Remove the tx_queue->handle_tso function pointer, and just use
 tx_queue->tso_version to decide which function to call, thus removing
 an indirect call from the fast path.
Instead of passing a tso_v2 flag to efx_mcdi_tx_init(), set the desired
 tx_queue->tso_version before calling it.
In efx_mcdi_tx_init(), report back failure to obtain a TSOv2 context by
 setting tx_queue->tso_version to 0, which will cause the TX path to
 use the GSO-based fallback.
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Won't actually be exercised until we start advertising the corresponding
 offload features.
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If the MC reports the VXLAN_NVGRE datapath capability, then these queues
 can be used for checksum offload of encapsulated packets.
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Nothing yet creates inner csum TXQs; just change all references to
 EFX_TXQ_TYPE_OFFLOAD to the new EFX_TXQ_TYPE_OUTER_CSUM.
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Make it possible to have an arbitrary mapping from types to labels,
 because when we add inner-csum-offload TXQs there will no longer be a
 convenient nesting hierarchy of NIC types (EF10 will have inner-csum
 TXQs, while Siena will have HIGHPRI).
Correct a misleading comment on efx_hard_start_xmit().
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

These are never modified, so constify them to allow the compiler to
place them in read-only memory. This moves about 25kB to read-only
memory as seen by the output of the size command.

Before:
   text    data     bss     dec     hex filename
 296203   65464    1248  362915   589a3 drivers/net/ethernet/marvell/octeontx2/af/octeontx2_af.ko

After:
   text    data     bss     dec     hex filename
 321003   40664    1248  362915   589a3 drivers/net/ethernet/marvell/octeontx2/af/octeontx2_af.ko
Signed-off-by: NRikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Edward Cree says:

====================
sfc: misc cleanups

Clean up a few nits I noticed while working on TXQ stuff.
====================
Reviewed-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The old_channel argument is never used, so remove it.
The function is only called from elsewhere in efx_channels.c, so make
 it static and remove the declaration from the header file.
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The statement above it already returns, so there is no way to get here.
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

efx_init_struct already calls this, we don't need to do it again.
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Each MDB entry is encoded in a nested netlink attribute called
'MDBA_MDB_ENTRY'. In turn, this attribute contains another nested
attributed called 'MDBA_MDB_ENTRY_INFO', which encodes a single port
group entry within the MDB entry.

The cited commit added the ability to restart a dump from a specific
port group entry. However, on failure to add a port group entry to the
dump the entire MDB entry (stored in 'nest2') is removed, resulting in
missing port group entries.

Fix this by finalizing the MDB entry with the partial list of already
encoded port group entries.

Fixes: 5205e919 ("net: bridge: mcast: add support for src list and filter mode dumping")
Signed-off-by: NIdo Schimmel <idosch@nvidia.com>
Acked-by: NNikolay Aleksandrov <nikolay@nvidia.com>
Reviewed-by: NJiri Pirko <jiri@nvidia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The variable err is being initialized with a value that is never read and
it is being updated later with a new value. The initialization is redundant
and can be removed.  Also re-order variable declarations in reverse
Christmas tree ordering.

Addresses-Coverity: ("Unused value")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Reviewed-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Oleksij Rempel says:

====================
ag71xx: add ethtool and flow control support

The main target of this patches is to provide flow control support
for ag71xx driver. To be able to validate this functionality, I also
added ethtool support with HW counters. So, this patches was validated
with iperf3 and counters showing Pause frames send or received by this
NIC.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add flow control support. The functionality was tested on AR9331 SoC and
confirmed by iperf3 results and HW counters exported over ethtool.
Following test configurations was used:

iMX6S receiver <--- TL-SG1005D switch <---- AR9331 sender

The switch is supporting symmytric flow control:
Settings for eth0:
        Supported ports: [ MII ]
        Supported link modes:   10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
        Supported pause frame use: Symmetric Receive-only
        Supports auto-negotiation: Yes
        Supported FEC modes: Not reported
        Advertised link modes:  10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
        Advertised pause frame use: Symmetric
        Advertised auto-negotiation: Yes
        Advertised FEC modes: Not reported
        Link partner advertised link modes:  10baseT/Half 10baseT/Full
                                             100baseT/Half 100baseT/Full
--->>   Link partner advertised pause frame use: Symmetric
        Link partner advertised auto-negotiation: Yes
        Link partner advertised FEC modes: Not reported
        Speed: 100Mb/s
        Duplex: Full
        Auto-negotiation: on
        Port: MII
        PHYAD: 4
        Transceiver: external
        Link detected: yes

