Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 14 1月, 2019 1 次提交
    • P
      kbuild: Disable LD_DEAD_CODE_DATA_ELIMINATION with ftrace & GCC <= 4.7 · 16fd20aa
      由 Paul Burton 提交于 
      When building using GCC 4.7 or older, -ffunction-sections & the -pg flag
used by ftrace are incompatible. This causes warnings or build failures
(where -Werror applies) such as the following:

  arch/mips/generic/init.c:
    error: -ffunction-sections disabled; it makes profiling impossible

This used to be taken into account by the ordering of calls to cc-option
from within the top-level Makefile, which was introduced by commit
90ad4052 ("kbuild: avoid conflict between -ffunction-sections and
-pg on gcc-4.7"). Unfortunately this was broken when the
CONFIG_LD_DEAD_CODE_DATA_ELIMINATION cc-option check was moved to
Kconfig in commit e85d1d65 ("kbuild: test dead code/data elimination
support in Kconfig"), because the flags used by this check no longer
include -pg.

Fix this by not allowing CONFIG_LD_DEAD_CODE_DATA_ELIMINATION to be
enabled at the same time as ftrace/CONFIG_FUNCTION_TRACER when building
using GCC 4.7 or older.
Signed-off-by: NPaul Burton <paul.burton@mips.com>
Fixes: e85d1d65 ("kbuild: test dead code/data elimination support in Kconfig")
Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
      16fd20aa
  3. 06 1月, 2019 1 次提交
    • M
      jump_label: move 'asm goto' support test to Kconfig · e9666d10
      由 Masahiro Yamada 提交于 
      Currently, CONFIG_JUMP_LABEL just means "I _want_ to use jump label".

The jump label is controlled by HAVE_JUMP_LABEL, which is defined
like this:

  #if defined(CC_HAVE_ASM_GOTO) && defined(CONFIG_JUMP_LABEL)
  # define HAVE_JUMP_LABEL
  #endif

We can improve this by testing 'asm goto' support in Kconfig, then
make JUMP_LABEL depend on CC_HAS_ASM_GOTO.

Ugly #ifdef HAVE_JUMP_LABEL will go away, and CONFIG_JUMP_LABEL will
match to the real kernel capability.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Tested-by: NSedat Dilek <sedat.dilek@gmail.com>
      e9666d10
  5. 15 12月, 2018 1 次提交
  7. 01 12月, 2018 1 次提交
    • J
      psi: make disabling/enabling easier for vendor kernels · e0c27447
      由 Johannes Weiner 提交于 
      Mel Gorman reports a hackbench regression with psi that would prohibit
shipping the suse kernel with it default-enabled, but he'd still like
users to be able to opt in at little to no cost to others.

With the current combination of CONFIG_PSI and the psi_disabled bool set
from the commandline, this is a challenge.  Do the following things to
make it easier:

1. Add a config option CONFIG_PSI_DEFAULT_DISABLED that allows distros
   to enable CONFIG_PSI in their kernel but leave the feature disabled
   unless a user requests it at boot-time.

   To avoid double negatives, rename psi_disabled= to psi=.

2. Make psi_disabled a static branch to eliminate any branch costs
   when the feature is disabled.

In terms of numbers before and after this patch, Mel says:

