In DTB case, i2c-core doesn't create slave device which is installed
on i2c-xgene bus because of missing code in this driver.
This patch fixes this issue.
Signed-off-by: NTin Huynh <tnhuynh@apm.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

smbus functions return -ve on error, 0 on success.  However,
__i2c_transfer() have a different return signature - -ve on error, or
number of buffers transferred (which may be zero or greater.)

The upshot of this is that the sense of the test is reversed when using
the mux on a bus supporting the master_xfer method: we cache the value
and never retry if we fail to transfer any buffers, but if we succeed,
we clear the cached value.

Fix this by making pca954x_reg_write() return a negative error code for
all failure cases.

Fixes: 463e8f84 ("i2c: mux: pca954x: retry updating the mux selection on failure")
Acked-by: NPeter Rosin <peda@axentia.se>
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Do not infinitely retry register readq and writeq operations
in order to not lock up the CPU in case the TWSI gets stuck.

Return -EIO in case of a failed data read. For all other
cases just return so subsequent operations will fail
and trigger the recovery.
Signed-off-by: NJan Glauber <jglauber@cavium.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Pull ceph updates from Ilya Dryomov:
 "A varied set of changes:

   - a large rework of cephx auth code to cope with CONFIG_VMAP_STACK
     (myself). Also fixed a deadlock caused by a bogus allocation on the
     writeback path and authorize reply verification.

   - a fix for long stalls during fsync (Jeff Layton). The client now
     has a way to force the MDS log flush, leading to ~100x speedups in
     some synthetic tests.

   - a new [no]require_active_mds mount option (Zheng Yan).

     On mount, we will now check whether any of the MDSes are available
     and bail rather than block if none are. This check can be avoided
     by specifying the "no" option.

   - a couple of MDS cap handling fixes and a few assorted patches
     throughout"

* tag 'ceph-for-4.10-rc1' of git://github.com/ceph/ceph-client: (32 commits)
  libceph: remove now unused finish_request() wrapper
  libceph: always signal completion when done
  ceph: avoid creating orphan object when checking pool permission
  ceph: properly set issue_seq for cap release
  ceph: add flags parameter to send_cap_msg
  ceph: update cap message struct version to 10
  ceph: define new argument structure for send_cap_msg
  ceph: move xattr initialzation before the encoding past the ceph_mds_caps
  ceph: fix minor typo in unsafe_request_wait
  ceph: record truncate size/seq for snap data writeback
  ceph: check availability of mds cluster on mount
  ceph: fix splice read for no Fc capability case
  ceph: try getting buffer capability for readahead/fadvise
  ceph: fix scheduler warning due to nested blocking
  ceph: fix printing wrong return variable in ceph_direct_read_write()
  crush: include mapper.h in mapper.c
  rbd: silence bogus -Wmaybe-uninitialized warning
  libceph: no need to drop con->mutex for ->get_authorizer()
  libceph: drop len argument of *verify_authorizer_reply()
  libceph: verify authorize reply on connect
  ...

Pull overlayfs updates from Miklos Szeredi:
 "This update contains:

   - try to clone on copy-up

   - allow renaming a directory

   - split source into managable chunks

   - misc cleanups and fixes

  It does not contain the read-only fd data inconsistency fix, which Al
  didn't like. I'll leave that to the next year..."

* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: (36 commits)
  ovl: fix reStructuredText syntax errors in documentation
  ovl: fix return value of ovl_fill_super
  ovl: clean up kstat usage
  ovl: fold ovl_copy_up_truncate() into ovl_copy_up()
  ovl: create directories inside merged parent opaque
  ovl: opaque cleanup
  ovl: show redirect_dir mount option
  ovl: allow setting max size of redirect
  ovl: allow redirect_dir to default to "on"
  ovl: check for emptiness of redirect dir
  ovl: redirect on rename-dir
  ovl: lookup redirects
  ovl: consolidate lookup for underlying layers
  ovl: fix nested overlayfs mount
  ovl: check namelen
  ovl: split super.c
  ovl: use d_is_dir()
  ovl: simplify lookup
  ovl: check lower existence of rename target
  ovl: rename: simplify handling of lower/merged directory
  ...

Pull btrfs updates from Chris Mason:
 "Jeff Mahoney and Dave Sterba have a really nice set of cleanups in
  here, and Christoph pitched in corrections/improvements to make btrfs
  use proper helpers for bio walking instead of doing it by hand.

