The Gretag-Macbeth Huey display colorimeter claims to be an HID device but
isn't. As a result the linux HID device will claim it, preventing FLOSS
software like Argyll CMS from talking to it.
Tested-by: NFrederic Crozat <fcrozat@mandriva.com>
Signed-off-by: NNicolas Mailhot <nicolas.mailhot@laposte.net>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Fix a panic, by changing
	hidinput_mapping_quirks(,, unsigned long *bit,)
to
	hidinput_mapping_quirks(,, unsigned long **bit,)

The `bit' in this function is an out parameter.
Signed-off-by: NFengguang Wu <wfg@mail.ustc.edu.cn>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The WARN_ON() in implement() and extract() spit out stacktraces and
a lot of other information that might make users think that there is
something seriously wrong with the system. WARN_ON() should not be
deliberately triggerable by userspace application, which these can be.
Usually this WARN_ON() triggers when hid2hci utility is sending the
data that don't correspond to the device's report descriptor.

Convert these messages to more friendly printk().
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The device is not discoverable, and needs to be poked to set its master, the
Bluetooth device it will try to connect to when the "Home" button is pressed
without a cable plugged in.

Using libusb means disconnecting the device from its driver to get the report
descriptor. Using hiddev, we can poke it without relinquishing control over it,
so when you plug it in, it would still work as a pad.

This could be then used by sixpair program, after it is rewritten to use
hiddev instead of libusb.
Signed-off-by: NBastien Nocera <hadess@hadess.net>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This fixes wacom tablets not working if usbmouse is loaded.
Signed-off-by: NPascal Terjan <pterjan@mandriva.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This removes ugly macros IS_* to distinguish devices that
need special handling in hid-input, and establish proper
quirks for them.
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Remove unused variable in quirk event handler.
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

BTC 8193 keyboard handles its scrollwheel in very non-standard way.
It produces two non-standard usages for scrolling up and down, in
both cases with postive value equaling to 1. We handle this by temporary
mapping, which we then catch in quirk event handler, and remap to
negative HWHEEL even in order to introduce correct behavior.

Also the button requires special mapping, as it triggers standard-violating
usage code.

Reported in kernel.org bugzilla #9385
Reported-by: NKir Kolyshkin <kir@sacred.ru>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch separates also the hid-input quirks that have to be
applied at the time the event occurs, so that the generic code
handling HUT-compliant devices is not messed up by them too much.
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Currently, the handling of mapping between hid and input for devices
that don't conform to HUT 1.12 specification is very messy -- no per-device
handling, no blacklists, conditions on idVendor and idProduct placed
all over the code.

This patch moves all the device-specific input mapping to a separate
file, and introduces a blacklist-style handling for non-standard
device-specific mappings.
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Make the Microsoft Wireless Optical Desktop 3.0 work as a mouse.

Microsoft Wireless Optical Desktop 3.0 doesn't properly describe its interface
class.  Specifically, since it doesn't mark the second interface as a mouse
(bInterfaceSubclass = 0), it doesn't get HID_QUIRK_NOGET applied to the
interface, and then acts broken when polled.
Signed-off-by: NDrew Fisher <drew.m.fisher@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Reuse the quirks from the Cordless Desktop LX500 - stops some of the extra
keys being reported as mouse buttons.
Signed-off-by: NCarlos Corbacho <cathectic@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Genius KB-29E has broken report descriptor, which causes some of the
Consumer usages to appear incorrectly as Button usages. We fix it by
fixing the report descriptor before it is being parsed.