: The following is a comparision using CONFIG_PSI=n as a baseline against
: your patch and a vanilla kernel
:
:                          4.20.0-rc4             4.20.0-rc4             4.20.0-rc4
:                 kconfigdisable-v1r1                vanilla        psidisable-v1r1
: Amean     1       1.3100 (   0.00%)      1.3923 (  -6.28%)      1.3427 (  -2.49%)
: Amean     3       3.8860 (   0.00%)      4.1230 *  -6.10%*      3.8860 (  -0.00%)
: Amean     5       6.8847 (   0.00%)      8.0390 * -16.77%*      6.7727 (   1.63%)
: Amean     7       9.9310 (   0.00%)     10.8367 *  -9.12%*      9.9910 (  -0.60%)
: Amean     12     16.6577 (   0.00%)     18.2363 *  -9.48%*     17.1083 (  -2.71%)
: Amean     18     26.5133 (   0.00%)     27.8833 *  -5.17%*     25.7663 (   2.82%)
: Amean     24     34.3003 (   0.00%)     34.6830 (  -1.12%)     32.0450 (   6.58%)
: Amean     30     40.0063 (   0.00%)     40.5800 (  -1.43%)     41.5087 (  -3.76%)
: Amean     32     40.1407 (   0.00%)     41.2273 (  -2.71%)     39.9417 (   0.50%)
:
: It's showing that the vanilla kernel takes a hit (as the bisection
: indicated it would) and that disabling PSI by default is reasonably
: close in terms of performance for this particular workload on this
: particular machine so;

Link: http://lkml.kernel.org/r/20181127165329.GA29728@cmpxchg.orgSigned-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Tested-by: NMel Gorman <mgorman@techsingularity.net>
Reported-by: NMel Gorman <mgorman@techsingularity.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      e0c27447
  9. 20 11月, 2018 1 次提交
  11. 27 10月, 2018 2 次提交
  13. 02 10月, 2018 1 次提交
  15. 24 8月, 2018 1 次提交
  17. 23 8月, 2018 2 次提交
  19. 18 8月, 2018 1 次提交
  21. 09 8月, 2018 1 次提交
  23. 02 8月, 2018 3 次提交
  25. 18 7月, 2018 1 次提交
    • L
      kbuild: Add build salt to the kernel and modules · 9afb719e
      由 Laura Abbott 提交于 
      In Fedora, the debug information is packaged separately (foo-debuginfo) and
can be installed separately. There's been a long standing issue where only
one version of a debuginfo info package can be installed at a time. There's
been an effort for Fedora for parallel debuginfo to rectify this problem.

Part of the requirement to allow parallel debuginfo to work is that build ids
are unique between builds. The existing upstream rpm implementation ensures
this by re-calculating the build-id using the version and release as a
seed. This doesn't work 100% for the kernel because of the vDSO which is
its own binary and doesn't get updated when embedded.

Fix this by adding some data in an ELF note for both the kernel and modules.
The data is controlled via a Kconfig option so distributions can set it
to an appropriate value to ensure uniqueness between builds.
Suggested-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NLaura Abbott <labbott@redhat.com>
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
      9afb719e
  27. 28 6月, 2018 1 次提交
  29. 25 6月, 2018 1 次提交
  31. 14 6月, 2018 1 次提交
    • C
      dma-mapping: move all DMA mapping code to kernel/dma · cf65a0f6
      由 Christoph Hellwig 提交于 
      Currently the code is split over various files with dma- prefixes in the
lib/ and drives/base directories, and the number of files keeps growing.
Move them into a single directory to keep the code together and remove
the file name prefixes.  To match the irq infrastructure this directory
is placed under the kernel/ directory.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
      cf65a0f6
  33. 08 6月, 2018 2 次提交
  35. 06 6月, 2018 1 次提交
    • M
      rseq: Introduce restartable sequences system call · d7822b1e
      由 Mathieu Desnoyers 提交于 
      Expose a new system call allowing each thread to register one userspace
memory area to be used as an ABI between kernel and user-space for two
purposes: user-space restartable sequences and quick access to read the
current CPU number value from user-space.

* Restartable sequences (per-cpu atomics)

Restartables sequences allow user-space to perform update operations on
per-cpu data without requiring heavy-weight atomic operations.

The restartable critical sections (percpu atomics) work has been started
by Paul Turner and Andrew Hunter. It lets the kernel handle restart of
critical sections. [1] [2] The re-implementation proposed here brings a
few simplifications to the ABI which facilitates porting to other
architectures and speeds up the user-space fast path.

Here are benchmarks of various rseq use-cases.

