Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 25 5月, 2022 1 次提交
  3. 04 5月, 2022 3 次提交
  5. 12 4月, 2022 1 次提交
  7. 06 4月, 2022 1 次提交
  9. 02 4月, 2022 1 次提交
  11. 08 3月, 2022 1 次提交
    • S
      KVM: selftests: Add test to populate a VM with the max possible guest mem · b58c55d5
      由 Sean Christopherson 提交于 
      Add a selftest that enables populating a VM with the maximum amount of
guest memory allowed by the underlying architecture.  Abuse KVM's
memslots by mapping a single host memory region into multiple memslots so
that the selftest doesn't require a system with terabytes of RAM.

Default to 512gb of guest memory, which isn't all that interesting, but
should work on all MMUs and doesn't take an exorbitant amount of memory
or time.  E.g. testing with ~64tb of guest memory takes the better part
of an hour, and requires 200gb of memory for KVM's page tables when using
4kb pages.

To inflicit maximum abuse on KVM' MMU, default to 4kb pages (or whatever
the not-hugepage size is) in the backing store (memfd).  Use memfd for
the host backing store to ensure that hugepages are guaranteed when
requested, and to give the user explicit control of the size of hugepage
being tested.

By default, spin up as many vCPUs as there are available to the selftest,
and distribute the work of dirtying each 4kb chunk of memory across all
vCPUs.  Dirtying guest memory forces KVM to populate its page tables, and
also forces KVM to write back accessed/dirty information to struct page
when the guest memory is freed.

On x86, perform two passes with a MMU context reset between each pass to
coerce KVM into dropping all references to the MMU root, e.g. to emulate
a vCPU dropping the last reference.  Perform both passes and all
rendezvous on all architectures in the hope that arm64 and s390x can gain
similar shenanigans in the future.

Measure and report the duration of each operation, which is helpful not
only to verify the test is working as intended, but also to easily
evaluate the performance differences different page sizes.

Provide command line options to limit the amount of guest memory, set the
size of each slot (i.e. of the host memory region), set the number of
vCPUs, and to enable usage of hugepages.
Signed-off-by: NSean Christopherson <seanjc@google.com>
Message-Id: <20220226001546.360188-29-seanjc@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      b58c55d5
  13. 04 3月, 2022 1 次提交
  15. 01 3月, 2022 1 次提交
    • S
      KVM: selftests: Add test to verify KVM handling of ICR · 85c68eb4
      由 Sean Christopherson 提交于 
      The main thing that the selftest verifies is that KVM copies x2APIC's
ICR[63:32] to/from ICR2 when userspace accesses the vAPIC page via
KVM_{G,S}ET_LAPIC.  KVM previously split x2APIC ICR to ICR+ICR2 at the
time of write (from the guest), and so KVM must preserve that behavior
for backwards compatibility between different versions of KVM.

It will also test other invariants, e.g. that KVM clears the BUSY
flag on ICR writes, that the reserved bits in ICR2 are dropped on writes
from the guest, etc...
Signed-off-by: NSean Christopherson <seanjc@google.com>
Message-Id: <20220204214205.3306634-12-seanjc@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      85c68eb4
  17. 14 2月, 2022 1 次提交
  19. 20 1月, 2022 3 次提交
  21. 18 1月, 2022 1 次提交
  23. 29 12月, 2021 1 次提交
  25. 20 12月, 2021 1 次提交
    • S
      KVM: selftests: Add test to verify TRIPLE_FAULT on invalid L2 guest state · ab1ef344
      由 Sean Christopherson 提交于 
      Add a selftest to attempt to enter L2 with invalid guests state by
exiting to userspace via I/O from L2, and then using KVM_SET_SREGS to set
invalid guest state (marking TR unusable is arbitrary chosen for its
relative simplicity).

