- 05 6月, 2013 1 次提交
-
-
由 Li RongQing 提交于
This corrects an regression introduced by "net: Use 16bits for *_headers fields of struct skbuff" when NET_SKBUFF_DATA_USES_OFFSET is not set. In that case skb->tail will be a pointer whereas skb->transport_header will be an offset from head. This is corrected by using wrappers that ensure that comparisons and calculations are always made using pointers. Cc: Simon Horman <horms@verge.net.au> Signed-off-by: NLi RongQing <roy.qing.li@gmail.com> Reviewed-by: NSimon Horman <horms@verge.net.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 4月, 2013 1 次提交
-
-
由 Patrick McHardy 提交于
Add a protocol argument to the VLAN packet tagging functions. In case of HW tagging, we need that protocol available in the ndo_start_xmit functions, so it is stored in a new field in the skb. The new field fits into a hole (on 64 bit) and doesn't increase the sks's size. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 3月, 2013 2 次提交
-
-
由 Santosh Rastapur 提交于
This patch implements a low latency Write Combining (aka Write Coalescing) work request path. PCIE maps User Space Doorbell BAR2 region writes to the new interface to SGE. SGE pulls a new message from PCIE new interface and if its a coalesced write work request then pushes it for processing. This patch copies coalesced work request to memory mapped BAR2 space. Signed-off-by: NSantosh Rastapur <santosh@chelsio.com> Signed-off-by: NVipul Pandya <vipul@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Santosh Rastapur 提交于
Signed-off-by: NSantosh Rastapur <santosh@chelsio.com> Signed-off-by: NVipul Pandya <vipul@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 11月, 2012 1 次提交
-
-
由 Naresh Kumar Inna 提交于
This patch contains updates to firmware/hardware header files shared between csiostor and cxgb4/cxgb4vf, and the resulting changes to the cxgb4/cxgb4vf source files. Signed-off-by: NNaresh Kumar Inna <naresh@chelsio.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
- 28 9月, 2012 1 次提交
-
-
由 Vipul Pandya 提交于
This patch adds new enums and macros to enable T4 configuration file support. It also removes duplicate macro definitions. It fixes the build failure in cxgb4vf driver introduced because of old macro definition removal. It also performs SGE initialization based on T4 configuration file is provided or not. If it is provided then it uses the parameters provided in it otherwise it uses hard coded values. Signed-off-by: NJay Hernandez <jay@chelsio.com> Signed-off-by: NVipul Pandya <vipul@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 9月, 2012 1 次提交
-
-
由 Vipul Pandya 提交于
Removed duplicate definition for SGE_PF_KDOORBELL, SGE_INT_ENABLE3, PCIE_MEM_ACCESS_OFFSET registers. Moved the register field definitions around the register definition. Signed-off-by: NSantosh Rastapur <santosh@chelsio.com> Signed-off-by: NVipul Pandya <vipul@chelsio.com> Reviewed-by: NSivakumar Subramani <sivasu@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 8月, 2012 1 次提交
-
-
由 Mel Gorman 提交于
The skb->pfmemalloc flag gets set to true iff during the slab allocation of data in __alloc_skb that the the PFMEMALLOC reserves were used. If page splitting is used, it is possible that pages will be allocated from the PFMEMALLOC reserve without propagating this information to the skb. This patch propagates page->pfmemalloc from pages allocated for fragments to the skb. It works by reintroducing and expanding the skb_alloc_page() API to take an skb. If the page was allocated from pfmemalloc reserves, it is automatically copied. If the driver allocates the page before the skb, it should call skb_propagate_pfmemalloc() after the skb is allocated to ensure the flag is copied properly. Failure to do so is not critical. The resulting driver may perform slower if it is used for swap-over-NBD or swap-over-NFS but it should not result in failure. [davem@davemloft.net: API rename and consistency] Signed-off-by: NMel Gorman <mgorman@suse.de> Acked-by: NDavid S. Miller <davem@davemloft.net> Cc: Neil Brown <neilb@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: Eric B Munson <emunson@mgebm.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Cc: Mel Gorman <mgorman@suse.de> Cc: Christoph Lameter <cl@linux.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 07 6月, 2012 1 次提交
-
-
由 Joe Perches 提交于