Test hardware:

arm32: ARMv7 Processor rev 4 (v7l) "Cubietruck", 2-core
x86-64: Intel E5-2630 v3@2.40GHz, 16-core, hyperthreading

The following benchmarks were all performed on a single thread.

* Per-CPU statistic counter increment

                getcpu+atomic (ns/op)    rseq (ns/op)    speedup
arm32:                344.0                 31.4          11.0
x86-64:                15.3                  2.0           7.7

* LTTng-UST: write event 32-bit header, 32-bit payload into tracer
             per-cpu buffer

                getcpu+atomic (ns/op)    rseq (ns/op)    speedup
arm32:               2502.0                 2250.0         1.1
x86-64:               117.4                   98.0         1.2

* liburcu percpu: lock-unlock pair, dereference, read/compare word

                getcpu+atomic (ns/op)    rseq (ns/op)    speedup
arm32:                751.0                 128.5          5.8
x86-64:                53.4                  28.6          1.9

* jemalloc memory allocator adapted to use rseq

Using rseq with per-cpu memory pools in jemalloc at Facebook (based on
rseq 2016 implementation):

The production workload response-time has 1-2% gain avg. latency, and
the P99 overall latency drops by 2-3%.

* Reading the current CPU number

Speeding up reading the current CPU number on which the caller thread is
running is done by keeping the current CPU number up do date within the
cpu_id field of the memory area registered by the thread. This is done
by making scheduler preemption set the TIF_NOTIFY_RESUME flag on the
current thread. Upon return to user-space, a notify-resume handler
updates the current CPU value within the registered user-space memory
area. User-space can then read the current CPU number directly from
memory.

Keeping the current cpu id in a memory area shared between kernel and
user-space is an improvement over current mechanisms available to read
the current CPU number, which has the following benefits over
alternative approaches:

- 35x speedup on ARM vs system call through glibc
- 20x speedup on x86 compared to calling glibc, which calls vdso
  executing a "lsl" instruction,
- 14x speedup on x86 compared to inlined "lsl" instruction,
- Unlike vdso approaches, this cpu_id value can be read from an inline
  assembly, which makes it a useful building block for restartable
  sequences.
- The approach of reading the cpu id through memory mapping shared
  between kernel and user-space is portable (e.g. ARM), which is not the
  case for the lsl-based x86 vdso.

On x86, yet another possible approach would be to use the gs segment
selector to point to user-space per-cpu data. This approach performs
similarly to the cpu id cache, but it has two disadvantages: it is
not portable, and it is incompatible with existing applications already
using the gs segment selector for other purposes.

Benchmarking various approaches for reading the current CPU number:

ARMv7 Processor rev 4 (v7l)
Machine model: Cubietruck
- Baseline (empty loop):                                    8.4 ns
- Read CPU from rseq cpu_id:                               16.7 ns
- Read CPU from rseq cpu_id (lazy register):               19.8 ns
- glibc 2.19-0ubuntu6.6 getcpu:                           301.8 ns
- getcpu system call:                                     234.9 ns

x86-64 Intel(R) Xeon(R) CPU E5-2630 v3 @ 2.40GHz:
- Baseline (empty loop):                                    0.8 ns
- Read CPU from rseq cpu_id:                                0.8 ns
- Read CPU from rseq cpu_id (lazy register):                0.8 ns
- Read using gs segment selector:                           0.8 ns
- "lsl" inline assembly:                                   13.0 ns
- glibc 2.19-0ubuntu6 getcpu:                              16.6 ns
- getcpu system call:                                      53.9 ns

- Speed (benchmark taken on v8 of patchset)

Running 10 runs of hackbench -l 100000 seems to indicate, contrary to
expectations, that enabling CONFIG_RSEQ slightly accelerates the
scheduler:

Configuration: 2 sockets * 8-core Intel(R) Xeon(R) CPU E5-2630 v3 @
2.40GHz (directly on hardware, hyperthreading disabled in BIOS, energy
saving disabled in BIOS, turboboost disabled in BIOS, cpuidle.off=1
kernel parameter), with a Linux v4.6 defconfig+localyesconfig,
restartable sequences series applied.

