Some laptops cause annoying clicks or noises at shutdown/reboot since
the speaker pin is set still high.  Apply the same procedure used for
the suspend to avoid such clicks/noises for freeing the codec, too.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Function hp_bseries_system() is always used, outside of
CONFIG_ boundaries/controls, so move it.

sound/pci/hda/patch_sigmatel.c:5458: error: implicit declaration of function 'hp_bseries_system'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The XO-1.5 laptop now has a unique subvendor/subproduct ID, which can
be used to automatically select the correct CXT5066 configuration.
Signed-off-by: NDaniel Drake <dsd@laptop.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch enables GPIO to control mute LED indicator on the HP systems
with the special string in BIOS and applies it with the correct polarity on
HP B-series systems.

It also restores configuration of the pin intended as the second Headphone
on HP B-series systems but configured as something else in the BIOS to
pass MS DTM.
Signed-off-by: NVitaliy Kulikov <Vitaliy.Kulikov@idt.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

alc_automute_pin() might be called even if any HP pin is defined, and
it will result in verbs with NID=0.

This patch adds a check for the validity of HP widget before issuing
any verbs.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

BugLink: https://bugs.launchpad.net/bugs/368629

We should use a quirk mask for these Dell Inspiron Mini9s and Vostro
A90s, as the model=dell quirk appears to enable audio on them.
Signed-off-by: NDaniel T Chen <crimsun@ubuntu.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When any codec communication error happens, try to switch to the polling
mode first before turning off MSI.  MSI gets more stable nowadays, thus
we should keep it on as much as possible.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added a proper ifdef CONFIG_SND_DEBUG_VERBOSE to avoid a compile warning:
  sound/pci/hda/patch_intelhdmi.c:406: warning: ‘hdmi_get_channel_count’ defined but not used
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add support for VT1818S codec, which is similiar with VT1708S.
Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add the generic device ID for NVIDIA HDA controller.
Signed-off-by: NPeer Chen <peerchen@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The Intel IbexPeak HDMI codec supports 2 converters and 3 pins,
which requires converting the cvt_nid/pin_nid to arrays.

The active pin number (the one connected with a live HDMI monitor/sink)
will be dynamically identified on hotplug events.

It exports two HDMI devices, so that user space can choose the A/V pipe
for sending the audio samples.

It's still undefined behavior when there are two active monitors
connected and routed to the same audio converter.
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

No behavior change.
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Remove pcm callbacks open/close in favor of the prepare/cleanup.
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

We'll be managing multiple HDMI audio sources/sinks on our own.
So remove multiout dependency from intelhdmi.
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

No behavior change.
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The new Intel HDMI codec supports 2 independant HDMI/DisplayPort pipes.
We'll be exporting them as 2 pcm devices. So bump up the allowed number
of HDMI devices.
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This unifies the code and data structure,
and makes it easy to add more HDMI devices.
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

An earlier patch merely adds id for 0x80862804.
It has 2/3 cvt/pin nodes and shall be tied to the IbexPeak handler.
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The ALC662/663 parser calls wrongly alc880_auto_create_input_ctls()
to check the capture source selections.  This should be alc882, instead.

Reference: Novell bnc#546918
	http://bugzilla.novell.com/show_bug.cgi?id=546918Signed-off-by: NTakashi Iwai <tiwai@suse.de>

48 kHz limit is for slightly better stability, and sample rates other
than 48k (like 96k/192k) are for better sound quality.
We choose better quality, so remove the 48k limit.
Signed-off-by: NLogan Li <loganli@viatech.com.cn>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In the commit f0613d57
    ALSA: hda - Add full rates/formats support for Nvidia HDMI
the flag LIMITIED_RATE_FMT_SUPPORT was set as default, as I forgot
to clear before commit.

Let's enable all formats/rates as default.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The volume-knob widget needs to be set with 0x7f instead of 0xff
for Dell laptops with STAC9228 codec, too, like the previous commit.

Reference: Novell bnc#545013
	http://bugzilla.novell.com/show_bug.cgi?id=545013Signed-off-by: NTakashi Iwai <tiwai@suse.de>

On FSC laptops, the sound gets muted gradually when the volume is chnaged.
This is due to the wrong volume-knob widget setup.  The delta bit (bit 7)
shouldn't be set for these devices.

This patch adds a new quirk to set the value 0x7f to the widget 0x24
instead of 0xff.

Reference: Novell bnc#546006
	http://bugzilla.novell.com/show_bug.cgi?id=546006Signed-off-by: NTakashi Iwai <tiwai@suse.de>

ALC861-VD lenovo model causes overflow of spec->init_verbs entries due to
the recent changes.  Simply increase the array size to avoid the overflow.
Reported-by: NLuca Tettamanti <kronos.it@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fixes:

sound/pci/hda/patch_via.c: In function 'patch_vt1718S':
sound/pci/hda/patch_via.c:4951: error: expected expression before 'return'
sound/pci/hda/patch_via.c: In function 'patch_vt1716S':
sound/pci/hda/patch_via.c:5441: error: expected expression before 'return'
sound/pci/hda/patch_via.c: In function 'patch_vt2002P':
sound/pci/hda/patch_via.c:5794: error: expected expression before 'return'
sound/pci/hda/patch_via.c: In function 'patch_vt1812':
sound/pci/hda/patch_via.c:6148: error: expected expression before 'return'
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: NLogan Li <loganli@viatech.com.cn>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: NLogan Li <loganli@viatech.com.cn>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

According to customer request, hp should be default to redirected mode,
i.e. PW4 connect select default to to MW0.
Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: NLogan Li <loganli@viatech.com.cn>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

To via_control_templates[].
Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: NLogan Li <loganli@viatech.com.cn>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: NLogan Li <loganli@viatech.com.cn>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: NLogan Li <loganli@viatech.com.cn>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: NLogan Li <loganli@viatech.com.cn>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: NLogan Li <loganli@viatech.com.cn>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: NLogan Li <loganli@viatech.com.cn>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

As init verbs, vt17xx_volume_init_verb is a better place to hold them.
Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: NLogan Li <loganli@viatech.com.cn>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>