  There are some key fixes as well, including some long standing bugs
  that took forever to track down in btrfs_drop_extents and during
  balance"

* 'for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (77 commits)
  btrfs: limit async_work allocation and worker func duration
  Revert "Btrfs: adjust len of writes if following a preallocated extent"
  Btrfs: don't WARN() in btrfs_transaction_abort() for IO errors
  btrfs: opencode chunk locking, remove helpers
  btrfs: remove root parameter from transaction commit/end routines
  btrfs: split btrfs_wait_marked_extents into normal and tree log functions
  btrfs: take an fs_info directly when the root is not used otherwise
  btrfs: simplify btrfs_wait_cache_io prototype
  btrfs: convert extent-tree tracepoints to use fs_info
  btrfs: root->fs_info cleanup, access fs_info->delayed_root directly
  btrfs: root->fs_info cleanup, add fs_info convenience variables
  btrfs: root->fs_info cleanup, update_block_group{,flags}
  btrfs: root->fs_info cleanup, lock/unlock_chunks
  btrfs: root->fs_info cleanup, btrfs_calc_{trans,trunc}_metadata_size
  btrfs: pull node/sector/stripe sizes out of root and into fs_info
  btrfs: root->fs_info cleanup, io_ctl_init
  btrfs: root->fs_info cleanup, use fs_info->dev_root everywhere
  btrfs: struct reada_control.root -> reada_control.fs_info
  btrfs: struct btrfsic_state->root should be an fs_info
  btrfs: alloc_reserved_file_extent trace point should use extent_root
  ...

Pull nfsd updates from Bruce Fields:
 "The one new feature is support for a new NFSv4.2 mode_umask attribute
  that makes ACL inheritance a little more useful in environments that
  default to restrictive umasks. Requires client-side support, also on
  its way for 4.10.

  Other than that, miscellaneous smaller fixes and cleanup, especially
  to the server rdma code"

[ The client side of the umask attribute was merged yesterday ]

* tag 'nfsd-4.10' of git://linux-nfs.org/~bfields/linux:
  nfsd: add support for the umask attribute
  sunrpc: use DEFINE_SPINLOCK()
  svcrdma: Further clean-up of svc_rdma_get_inv_rkey()
  svcrdma: Break up dprintk format in svc_rdma_accept()
  svcrdma: Remove unused variable in rdma_copy_tail()
  svcrdma: Remove unused variables in xprt_rdma_bc_allocate()
  svcrdma: Remove svc_rdma_op_ctxt::wc_status
  svcrdma: Remove DMA map accounting
  svcrdma: Remove BH-disabled spin locking in svc_rdma_send()
  svcrdma: Renovate sendto chunk list parsing
  svcauth_gss: Close connection when dropping an incoming message
  svcrdma: Clear xpt_bc_xps in xprt_setup_rdma_bc() error exit arm
  nfsd: constify reply_cache_stats_operations structure
  nfsd: update workqueue creation
  sunrpc: GFP_KERNEL should be GFP_NOFS in crypto code
  nfsd: catch errors in decode_fattr earlier
  nfsd: clean up supported attribute handling
  nfsd: fix error handling for clients that fail to return the layout
  nfsd: more robust allocation failure handling in nfsd_reply_cache_init

Pull vfs updates from Al Viro:

 - more ->d_init() stuff (work.dcache)

 - pathname resolution cleanups (work.namei)

 - a few missing iov_iter primitives - copy_from_iter_full() and
   friends. Either copy the full requested amount, advance the iterator
   and return true, or fail, return false and do _not_ advance the
   iterator. Quite a few open-coded callers converted (and became more
   readable and harder to fuck up that way) (work.iov_iter)

 - several assorted patches, the big one being logfs removal

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  logfs: remove from tree
  vfs: fix put_compat_statfs64() does not handle errors
  namei: fold should_follow_link() with the step into not-followed link
  namei: pass both WALK_GET and WALK_MORE to should_follow_link()
  namei: invert WALK_PUT logics
  namei: shift interpretation of LOOKUP_FOLLOW inside should_follow_link()
  namei: saner calling conventions for mountpoint_last()
  namei.c: get rid of user_path_parent()
  switch getfrag callbacks to ..._full() primitives
  make skb_add_data,{_nocache}() and skb_copy_to_page_nocache() advance only on success
  [iov_iter] new primitives - copy_from_iter_full() and friends
  don't open-code file_inode()
  ceph: switch to use of ->d_init()
  ceph: unify dentry_operations instances
  lustre: switch to use of ->d_init()

