1. 27 4月, 2018 3 次提交
    • W
      udp: generate gso with UDP_SEGMENT · bec1f6f6
      Willem de Bruijn 提交于
      Support generic segmentation offload for udp datagrams. Callers can
      concatenate and send at once the payload of multiple datagrams with
      the same destination.
      
      To set segment size, the caller sets socket option UDP_SEGMENT to the
      length of each discrete payload. This value must be smaller than or
      equal to the relevant MTU.
      
      A follow-up patch adds cmsg UDP_SEGMENT to specify segment size on a
      per send call basis.
      
      Total byte length may then exceed MTU. If not an exact multiple of
      segment size, the last segment will be shorter.
      
      The implementation adds a gso_size field to the udp socket, ip(v6)
      cmsg cookie and inet_cork structure to be able to set the value at
      setsockopt or cmsg time and to work with both lockless and corked
      paths.
      
      Initial benchmark numbers show UDP GSO about as expensive as TCP GSO.
      
          tcp tso
           3197 MB/s 54232 msg/s 54232 calls/s
               6,457,754,262      cycles
      
          tcp gso
           1765 MB/s 29939 msg/s 29939 calls/s
              11,203,021,806      cycles
      
          tcp without tso/gso *
            739 MB/s 12548 msg/s 12548 calls/s
              11,205,483,630      cycles
      
          udp
            876 MB/s 14873 msg/s 624666 calls/s
              11,205,777,429      cycles
      
          udp gso
           2139 MB/s 36282 msg/s 36282 calls/s
              11,204,374,561      cycles
      
         [*] after reverting commit 0a6b2a1d
             ("tcp: switch to GSO being always on")
      
      Measured total system cycles ('-a') for one core while pinning both
      the network receive path and benchmark process to that core:
      
        perf stat -a -C 12 -e cycles \
          ./udpgso_bench_tx -C 12 -4 -D "$DST" -l 4
      
      Note the reduction in calls/s with GSO. Bytes per syscall drops
      increases from 1470 to 61818.
      Signed-off-by: NWillem de Bruijn <willemb@google.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      bec1f6f6
    • W
      udp: add udp gso · ee80d1eb
      Willem de Bruijn 提交于
      Implement generic segmentation offload support for udp datagrams. A
      follow-up patch adds support to the protocol stack to generate such
      packets.
      
      UDP GSO is not UFO. UFO fragments a single large datagram. GSO splits
      a large payload into a number of discrete UDP datagrams.
      
      The implementation adds a GSO type SKB_UDP_GSO_L4 to differentiate it
      from UFO (SKB_UDP_GSO).
      
      IPPROTO_UDPLITE is excluded, as that protocol has no gso handler
      registered.
      
      [ Export __udp_gso_segment for ipv6. -DaveM ]
      Signed-off-by: NWillem de Bruijn <willemb@google.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      ee80d1eb
    • W
      udp: expose inet cork to udp · 1cd7884d
      Willem de Bruijn 提交于
      UDP segmentation offload needs access to inet_cork in the udp layer.
      Pass the struct to ip(6)_make_skb instead of allocating it on the
      stack in that function itself.
      
      This patch is a noop otherwise.
      Signed-off-by: NWillem de Bruijn <willemb@google.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      1cd7884d
  2. 26 4月, 2018 4 次提交
  3. 25 4月, 2018 7 次提交
  4. 24 4月, 2018 6 次提交
  5. 23 4月, 2018 5 次提交
  6. 22 4月, 2018 4 次提交
  7. 21 4月, 2018 3 次提交
    • A
      kasan: add no_sanitize attribute for clang builds · 12c8f25a
      Andrey Konovalov 提交于
      KASAN uses the __no_sanitize_address macro to disable instrumentation of
      particular functions.  Right now it's defined only for GCC build, which
      causes false positives when clang is used.
      
      This patch adds a definition for clang.
      
      Note, that clang's revision 329612 or higher is required.
      
      [andreyknvl@google.com: remove redundant #ifdef CONFIG_KASAN check]
        Link: http://lkml.kernel.org/r/c79aa31a2a2790f6131ed607c58b0dd45dd62a6c.1523967959.git.andreyknvl@google.com
      Link: http://lkml.kernel.org/r/4ad725cc903f8534f8c8a60f0daade5e3d674f8d.1523554166.git.andreyknvl@google.comSigned-off-by: NAndrey Konovalov <andreyknvl@google.com>
      Acked-by: NAndrey Ryabinin <aryabinin@virtuozzo.com>
      Cc: Alexander Potapenko <glider@google.com>
      Cc: Dmitry Vyukov <dvyukov@google.com>
      Cc: David Rientjes <rientjes@google.com>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Ingo Molnar <mingo@kernel.org>
      Cc: David Woodhouse <dwmw@amazon.co.uk>
      Cc: Andrey Konovalov <andreyknvl@google.com>
      Cc: Will Deacon <will.deacon@arm.com>
      Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
      Cc: Paul Lawrence <paullawrence@google.com>
      Cc: Sandipan Das <sandipan@linux.vnet.ibm.com>
      Cc: Kees Cook <keescook@chromium.org>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      12c8f25a
    • G
      writeback: safer lock nesting · 2e898e4c
      Greg Thelen 提交于
      lock_page_memcg()/unlock_page_memcg() use spin_lock_irqsave/restore() if
      the page's memcg is undergoing move accounting, which occurs when a
      process leaves its memcg for a new one that has
      memory.move_charge_at_immigrate set.
      
      unlocked_inode_to_wb_begin,end() use spin_lock_irq/spin_unlock_irq() if
      the given inode is switching writeback domains.  Switches occur when
      enough writes are issued from a new domain.
      