Also a few of the keys violate the HUT standard, so they need a special
handling. They currently fall into "Reserved" range as per HUT 1.12.
Reported-by: NSzekeres Istvan <szekeres@iii.hu>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Don't directly cast list_head * to foo *, this works only when list
is the first member of struct foo, and we should not make the assumption
how members are ordered in the structure.

i.e. struct *f = (struct *f)pos will work if:
	struct foo {
		struct list_head list;
		int i;
	};

but will fail if:
	struct foo {
		int i;
		struct list_head list;
	}
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This mouse distinguishes horizontal wheel from vertical by a special "pseudo
event" GenericDesktop.00b8, with values of 0 for vertical and 8 for horizontal
wheel. Because this event is supplied by the parser too late, we need to delay
a wheel event, wait for this one and send either REL_WHEEL or REL_HWHEEL to
input depending on the event value.
Signed-off-by: NPavel Troller <patrol@sinus.cz>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Reuse the existing quirks for Apple laptop USB keyboards.
Signed-off-by: NMichel Daenzer <michel@tungstengraphics.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Preserve identifiers exposed in build and run time configuration though in
order not to break existing configurations.

This is in preparation for adding support for Apple aluminum USB keyboards.
Signed-off-by: NMichel Daenzer <michel@tungstengraphics.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The MS Presenter 8000 bluetooth mouse is a "dual-use" device: If you
press a button on the top, you can turn it around and find special keys
on the other side, useful for presentations. This patch maps those three
bottom-keys that are not already detected to the intended functions. The
magic bottom on the top is mapped to F5 when we switch from mouse to
presenter mode in order to activate the presentation mode in the related
software (e.g. OpenOffice).
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (54 commits)
  MAINTIANERS: just use Mike gmail e-mail for contact and pawn the serial driver off onto Sonic
  [Blackfin] arch: remove old I2C BF54x porting.
  [Blackfin] arch: Add the semtimedop syscall.  Upstream uClibc doesn't compile without it.
  [Blackfin] arch: fix bug kernel boot message: memory information is not reasonable
  [Blackfin] arch: use common flash driver to setup partitions rather than the bf5xx-flash driver
  [Blackfin] arch: Fix bug - kernel build with Debug option enabled fails to boot up
  [Blackfin] arch: Fix bug Only RTC interrupt can wake up deeper sleep core.
  [Blackfin] arch: Add proper SW System Reset delay sequence
  [Blackfin] arch: Update copyright date
  [Blackfin] arch: GPIO API cleanup and anomaly update
  [Blackfin] arch: Fix BUG gpio_direction_output API is not compatitable with GENERIC_GPIO API interface
  [Blackfin] arch: Initial checkin of the memory protection support.
  [Blackfin] arch: set_bfin_dma_config shouldnt set SYNC or RESTART by default - add argument or option
  [Blackfin] arch: Add some comments - fix semicolons
  [Blackfin] arch: move all code related to CPLB handling into a new subdirectory under kernel/
  [Blackfin] arch: print out list of modules if kernel is crashing and tell people if the kernel is tainted 
  [Blackfin] arch: enable generic GPIO based I2C driver in STAMP-BF533, EZKIT-BF533 and EZKIT-BF561 boards
  [Blackfin] arch: Don't oops_in_progress if single step is comming from the kernel
  [Blackfin] arch: Fix BUG - kernel sometimes would stuck with KEYBOARD_GPIO on
  [Blackfin] arch: update to latest anomaly sheets
  ...

All the users of this driver explicitly specify the I2C bus numbers
to be used in their platform data. Make the driver respect that.
Signed-off-by: NKalle Pokki <kalle.pokki@eke.fi>
Cc: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Convert the i2c-au1550 bus driver to platform driver, and
register a platform device for the Alchemy Db/Pb series of
boards.
Signed-off-by: NManuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Zero-bytes transfers would leave the bus transaction unfinished
(no i2c stop is sent), with the following transfer actually
sending the slave address to the previously addressed device,
resulting in weird device failures (e.g. reset minute register
values in my RTC).
This patch instructs the controller to send an I2C STOP right after
the slave address in case of a zero-byte transfer.
Signed-off-by: NManuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Propagate the error values returned by i2c_wait() instead of overriding
them with a meaningless -1.
Signed-off-by: NJon Smirl <jonsmirl@gmail.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

This adds a i2c_new_dummy() primitive to help work with devices
that consume multiple addresses, which include many I2C eeproms
and at least one RTC.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

It is no longer required to hold adapter->clist_lock to call
i2c_check_addr.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Cc: David Brownell <david-b@pacbell.net>

We only need to hold adapter->clist_lock when we touch the client list.
Signed-off-by: NJean Delvare <khali@linux-fr.org>

This goes on top of the patch removing most i2c_adapter.clients usage,
updating i2c_attach_client:

 - Don't call device_register() while holding clist_lock.  This
   removes a self-deadlock when on the i2c_driver.probe() path,
   for drivers that need to attach new devices (e.g. dummies).