The iMX6S system was configured to 10Mbit, to let the switch use flow
control:
  - ethtool -s eth0 speed 10

With flow control disabled on AR9331:
  - ethtool -A eth0  rx off tx off
  - iperf3 -u -c 172.17.0.1 -b100M -l1472 -t10

[ ID] Interval           Transfer     Bitrate         Jitter    Lost/Total Datagrams
[  5]   0.00-10.00  sec  66.2 MBytes  55.5 Mbits/sec  0.000 ms  0/47155 (0%)  sender
[  5]   0.00-10.04  sec  11.5 MBytes  9.57 Mbits/sec  1.309 ms  38986/47146 (83%)  receiver

With flow control enabled on AR9331:
  - ethtool -A eth0  rx on tx on
  - iperf3 -u -c 172.17.0.1 -b100M -l1472 -t10

[ ID] Interval           Transfer     Bitrate         Jitter    Lost/Total Datagrams
[  5]   0.00-10.00  sec  15.1 MBytes  12.6 Mbits/sec  0.000 ms  0/10727 (0%)  sender
[  5]   0.00-10.05  sec  11.5 MBytes  9.57 Mbits/sec  1.371 ms  2525/10689 (24%)  receiver

Similar results are get in opposite direction by introducing extra CPU
load on AR9331:
  - chrt 40 dd if=/dev/zero of=/dev/null &
Signed-off-by: NOleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add basic ethtool support. The functionality was tested on AR9331 SoC.
Signed-off-by: NOleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The "SLF_OUTWAIT" flag defined in x25_asy.h is not actually used.
It is only cleared at one place in x25_asy.c but is never read or set.
So we can remove it.
Signed-off-by: NXie He <xie.he.0141@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We found the following warning when using W=1 to build kernel:

drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:3634:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
int ret, coe = priv->hw->rx_csum;

When digging stmmac_get_rx_header_len(), dwmac4_get_rx_header_len() and
dwxgmac2_get_rx_header_len() return 0 only, without any error code to
report. Therefore, it's better to define get_rx_header_len() as void.
Signed-off-by: NLuo Jiaxing <luojiaxing@huawei.com>
Reviewed-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

David Awogbemila says:

====================
Add GVE Features.

Note: Patch 4 in v3 was dropped.

Patch 4 (patch 5 in v3): Start/stop timer only when report stats is
				enabled/disabled.
Patch 7 (patch 8 in v3): Use netdev_info, not dev_info, to log
				device link status.
====================
Acked-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This change allows the driver to report the device link speed
when the ethtool command:
	ethtool <nic name>
is run.
Getting the link speed is done via a new admin queue command:
ReportLinkSpeed.
Reviewed-by: NYangchun Fu <yangchun@google.com>
Signed-off-by: NDavid Awogbemila <awogbemila@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This makes the driver better aware of the connectivity status of the
device. Based on the device's status register, the driver can call
netif_carrier_{on,off}.
Reviewed-by: NYangchun Fu <yangchun@google.com>
Signed-off-by: NPatricio Noyola <patricion@google.com>
Signed-off-by: NDavid Awogbemila <awogbemila@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Adds support for batching AQ commands and uses it for creating and
destroying queues.
Reviewed-by: NYangchun Fu <yangchun@google.com>
Signed-off-by: NSagi Shahar <sagis@google.com>
Signed-off-by: NDavid Awogbemila <awogbemila@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This adds per queue NIC stats to ethtool stats and to report-stats.
These stats are always exposed to guest whether or not the
report-stats flag is turned on.
Signed-off-by: NDavid Awogbemila <awogbemila@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This adds functionality to report driver stats to Hypervisor.
(Users may want to turn this feature off as a matter of privacy
so a "report-stats" flag is added as an ethtool priv option.
It is also disabled by default.)
The hypervisor would trigger a stats report in case "too many"
packets dropped; the stats would be useful in debugging stuck
queues.
A "stats_report_trigger_cnt" stat is added to count the number of times
the hypervisor attempts to trigger stats report.

