Just store the stuff directly into crtc_state->dpll_hw_state rather
than to a temp and copying the whole thing over.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190207173230.22368-4-ville.syrjala@linux.intel.comReviewed-by: NLucas De Marchi <lucas.demarchi@intel.com>

Simplify the calling convention of the skl dpll funcs by plumbing
the crtc state deeper.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190207173230.22368-3-ville.syrjala@linux.intel.comReviewed-by: NLucas De Marchi <lucas.demarchi@intel.com>

Passing both crtc and its state is redundant. Pass just the state.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190207173230.22368-2-ville.syrjala@linux.intel.comReviewed-by: NLucas De Marchi <lucas.demarchi@intel.com>

Passing both crtc and its state is redundant. Pass just the state.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190207173230.22368-1-ville.syrjala@linux.intel.comReviewed-by: NLucas De Marchi <lucas.demarchi@intel.com>

This is only used in intel_display() and shouldn't be needed there.
We don't want to keep converting from pll id to pll type so just remove
the function.
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190309035727.25389-6-lucas.demarchi@intel.com

Like was done for MG and combo, now finish the per-type split of the
vfunc by moving TBT out of the combo functions. Now we can completely
remove icl_pll_id_to_enable_reg() since each PLL type passes all the
information via arguments.
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190309035727.25389-5-lucas.demarchi@intel.com

Like was done in the enable case, split the implementation of the
disable for MG and Combo PLLs.
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190309035727.25389-4-lucas.demarchi@intel.com

Create separate functions to 1) enable power, 2) write pll config, and
3) enable pll. Doing this it makes it easier to share the functions for
the different PLL types by passing the right arguments.
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190309035727.25389-3-lucas.demarchi@intel.com

Let's start using the vfuncs to differentiate MG and Combo PLLs. The end
goal is to decouple the type of the PLL from the IDs since the latter
are likely to change from one platform to another. This also makes the
code easier to read by not having lots of if/else chains on leaf
functions.
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190309035727.25389-2-lucas.demarchi@intel.com

This exactly same approach was already used from gen9
to gen10 and from gen10 to gen11. Let's also use it
for gen11+.

Let's first assume that we inherit a similar platform
and than we apply the differences on top.

Different from the previous attempts this will be
done this time with coccinelle. We obviously need to
exclude some case that is really exclusive for gen11
like  PCH, Firmware, and few others. Luckly this was
easy to filter by selecting the files we are touching
with coccinelle as exposed below:

spatch -sp_file gen11\+.cocci --in-place i915_perf.c \
       intel_bios.c intel_cdclk.c intel_ddi.c \
       intel_device_info.c intel_display.c intel_dpll_mgr.c \
       intel_dsi_vbt.c intel_hdmi.c intel_mocs.c intel_color.c

@noticelake@ expression e; @@
-!IS_ICELAKE(e)
+INTEL_GEN(e) < 11
@notgen11@ expression e; @@
-!IS_GEN(e, 11)
+INTEL_GEN(e) < 11
@icelake@ expression e; @@
-IS_ICELAKE(e)
+INTEL_GEN(e) >= 11
@gen11@ expression e; @@
-IS_GEN(e, 11)
+INTEL_GEN(e) >= 11

No functional change.

v2: Remove intel_lrc.c per Tvrtko request since those were w/a
    for ICL hw issuea and media related configuration.

Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308214300.25057-1-rodrigo.vivi@intel.com

Let the MG plls have their own hooks since it shares very little with
other PLL types. It's also better so the platform info contains the info
if the PLL is for MG PHY rather than relying on the PLL ids.
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190222232324.16405-1-lucas.demarchi@intel.com

commit 5b0bd14d ("drm/i915/icl: keep track of unused pll while
looping") inadvertently (I presume) changed the code to pick the
last unused dpll rather than the first unused one like we did before.

While there should most likely be no harm in changing the order
let's change back just to avoid a change in the behaviour. At
least it might reduce the confusion when staring at logs (took
me a while to figure out why DPLL1 being picked over DPLL0
when the latter was most definitely available).

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190130181359.20693-1-ville.syrjala@linux.intel.comReviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Acked-by: NLucas De Marchi <lucas.demarchi@intel.com>

Instead of looping again on the range of plls, just keep track of one
unused one and use it later.
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190125222444.19926-5-lucas.demarchi@intel.com

Fix the TODO leftover in the code by changing the argument in MG_PLL
macros. The MG_PLL ids used to access the register values can be
converted from tc_port rather than port.