Pull media updates from Mauro Carvalho Chehab:

 - new Mediatek drivers: mtk-mdp and mtk-vcodec

 - some additions at the media documentation

 - the CEC core and drivers were promoted from staging to mainstream

 - some cleanups at the DVB core

 - the LIRC serial driver got promoted from staging to mainstream

 - added a driver for Renesas R-Car FDP1 driver

 - add DVBv5 statistics support to mn88473 driver

 - several fixes related to printk continuation lines

 - add support for HSV encoding formats

 - lots of other cleanups, fixups and driver improvements.

* tag 'media/v4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (496 commits)
  [media] v4l: tvp5150: Add missing break in set control handler
  [media] v4l: tvp5150: Don't inline the tvp5150_selmux() function
  [media] v4l: tvp5150: Compile tvp5150_link_setup out if !CONFIG_MEDIA_CONTROLLER
  [media] em28xx: don't store usb_device at struct em28xx
  [media] em28xx: use usb_interface for dev_foo() calls
  [media] em28xx: don't change the device's name
  [media] mn88472: fix chip id check on probe
  [media] mn88473: fix chip id check on probe
  [media] lirc: fix error paths in lirc_cdev_add()
  [media] s5p-mfc: Add support for MFC v8 available in Exynos 5433 SoCs
  [media] s5p-mfc: Rework clock handling
  [media] s5p-mfc: Don't keep clock prepared all the time
  [media] s5p-mfc: Kill all IS_ERR_OR_NULL in clocks management code
  [media] s5p-mfc: Remove dead conditional code
  [media] s5p-mfc: Ensure that clock is disabled before turning power off
  [media] s5p-mfc: Remove special clock rate management
  [media] s5p-mfc: Use printk_ratelimited for reporting ioctl errors
  [media] s5p-mfc: Set DMA_ATTR_ALLOC_SINGLE_PAGES
  [media] vivid: Set color_enc on HSV formats
  [media] v4l2-tpg: Init hv_enc field with a valid value
  ...

Pull edac updates from Mauro Carvalho Chehab:
 "This contains the conversion of the EDAC uAPI documentation to ReST
  and the addition of the EDAC kAPI documentation to the driver-api
  docs.

  It also splits the EDAC headers by their functions"

* tag 'edac/v4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac:
  EDAC: Document HW_EVENT_ERR_DEFERRED type
  edac.rst: move concepts dictionary from edac.h
  edac: fix kenel-doc markups at edac.h
  edac: fix kernel-doc tags at the drivers/edac_*.h
  edac: adjust docs location at MAINTAINERS and 00-INDEX
  driver-api: create an edac.rst file with EDAC documentation
  edac: move documentation from edac_mc.c to edac_core.h
  edac: move documentation from edac_pci*.c to edac_pci.h
  edac: move documentation from edac_device to edac_core.h
  edac: rename edac_core.h to edac_mc.h
  edac: move EDAC device definitions to drivers/edac/edac_device.h
  edac: move EDAC PCI definitions to drivers/edac/edac_pci.h
  docs-rst: admin-guide: add documentation for EDAC
  edac.txt: Improve documentation, adding RAS introduction
  edac.txt: update information about newer Intel CPUs
  edac.txt: remove info that the Nehalem EDAC is experimental
  edac.txt: convert EDAC documentation to ReST
  edac.txt: add a section explaining the dimmX and rankX directories
  edac: edac_core.h: remove prototype for edac_pci_reset_delay_period()
  edac: edac_core.h: get rid of unused kobj_complete

Pull UML update from Richard Weinberger:
 "A performance enhancement for UML's block driver"

* 'for-linus-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: UBD Improvements

Pull arch/nios2 updates from Ley Foon Tan:

 - add screen_info

 - Convert pfn_valid to static inline

 - Extend !__ASSEMBLY__ section in asm/page.h

* tag 'nios2-v4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2:
  nios2: add screen_info
  nios2: Convert pfn_valid to static inline
  nios2: Extend !__ASSEMBLY__ section in asm/page.h

Pull powerpc updates from Michael Ellerman:
 "Highlights include:

   - Support for the kexec_file_load() syscall, which is a prereq for
     secure and trusted boot.