 - Remove a redundant address check.  The driver model core does
   this as a consequence of guaranteeing unique names.

 - Move the "device registered" diagnostic so that it never lies;
   previously, on error paths it would falsely report success.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

The redundant i2c client list maintained by i2c-core is going away
soon, so drivers should stop using it now. Instead, they can use the
standard iterator provided by the device driver model
(device_for_each_child).
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Cc: David Brownell <david-b@pacbell.net>
Cc: Michael Hunold <michael@mihu.de>

The i2c_adapter.clients list of i2c_client nodes duplicates driver
model state.  This patch starts removing that list, letting us remove
most existing users of those i2c-core lists.

 * The core I2C code now iterates over the driver model's list instead
   of the i2c-internal one in some places where it's safe:
      - Passing a command/ioctl to each client, a mechanims
        used almost exclusively by DVB adapters;
      - Device address checking, in both i2c-core and i2c-dev.

 * Provide i2c_verify_client() to use with driver model iterators.

 * Flag the relevant i2c_adapter and i2c_client fields as deprecated,
   to help prevent new users from appearing.

For the moment the list needs to stick around, since some issues show
up when deleting devices created by legacy I2C drivers.  (They don't
follow standard driver model rules.  Removing those devices can cause
self-deadlocks.)
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Add support for another variant of the VT8237. I couldn't test
I2C block support but I assume it is present as well.
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Checking the PCI function number doesn't add any value, and it makes
adding dynamic IDs to the driver more difficult. Drop this check.
Signed-off-by: NJean Delvare <khali@linux-fr.org>

The i2c-amd756 and i2c-viapro drivers make use of the driver_data
field of the PCI device ID. When adding device IDs dynamically (by
writing to the new_id sysfs file) you cannot set the value of this
field by default. It has to be allowed explicitly. Do that, and
check the value so that the user can't crash the kernel accidentally.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add polling I2C transfer implementation for PXA I2C. This is needed
for cases where I2C transactions have to occur at times interrups are
disabled.
Signed-off-by: NMike Rapoport <mike@compulab.co.il>
Acked-by: Neric miao <eric.miao@marvell.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Allow i2c_transfer to be called in contexts where sleeping is not allowed.
It is the reponsability of the caller to ensure that the underlying i2c bus
driver will not sleep either.
Signed-off-by: NMike Rapoport <mike@compulab.co.il>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

The implementation is unsafe, and anyway one can achieve the same from
userspace using i2c-dev + i2cdetect.

Also tag i2c_sibyte_add_bus __init.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Cc: Ralf Baechle <ralf@linux-mips.org>

Discard all I2C driver IDs that aren't used anywhere. That's not just a
couple of them, but more like 49 or one quarter of all defined IDs! And
this is just a first pass, next will come all IDs that are set but
never used, or used but never set.
Signed-off-by: NJean Delvare <khali@linux-fr.org>

I2C block read is supported since the ICH5. I couldn't get it to work
using the block buffer, so it's using the old-style byte-by-byte mode
for now.

Note: I'm also updating the driver author... The i2c-i801 driver was
really written by Mark Studebaker, even though he based his work on
the i2c-piix4 driver which was written by Philip Edelbrock.
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Clear special mode bits (PEC, block buffer) at driver load time,
you never know in which state the device was left by its last user.

Also make sure that we reset the block buffer mode at the end of every
transaction, not only when PEC was used.
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Use separate flags with explicit names to describe the features of
the ICH chip.
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Provide a clearer documentation of which additional features each
ICH chip support, and which of these the driver supports.
Signed-off-by: NJean Delvare <khali@linux-fr.org>