* CONFIG_RSEQ=n

avg.:      41.37 s
std.dev.:   0.36 s

* CONFIG_RSEQ=y

avg.:      40.46 s
std.dev.:   0.33 s

- Size

On x86-64, between CONFIG_RSEQ=n/y, the text size increase of vmlinux is
567 bytes, and the data size increase of vmlinux is 5696 bytes.

[1] https://lwn.net/Articles/650333/
[2] http://www.linuxplumbersconf.org/2013/ocw/system/presentations/1695/original/LPC%20-%20PerCpu%20Atomics.pdfSigned-off-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Watson <davejwatson@fb.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Chris Lameter <cl@linux.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Andrew Hunter <ahh@google.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ben Maurer <bmaurer@fb.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: linux-api@vger.kernel.org
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20151027235635.16059.11630.stgit@pjt-glaptop.roam.corp.google.com
Link: http://lkml.kernel.org/r/20150624222609.6116.86035.stgit@kitami.mtv.corp.google.com
Link: https://lkml.kernel.org/r/20180602124408.8430-3-mathieu.desnoyers@efficios.com
      d7822b1e
  37. 29 5月, 2018 3 次提交
    • M
      kconfig: replace $(UNAME_RELEASE) with function call · 2972666a
      由 Masahiro Yamada 提交于 
      Now that 'shell' function is supported, this can be self-contained in
Kconfig.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NKees Cook <keescook@chromium.org>
Reviewed-by: NUlf Magnusson <ulfalizer@gmail.com>
      2972666a
    • M
      kconfig: reference environment variables directly and remove 'option env=' · 104daea1
      由 Masahiro Yamada 提交于 
      To get access to environment variables, Kconfig needs to define a
symbol using "option env=" syntax.  It is tedious to add a symbol entry
for each environment variable given that we need to define much more
such as 'CC', 'AS', 'srctree' etc. to evaluate the compiler capability
in Kconfig.

Adding '$' for symbol references is grammatically inconsistent.
Looking at the code, the symbols prefixed with 'S' are expanded by:
 - conf_expand_value()
   This is used to expand 'arch/$ARCH/defconfig' and 'defconfig_list'
 - sym_expand_string_value()
   This is used to expand strings in 'source' and 'mainmenu'

All of them are fixed values independent of user configuration.  So,
they can be changed into the direct expansion instead of symbols.

This change makes the code much cleaner.  The bounce symbols 'SRCARCH',
'ARCH', 'SUBARCH', 'KERNELVERSION' are gone.

sym_init() hard-coding 'UNAME_RELEASE' is also gone.  'UNAME_RELEASE'
should be replaced with an environment variable.

ARCH_DEFCONFIG is a normal symbol, so it should be simply referenced
without '$' prefix.

The new syntax is addicted by Make.  The variable reference needs
parentheses, like $(FOO), but you can omit them for single-letter
variables, like $F.  Yet, in Makefiles, people tend to use the
parenthetical form for consistency / clarification.

At this moment, only the environment variable is supported, but I will
extend the concept of 'variable' later on.

The variables are expanded in the lexer so we can simplify the token
handling on the parser side.

For example, the following code works.

