1. 24 10月, 2013 9 次提交
  2. 16 10月, 2013 4 次提交
    • T
      of/irq: Pass trigger type in IRQ resource flags · 4a43d686
      Tomasz Figa 提交于
      Some drivers might rely on availability of trigger flags in IRQ
      resource, for example to configure the hardware for particular interrupt
      type. However current code creating IRQ resources from data in device
      tree does not configure trigger flags in resulting resources.
      
      This patch tries to solve the problem, based on the fact that
      irq_of_parse_and_map() configures the trigger based on DT interrupt
      specifier and IRQD_TRIGGER_* flags are consistent with IORESOURCE_IRQ_*,
      and we can get correct trigger flags by calling irqd_get_trigger_type()
      after mapping the interrupt.
      Signed-off-by: NTomasz Figa <tomasz.figa@gmail.com>
      [grant.likely: Merged the two assignments to r->flags]
      Signed-off-by: NGrant Likely <grant.likely@linaro.org>
      4a43d686
    • G
      of: Fix dereferencing node name in debug output to be safe · 8804827b
      Grant Likely 提交于
      Several locations in the of_address and of_irq code dereference the
      full_name parameter from a device_node pointer without checking if the
      pointer is valid.  This patch switches to use of_node_full_name() which
      always checks the pointer.
      Signed-off-by: NGrant Likely <grant.likely@linaro.org>
      8804827b
    • G
      of: Fix iteration bug over CPU reg properties · f3cea45a
      Grant Likely 提交于
      The size of each hwid in a cpu nodes 'reg' property is defined by the
      parents #address-cells property in the normal way. The cpu parsing code
      has a bug where it will overrun the end of the property if
      address-cells is greater than one. This commit fixes the problem by
      adjusting the array size by the number of address cells. It also makes
      sure address-cells isn't zero for that would cause an infinite loop.
      
      v2: bail if #address-cells is zero instead of forcing to
          OF_ROOT_NODE_ADDR_CELLS_DEFAULT. Forcing it will cause the reg
          property to be parsed incorrectly.
      Signed-off-by: NGrant Likely <grant.likely@linaro.org>
      Cc: Rob Herring <rob.herring@calxeda.com>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      f3cea45a
    • D
      of: Make cpu node handling more portable. · d1cb9d1a
      David Miller 提交于
      Use for_each_node_by_type() to iterate all cpu nodes in the
      system.
      
      Provide and overridable function arch_find_n_match_cpu_physical_id,
      which sees if the given device node matches 'cpu' and if so sets
      '*thread' when non-NULL to the cpu thread number within the core.
      
      The default implementation behaves the same as the existing code.
      
      Add a sparc64 implementation.
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      Tested-by: NSudeep KarkadaNagesha <Sudeep.KarkadaNagesha@arm.com>
      Signed-off-by: NGrant Likely <grant.likely@linaro.org>
      d1cb9d1a
  3. 14 10月, 2013 11 次提交
    • G
      of: fix unnecessary warning on missing /cpus node · 444c91e5
      Grant Likely 提交于
      Not all DT platforms have all the cpus collected under a /cpus node.
      That just happens to be a details of FDT, ePAPR and PowerPC platforms.
      Sparc does something different, but unfortunately the current code
      complains with a warning if /cpus isn't there. This became a problem
      with commit f86e4718, "driver/core cpu: initialize of_node in cpu's
      device structure", which caused the function to get called for all
      architectures.
      
