Also remove the SLAB_RECLAIM_ACCOUNT flag from the system zone kmem
cache.  This slab tends to be fairly static, so it shouldn't be marked
as likely to have free pages that can be reclaimed.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Use the search_dirblock() in ext4_dx_find_entry().  It makes the code
easier to read, and it takes advantage of common code.  It also saves
100 bytes or so of text space.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Cc: Brad Spengler <spender@grsecurity.net>

If the first block of htree directory is missing '.' or '..' but is
otherwise a valid directory, and we do a lookup for '.' or '..', it's
possible to dereference an uninitialized memory pointer in
ext4_htree_next_block().

We avoid this by moving the special case from ext4_dx_find_entry() to
ext4_find_entry(); this also means we can optimize ext4_find_entry()
slightly when NFS looks up "..".

Thanks to Brad Spengler for pointing a Clang warning that led me to
look more closely at this code.  The warning was harmless, but it was
useful in pointing out code that was too ugly to live.  This warning was
also reported by Roman Borisov.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Cc: Brad Spengler <spender@grsecurity.net>

Not that these take up a lot of room, but the structure is long enough
as it is, and there's no need to confuse people with these various
undocumented & unused structure members...
Signed-off-by: NEric Sandeen <sandeen@redaht.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

By queuing the io end on the unwritten workqueue before adding it
to our inode's list of completed IOs, I think we run the risk
of the work getting completed, and the IO freed, before we try
to add it to the inode's i_completed_io_list.

It should be safe to add it to the inode's list of completed
IOs, and -then- queue it for completion, I think.

Thanks to Dave Chinner for pointing out the race.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Reviewed-by: NJiaying Zhang <jiayingz@google.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Many tracepoints were populating an ext4_allocation_context
to pass in, but this requires a slab allocation even when
tracepoints are off.  In fact, 4 of 5 of these allocations
were only for tracing.  In addition, we were only using a
small fraction of the 144 bytes of this structure for this
purpose.

We can do away with all these alloc/frees of the ac and
simply pass in the bits we care about, instead.

I tested this by turning on tracing and running through
xfstests on x86_64.  I did not actually do anything with
the trace output, however.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Our QA reported an oops in the ext4_mb_release_group_pa tracing,
and Josef Bacik pointed out that it was because we may have a
non-null but uninitialized ac_inode in the allocation context.

I can reproduce it when running xfstests with ext4 tracepoints on, 
on a CONFIG_SLAB_DEBUG kernel.

We call trace_ext4_mb_release_group_pa from 2 places, 
ext4_mb_discard_group_preallocations and 
ext4_mb_discard_lg_preallocations

In both cases we allocate an ac as a container just for tracing (!)
and never fill in the ac_inode.  There's no reason to be assigning,
testing, or printing it as far as I can see, so just remove it from
the tracepoint.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Reviewed-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

On linux-2.6.36-rc2, if we execute the following script, we can hang
the system when the /bin/sync command is executed:

========================================================================
#!/bin/sh

echo -n "HANG UP TEST: "
/bin/dd if=/dev/zero of=/tmp/img bs=1k count=1 seek=1M 2> /dev/null
/sbin/mkfs.ext4 -Fq /tmp/img
/bin/mount -o loop -t ext4 /tmp/img /mnt
/bin/dd if=/dev/zero of=/mnt/file bs=1 count=1 \
seek=$((16*1024*1024*1024*1024-4096)) 2> /dev/null
/bin/sync
/bin/umount /mnt
echo "DONE"
exit 0
========================================================================

We can see the following backtrace if we get the kdump when this
hangup occurs:

======================================================================
kthread()
=> bdi_writeback_thread()
   => wb_do_writeback()
      => wb_writeback()
         => writeback_inodes_wb()
            => writeback_sb_inodes()
               => writeback_single_inode()
                  => ext4_da_writepages()  ---+ 
                                ^ infinite    |
                                |   loop      |
                                +-------------+
======================================================================

The reason why this hangup happens is described as follows:
1) We write the last extent block of the file whose size is the filesystem 
   maximum size.
2) "BH_Delay" flag is set on the buffer_head of its block.
3) - the member, "m_lblk" of struct mpage_da_data is 4294967295 (UINT_MAX)
   - the member, "m_len" of struct mpage_da_data is 1
  mpage_put_bnr_to_bhs() which is called via ext4_da_writepages()
  cannot clear "BH_Delay" flag of the buffer_head because the type of
  m_lblk is ext4_lblk_t and then m_lblk + m_len is overflow.