All these registers can use the TC port to calculate the right offsets
because they are only available for TC ports. The range (PORT_C onwards)
may not be stable and change from platform to platform. So by using the
TC id directly we avoid having to check for the platform in the "leaf
functions" and thus passing dev_priv around.

The helper functions were also renamed to use "tc" as prefix to make
them more generic.

v2: Improve commit message and fix checkpatch warning (from Paulo)
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190125222444.19926-2-lucas.demarchi@intel.com

Mixed C99 and kernel types use is getting ugly. Prefer kernel types.

sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g'

Minor checkpatch/whitespace fixes sprinkled on top of the changed lines.
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b73aefabb757acf59896bd77dbb20c2e343c6e6d.1547629303.git.jani.nikula@intel.com

The majority of runtime-pm operations are bounded and scoped within a
function; these are easy to verify that the wakeref are handled
correctly. We can employ the compiler to help us, and reduce the number
of wakerefs tracked when debugging, by passing around cookies provided
by the various rpm_get functions to their rpm_put counterpart. This
makes the pairing explicit, and given the required wakeref cookie the
compiler can verify that we pass an initialised value to the rpm_put
(quite handy for double checking error paths).
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-16-chris@chris-wilson.co.uk

This patch calculates various DPLL dividers and
parameters for DSI encoder and adjust AFE clock
for DSI. For DSI, 8x clock is AFE clock.

v2: Extend haswell_crtc_compute_clock() for Gen11 DSI

v3: Rebase

v4: use port clock instead of bitrate.

v5: Reabse and remove divide by 5

v6 by Jani:
- Fix indent (Madhav)
- Fix dpll state calc for EDP and DP MST
Co-developed-by: NVandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: NMadhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: NVandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/525d41d0d893dcdc8874d2ce70afa226227ea3f4.1543500285.git.jani.nikula@intel.com

enc_to_dig_port() returns NULL for encoders of type
INTEL_OUTPUT_DP_MST causing the crash bellow:

[ 2832.836101] BUG: unable to handle kernel paging request at 00000000000012b8
[ 2832.843062] PGD 0 P4D 0
[ 2832.845610] Oops: 0000 [#1] SMP
[ 2832.848764] CPU: 2 PID: 3577 Comm: kworker/2:0 Tainted: G        W         4.19.0-rc7+ #491
[ 2832.857106] Hardware name: Intel Corporation Ice Lake Client Platform/IceLake U DDR4 SODIMM PD RVP TLC, BIOS ICLSFWR1.R00.2352.A01.1808281852 08/28/2018
[ 2832.870734] Workqueue: events output_poll_execute
[ 2832.875480] RIP: 0010:icl_get_dpll+0xa4/0x5d0 [i915]
[ 2832.880449] Code: e9 03 f3 48 ab 8b 6e 74 41 8b 8c 24 5c 03 00 00 85 ed 0f 88 3f 02 00 00 83 fd 01 0f 8e ad 01 00 00 83 fd 05 0f 8f 2d 02 00 00 <83> ba b8 12 00 00 02 48 8b 36 0f 84 39 02 00 00 44 8b be ec 89 00
[ 2832.899176] RSP: 0018:ffffc90001b57a78 EFLAGS: 00010293
[ 2832.904404] RAX: 0000000000000000 RBX: ffffc90001b57a94 RCX: 0000000000083d60
[ 2832.911536] RDX: 0000000000000000 RSI: ffff8804a8c0dc00 RDI: ffffc90001b57b18
[ 2832.918668] RBP: 0000000000000003 R08: ffff8804a8c1f990 R09: ffff8804a8c1f990
[ 2832.925797] R10: 0000000000000000 R11: ffff8804a8e99600 R12: ffff8804a7760000
[ 2832.932930] R13: ffff88049e94d000 R14: ffff88049e94d000 R15: 000000000000000e
[ 2832.940063] FS:  0000000000000000(0000) GS:ffff8804b0300000(0000) knlGS:0000000000000000
[ 2832.948147] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2832.953893] CR2: 00000000000012b8 CR3: 0000000004a1d004 CR4: 0000000000760ee0
[ 2832.961027] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 2832.968155] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 2832.975286] PKRU: 55555554
[ 2832.978003] Call Trace:
[ 2832.980496]  haswell_crtc_compute_clock+0x3d/0x68 [i915]
[ 2832.985841]  intel_crtc_atomic_check+0x61/0x340 [i915]
[ 2832.990987]  drm_atomic_helper_check_planes+0x130/0x1c0
[ 2832.996245]  intel_atomic_check+0x4d5/0x10f0 [i915]
[ 2833.001147]  drm_atomic_check_only+0x484/0x690
[ 2833.005629]  drm_atomic_commit+0x13/0x50
[ 2833.009564]  restore_fbdev_mode_atomic+0x1c9/0x1e0
[ 2833.014363]  drm_fb_helper_restore_fbdev_mode_unlocked+0x47/0x90
[ 2833.020368]  drm_fb_helper_set_par+0x29/0x50
[ 2833.024641]  drm_fb_helper_hotplug_event.part.33+0x92/0xb0
[ 2833.030130]  drm_kms_helper_hotplug_event+0x26/0x30
[ 2833.035013]  output_poll_execute+0x192/0x1b0
[ 2833.039293]  process_one_work+0x2a5/0x5f0
[ 2833.043315]  worker_thread+0x2d/0x3d0
[ 2833.046988]  ? rescuer_thread+0x340/0x340
[ 2833.051009]  kthread+0x112/0x130
[ 2833.054247]  ? kthread_create_worker_on_cpu+0x70/0x70
[ 2833.059307]  ret_from_fork+0x3a/0x50
[ 2833.062893] Modules linked in: i915 prime_numbers snd_hda_codec_realtek snd_hda_codec_generic asix snd_usb_audio snd_usbmidi_lib snd_seq_midi snd_seq_midi_event snd_rawmidi cdc_ether usbnet x86_pkg_temp_thermal xhci_pci xhci_hcd ucsi_acpi typec_ucsi typec efivarfs [last unloaded: prime_numbers]
[ 2833.088917] CR2: 00000000000012b8
[ 2833.092241] ---[ end trace 25f9fe3d47af2e75 ]---
[ 2833.096895] RIP: 0010:icl_get_dpll+0xa4/0x5d0 [i915]
[ 2833.101866] Code: e9 03 f3 48 ab 8b 6e 74 41 8b 8c 24 5c 03 00 00 85 ed 0f 88 3f 02 00 00 83 fd 01 0f 8e ad 01 00 00 83 fd 05 0f 8f 2d 02 00 00 <83> ba b8 12 00 00 02 48 8b 36 0f 84 39 02 00 00 44 8b be ec 89 00
[ 2833.120589] RSP: 0018:ffffc90001b57a78 EFLAGS: 00010293
[ 2833.125815] RAX: 0000000000000000 RBX: ffffc90001b57a94 RCX: 0000000000083d60
[ 2833.132946] RDX: 0000000000000000 RSI: ffff8804a8c0dc00 RDI: ffffc90001b57b18
[ 2833.140080] RBP: 0000000000000003 R08: ffff8804a8c1f990 R09: ffff8804a8c1f990
[ 2833.147213] R10: 0000000000000000 R11: ffff8804a8e99600 R12: ffff8804a7760000
[ 2833.154350] R13: ffff88049e94d000 R14: ffff88049e94d000 R15: 000000000000000e
[ 2833.161483] FS:  0000000000000000(0000) GS:ffff8804b0300000(0000) knlGS:0000000000000000
[ 2833.169565] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2833.175313] CR2: 00000000000012b8 CR3: 0000000004a1d004 CR4: 0000000000760ee0
[ 2833.182449] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 2833.189578] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 2833.196712] PKRU: 55555554

MST ports are allocated from struct intel_dp_mst_encoder not from
struct intel_digital_port as regular ports, so to get the TC type it
is necessary check the primary digital port of the mst encoder.

Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181030215750.28213-5-jose.souza@intel.com

This patch adds helper function for identifying
whether the given PLL is combo PHY PLL or not.
This helper function is used inside various ICL
functions to make them scalable.
Signed-off-by: NVandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: NMahesh Kumar <mahesh1.kumar@intel.com>
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181003072203.12848-6-mahesh1.kumar@intel.com

Use intel_port_is_tc and intel_port_is_combophy
functions to replace the individual port checks
from port C to F and port A to B respectively.
Signed-off-by: NVandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: NMahesh Kumar <mahesh1.kumar@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181003072203.12848-5-mahesh1.kumar@intel.com

Use the existing port-to-id helper function, to refactor
hence making it scalable.
Signed-off-by: NVandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: NMahesh Kumar <mahesh1.kumar@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181003072203.12848-4-mahesh1.kumar@intel.com

s/crtc/crtc_state/ for the kernel doc as well as the params.