   - Prevent kernel execution of userspace on P9 Radix (similar to
     SMEP/PXN).

   - Sort the exception tables at build time, to save time at boot, and
     store them as relative offsets to save space in the kernel image &
     memory.

   - Allow building the kernel with thin archives, which should allow us
     to build an allyesconfig once some other fixes land.

   - Build fixes to allow us to correctly rebuild when changing the
     kernel endian from big to little or vice versa.

   - Plumbing so that we can avoid doing a full mm TLB flush on P9
     Radix.

   - Initial stack protector support (-fstack-protector).

   - Support for dumping the radix (aka. Linux) and hash page tables via
     debugfs.

   - Fix an oops in cxl coredump generation when cxl_get_fd() is used.

   - Freescale updates from Scott: "Highlights include 8xx hugepage
     support, qbman fixes/cleanup, device tree updates, and some misc
     cleanup."

   - Many and varied fixes and minor enhancements as always.

  Thanks to:
    Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Anshuman
    Khandual, Anton Blanchard, Balbir Singh, Bartlomiej Zolnierkiewicz,
    Christophe Jaillet, Christophe Leroy, Denis Kirjanov, Elimar
    Riesebieter, Frederic Barrat, Gautham R. Shenoy, Geliang Tang, Geoff
    Levand, Jack Miller, Johan Hovold, Lars-Peter Clausen, Libin,
    Madhavan Srinivasan, Michael Neuling, Nathan Fontenot, Naveen N.
    Rao, Nicholas Piggin, Pan Xinhui, Peter Senna Tschudin, Rashmica
    Gupta, Rui Teng, Russell Currey, Scott Wood, Simon Guo, Suraj
    Jitindar Singh, Thiago Jung Bauermann, Tobias Klauser, Vaibhav Jain"

[ And thanks to Michael, who took time off from a new baby to get this
  pull request done.   - Linus ]

* tag 'powerpc-4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (174 commits)
  powerpc/fsl/dts: add FMan node for t1042d4rdb
  powerpc/fsl/dts: add sg_2500_aqr105_phy4 alias on t1024rdb
  powerpc/fsl/dts: add QMan and BMan nodes on t1024
  powerpc/fsl/dts: add QMan and BMan nodes on t1023
  soc/fsl/qman: test: use DEFINE_SPINLOCK()
  powerpc/fsl-lbc: use DEFINE_SPINLOCK()
  powerpc/8xx: Implement support of hugepages
  powerpc: get hugetlbpage handling more generic
  powerpc: port 64 bits pgtable_cache to 32 bits
  powerpc/boot: Request no dynamic linker for boot wrapper
  soc/fsl/bman: Use resource_size instead of computation
  soc/fsl/qe: use builtin_platform_driver
  powerpc/fsl_pmc: use builtin_platform_driver
  powerpc/83xx/suspend: use builtin_platform_driver
  powerpc/ftrace: Fix the comments for ftrace_modify_code
  powerpc/perf: macros for power9 format encoding
  powerpc/perf: power9 raw event format encoding
  powerpc/perf: update attribute_group data structure
  powerpc/perf: factor out the event format field
  powerpc/mm/iommu, vfio/spapr: Put pages on VFIO container shutdown
  ...

Pull m ore s390 updates from Martin Schwidefsky:
 "Over 95% of the changes in this pull request are related to the zcrypt
  driver. There are five improvements for zcrypt: the ID for the CEX6
  cards is added, workload balancing and multi-domain support are
  introduced, the debug logs are overhauled and a set of tracepoints is
  added.

  Then there are several patches in regard to inline assemblies. One
  compile fix and several missing memory clobbers. As far as we can tell
  the omitted memory clobbers have not caused any breakage.

  A small change to the PCI arch code, the machine can tells us how big
  the function measurement blocks are. The PCI function measurement will
  be disabled for a device if the queried length is larger than the
  allocated size for these blocks.

  And two more patches to correct five printk messages.