  Therefore an infinite loop occurs because ext4_da_writepages()
  cannot write the page (which corresponds to the block) since
  "BH_Delay" flag isn't cleared.
----------------------------------------------------------------------
static void mpage_put_bnr_to_bhs(struct mpage_da_data *mpd,
				struct ext4_map_blocks *map)
{
...
	int blocks = map->m_len;
...
		do {
			// cur_logical = 4294967295
			// map->m_lblk = 4294967295
			// blocks = 1
			// *** map->m_lblk + blocks == 0 (OVERFLOW!) ***
			// (cur_logical >= map->m_lblk + blocks) => true
			if (cur_logical >= map->m_lblk + blocks)
				break;
----------------------------------------------------------------------

NOTE: Mounting with the nodelalloc option will avoid this codepath,
and thus, avoid this hang
Signed-off-by: NToshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

The llseek system call should return EINVAL if passed a seek offset
which results in a write error.  What this maximum offset should be
depends on whether or not the huge_file file system feature is set,
and whether or not the file is extent based or not.


If the file has no "EXT4_EXTENTS_FL" flag, the maximum size which can be 
written (write systemcall) is different from the maximum size which can be 
sought (lseek systemcall).

For example, the following 2 cases demonstrates the differences
between the maximum size which can be written, versus the seek offset
allowed by the llseek system call:

#1: mkfs.ext3 <dev>; mount -t ext4 <dev>
#2: mkfs.ext3 <dev>; tune2fs -Oextent,huge_file <dev>; mount -t ext4 <dev>

Table. the max file size which we can write or seek
       at each filesystem feature tuning and file flag setting
+============+===============================+===============================+
| \ File flag|                               |                               |
|      \     |     !EXT4_EXTENTS_FL          |        EXT4_EXTETNS_FL        |
|case       \|                               |                               |
+------------+-------------------------------+-------------------------------+
| #1         |   write:      2194719883264   | write:       --------------   |
|            |   seek:       2199023251456   | seek:        --------------   |
+------------+-------------------------------+-------------------------------+
| #2         |   write:      4402345721856   | write:       17592186044415   |
|            |   seek:      17592186044415   | seek:        17592186044415   |
+------------+-------------------------------+-------------------------------+

The differences exist because ext4 has 2 maxbytes which are sb->s_maxbytes
(= extent-mapped maxbytes) and EXT4_SB(sb)->s_bitmap_maxbytes (= block-mapped 
maxbytes).  Although generic_file_llseek uses only extent-mapped maxbytes.
(llseek of ext4_file_operations is generic_file_llseek which uses
sb->s_maxbytes.)

Therefore we create ext4 llseek function which uses 2 maxbytes.

The new own function originates from generic_file_llseek().
If the file flag, "EXT4_EXTENTS_FL" is not set, the function alters 
inode->i_sb->s_maxbytes into EXT4_SB(inode->i_sb)->s_bitmap_maxbytes.
Signed-off-by: NToshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>

An ext4 filesystem on a read-only device, with an external journal
which is at a different device number then recorded in the superblock
will fail to honor the read-only setting of the device and trigger
a superblock update (write).

For example:
  - ext4 on a software raid which is in read-only mode
  - external journal on a read-write device which has changed device num
  - attempt to mount with -o journal_dev=<new_number>
  - hits BUG_ON(mddev->ro = 1) in md.c

Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: NMaciej Żenczykowski <zenczykowski@gmail.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Change ext4_ext_zeroout to use sb_issue_zeroout instead of its
own approach to zero out extents.
Signed-off-by: NLukas Czerner <lczerner@redhat.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Use sb_issue_zeroout to zero out inode table and descriptor table
blocks instead of old approach which involves journaling.
Signed-off-by: NLukas Czerner <lczerner@redhat.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

User-space should have the opportunity to check what features doest ext4
support in each particular copy. This adds easy interface by creating new
"features" directory in sys/fs/ext4/. In that directory files
advertising feature names can be created.

Add lazy_itable_init to the feature list.
Signed-off-by: NLukas Czerner <lczerner@redhat.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

When the lazy_itable_init extended option is passed to mke2fs, it
considerably speeds up filesystem creation because inode tables are
not zeroed out.  The fact that parts of the inode table are
uninitialized is not a problem so long as the block group descriptors,
which contain information regarding how much of the inode table has
been initialized, has not been corrupted However, if the block group
checksums are not valid, e2fsck must scan the entire inode table, and
the the old, uninitialized data could potentially cause e2fsck to
report false problems.