This is a regression test for a bug introduced by commit c8607e4a
("KVM: x86: nVMX: don't fail nested VM entry on invalid guest state if
!from_vmentry"), which incorrectly set vmx->fail=true when L2 had invalid
guest state and ultimately triggered a WARN due to nested_vmx_vmexit()
seeing vmx->fail==true while attempting to synthesize a nested VM-Exit.

The is also a functional test to verify that KVM sythesizes TRIPLE_FAULT
for L2, which is somewhat arbitrary behavior, instead of emulating L2.
KVM should never emulate L2 due to invalid guest state, as it's
architecturally impossible for L1 to run an L2 guest with invalid state
as nested VM-Enter should always fail, i.e. L1 needs to do the emulation.
Stuffing state via KVM ioctl() is a non-architctural, out-of-band case,
hence the TRIPLE_FAULT being rather arbitrary.
Signed-off-by: NSean Christopherson <seanjc@google.com>
Message-Id: <20211207193006.120997-5-seanjc@google.com>
Reviewed-by: NMaxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      ab1ef344
  27. 10 12月, 2021 1 次提交
  29. 18 11月, 2021 1 次提交
    • A
      selftests: KVM: Add /x86_64/sev_migrate_tests to .gitignore · b768f60b
      由 Arnaldo Carvalho de Melo 提交于 
        $ git status
  nothing to commit, working tree clean
  $
  $ make -C tools/testing/selftests/kvm/ > /dev/null 2>&1
  $ git status

  Untracked files:
    (use "git add <file>..." to include in what will be committed)
  	tools/testing/selftests/kvm/x86_64/sev_migrate_tests

  nothing added to commit but untracked files present (use "git add" to track)
  $

Fixes: 6a581508 ("selftest: KVM: Add intra host migration tests")
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Marc Orr <marcorr@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Gonda <pgonda@google.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Message-Id: <YZPIPfvYgRDCZi/w@kernel.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      b768f60b
  31. 19 10月, 2021 2 次提交
  33. 17 10月, 2021 1 次提交
  35. 23 9月, 2021 1 次提交
    • M
      KVM: x86: selftests: test simultaneous uses of V_IRQ from L1 and L0 · 1ad32105
      由 Maxim Levitsky 提交于 
      Test that if:

* L1 disables virtual interrupt masking, and INTR intercept.

* L1 setups a virtual interrupt to be injected to L2 and enters L2 with
  interrupts disabled, thus the virtual interrupt is pending.

* Now an external interrupt arrives in L1 and since
  L1 doesn't intercept it, it should be delivered to L2 when
  it enables interrupts.

  to do this L0 (abuses) V_IRQ to setup an
  interrupt window, and returns to L2.

* L2 enables interrupts.
  This should trigger the interrupt window,
  injection of the external interrupt and delivery
  of the virtual interrupt that can now be done.

* Test that now L2 gets those interrupts.

This is the test that demonstrates the issue that was
fixed in the previous patch.
Signed-off-by: NMaxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210914154825.104886-3-mlevitsk@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      1ad32105
  37. 22 9月, 2021 1 次提交
  39. 19 8月, 2021 1 次提交
  41. 28 7月, 2021 1 次提交
    • D
      KVM: selftests: Introduce access_tracking_perf_test · c33e05d9
      由 David Matlack 提交于 
      This test measures the performance effects of KVM's access tracking.
Access tracking is driven by the MMU notifiers test_young, clear_young,
and clear_flush_young. These notifiers do not have a direct userspace
API, however the clear_young notifier can be triggered by marking a
pages as idle in /sys/kernel/mm/page_idle/bitmap. This test leverages
that mechanism to enable access tracking on guest memory.

To measure performance this test runs a VM with a configurable number of
vCPUs that each touch every page in disjoint regions of memory.
Performance is measured in the time it takes all vCPUs to finish
touching their predefined region.