  That is it for s390 in regard to the 4.10 merge window. Happy holidays"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (23 commits)
  s390/pci: query fmb length
  s390/zcrypt: add missing memory clobber to ap_qci inline assembly
  s390/extmem: add missing memory clobber to dcss_set_subcodes
  s390/nmi: fix inline assembly constraints
  s390/lib: add missing memory barriers to string inline assemblies
  s390/cpumf: fix qsi inline assembly
  s390/setup: reword printk messages
  s390/dasd: fix typos in DASD error messages
  s390: fix compile error with memmove_early() inline assembly
  s390/zcrypt: tracepoint definitions for zcrypt device driver.
  s390/zcrypt: Rework debug feature invocations.
  s390/zcrypt: Improved invalid domain response handling.
  s390/zcrypt: Fix ap_max_domain_id for older machine types
  s390/zcrypt: Correct function bits for CEX2x and CEX3x cards.
  s390/zcrypt: Fixed attrition of AP adapters and domains
  s390/zcrypt: Introduce new zcrypt device status API
  s390/zcrypt: add multi domain support
  s390/zcrypt: Introduce workload balancing
  s390/zcrypt: get rid of ap_poll_requests
  s390/zcrypt: header for the AP inline assmblies
  ...

 - Fix broken long line block quote
 - Fix missing newline before bullets list
 - Use correct numbered list syntax
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

If kcalloc() failed, the return value of ovl_fill_super() is -EINVAL,
not -ENOMEM. So this patch sets this value to -ENOMEM before calling
kcalloc(), and sets it back to -EINVAL after calling kcalloc().
Signed-off-by: NGeliang Tang <geliangtang@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

FWIW, there's a bit of abuse of struct kstat in overlayfs object
creation paths - for one thing, it ends up with a very small subset
of struct kstat (mode + rdev), for another it also needs link in
case of symlinks and ends up passing it separately.

IMO it would be better to introduce a separate object for that.

In principle, we might even lift that thing into general API and switch
 ->mkdir()/->mknod()/->symlink() to identical calling conventions.  Hell
knows, perhaps ->create() as well...
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

This removes code duplication.
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

The benefit of making directories opaque on creation is that lookups can
stop short when they reach the original created directory, instead of
continue lookup the entire depth of parent directory stack.

The best case is overlay with N layers, performing lookup for first level
directory, which exists only in upper.  In that case, there will be only
one lookup instead of N.
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

oe->opaque is set for

 a) whiteouts
 b) directories having the "trusted.overlay.opaque" xattr

Case b can be simplified, since setting the xattr always implies setting
oe->opaque.  Also once set, the opaque flag is never cleared.

Don't need to set opaque flag for non-directories.
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Show the value of redirect_dir in /proc/mounts.
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Add a module option to allow tuning the max size of absolute redirects.
Default is 256.

Size of relative redirects is naturally limited by the the underlying
filesystem's max filename length (usually 255).
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

This patch introduces a kernel config option and a module param.  Both can
be used independently to turn the default value of redirect_dir on or off.
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Before introducing redirect_dir feature, the condition
!ovl_lower_positive(dentry) for a directory, implied that it is a pure
upper directory, which may be removed if empty.

Now that directory can be redirect, it is possible that upper does not
cover any lower (i.e. !ovl_lower_positive(dentry)), but the directory is a
merge (with redirected path) and maybe non empty.

Check for this case in ovl_remove_upper().

This change fixes the following test case from rename-pop-dir.py
of unionmount-testsuite:

    """Remove dir and rename old name"""
    d = ctx.non_empty_dir()
    d2 = ctx.no_dir()

    ctx.rmdir(d, err=ENOTEMPTY)
    ctx.rename(d, d2)
    ctx.rmdir(d, err=ENOENT)
    ctx.rmdir(d2, err=ENOTEMPTY)

./run --ov rename-pop-dir
/mnt/a/no_dir103: Expected error (Directory not empty) was not produced
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Current code returns EXDEV when a directory would need to be copied up to
move.  We could copy up the directory tree in this case, but there's
another, simpler solution: point to old lower directory from moved upper
directory.

This is achieved with a "trusted.overlay.redirect" xattr storing the path
relative to the root of the overlay.  After such attribute has been set,
the directory can be moved without further actions required.

This is a backward incompatible feature, old kernels won't be able to
correctly mount an overlay containing redirected directories.
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

If a directory has the "trusted.overlay.redirect" xattr, it means that the
value of the xattr should be used to find the underlying directory on the
next lower layer.