Fixes: 65c307fd ("drm/i915: Make shared dpll functions take crtc_state, v3.")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181008104808.17457-1-chris@chris-wilson.co.uk

Do not rely on crtc->config any more. Remove the assertion from
ibx_pch_dpll_disable, because we the dpll state tracking should
already handle this case correctly.

Changes since v1:
- Fixup accidental early return in intel_prepare_shared_dpll, oops!
Changes since v2:
- Don't use the freed crtc_state in intel_crtc_disable_noatomic()
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181005095244.1324-1-maarten.lankhorst@linux.intel.com

Copy the 38.4 vs. 19.2 MHz ref clock exception from the dpll
mgr into the clock readout function as well.

v2: Refactor the code into a common function
    s/is_icl/gen11+/ (Rodrigo)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107722Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180903142841.14627-1-ville.syrjala@linux.intel.comReviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915/icl: Implement HSDIV_RATIO of MG_CLKTOP2_HSCLKCTL_PORT reg as separate divider value defines

The register value of Divider Ratio for high speed divider
(hsdiv_ratio) in MG_CLKTOP2_HSCLKCTL_PORT register is not same as the
actual numerical value of the divider. So this patch implements
separate divider value defines for that field.
icl_mg_pll_find_divisors() can use these defines instead of magic
register values.

The new defines are going to be used in the next patch.

v2 (from Paulo):
 * Rebase.
 * Make it look a little more like the rest of our code.
v3 (from Paulo):
 * Make hsdiv u32 now that it's a bit field (José).
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>
Suggested-by: NJames Ausmus <james.ausmus@intel.com>
Signed-off-by: NManasi Navare <manasi.d.navare@intel.com>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180817215209.29133-1-paulo.r.zanoni@intel.com

Add missing TBT check in the Pll calculation.

v2: do not use a auxiliary function to check if status is
TBT or not. (Paulo)

v3: Code style changes. (Paulo)

Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NAnusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1532648115-29795-1-git-send-email-anusha.srivatsa@intel.com

Use the hardcoded tables provided by our spec.

v2:
  - SSC stays disabled.
  - Use intel_port_is_tc().

Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180711215909.23945-2-paulo.r.zanoni@intel.com

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Addresses-Coverity-ID: 141432
Addresses-Coverity-ID: 141433
Addresses-Coverity-ID: 141434
Addresses-Coverity-ID: 141435
Addresses-Coverity-ID: 141436
Addresses-Coverity-ID: 1357360
Addresses-Coverity-ID: 1357403
Addresses-Coverity-ID: 1357433
Addresses-Coverity-ID: 1392622
Addresses-Coverity-ID: 1415273
Addresses-Coverity-ID: 1435752
Addresses-Coverity-ID: 1441500
Addresses-Coverity-ID: 1454596
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180628223541.GA17665@embeddedor.com

Use drm_{plane,crtc,encoder,connector}_mask() where appropriate.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180626194716.12522-5-ville.syrjala@linux.intel.comReviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>

Some MG PLL registers have fields that need to be preserved at their HW
default or BIOS programmed values. So make sure we preserve them.

v2:
- Add comment to icl_mg_pll_write() explaining the need for register
  masks. (Vandita)
- Fix patchwork checkpatch warning.

v3:
- Rebase on drm-tip.

Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: James Ausmus <james.ausmus@intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: James Ausmus <james.ausmus@intel.com> (v1)
Reviewed-by: NVandita Kulkarni <vandita.kulkarni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180619164115.7835-1-imre.deak@intel.com

Atm we're zeroing out fields in MG_PLL_BIAS and MG_PLL_TDC_COLDST_BIAS
if refclk is 38.4MHz, whereas the spec tells us to preserve them.
Although the calculated values mostly match the register defaults even
for the 38.4MHz case, there are some differences wrt. what BIOS
programs (I noticed at least differences in the MG_PLL_BIAS/IREFTRIM and
MG_PLL_BIAS/BIASCAL_EN fields). In the lack of further info on how to
program these fields, just do what the spec says and preserve the BIOS
state.

v2:
- Preserve the BIOS programmed reg fields instead of programming them.

Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: James Ausmus <james.ausmus@intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: James Ausmus <james.ausmus@intel.com> (v1)
Reviewed-by: NVandita Kulkarni <vandita.kulkarni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180615143911.31082-1-imre.deak@intel.com

This commit just adds the register addresses and the basic skeleton of
the code. The next commits will expand on more specific functions.
Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180522002558.29262-15-paulo.r.zanoni@intel.com

PLLs are the source clocks for the DDIs so in order
to determine the ddi clock we need to check the PLL
configuration.

This gets a little tricky for ICL since there is
no register bit that maps directly to the link clock.
So this patch creates a separate function in intel_dpll_mgr.c
to obtain the write array PLL Params and compares the set
pll_params with the table to get the corresponding link
clock.

v2:
  - Fix the encoder type check (DK).
  - Improve our error checking, return a sane value (Mika, Paulo).
  - Fix table entries (Paulo).

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: NMika Kahola <mika.kahola@intel.com>
Signed-off-by: NManasi Navare <manasi.d.navare@intel.com>
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
[Paulo: implement v2]
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180523224444.19017-1-paulo.r.zanoni@intel.com

This implements the "MG PLL Programming" sequence from our spec. The
biggest problem was that the spec assumes real numbers, so we had to
adjust some numbers and calculations due to the fact that the Kernel
prefers to deal with integers.

I recommend grabbing some coffee, a pen and paper before reviewing
this patch.

v2:
 - Correctly identify DP encoders after upstream change.
 - Small checkpatch issues.
 - Rebase.
v3:
 - Try to impove the comment on the tdc_targetcnt calculation based on
   Manasi's feedback (Manasi).
 - Rebase.
Reviewed-by: NManasi Navare <manasi.d.navare@intel.com>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180328215803.13835-7-paulo.r.zanoni@intel.com

Just use the hardcoded tables provided by our spec.

v2: Rebase.
v3: Clarify that 38.4 uses the 19.2 table (James).
Reviewed-by: NJames Ausmus <james.ausmus@intel.com>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180328215803.13835-6-paulo.r.zanoni@intel.com

HDMI mode DPLL programming on ICL is the same as CNL, so just reuse
the CNL code.

v2:
 - Properly detect HDMI crtcs.
 - Rebase after changes to the cnl function (clock * 1000).
v3:
 - Add a comment to clarify why we treat 38.4 as 19.2 (James).
Reviewed-by: NJames Ausmus <james.ausmus@intel.com>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180328215803.13835-5-paulo.r.zanoni@intel.com

This commit introduces the definitions for the ICL clocks and adds the
basic functions to the shared DPLL framework. It adds code for the
Enable and Disable sequences for some PLLs, but it does not have the
code to compute the actual PLL values, which are marked as TODO
comments and should be introduced as separate commits.

Special thanks to James Ausmus for investigating and fixing a bug with
the placement of icl_unmap_plls_to_ports() function.

v2:
 - Rebase around dpll_lock changes.
v3:
 - The spec now says what the timeouts should be.
 - Touch DPCLKA_CFGCR0_ICL at the appropriate time so we don't freeze
   the machine.
 - Checkpatch found a white space problem.
 - Small adjustments before upstreaming.
v4:
 - Move the ICL checks out of the *map_plls_to_ports() functions
  (James)
 - Add extra encoder check (James)
 - Call icl_unmap_plls_to_ports() later (James)
v5:
 - Rebase after the pll struct changes.
v6:
 - Properly make the unmap function based on encoders_post_disable()
   with regarding to checks and iterators.
 - Address checkpatch comment on "min = max = x()".

Cc: James Ausmus <james.ausmus@intel.com>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NJames Ausmus <james.ausmus@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180427231436.9353-1-paulo.r.zanoni@intel.com

Remove 4-bytes hole in this struct an reorder tables accordingly. This
also changes the last element of the tables to be more future-proof.
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180320220637.21480-8-lucas.demarchi@intel.com

Replace all users of pll->flags to use pll->info.flags.
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180320220637.21480-7-lucas.demarchi@intel.com

Replace all users of pll->id to use pll->info->id. In functions using
this more than once it was preferred to add an id variable to make the
code easier to read.
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180320220637.21480-6-lucas.demarchi@intel.com