A timer is also added so that when report-stats is enabled, stat are
updated once every 20 seconds.
Reviewed-by: NYangchun Fu <yangchun@google.com>
Signed-off-by: NKuo Zhao <kuozhao@google.com>
Signed-off-by: NDavid Awogbemila <awogbemila@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Update the driver to use dev_info/err instead of netif_info/err.
Reviewed-by: NYangchun Fu <yangchun@google.com>
Signed-off-by: NCatherine Sullivan <csully@google.com>
Signed-off-by: NDavid Awogbemila <awogbemila@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Sample output of "ethtool -S <interface-name>" with 1 RX queue and 1 TX
queue:
NIC statistics:
     rx_packets: 1039
     tx_packets: 37
     rx_bytes: 822071
     tx_bytes: 4100
     rx_dropped: 0
     tx_dropped: 0
     tx_timeouts: 0
     rx_skb_alloc_fail: 0
     rx_buf_alloc_fail: 0
     rx_desc_err_dropped_pkt: 0
     interface_up_cnt: 1
     interface_down_cnt: 0
     reset_cnt: 0
     page_alloc_fail: 0
     dma_mapping_error: 0
     rx_posted_desc[0]: 1365
     rx_completed_desc[0]: 341
     rx_bytes[0]: 215094
     rx_dropped_pkt[0]: 0
     rx_copybreak_pkt[0]: 3
     rx_copied_pkt[0]: 3
     tx_posted_desc[0]: 6
     tx_completed_desc[0]: 6
     tx_bytes[0]: 420
     tx_wake[0]: 0
     tx_stop[0]: 0
     tx_event_counter[0]: 6
     adminq_prod_cnt: 34
     adminq_cmd_fail: 0
     adminq_timeouts: 0
     adminq_describe_device_cnt: 1
     adminq_cfg_device_resources_cnt: 1
     adminq_register_page_list_cnt: 16
     adminq_unregister_page_list_cnt: 0
     adminq_create_tx_queue_cnt: 8
     adminq_create_rx_queue_cnt: 8
     adminq_destroy_tx_queue_cnt: 0
     adminq_destroy_rx_queue_cnt: 0
     adminq_dcfg_device_resources_cnt: 0
     adminq_set_driver_parameter_cnt: 0
Reviewed-by: NYangchun Fu <yangchun@google.com>
Signed-off-by: NKuo Zhao <kuozhao@google.com>
Signed-off-by: NDavid Awogbemila <awogbemila@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This adds support for getting and setting the RX copybreak
value via ethtool.
Reviewed-by: NYangchun Fu <yangchun@google.com>
Signed-off-by: NKuo Zhao <kuozhao@google.com>
Signed-off-by: NDavid Awogbemila <awogbemila@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge tag 'wireless-drivers-next-2020-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
wireless-drivers-next patches for v5.10

First set of patches for v5.10. Most noteworthy here is ath11k getting
initial support for QCA6390 and IPQ6018 devices. But most of the
patches are cleanup: W=1 warning fixes, fallthrough keywords, DMA API
changes and tasklet API changes.

Major changes:

ath10k

* support SDIO firmware codedumps

* support station specific TID configurations

ath11k

* add support for IPQ6018

* add support for QCA6390 PCI devices

ath9k

* add support for NL80211_EXT_FEATURE_CAN_REPLACE_PTK0 to improve PTK0
  rekeying

wcn36xx

* add support for TX ack
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ath.git patches for v5.10. Major changes:

ath10k

* support SDIO firmware codedumps

* support station specific TID configurations

ath11k

* add support for IPQ6018

There is no caller in tree, so can remove it.
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200909135834.38448-1-yuehaibing@huawei.com

There is no caller in tree, so can remove it.
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200909134533.19604-1-yuehaibing@huawei.com

If CONFIG_REMOTEPROC was disabled the linking failed with:

ERROR: modpost: "rproc_get_by_phandle" [drivers/net/wireless/ath/ath11k/ath11k.ko] undefined!

Compile tested only.
Reported-by: NRandy Dunlap <rdunlap@infradead.org>
Fixes: 1ff8ed78 ("ath11k: use remoteproc only with AHB devices")
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/0101017476e38f40-c4168ac4-c00a-4220-a032-fe17e4a157cb-000000@us-west-2.amazonses.com

During probe ath11k_init_hw_params() is called from ath11k_core_pre_init()
and is not needed agian in ath11k_core_init().