Example invocation:

  $ ./access_tracking_perf_test -v 8
  Testing guest mode: PA-bits:ANY, VA-bits:48,  4K pages
  guest physical test memory offset: 0xffdfffff000

  Populating memory             : 1.337752570s
  Writing to populated memory   : 0.010177640s
  Reading from populated memory : 0.009548239s
  Mark memory idle              : 23.973131748s
  Writing to idle memory        : 0.063584496s
  Mark memory idle              : 24.924652964s
  Reading from idle memory      : 0.062042814s

Breaking down the results:

 * "Populating memory": The time it takes for all vCPUs to perform the
   first write to every page in their region.

 * "Writing to populated memory" / "Reading from populated memory": The
   time it takes for all vCPUs to write and read to every page in their
   region after it has been populated. This serves as a control for the
   later results.

 * "Mark memory idle": The time it takes for every vCPU to mark every
   page in their region as idle through page_idle.

 * "Writing to idle memory" / "Reading from idle memory": The time it
   takes for all vCPUs to write and read to every page in their region
   after it has been marked idle.

This test should be portable across architectures but it is only enabled
for x86_64 since that's all I have tested.
Reviewed-by: NBen Gardon <bgardon@google.com>
Signed-off-by: NDavid Matlack <dmatlack@google.com>
Message-Id: <20210713220957.3493520-7-dmatlack@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      c33e05d9
  43. 25 6月, 2021 2 次提交
  45. 24 6月, 2021 1 次提交
    • S
      KVM: sefltests: Add x86-64 test to verify MMU reacts to CPUID updates · ef6a74b2
      由 Sean Christopherson 提交于 
      Add an x86-only test to verify that x86's MMU reacts to CPUID updates
that impact the MMU.  KVM has had multiple bugs where it fails to
reconfigure the MMU after the guest's vCPU model changes.

Sadly, this test is effectively limited to shadow paging because the
hardware page walk handler doesn't support software disabling of GBPAGES
support, and KVM doesn't manually walk the GVA->GPA on faults for
performance reasons (doing so would large defeat the benefits of TDP).

Don't require !TDP for the tests as there is still value in running the
tests with TDP, even though the tests will fail (barring KVM hacks).
E.g. KVM should not completely explode if MAXPHYADDR results in KVM using
4-level vs. 5-level paging for the guest.
Signed-off-by: NSean Christopherson <seanjc@google.com>
Message-Id: <20210622200529.3650424-20-seanjc@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      ef6a74b2
  47. 22 6月, 2021 1 次提交
  49. 18 6月, 2021 2 次提交
  51. 14 6月, 2021 1 次提交
  53. 27 5月, 2021 1 次提交
    • M
      KVM: selftests: add a memslot-related performance benchmark · cad347fa
      由 Maciej S. Szmigiero 提交于 
      This benchmark contains the following tests:
* Map test, where the host unmaps guest memory while the guest writes to
it (maps it).

The test is designed in a way to make the unmap operation on the host
take a negligible amount of time in comparison with the mapping
operation in the guest.

The test area is actually split in two: the first half is being mapped
by the guest while the second half in being unmapped by the host.
Then a guest <-> host sync happens and the areas are reversed.

* Unmap test which is broadly similar to the above map test, but it is
designed in an opposite way: to make the mapping operation in the guest
take a negligible amount of time in comparison with the unmap operation
on the host.
This test is available in two variants: with per-page unmap operation
or a chunked one (using 2 MiB chunk size).

* Move active area test which involves moving the last (highest gfn)
memslot a bit back and forth on the host while the guest is
concurrently writing around the area being moved (including over the
moved memslot).

* Move inactive area test which is similar to the previous move active
area test, but now guest writes all happen outside of the area being
moved.

* Read / write test in which the guest writes to the beginning of each
page of the test area while the host writes to the middle of each such
page.
Then each side checks the values the other side has written.
This particular test is not expected to give different results depending
on particular memslots implementation, it is meant as a rough sanity
check and to provide insight on the spread of test results expected.

Each test performs its operation in a loop until a test period ends
(this is 5 seconds by default, but it is configurable).
Then the total count of loops done is divided by the actual elapsed
time to give the test result.