Adding casts of objects to the same type is unnecessary and confusing for a human reader. For example, this cast: int y; int *p = (int *)&y; I used the coccinelle script below to find and remove these unnecessary casts. I manually removed the conversions this script produces of casts with __force, __iomem and __user. @@ type T; T *p; @@ - (T *)p + p A function in atl1e_main.c was passed a const pointer when it actually modified elements of the structure. Change the argument to a non-const pointer. A function in stmmac needed a __force to avoid a sparse warning. Added it. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 5月, 2012 2 次提交
-
-
由 Vipul Pandya 提交于
recover LLD EQs for DB drop interrupts. This includes adding a new db_lock, a spin lock disabling BH too, used by the recovery thread and the ring_tx_db() paths to allow db drop recovery. Clean up initial DB avoidance code. Add read_eq_indices() - this allows the LLD to use the PCIe mw to efficiently read hw eq contexts. Add cxgb4_sync_txq_pidx() - called by iw_cxgb4 to sync up the sw/hw pidx value. Add flush_eq_cache() and cxgb4_flush_eq_cache(). This allows iw_cxgb4 to flush the sge eq context cache before beginning db drop recovery. Add module parameter, dbfoifo_int_thresh, to allow tuning the db interrupt threshold value. Add dbfifo_int_thresh to cxgb4_lld_info so iw_cxgb4 knows the threshold. Add module parameter, dbfoifo_drain_delay, to allow tuning the amount of time delay between DB FULL and EMPTY upcalls to iw_cxgb4. Signed-off-by: NVipul Pandya <vipul@chelsio.com> Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Vipul Pandya 提交于
Signed-off-by: NVipul Pandya <vipul@chelsio.com> Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
- 23 11月, 2011 1 次提交
-
-
由 Eric Dumazet 提交于
Given we dont use anymore the struct net_device *dev argument, and this interface brings litle benefit, remove netdev_{alloc|free}_page(), to debloat include/linux/skbuff.h a bit. (Some drivers used a mix of these interfaces and alloc_pages()) When allocating a page given to device for DMA transfer (device to memory), it makes sense to use a cold one (__GFP_COLD) Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com> CC: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 11月, 2011 1 次提交
-
-
由 Paul Gortmaker 提交于
These were getting the macros from an implicit module.h include via device.h, but we are planning to clean that up. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> drivers/net: Add export.h to wireless/brcm80211/brcmfmac/bcmsdh.c This relatively recently added file uses EXPORT_SYMBOL and hence needs export.h included so that it is compatible with the module.h split up work. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
- 21 10月, 2011 1 次提交
-
-
由 Ian Campbell 提交于
Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Cc: Dimitris Michailidis <dm@chelsio.com> Cc: netdev@vger.kernel.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 10月, 2011 1 次提交
-
-
由 Eric Dumazet 提交于
To ease skb->truesize sanitization, its better to be able to localize all references to skb frags size. Define accessors : skb_frag_size() to fetch frag size, and skb_frag_size_{set|add|sub}() to manipulate it. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 8月, 2011 1 次提交
-
-
由 Jeff Kirsher 提交于
Moves the drivers for the Chelsio chipsets into drivers/net/ethernet/chelsio/ and the necessary Kconfig and Makefile changes. CC: Divy Le Ray <divy@chelsio.com> CC: Dimitris Michailidis <dm@chelsio.com> CC: Casey Leedom <leedom@chelsio.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 23 5月, 2011 2 次提交
-
-
由 Paul Gortmaker 提交于
After discovering that wide use of prefetch on modern CPUs could be a net loss instead of a win, net drivers which were relying on the implicit inclusion of prefetch.h via the list headers showed up in the resulting cleanup fallout. Give them an explicit include via the following $0.02 script. ========================================= #!/bin/bash MANUAL="" for i in `git grep -l 'prefetch(.*)' .` ; do grep -q '<linux/prefetch.h>' $i if [ $? = 0 ] ; then continue fi ( echo '?^#include <linux/?a' echo '#include <linux/prefetch.h>' echo . echo w echo q ) | ed -s $i > /dev/null 2>&1 if [ $? != 0 ]; then echo $i needs manual fixup MANUAL="$i $MANUAL" fi done echo ------------------- 8\<---------------------- echo vi $MANUAL ========================================= Signed-off-by: NPaul <paul.gortmaker@windriver.com> [ Fixed up some incorrect #include placements, and added some non-network drivers and the fib_trie.c case - Linus ] Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Paul Gortmaker 提交于