      This commit is a temporary fix to fail silently if the cpus node isn't
      present. A proper fix will come later to allow arch code to provide a
      custom mechanism for decoding the CPU hwid if the 'reg' property isn't
      appropriate.
      Signed-off-by: NGrant Likely <grant.likely@linaro.org>
      Cc: David Miller <davem@davemloft.net>
      Cc: Sudeep KarkadaNagesha <Sudeep.KarkadaNagesha@arm.com>
      Cc: Rob Herring <rob.herring@calxeda.com>
      444c91e5
    • L
      Linux 3.12-rc5 · 61e6cfa8
      Linus Torvalds 提交于
      61e6cfa8
    • L
      Merge git://www.linux-watchdog.org/linux-watchdog · 73cac03d
      Linus Torvalds 提交于
      Pull watchdog fixes from Wim Van Sebroeck:
       "This will fix a deadlock on the ts72xx_wdt driver, fix bitmasks in the
        kempld_wdt driver and fix a section mismatch in the sunxi_wdt driver"
      
      * git://www.linux-watchdog.org/linux-watchdog:
        watchdog: sunxi: Fix section mismatch
        watchdog: kempld_wdt: Fix bit mask definition
        watchdog: ts72xx_wdt: locking bug in ioctl
      73cac03d
    • M
      watchdog: sunxi: Fix section mismatch · 1d5898b4
      Maxime Ripard 提交于
      This driver has a section mismatch, for probe and remove functions,
      leading to the following warning during the compilation.
      
      WARNING: drivers/watchdog/built-in.o(.data+0x24): Section mismatch in
      reference from the variable sunxi_wdt_driver to the function
      .init.text:sunxi_wdt_probe()
      The variable sunxi_wdt_driver references
      the function __init sunxi_wdt_probe()
      Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
      Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
      Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
      1d5898b4
    • J
      watchdog: kempld_wdt: Fix bit mask definition · 4c4e4566
      Jingoo Han 提交于
      STAGE_CFG bits are defined as [5:4] bits. However, '(((x) & 0x30) << 4)'
      handles [9:8] bits. Thus, it should be fixed in order to handle
      [5:4] bits.
      Signed-off-by: NJingoo Han <jg1.han@samsung.com>
      Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
      Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
      4c4e4566
    • D
      watchdog: ts72xx_wdt: locking bug in ioctl · 8612ed0d
      Dan Carpenter 提交于
      Calling the WDIOC_GETSTATUS & WDIOC_GETBOOTSTATUS and twice will cause a
      interruptible deadlock.
      Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
      Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
      Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
      8612ed0d
    • L
      Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc · 3552570a
      Linus Torvalds 提交于
      Pull ARM SoC fixes from Olof Johansson:
       "A small batch of fixes this week, mostly OMAP related.  Nothing stands
        out as particularly controversial.
      
        Also a fix for a 3.12-rc1 timer regression for Exynos platforms,
        including the Chromebooks"
      
      * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
        ARM: exynos: dts: Update 5250 arch timer node with clock frequency
        ARM: OMAP2: RX-51: Add missing max_current to rx51_lp5523_led_config
        ARM: mach-omap2: board-generic: fix undefined symbol
        ARM: dts: Fix pinctrl mask for omap3
        ARM: OMAP3: Fix hardware detection for omap3630 when booted with device tree
        ARM: OMAP2: gpmc-onenand: fix sync mode setup with DT
      3552570a
    • Y
      ARM: exynos: dts: Update 5250 arch timer node with clock frequency · 4d594dd3
      Yuvaraj Kumar C D 提交于
      Without the "clock-frequency" property in arch timer node, could able
      to see the below crash dump.
      