Hence, it is important for the inode tables to be initialized as soon
as possble.  This commit adds this feature so that mke2fs can safely
use the lazy inode table initialization feature to speed up formatting
file systems.

This is done via a new new kernel thread called ext4lazyinit, which is
created on demand and destroyed, when it is no longer needed.  There
is only one thread for all ext4 filesystems in the system. When the
first filesystem with inititable mount option is mounted, ext4lazyinit
thread is created, then the filesystem can register its request in the
request list.

This thread then walks through the list of requests picking up
scheduled requests and invoking ext4_init_inode_table(). Next schedule
time for the request is computed by multiplying the time it took to
zero out last inode table with wait multiplier, which can be set with
the (init_itable=n) mount option (default is 10).  We are doing
this so we do not take the whole I/O bandwidth. When the thread is no
longer necessary (request list is empty) it frees the appropriate
structures and exits (and can be created later later by another
filesystem).

We do not disturb regular inode allocations in any way, it just do not
care whether the inode table is, or is not zeroed. But when zeroing, we
have to skip used inodes, obviously. Also we should prevent new inode
allocations from the group, while zeroing is on the way. For that we
take write alloc_sem lock in ext4_init_inode_table() and read alloc_sem
in the ext4_claim_inode, so when we are unlucky and allocator hits the
group which is currently being zeroed, it just has to wait.

This can be suppresed using the mount option no_init_itable.
Signed-off-by: NLukas Czerner <lczerner@redhat.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

This is done the same way as helper sb_issue_discard for
blkdev_issue_discard.
Signed-off-by: NLukas Czerner <lczerner@redhat.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

An attempt to modify the file system during the call to
jbd2_destroy_journal() can lead to a system lockup.  So add some
checking to make it much more obvious when this happens to and to
determine where the offending code is located.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Fix NULL pointer dereference in print_daily_error_info, when   
called on unmounted fs (EXT4_SB(sb) returns NULL), by removing error 
reporting timer in ext4_put_super.

Google-Bug-Id: 3017663
Signed-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

We can't hold the block group spinlock because we ext4_issue_discard()
calls wait and hence can get rescheduled.

Google-Bug-Id: 3017678
Signed-off-by: NLukas Czerner <lczerner@redhat.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

sb_issue_discard() is returning negative error code, so check for
-EOPNOTSUPP.
Signed-off-by: NLukas Czerner <lczerner@redhat.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

I'm uneasy with lots of stuff going on in ext4_da_writepages(),
but bumping nr_to_write from LLONG_MAX to -8 clearly isn't
making anything better, so avoid the multiplier in that case.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Today we simply break out of the inner loop when we have accumulated
max_pages; this keeps scanning forwad and doing pagevec_lookup_tag()
in the while (!done) loop, this does potentially a lot of work
with no net effect.

When we have accumulated max_pages, just clean up and return.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

ext4_group_info structures are currently allocated with kmalloc().
With a typical 4K block size, these are 136 bytes each -- meaning
they'll each consume a 256-byte slab object.  On a system with many
ext4 large partitions, that's a lot of wasted kernel slab space.
(E.g., a single 1TB partition will have about 8000 block groups, using
about 2MB of slab, of which nearly 1MB is wasted.)

This patch creates an array of slab pointers created as needed --
depending on the superblock block size -- and uses these slabs to
allocate the group info objects.

Google-Bug-Id: 2980809
Signed-off-by: NCurt Wohlgemuth <curtw@google.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

ac->inode is set to null in function ext4_mb_release_group_pa(),
and then trace_ext4_mballoc_discard(ac) is called, the kernel
will panic.

BUG: unable to handle kernel NULL pointer dereference at 000000a4
IP: [<f87e1714>] ftrace_raw_event_ext4__mballoc+0x54/0xc0 [ext4]
*pdpt = 0000000000abd001 *pde = 0000000000000000
Oops: 0000 [#1] SMP