The tests have a configurable memslot cap with the "-s" test option, by
default the system maximum is used.
Each test is repeated a particular number of times (by default 20
times), the best result achieved is printed.

The test memory area is divided equally between memslots, the reminder
is added to the last memslot.
The test area size does not depend on the number of memslots in use.

The tests also measure the time that it took to add all these memslots.
The best result from the tests that use the whole test area is printed
after all the requested tests are done.

In general, these tests are designed to use as much memory as possible
(within reason) while still doing 100+ loops even on high memslot counts
with the default test length.
Increasing the test runtime makes it increasingly more likely that some
event will happen on the system during the test run, which might lower
the test result.
Signed-off-by: NMaciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: NAndrew Jones <drjones@redhat.com>
Message-Id: <8d31bb3d92bc8fa33a9756fa802ee14266ab994e.1618253574.git.maciej.szmigiero@oracle.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      cad347fa
  55. 20 4月, 2021 1 次提交
    • Y
      KVM: selftests: Add a test for kvm page table code · b9c2bd50
      由 Yanan Wang 提交于 
      This test serves as a performance tester and a bug reproducer for
kvm page table code (GPA->HPA mappings), so it gives guidance for
people trying to make some improvement for kvm.

The function guest_code() can cover the conditions where a single vcpu or
multiple vcpus access guest pages within the same memory region, in three
VM stages(before dirty logging, during dirty logging, after dirty logging).
Besides, the backing src memory type(ANONYMOUS/THP/HUGETLB) of the tested
memory region can be specified by users, which means normal page mappings
or block mappings can be chosen by users to be created in the test.

If ANONYMOUS memory is specified, kvm will create normal page mappings
for the tested memory region before dirty logging, and update attributes
of the page mappings from RO to RW during dirty logging. If THP/HUGETLB
memory is specified, kvm will create block mappings for the tested memory
region before dirty logging, and split the blcok mappings into normal page
mappings during dirty logging, and coalesce the page mappings back into
block mappings after dirty logging is stopped.

So in summary, as a performance tester, this test can present the
performance of kvm creating/updating normal page mappings, or the
performance of kvm creating/splitting/recovering block mappings,
through execution time.

When we need to coalesce the page mappings back to block mappings after
dirty logging is stopped, we have to firstly invalidate *all* the TLB
entries for the page mappings right before installation of the block entry,
because a TLB conflict abort error could occur if we can't invalidate the
TLB entries fully. We have hit this TLB conflict twice on aarch64 software
implementation and fixed it. As this test can imulate process from dirty
logging enabled to dirty logging stopped of a VM with block mappings,
so it can also reproduce this TLB conflict abort due to inadequate TLB
invalidation when coalescing tables.
Signed-off-by: NYanan Wang <wangyanan55@huawei.com>
Reviewed-by: NBen Gardon <bgardon@google.com>
Reviewed-by: NAndrew Jones <drjones@redhat.com>
Message-Id: <20210330080856.14940-11-wangyanan55@huawei.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      b9c2bd50
  57. 06 4月, 2021 1 次提交
  59. 19 3月, 2021 2 次提交
  61. 18 3月, 2021 1 次提交
    • V
      selftests: kvm: Add basic Hyper-V clocksources tests · 2c7f76b4
      由 Vitaly Kuznetsov 提交于 
      Introduce a new selftest for Hyper-V clocksources (MSR-based reference TSC
and TSC page). As a starting point, test the following:
1) Reference TSC is 1Ghz clock.
2) Reference TSC and TSC page give the same reading.
3) TSC page gets updated upon KVM_SET_CLOCK call.
4) TSC page does not get updated when guest opted for reenlightenment.
5) Disabled TSC page doesn't get updated.
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210318140949.1065740-1-vkuznets@redhat.com>
[Add a host-side test using TSC + KVM_GET_MSR too. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      2c7f76b4
  63. 16 2月, 2021 1 次提交