      This existing pattern is thus suspicious:
          lock_page_memcg(page);
          unlocked_inode_to_wb_begin(inode, &locked);
          ...
          unlocked_inode_to_wb_end(inode, locked);
          unlock_page_memcg(page);
      
      If both inode switch and process memcg migration are both in-flight then
      unlocked_inode_to_wb_end() will unconditionally enable interrupts while
      still holding the lock_page_memcg() irq spinlock.  This suggests the
      possibility of deadlock if an interrupt occurs before unlock_page_memcg().
      
          truncate
          __cancel_dirty_page
          lock_page_memcg
          unlocked_inode_to_wb_begin
          unlocked_inode_to_wb_end
          <interrupts mistakenly enabled>
                                          <interrupt>
                                          end_page_writeback
                                          test_clear_page_writeback
                                          lock_page_memcg
                                          <deadlock>
          unlock_page_memcg
      
      Due to configuration limitations this deadlock is not currently possible
      because we don't mix cgroup writeback (a cgroupv2 feature) and
      memory.move_charge_at_immigrate (a cgroupv1 feature).
      
      If the kernel is hacked to always claim inode switching and memcg
      moving_account, then this script triggers lockup in less than a minute:
      
        cd /mnt/cgroup/memory
        mkdir a b
        echo 1 > a/memory.move_charge_at_immigrate
        echo 1 > b/memory.move_charge_at_immigrate
        (
          echo $BASHPID > a/cgroup.procs
          while true; do
            dd if=/dev/zero of=/mnt/big bs=1M count=256
          done
        ) &
        while true; do
          sync
        done &
        sleep 1h &
        SLEEP=$!
        while true; do
          echo $SLEEP > a/cgroup.procs
          echo $SLEEP > b/cgroup.procs
        done
      
      The deadlock does not seem possible, so it's debatable if there's any
      reason to modify the kernel.  I suggest we should to prevent future
      surprises.  And Wang Long said "this deadlock occurs three times in our
      environment", so there's more reason to apply this, even to stable.
      Stable 4.4 has minor conflicts applying this patch.  For a clean 4.4 patch
      see "[PATCH for-4.4] writeback: safer lock nesting"
      https://lkml.org/lkml/2018/4/11/146
      
      Wang Long said "this deadlock occurs three times in our environment"
      
      [gthelen@google.com: v4]
        Link: http://lkml.kernel.org/r/20180411084653.254724-1-gthelen@google.com
      [akpm@linux-foundation.org: comment tweaks, struct initialization simplification]
      Change-Id: Ibb773e8045852978f6207074491d262f1b3fb613
      Link: http://lkml.kernel.org/r/20180410005908.167976-1-gthelen@google.com
      Fixes: 682aa8e1 ("writeback: implement unlocked_inode_to_wb transaction and use it for stat updates")
      Signed-off-by: NGreg Thelen <gthelen@google.com>
      Reported-by: NWang Long <wanglong19@meituan.com>
      Acked-by: NWang Long <wanglong19@meituan.com>
      Acked-by: NMichal Hocko <mhocko@suse.com>
      Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
      Cc: Johannes Weiner <hannes@cmpxchg.org>
      Cc: Tejun Heo <tj@kernel.org>
      Cc: Nicholas Piggin <npiggin@gmail.com>
      Cc: <stable@vger.kernel.org>	[v4.2+]
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      2e898e4c
    • K
      fork: unconditionally clear stack on fork · e01e8063
      Kees Cook 提交于
      One of the classes of kernel stack content leaks[1] is exposing the
      contents of prior heap or stack contents when a new process stack is
      allocated.  Normally, those stacks are not zeroed, and the old contents
      remain in place.  In the face of stack content exposure flaws, those
      contents can leak to userspace.
      
      Fixing this will make the kernel no longer vulnerable to these flaws, as
      the stack will be wiped each time a stack is assigned to a new process.
      There's not a meaningful change in runtime performance; it almost looks
      like it provides a benefit.
      
      Performing back-to-back kernel builds before:
      	Run times: 157.86 157.09 158.90 160.94 160.80
      	Mean: 159.12
      	Std Dev: 1.54
      
      and after:
      	Run times: 159.31 157.34 156.71 158.15 160.81
      	Mean: 158.46
      	Std Dev: 1.46
      
      Instead of making this a build or runtime config, Andy Lutomirski
      recommended this just be enabled by default.
      
      [1] A noisy search for many kinds of stack content leaks can be seen here:
      https://cve.mitre.org/cgi-bin/cvekey.cgi?keyword=linux+kernel+stack+leak
      
      I did some more with perf and cycle counts on running 100,000 execs of
      /bin/true.
      
      before:
      Cycles: 218858861551 218853036130 214727610969 227656844122 224980542841
      Mean:  221015379122.60
      Std Dev: 4662486552.47
      
      after:
      Cycles: 213868945060 213119275204 211820169456 224426673259 225489986348
      Mean:  217745009865.40
      Std Dev: 5935559279.99
      
      It continues to look like it's faster, though the deviation is rather
      wide, but I'm not sure what I could do that would be less noisy.  I'm
      open to ideas!
      
      Link: http://lkml.kernel.org/r/20180221021659.GA37073@beastSigned-off-by: NKees Cook <keescook@chromium.org>
      Acked-by: NMichal Hocko <mhocko@suse.com>
      Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
      Cc: Andy Lutomirski <luto@kernel.org>
      Cc: Laura Abbott <labbott@redhat.com>
      Cc: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
      Cc: Mel Gorman <mgorman@techsingularity.net>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      e01e8063
  8. 20 4月, 2018 8 次提交