Pid: 550, comm: flush-8:16 Not tainted 2.6.36-rc1 #1 SE7320EP2/Altos G530
EIP: 0060:[<f87e1714>] EFLAGS: 00010206 CPU: 1
EIP is at ftrace_raw_event_ext4__mballoc+0x54/0xc0 [ext4]
EAX: f32ac840 EBX: f3f1cf88 ECX: f32ac840 EDX: 00000000
ESI: f32ac83c EDI: f880b9d8 EBP: 00000000 ESP: f4b77ae4
 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
Process flush-8:16 (pid: 550, ti=f4b76000 task=f613e540 task.ti=f4b76000)
Call Trace:
 [<f87f5ac1>] ? ext4_mb_release_group_pa+0x121/0x150 [ext4]
 [<f87f8356>] ? ext4_mb_discard_group_preallocations+0x336/0x400 [ext4]
 [<f87fb7f1>] ? ext4_mb_new_blocks+0x3d1/0x4f0 [ext4]
 [<c05a6c5b>] ? __make_request+0x10b/0x440
 [<f87f1fb4>] ? ext4_ext_map_blocks+0x1334/0x1980 [ext4]
 [<c04ac78a>] ? rb_reserve_next_event+0xaa/0x3b0
 [<f87d18d6>] ? ext4_map_blocks+0xd6/0x1d0 [ext4]
 [<f87d2da7>] ? mpage_da_map_blocks+0xc7/0x8a0 [ext4]
 [<c04c8a68>] ? find_get_pages_tag+0x38/0x110
 [<c04d23a5>] ? __pagevec_release+0x15/0x20
 [<f87d3ca5>] ? ext4_da_writepages+0x2b5/0x5d0 [ext4]
 [<c04cfbe0>] ? __writepage+0x0/0x30
 [<c04d0e34>] ? do_writepages+0x14/0x30
 [<c0526600>] ? writeback_single_inode+0xa0/0x240
 [<c0526971>] ? writeback_sb_inodes+0xc1/0x180
 [<c0526ab8>] ? writeback_inodes_wb+0x88/0x140
 [<c0526d7b>] ? wb_writeback+0x20b/0x320
 [<c045aca7>] ? lock_timer_base+0x27/0x50
 [<c0526fe0>] ? wb_do_writeback+0x150/0x190
 [<c05270a8>] ? bdi_writeback_thread+0x88/0x1f0
 [<c043b680>] ? complete+0x40/0x60
 [<c0527020>] ? bdi_writeback_thread+0x0/0x1f0
 [<c0469474>] ? kthread+0x74/0x80
 [<c0469400>] ? kthread+0x0/0x80
 [<c040a23e>] ? kernel_thread_helper+0x6/0x10
Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

This fixes a hang seen in jbd2_journal_release_jbd_inode
on a lot of Power 6 systems running with ext4. When we get
in the hung state, all I/O to the disk in question gets blocked
where we stay indefinitely. Looking at the task list, I can see
we are stuck in jbd2_journal_release_jbd_inode waiting on a
wake up. I added some debug code to detect this scenario and
dump additional data if we were stuck in jbd2_journal_release_jbd_inode
for longer than 30 minutes. When it hit, I was able to see that
i_flags was 0, suggesting we missed the wake up.

This patch changes i_flags to be an unsigned long, uses bit operators
to access it, and adds barriers around the accesses. Prior to applying
this patch, we were regularly hitting this hang on numerous systems
in our test environment. After applying the patch, the hangs no longer
occur.
Signed-off-by: NBrian King <brking@linux.vnet.ibm.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

It turns out we have several problems with how EOFBLOCKS_FL is
handled.  First of all, there was a fencepost error where we were not
clearing the EOFBLOCKS_FL when fill in the last uninitialized block,
but rather when we allocate the next block _after_ the uninitalized
block.  Secondly we were not testing to see if we needed to clear the
EOFBLOCKS_FL when writing to the file O_DIRECT or when were converting
an uninitialized block (which is the most common case).

Google-Bug-Id: 2928259
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

When caching is disabled on the MN10300 arch, the sys_cacheflush()
function is removed by conditional stuff in the makefiles, but is still
referred to by the syscall table.

Provide a null version that just returns 0 when caching is disabled (or
-EINVAL if the arguments are silly).
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Tssk.  Apparently Al hadn't checked commit c52c2ddc ("alpha: switch
osf_sigprocmask() to use of sigprocmask()") at all. It doesn't compile.

Fixed as per suggestions from Michael Cree.
Reported-by: NMichael Cree <mcree@orcon.net.nz>
Cc: Al Viro <viro@ftp.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  ahci: fix module refcount breakage introduced by libahci split

libata depends on scsi_host_template for module reference counting and
sht's should be owned by each low level driver.  During libahci split,
the sht was left with libahci.ko leaving the actual low level drivers
not reference counted.  This made ahci and ahci_platform always
unloadable even while they're being actively used.