[Example code]

  config MY_TOOLCHAIN_LIST
          string
          default "My tools: CC=$(CC), AS=$(AS), CPP=$(CPP)"

[Result]

  $ make -s alldefconfig && tail -n 1 .config
  CONFIG_MY_TOOLCHAIN_LIST="My tools: CC=gcc, AS=as, CPP=gcc -E"
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NKees Cook <keescook@chromium.org>
      104daea1
    • M
      kbuild: remove CONFIG_CROSS_COMPILE support · f1089c92
      由 Masahiro Yamada 提交于 
      Kbuild provides a couple of ways to specify CROSS_COMPILE:

[1] Command line
[2] Environment
[3] arch/*/Makefile (only some architectures)
[4] CONFIG_CROSS_COMPILE

[4] is problematic for the compiler capability tests in Kconfig.
CONFIG_CROSS_COMPILE allows users to change the compiler prefix from
'make menuconfig', etc.  It means, the compiler options would have
to be all re-calculated everytime CONFIG_CROSS_COMPILE is changed.

To avoid complexity and performance issues, I'd like to evaluate
the shell commands statically, i.e. only parsing Kconfig files.

I guess the majority is [1] or [2].  Currently, there are only
5 defconfig files that specify CONFIG_CROSS_COMPILE.
  arch/arm/configs/lpc18xx_defconfig
  arch/hexagon/configs/comet_defconfig
  arch/nds32/configs/defconfig
  arch/openrisc/configs/or1ksim_defconfig
  arch/openrisc/configs/simple_smp_defconfig
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NKees Cook <keescook@chromium.org>
      f1089c92
  39. 18 5月, 2018 1 次提交
  41. 17 5月, 2018 1 次提交
  43. 15 5月, 2018 1 次提交
    • S
      bpf: enable stackmap with build_id in nmi context · bae77c5e
      由 Song Liu 提交于 
      Currently, we cannot parse build_id in nmi context because of
up_read(&current->mm->mmap_sem), this makes stackmap with build_id
less useful. This patch enables parsing build_id in nmi by putting
the up_read() call in irq_work. To avoid memory allocation in nmi
context, we use per cpu variable for the irq_work. As a result, only
one irq_work per cpu is allowed. If the irq_work is in-use, we
fallback to only report ips.

Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: NSong Liu <songliubraving@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
      bae77c5e
  45. 05 4月, 2018 2 次提交
    • D
      syscalls/core: Prepare CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y for compat syscalls · 7303e30e
      由 Dominik Brodowski 提交于 
      It may be useful for an architecture to override the definitions of the
COMPAT_SYSCALL_DEFINE0() and __COMPAT_SYSCALL_DEFINEx() macros in
<linux/compat.h>, in particular to use a different calling convention
for syscalls. This patch provides a mechanism to do so, based on the
previously introduced CONFIG_ARCH_HAS_SYSCALL_WRAPPER. If it is enabled,
<asm/sycall_wrapper.h> is included in <linux/compat.h> and may be used
to define the macros mentioned above. Moreover, as the syscall calling
convention may be different if CONFIG_ARCH_HAS_SYSCALL_WRAPPER is set,
the compat syscall function prototypes in <linux/compat.h> are #ifndef'd
out in that case.

As some of the syscalls and/or compat syscalls may not be present,
the COND_SYSCALL() and COND_SYSCALL_COMPAT() macros in kernel/sys_ni.c
as well as the SYS_NI() and COMPAT_SYS_NI() macros in
kernel/time/posix-stubs.c can be re-defined in <asm/syscall_wrapper.h> iff
CONFIG_ARCH_HAS_SYSCALL_WRAPPER is enabled.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180405095307.3730-5-linux@dominikbrodowski.netSigned-off-by: NIngo Molnar <mingo@kernel.org>
      7303e30e
    • D
      syscalls/core: Introduce CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y · 1bd21c6c
      由 Dominik Brodowski 提交于 
      It may be useful for an architecture to override the definitions of the
SYSCALL_DEFINE0() and __SYSCALL_DEFINEx() macros in <linux/syscalls.h>,
in particular to use a different calling convention for syscalls.

