If the dual-port 5704 is configured as a single-port device with
only one PCI function, it would trigger a BUG() condition in
tg3_find_5704_peer(). This fixes the problem by returning its
own pdev if the peer cannot be found.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix tg3_suspend() and tg3_resume() by clearing and setting the
TG3_FLAG_INIT_COMPLETE flag when appropriate. tg3_set_power_state()
looks at TG3_FLAG_INIT_COMPLETE on the peer device to determine
when to appropriately switch to aux power.  
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The nvram arbitration rules were not strictly followed in a few places
and this could lead to reading corrupted values from the nvram.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Let's put my money where my mouth is.  Smaller code is almost always
faster, if only because a single I$ miss ends up leaving a lot of cycles
to make up for.  And system software - kernels in particular - are known
for taking more cache misses than most other kinds.

On my random config, this made the kernel about 10% smaller, and lmbench
seems to say that it's pretty uniformly faster too. Your milage may vary.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

ERR_SEVERITY item is defined as a 8 bits item in SAL documentation
($B.2.1 rev december 2003), but as an u16 in sal.h.
This has the side effect that current code in mca.c may not call
ia64_sal_clear_state_info() upon receiving corrected platform errors
if there are bits set in the validation byte.  Reported by Xavier Bru.
Signed-off-by: NTony Luck <tony.luck@intel.com>

KOBJECT_UEVENT=n seems to be a common pitfall for udev users in 2.6.14 .

-mm already contains a bigger patch removing this option that is IMHO
too big for being applied now to 2.6.15-rc.

This patch simply allows KOBJECT_UEVENT=n only if EMBEDDED.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Some hardware does not support the PACKET command at all.
Other hardware supports ATAPI, but the driver does something nasty such
as calling BUG() when an ATAPI command is issued.

For these such cases, we mark them with a new flag, ATA_FLAG_NO_ATAPI.

Initial version contributed by Ben Collins.

The drawing function cfbfillrect does not work correctly when access is not
unsigned-long aligned.  It manifests as extra lines of pixels that are not
complete drawn.  Reversing the shift operator solves the problem, so I would
presume that this bug would manifest only on little endian machines.  The
function cfbcopyarea may also have this bug.

Aligned access should present no problems.
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

In slow imageblit, the pixel value is shifted by a certain amount (dependent
on the bpp and endianness) for each iteration.  This is inefficient.  Better
do the shifting once before going into the loop.
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Every framebuffer driver relies on the assumption that the set_par()
function of the driver is called before drawing functions and other
functions dependent on the hardware state are executed.

Whenever you switch from X to a framebuffer console for the very first
time, there is a chance that a broken X system has _not_ set the mode to
KD_GRAPHICS, thus the vt and framebuffer code executes a screen redraw and
several other functions before a set_par() is executed.  This is believed
to be not a bug of linux but a bug of X/xdm.  At least some X releases used
by SuSE and Debian show this behaviour.

There was a 2nd case, but that has been fixed by Antonino Daplas on
10-dec-2005.

This patch allows drivers to set a flag to inform fbcon_switch() that they
prefer a set_par() call on every console switch, working around the
problems caused by the broken X releases.

The flag will be used by the next release of cyblafb and might help other
drivers that assume a hardware state different to the one used by X.

As the default behaviour does not change, this patch should be acceptable
to everybody.
Signed-off-by: NKnut Petersen <Knut_Petersen@t-online.de>
Acked-by: N"Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Avoid calls to fb_pan_display when driver is suspended or not in text mode.
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- Fix fb_pan_display rejecting yoffsets that are valid if panning mode
  is ywrap.

- Add more robust error checking in fb_pan_display specially since this
  function is accessible by userland apps.
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add hooks to save and restore the graphics state.  These hooks are called in
fbcon_blank() when entering/leaving KD_GRAPHICS mode.  This is needed by
savagefb at least so it can cooperate with savage_dri and by cyblafb.