After discovering that wide use of prefetch on modern CPUs could be a net loss instead of a win, net drivers which were relying on the implicit inclusion of prefetch.h via the list headers showed up in the resulting cleanup fallout. Give them an explicit include via the following $0.02 script. ========================================= #!/bin/bash MANUAL="" for i in `git grep -l 'prefetch(.*)' .` ; do grep -q '<linux/prefetch.h>' $i if [ $? = 0 ] ; then continue fi ( echo '?^#include <linux/?a' echo '#include <linux/prefetch.h>' echo . echo w echo q ) | ed -s $i > /dev/null 2>&1 if [ $? != 0 ]; then echo $i needs manual fixup MANUAL="$i $MANUAL" fi done echo ------------------- 8\<---------------------- echo vi $MANUAL ========================================= Signed-off-by: NPaul <paul.gortmaker@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 4月, 2011 1 次提交
-
-
由 Michał Mirosław 提交于
Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: NDimitris Michailidis <dm@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 12月, 2010 2 次提交
-
-
由 Dimitris Michailidis 提交于
Allocate Tx queue memory on the node indicated by the new netdev_queue_numa_node_read. Signed-off-by: NDimitris Michailidis <dm@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dimitris Michailidis 提交于
Enable relaxed ordering for descriptor reads and packet I/O. Signed-off-by: NDimitris Michailidis <dm@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 10月, 2010 1 次提交
-
-
由 Dimitris Michailidis 提交于
Signed-off-by: NDimitris Michailidis <dm@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 9月, 2010 1 次提交
-
-
由 Eric Dumazet 提交于
fresh skbs have ip_summed set to CHECKSUM_NONE (0) We can avoid setting again skb->ip_summed to CHECKSUM_NONE in drivers. Introduce skb_checksum_none_assert() helper so that we keep this assertion documented in driver sources. Change most occurrences of : skb->ip_summed = CHECKSUM_NONE; by : skb_checksum_none_assert(skb); Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 8月, 2010 2 次提交
-
-
由 Dimitris Michailidis 提交于
Signed-off-by: NDimitris Michailidis <dm@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dimitris Michailidis 提交于
Currently the driver assumes that queue IDs start at 0 but that's true only for function 0. To support operation on other functions get the start of the queue ranges from FW and offset accordingly. Signed-off-by: NDimitris Michailidis <dm@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 8月, 2010 3 次提交
-
-
由 Dimitris Michailidis 提交于
Add support for running the driver on any PCI function. Mostly this entails replacing a constant 0 in a number of calls with the variable function number. Signed-off-by: NDimitris Michailidis <dm@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dimitris Michailidis 提交于
Commit 1704d748 ("cxgb4vf: small changes to message processing structures/macros") was incomplete and causes cxgb4 to write bad TSO descriptors. Fix that up by reverting the offending part of that commit and adjusting field accesses now that they are one level deeper. Signed-off-by: NDimitris Michailidis <dm@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dimitris Michailidis 提交于
The checksum provided by the device doesn't include the L3 headers, as IPv6 expects. Signed-off-by: NDimitris Michailidis <dm@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 6月, 2010 1 次提交
-
-
由 Casey Leedom 提交于
Split cpl_tx_pkt_lso into core message structure and encapsulated message, make RSPD_LEN macro match other response descriptor macros. Signed-off-by: Casey Leedom Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 4月, 2010 1 次提交
-
-
由 Dimitris Michailidis 提交于
Implement the ->set_flags ethtool method to control NETIF_F_RXHASH and set skb->rxhash to the HW calculated hash accordingly. Follow Eric Dumazet's suggestion and use the hash value raw. Signed-off-by: NDimitris Michailidis <dm@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 4月, 2010 2 次提交
-
-
由 Roland Dreier 提交于
Also put t4_write_indirect() inside "#if 0" to avoid a "defined but not used" compile warning. Signed-off-by: NRoland Dreier <rolandd@cisco.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Roland Dreier 提交于
Use the correct direction of byte-swapping function to fix a mistake shown by sparse endianness checking -- c.fl0id is __be16. Signed-off-by: NRoland Dreier <rolandd@cisco.com> Acked-by: NDimitris Michailidis <dm@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 4月, 2010 1 次提交
-
-
由 Dimitris Michailidis 提交于
Signed-off-by: NDimitris Michailidis <dm@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-