This patch provides a mechanism to do so: It introduces
CONFIG_ARCH_HAS_SYSCALL_WRAPPER. If it is enabled, <asm/sycall_wrapper.h>
is included in <linux/syscalls.h> and may be used to define the macros
mentioned above. Moreover, as the syscall calling convention may be
different if CONFIG_ARCH_HAS_SYSCALL_WRAPPER is set, the syscall function
prototypes in <linux/syscalls.h> are #ifndef'd out in that case.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180405095307.3730-3-linux@dominikbrodowski.netSigned-off-by: NIngo Molnar <mingo@kernel.org>
      1bd21c6c
  47. 26 3月, 2018 1 次提交
  49. 10 3月, 2018 1 次提交
  51. 22 2月, 2018 1 次提交
    • W
      pc104: Add EXPERT dependency for PC104 Kconfig option · 424529fb
      由 William Breathitt Gray 提交于 
      PC/104 device driver Kconfig options previously had an implicit EXPERT
dependency by way of an explicit ISA_BUS_API dependency. Now that these
driver Kconfig options select ISA_BUS_API rather than depend on it, the
PC104 Kconfig option should have an explicit EXPERT dependency.

The PC/104 form factor and bus architecture are common in embedded
and specialized systems, but uncommon in typical desktop setups. For
this reason, it is best to mask these devices and configurations via the
EXPERT Kconfig option because the majority of users will never need to
concern themselves with PC/104.
Signed-off-by: NWilliam Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
      424529fb
  53. 06 2月, 2018 3 次提交
    • M
      membarrier: Provide core serializing command, *_SYNC_CORE · 70216e18
      由 Mathieu Desnoyers 提交于 
      Provide core serializing membarrier command to support memory reclaim
by JIT.

Each architecture needs to explicitly opt into that support by
documenting in their architecture code how they provide the core
serializing instructions required when returning from the membarrier
IPI, and after the scheduler has updated the curr->mm pointer (before
going back to user-space). They should then select
ARCH_HAS_MEMBARRIER_SYNC_CORE to enable support for that command on
their architecture.

Architectures selecting this feature need to either document that
they issue core serializing instructions when returning to user-space,
or implement their architecture-specific sync_core_before_usermode().
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrea Parri <parri.andrea@gmail.com>
Cc: Andrew Hunter <ahh@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Avi Kivity <avi@scylladb.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Dave Watson <davejwatson@fb.com>
Cc: David Sehr <sehr@google.com>
Cc: Greg Hackmann <ghackmann@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Maged Michael <maged.michael@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-api@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Link: http://lkml.kernel.org/r/20180129202020.8515-9-mathieu.desnoyers@efficios.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      70216e18
    • M
      locking: Introduce sync_core_before_usermode() · e61938a9
      由 Mathieu Desnoyers 提交于 
      Introduce an architecture function that ensures the current CPU
issues a core serializing instruction before returning to usermode.

This is needed for the membarrier "sync_core" command.

Architectures defining the sync_core_before_usermode() static inline
need to select ARCH_HAS_SYNC_CORE_BEFORE_USERMODE.
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrea Parri <parri.andrea@gmail.com>
Cc: Andrew Hunter <ahh@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Avi Kivity <avi@scylladb.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Dave Watson <davejwatson@fb.com>
Cc: David Sehr <sehr@google.com>
Cc: Greg Hackmann <ghackmann@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Maged Michael <maged.michael@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-api@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Link: http://lkml.kernel.org/r/20180129202020.8515-7-mathieu.desnoyers@efficios.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      e61938a9
    • M
      powerpc, membarrier: Skip memory barrier in switch_mm() · 3ccfebed
      由 Mathieu Desnoyers 提交于 
      Allow PowerPC to skip the full memory barrier in switch_mm(), and
only issue the barrier when scheduling into a task belonging to a
process that has registered to use expedited private.

Threads targeting the same VM but which belong to different thread
groups is a tricky case. It has a few consequences:

It turns out that we cannot rely on get_nr_threads(p) to count the
number of threads using a VM. We can use
(atomic_read(&mm->mm_users) == 1 && get_nr_threads(p) == 1)
instead to skip the synchronize_sched() for cases where the VM only has
a single user, and that user only has a single thread.