      [<c0014e28>] (unwind_backtrace+0x0/0xf4) from [<c0011808>] (show_stack+0x10/0x14)
      [<c0011808>] (show_stack+0x10/0x14) from [<c036ac1c>] (dump_stack+0x7c/0xb0)
      [<c036ac1c>] (dump_stack+0x7c/0xb0) from [<c01ab760>] (Ldiv0_64+0x8/0x18)
      [<c01ab760>] (Ldiv0_64+0x8/0x18) from [<c0062f60>] (clockevents_config.part.2+0x1c/0x74)
      [<c0062f60>] (clockevents_config.part.2+0x1c/0x74) from [<c0062fd8>] (clockevents_config_and_register+0x20/0x2c)
      [<c0062fd8>] (clockevents_config_and_register+0x20/0x2c) from [<c02b8e8c>] (arch_timer_setup+0xa8/0x134)
      [<c02b8e8c>] (arch_timer_setup+0xa8/0x134) from [<c04b47b4>] (arch_timer_init+0x1f4/0x24c)
      [<c04b47b4>] (arch_timer_init+0x1f4/0x24c) from [<c04b40d8>] (clocksource_of_init+0x34/0x58)
      [<c04b40d8>] (clocksource_of_init+0x34/0x58) from [<c049ed8c>] (time_init+0x20/0x2c)
      [<c049ed8c>] (time_init+0x20/0x2c) from [<c049b95c>] (start_kernel+0x1e0/0x39c)
      
      THis is because the Exynos u-boot, for example on the Chromebooks, doesn't set
      up the CNTFRQ register as expected by arch_timer. Instead, we have to specify
      the frequency in the device tree like this.
      Signed-off-by: NYuvaraj Kumar C D <yuvaraj.cd@samsung.com>
      [olof: Changed subject, added comment, elaborated on commit message]
      Signed-off-by: NOlof Johansson <olof@lixom.net>
      4d594dd3
    • O
      Merge tag 'fixes-against-v3.12-rc3-take2' of... · 98ead6e0
      Olof Johansson 提交于
      Merge tag 'fixes-against-v3.12-rc3-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
      
      From Tony Lindgren:
      
      Few fixes for omap3 related hangs and errors that people have
      noticed now that people are actually using the device tree
      based booting for omap3.
      
      Also one regression fix for timer compile for dra7xx when
      omap5 is not selected, and a LED regression fix for n900.
      
      * tag 'fixes-against-v3.12-rc3-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
        ARM: OMAP2: RX-51: Add missing max_current to rx51_lp5523_led_config
        ARM: mach-omap2: board-generic: fix undefined symbol
        ARM: dts: Fix pinctrl mask for omap3
        ARM: OMAP3: Fix hardware detection for omap3630 when booted with device tree
        ARM: OMAP2: gpmc-onenand: fix sync mode setup with DT
      Signed-off-by: NOlof Johansson <olof@lixom.net>
      98ead6e0
    • L
      Merge branch 'parisc-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux · 2d4712b7
      Linus Torvalds 提交于
      Pull parisc fixes from Helge Deller:
       "This patchset includes a bugfix to prevent a kernel crash when memory
        in page zero is accessed by the kernel itself, e.g.  via
        probe_kernel_read().
      
        Furthermore we now export flush_cache_page() which is needed
        (indirectly) by the lustre filesystem.  The other patches remove
        unused functions and optimizes the page fault handler to only evaluate
        variables if needed, which again protects against possible kernel
        crashes"
      
      * 'parisc-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
        parisc: let probe_kernel_read() capture access to page zero
        parisc: optimize variable initialization in do_page_fault
        parisc: fix interruption handler to respect pagefault_disable()
        parisc: mark parisc_terminate() noreturn and cold.
        parisc: remove unused syscall_ipi() function.
        parisc: kill SMP single function call interrupt
        parisc: Export flush_cache_page() (needed by lustre)
      2d4712b7
    • L
      Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dma · 75c53188
      Linus Torvalds 提交于
      Pull slave-dmaengine fixes from Vinod Koul:
       "Another week, time to send another fixes request taking time out of
        extended weekend for the festivities in this part of the world.
      
        We have two fixes from Sergei for rcar driver and one fixing memory
        leak of edma driver by Geyslan"
      
      * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
        dma: edma.c: remove edma_desc leakage
        rcar-hpbdma: add parameter to set_slave() method
        rcar-hpbdma: remove shdma_free_irq() calls
      75c53188
  4. 13 10月, 2013 16 次提交