-platform-drivers-x86: (74 commits)
  platform/x86: silead_dmi: Add silead, home-button property to some tablets
  platform/x86: dell-laptop: Allocate buffer before rfkill use
  platform/x86: dell-*wmi*: Relay failed initial probe to dependent drivers
  platform/x86: dell-wmi-descriptor: check if memory was allocated
  platform/x86: Revert intel_pmc_ipc: Use MFD framework to create dependent devices
  platform/x86: dell-smbios-wmi: release mutex lock on WMI call failure
  platform/x86: wmi: release mutex on module acquistion failure
  platform/x86: dell-smbios: fix string overflow
  platform/x86: intel_pmc_ipc: Use MFD framework to create dependent devices
  platform/x86: intel_punit_ipc: Fix resource ioremap warning
  platform/x86: dell-smo8800: remove redundant assignments to byte_data
  platform/x86: hp-wmi: Fix tablet mode detection for convertibles
  platform/x86: intel_ips: Convert timers to use timer_setup()
  platform/x86: sony-laptop: Drop variable assignment in sony_nc_setup_rfkill()
  platform/x86: sony-laptop: Fix error handling in sony_nc_setup_rfkill()
  tools/wmi: add a sample for dell smbios communication over WMI
  platform/x86: dell-smbios-wmi: introduce userspace interface
  platform/x86: wmi: create userspace interface for drivers
  platform/x86: dell-smbios: Add filtering support
  platform/x86: dell-smbios-smm: test for WSMT
  ...

Add "silead,home-button" property to entries for tablets which have
a capacitive home button (typically a windows logo on the front).

This new property is checked for by the new capacitive home button
support in the silead touchscreen driver.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>

Pull sparc updates from David Miller:

 1) Add missing cmpxchg64() for 32-bit sparc.

 2) Timer conversions from Allen Pais and Kees Cook.

 3) vDSO support, from Nagarathnam Muthusamy.

 4) Fix sparc64 huge page table walks based upon bug report by Al Viro,
    from Nitin Gupta.

 5) Optimized fls() for T4 and above, from Vijay Kumar.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc64: Fix page table walk for PUD hugepages
  sparc64: Convert timers to user timer_setup()
  sparc64: convert mdesc_handle.refcnt from atomic_t to refcount_t
  sparc/led: Convert timers to use timer_setup()
  sparc64: Use sparc optimized fls and __fls for T4 and above
  sparc64: SPARC optimized __fls function
  sparc64: SPARC optimized fls function
  sparc64: Define SPARC default __fls function
  sparc64: Define SPARC default fls function
  vDSO for sparc
  sparc32: Add cmpxchg64().
  sbus: char: Move D7S_MINOR to include/linux/miscdevice.h
  sparc: time: Remove unneeded linux/miscdevice.h include
  sparc64: mmu_context: Add missing include files