The redirect may be relative or absolute.  Absolute redirects begin with a
slash.

A relative redirect means: instead of the current dentry's name use the
value of the redirect to find the directory in the next lower
layer. Relative redirects must not contain a slash.

An absolute redirect means: look up the directory relative to the root of
the overlay using the value of the redirect in the next lower layer.

Redirects work on lower layers as well.
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Use a common helper for lookup of upper and lower layers.  This paves the
way for looking up directory redirects.

No functional change.
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

When the upper overlayfs checks "trusted.overlay.*" xattr on the underlying
overlayfs mount, it gets -EPERM, which confuses the upper overlayfs.

Fix this by returning -EOPNOTSUPP instead of -EPERM from
ovl_own_xattr_get() and ovl_own_xattr_set().  This behavior is consistent
with the behavior of ovl_listxattr(), which filters out the private
overlayfs xattrs.

Note: nested overlays are deprecated.  But this change makes sense
regardless: these xattrs are private to the overlay and should always be
hidden.  Hence getting and setting them should indicate this.

[SzMi: Use EOPNOTSUPP instead of ENODATA and use it for both getting and
setting "trusted.overlay." xattrs.  This is a perfectly valid error code
for "we don't support this prefix", which is the case here.]
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

We already calculate f_namelen in statfs as the maximum of the name lengths
provided by the filesystems taking part in the overlay.
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

fs/overlayfs/super.c is the biggest of the overlayfs source files and it
contains various utility functions as well as the rather complicated lookup
code.  Split these parts out to separate files.

Before:

 1446 fs/overlayfs/super.c

After:

  919 fs/overlayfs/super.c
  267 fs/overlayfs/namei.c
  235 fs/overlayfs/util.c
   51 fs/overlayfs/ovl_entry.h
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

If encountering a non-directory, then stop looking at lower layers.

In this case the oe->opaque flag is not set anymore, which doesn't matter
since existence of lower file is now checked at remove/rename time.
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Check if something exists on the lower layer(s) under the target or rename
to decide if directory needs to be marked "opaque".

Marking opaque is done before the rename, and on failure the marking was
undone.  Also the opaque xattr was removed if the target didn't cover
anything.

This patch changes behavior so that removal of "opaque" is not done in
either of the above cases.  This means that directory may have the opaque
flag even if it doesn't cover anything.  However this shouldn't affect the
performance or semantics of the overalay, while simplifying the code.
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

d_is_dir() is safe to call on a negative dentry.  Use this fact to simplify
handling of the lower or merged directories.
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

The remainging uses of __OVL_PATH_PURE can be replaced by
ovl_dentry_is_opaque().
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Currently ovl_lookup() checks existence of lower file even if there's a
non-directory on upper (which is always opaque).  This is done so that
remove can decide whether a whiteout is needed or not.

It would be better to defer this check to unlink, since most of the time
the gathered information about opaqueness will be unused.

This adds a helper ovl_lower_positive() that checks if there's anything on
the lower layer(s).

The following patches also introduce changes to how the "opaque" attribute
is updated on directories: this attribute is added when the directory is
creted or moved over a whiteout or object covering something on the lower
layer.  However following changes will allow the attribute to remain on the
directory after being moved, even if the new location doesn't cover
anything.  Because of this, we need to check lower layers even for opaque
directories, so that whiteout is only created when necessary.

This function will later be also used to decide about marking a directory
opaque, so deal with negative dentries as well.  When dealing with
negative, it's enough to check for being a whiteout

If the dentry is positive but not upper then it also obviously needs
whiteout/opaque.
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

And use it instead of ovl_dentry_is_opaque() where appropriate.
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Since commit 07a2daab ("ovl: Copy up underlying inode's ->i_mode to
overlay inode") sticky checking on overlay inode is performed by the vfs,
so checking against sticky on underlying inode is not needed.
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

This is redundant, the vfs already performed this check (and was broken,
see commit 9409e22a ("vfs: rename: check backing inode being equal")).
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

No sense in opening special files on the underlying layers, they work just
as well if opened on the overlay.

Side effect is that it's no longer possible to connect one side of a pipe
opened on overlayfs with the other side opened on the underlying layer.
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>