Fix it by defining AHCI_SHT() macro in ahci.h and defining a sht for
each low level ahci driver.

stable: only applicable to 2.6.35.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NPedro Francisco <pedrogfrancisco@gmail.com>
Tested-by: NMichael Tokarev <mjt@tls.msk.ru>
Cc: stable@kernel.org
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging:
  hwmon (coretemp): Fix build breakage if SMP is undefined

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI: fix pci_resource_alignment prototype

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (47 commits)
  tcp: Fix >4GB writes on 64-bit.
  net/9p: Mount only matching virtio channels
  de2104x: fix ethtool
  tproxy: check for transparent flag in ip_route_newports
  ipv6: add IPv6 to neighbour table overflow warning
  tcp: fix TSO FACK loss marking in tcp_mark_head_lost
  3c59x: fix regression from patch "Add ethtool WOL support"
  ipv6: add a missing unregister_pernet_subsys call
  s390: use free_netdev(netdev) instead of kfree()
  sgiseeq: use free_netdev(netdev) instead of kfree()
  rionet: use free_netdev(netdev) instead of kfree()
  ibm_newemac: use free_netdev(netdev) instead of kfree()
  smsc911x: Add MODULE_ALIAS()
  net: reset skb queue mapping when rx'ing over tunnel
  br2684: fix scheduling while atomic
  de2104x: fix TP link detection
  de2104x: fix power management
  de2104x: disable autonegotiation on broken hardware
  net: fix a lockdep splat
  e1000e: 82579 do not gate auto config of PHY by hardware during nominal use
  ...

Commit e40cc4bd introduced
a build breakage if CONFIG_SMP is undefined. This commit
fixes the problem.

This fix is only a workaround. For a real fix, cpu_sibling_mask() should
be defined in UP include code, eg in linux/smp.h, and asm/smp.h should not be
included directly. This fix is currently not possible because asm/smp.h defines
cpu_sibling_mask() unconditionally and is included directly from many source
files.
Reported-by: NIngo Molnar <mingo@elte.hu>
Tested-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>

* 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Avoid 'constant_test_bit()' misoptimization due to cast to non-volatile

Fixes kernel bugzilla #16603

tcp_sendmsg() truncates iov_len to an 'int' which a 4GB write to write
zero bytes, for example.

There is also the problem higher up of how verify_iovec() works.  It
wants to prevent the total length from looking like an error return
value.

However it does this using 'int', but syscalls return 'long' (and
thus signed 64-bit on 64-bit machines).  So it could trigger
false-positives on 64-bit as written.  So fix it to use 'long'.
Reported-by: NOlaf Bonorden <bono@onlinehome.de>
Reported-by: NDaniel Büse <dbuese@gmx.de>
Reported-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The PKT_CTRL_CMD_STATUS device ioctl retrieves a pointer to a
pktcdvd_device from the global pkt_devs array.  The index into this
array is provided directly by the user and is a signed integer, so the
comparison to ensure that it falls within the bounds of this array will
fail when provided with a negative index.

This can be used to read arbitrary kernel memory or cause a crash due to
an invalid pointer dereference.  This can be exploited by users with
permission to open /dev/pktcdvd/control (on many distributions, this is
readable by group "cdrom").
Signed-off-by: NDan Rosenberg <dan.j.rosenberg@gmail.com>
[ Rather than add a cast, just make the function take the right type -Linus ]
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The configuration choice for the port on which the GDB stub listens has
a default of GDBSTUB_TTYSM0, but this should be GDBSTUB_ON_TTYSM0 to
match the option.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

p9_virtio_create will only compare the the channel's tag characters
against the device name till the end of the channel's tag but not till
the end of the device name. This means that if a user defines channels
with the tags foo and foobar then he would mount foo when he requested
foonot and may mount foo when he requested foobar.

Thus it is necessary to check both string lengths against each other in
case of a successful partial string match.
Signed-off-by: NSven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When the interface is up, using ethtool breaks it because:
a) link is put down but media_timer interval is not shortened to NO_LINK
b) rxtx is stopped but not restarted

Also manual 10baseT-HD (and probably FD too - untested) mode does not work -
the link is forced up, packets are transmitted but nothing is received.
Changing CSR14 value to match documentation (not disabling link check) fixes this.
Signed-off-by: NOndrej Zary <linux@rainbow-software.org>
Acked-by: NJeff Garzik <jgarzik@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>