Tested on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00009-QCAHKSWPL_SILICONZ-1

Fixes: 1ff8ed78 (ath11k: use remoteproc only with AHB devices)
Signed-off-by: NAnilkumar Kolli <akolli@codeaurora.org>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/010101746d2a40d3-25cd7dbe-c0dd-4fdf-8735-366d7fb40207-000000@us-west-2.amazonses.com

Adding raw mode tx/rx support. Also, adding support
for software crypto which depends on raw mode.

To enable raw mode tx/rx:
insmod ath11k.ko frame_mode=0

To enable software crypto:
insmod ath11k.ko crypto_mode=1

These modes could be helpful in debugging crypto related issues.

Tested-on: IPQ8074 WLAN.HK.2.1.0.1-01228-QCAHKSWPL_SILICONZ-1
Signed-off-by: NManikanta Pubbisetty <mpubbise@codeaurora.org>
Signed-off-by: NVenkateswara Naralasetty <vnaralas@codeaurora.org>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/010101746c6a52d9-18302a2c-0d6d-4057-aa4b-95960c809646-000000@us-west-2.amazonses.com

IPQ6018 has one 5G and one 2G radio with 2x2,
shares ipq8074 configurations.

Tested on: IPQ6018 hw1.0 AHB WLAN.HK.2.2-02134-QCAHKSWPL_SILICONZ-1
Tested on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00009-QCAHKSWPL_SILICONZ-1
Signed-off-by: NAnilkumar Kolli <akolli@codeaurora.org>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/010101746cb68b63-c2bc31ec-a31e-442e-a572-26f4c045c06b-000000@us-west-2.amazonses.com

Move target CE config and target CE service config to hw_params.
No functional changes.

Tested on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00009-QCAHKSWPL_SILICONZ-1
Signed-off-by: NAnilkumar Kolli <akolli@codeaurora.org>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/010101746cb685d9-6bedeccb-29a1-4d32-8664-fcfe7d105f4a-000000@us-west-2.amazonses.com

Add IPQ6018 wireless driver support,
its based on ath11k driver.
Signed-off-by: NAnilkumar Kolli <akolli@codeaurora.org>
Reviewed-by: NRob Herring <robh@kernel.org>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/010101746cb6751a-ca300933-1174-4534-a01b-b1dbf1c1f305-000000@us-west-2.amazonses.com

Fixes the following warning when using W=1 to build kernel:

drivers/net/ethernet/smsc/smc91x.c: In function ‘smc_phy_configure’:
drivers/net/ethernet/smsc/smc91x.c:1039:6: warning: variable ‘status’ set but not used [-Wunused-but-set-variable]
  int status;
Signed-off-by: NLuo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Karsten Graul says:

====================
net/smc: updates 2020-09-10

Please apply the following patch series for smc to netdev's net-next tree.

This patch series is a mix of various improvements and cleanups.
The patches 1 and 10 improve the handling of large parallel workloads.
Patch 8 corrects a kernel config default for config CCWGROUP on s390.
Patch 9 allows userspace tools to retrieve socket information for more
sockets.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There are 6 types of workers which exist per smc connection. 3 of them
are used for listen and handshake processing, another 2 are used for
close and abort processing and 1 is the tx worker that moves calls to
sleeping functions into a worker.
To prevent flooding of the system work queue when many connections are
opened or closed at the same time (some pattern uperf implements), move
those workers to one of 3 smc-specific work queues. Two work queues are
module-global and used for handshake and close workers. The third work
queue is defined per link group and used by the tx workers that may
sleep waiting for resources of this link group.
And in smc_llc_enqueue() queue the llc_event_work work to the system
prio work queue because its critical that this work is started fast.
Reviewed-by: NUrsula Braun <ubraun@linux.ibm.com>
Signed-off-by: NKarsten Graul <kgraul@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When the netlink messages to be sent to the userspace
are too big for a single netlink message, send them in
chunks using the netlink_dump infrastructure. Modify the
smc diag dump code so that it can signal to the netlink_dump
infrastructure that it needs to send more data.
Signed-off-by: NGuvenc Gulce <guvenc@linux.ibm.com>
Signed-off-by: NKarsten Graul <kgraul@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>