State save/restoration can be full or partial.
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

There is a bug in the complement_mask when you have a 512-character map.
Linux boots to a default 256-character map and most probably your login
profile is loading a 512-character map which results in a bad gpm cursor.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch adds setting our drv->queue = NULL back in deregister_disk.  The
drv->queue is part of our controller struct.  blk_cleanup_queue works only
on the queue in the gendisk struct.
Signed-off-by: NMike Miller <mike.miller@hp.com>
Cc: Jens Axboe <axboe@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

As reported by Keith Mannthey, there are problems in populate_memnodemap()

The bug was that the compute_hash_shift() was returning 31, with incorrect
initialization of memnodemap[]

To correct the bug, we must use (1UL << shift) instead of (1 << shift) to
avoid an integer overflow, and we must check that shift < 64 to avoid an
infinite loop.
Signed-off-by: NEric Dumazet <dada1@cosmosbay.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

On systems that do not support the HPET legacy functions (basically the IBM
x460, but there could be others), in time_init() we accidentally fall into a
PM timer conditional and set the vxtime_hz value to the PM timer's frequency.
We then use this value with the HPET for timekeeping.

This patch (which mimics the behavior in time_init_gtod) corrects the
collision.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When a register set is passed in don't try to fix up the pointer.

Noticed by Al Viro
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

They report all busses as MMCONFIG capable, but it never works for the
internal devices in the CPU's builtin northbridge.

It just probes all func 0 devices on bus 0 (the internal northbridge is
currently always on bus 0) and if they are not accessible using MCFG they are
put into a special fallback bitmap.

On systems where it isn't we assume the BIOS vendor supplied correct MCFG.

Requires the earlier patch for mmconfig type1 fallback
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When there is no entry for a bus in MCFG fall back to type1.  This is
especially important on K8 systems where always some devices can't be accessed
using mmconfig (in particular the builtin northbridge doesn't support it for
its own devices)

Cc: <gregkh@suse.de>
Cc: <jgarzik@pobox.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

It's illegal because it can sleep.

Use a two step lookup scheme instead.  First look up the vm_struct, then
change the direct mapping, then finally unmap it.  That's ok because nobody
can change the particular virtual address range as long as the vm_struct is
still in the global list.

Also added some LinuxDoc documentation to iounmap.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Disabling LAPIC timer isn't sufficient.  In some situations, such as we
enabled NMI watchdog, there is still unexpected interrupt (such as NMI)
invoked in offline CPU.  This also avoids offline CPU receives spurious
interrupt and anything similar.
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Acked-by: N"Seth, Rohit" <rohit.seth@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Otherwise TSC->HPET fallback could see incorrect state and crash later.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Ben noticed that on certain cards we've landed the AGP space on top of
the second aperture instead of after it..  Which messes things up a lot
on those machines.

This just moves the gart further out, a more correct fix is in the works
from Ben for after 2.6.15.
Signed-off-by: NDave Airlie <airlied@linux.ie>
CC: Ben Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

*** Warning: ".wireless_send_event" [net/ieee80211/ieee80211_crypt_tkip.ko] undefined!
Signed-off-by: NOlaf Hering <olh@suse.de>

 net/ieee80211/Kconfig |    2 +-
 1 files changed, 1 insertion(+), 1 deletion(-)
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Get rid of warning in case of race with ring full and lockless
tx on the skge driver. It is possible to be in the transmit
routine with no available slots and already stopped.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Fix incorrect pointer usage on two calls to kunmap_atomic().
This seems to happen a lot, because kunmap() wants the struct page *,
whereas kunmap_atomic() instead wants the mapped virtual address.
Signed-off-by: NMark Lord <liml@rtr.ca>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Nick Piggin points out that a few drivers play games with VM_IO (why?
who knows..) and thus a pfn-remapped area may not have that bit set even
if remap_pfn_range() set it originally.

So make it explicit in get_user_pages() that we don't follow VM_PFNMAP
pages, since pretty much by definition they do not have a "struct page"
associated with them.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>