It also turns out that we cannot use for_each_thread() to set
thread flags in all threads using a VM, as it only iterates on the
thread group.

Therefore, test the membarrier state variable directly rather than
relying on thread flags. This means
membarrier_register_private_expedited() needs to set the
MEMBARRIER_STATE_PRIVATE_EXPEDITED flag, issue synchronize_sched(), and
only then set MEMBARRIER_STATE_PRIVATE_EXPEDITED_READY which allows
private expedited membarrier commands to succeed.
membarrier_arch_switch_mm() now tests for the
MEMBARRIER_STATE_PRIVATE_EXPEDITED flag.
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andrea Parri <parri.andrea@gmail.com>
Cc: Andrew Hunter <ahh@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Avi Kivity <avi@scylladb.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Dave Watson <davejwatson@fb.com>
Cc: David Sehr <sehr@google.com>
Cc: Greg Hackmann <ghackmann@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Maged Michael <maged.michael@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-api@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/20180129202020.8515-3-mathieu.desnoyers@efficios.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      3ccfebed
  55. 10 1月, 2018 1 次提交
    • A
      bpf: introduce BPF_JIT_ALWAYS_ON config · 290af866
      由 Alexei Starovoitov 提交于 
      The BPF interpreter has been used as part of the spectre 2 attack CVE-2017-5715.

A quote from goolge project zero blog:
"At this point, it would normally be necessary to locate gadgets in
the host kernel code that can be used to actually leak data by reading
from an attacker-controlled location, shifting and masking the result
appropriately and then using the result of that as offset to an
attacker-controlled address for a load. But piecing gadgets together
and figuring out which ones work in a speculation context seems annoying.
So instead, we decided to use the eBPF interpreter, which is built into
the host kernel - while there is no legitimate way to invoke it from inside
a VM, the presence of the code in the host kernel's text section is sufficient
to make it usable for the attack, just like with ordinary ROP gadgets."

To make attacker job harder introduce BPF_JIT_ALWAYS_ON config
option that removes interpreter from the kernel in favor of JIT-only mode.
So far eBPF JIT is supported by:
x64, arm64, arm32, sparc64, s390, powerpc64, mips64

The start of JITed program is randomized and code page is marked as read-only.
In addition "constant blinding" can be turned on with net.core.bpf_jit_harden

v2->v3:
- move __bpf_prog_ret0 under ifdef (Daniel)

v1->v2:
- fix init order, test_bpf and cBPF (Daniel's feedback)
- fix offloaded bpf (Jakub's feedback)
- add 'return 0' dummy in case something can invoke prog->bpf_func
- retarget bpf tree. For bpf-next the patch would need one extra hunk.
  It will be sent when the trees are merged back to net-next

Considered doing:
  int bpf_jit_enable __read_mostly = BPF_EBPF_JIT_DEFAULT;
but it seems better to land the patch as-is and in bpf-next remove
bpf_jit_enable global variable from all JITs, consolidate in one place
and remove this jit_init() function.
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
      290af866
  57. 09 1月, 2018 1 次提交
  59. 18 12月, 2017 1 次提交
    • F
      sched/isolation: Enable CONFIG_CPU_ISOLATION=y by default · 2c43838c
      由 Frederic Weisbecker 提交于 
      The "isolcpus=" boot parameter support was always built-in before we
moved the related code under CONFIG_CPU_ISOLATION. Having it disabled by
default is very confusing for people accustomed to use this parameter.

So enable it by dafault to keep the previous behaviour but keep it
optable for those who want to tinify their kernels.
Signed-off-by: NFrederic Weisbecker <frederic@kernel.org>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wanpeng Li <kernellwp@gmail.com>
Cc: kernel test robot <xiaolong.ye@intel.com>
Link: http://lkml.kernel.org/r/1513275507-29200-3-git-send-email-frederic@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
      2c43838c