Fix the value returned by <MAX|MAXA|MIN|MINA>.<D|S>, if both inputs
are zeros. The right behavior in such cases is stated in instruction
reference manual and is as follows:

   fs  ft       MAX     MIN       MAXA    MINA
  ---------------------------------------------
    0   0        0       0         0       0
    0  -0        0      -0         0      -0
   -0   0        0      -0         0      -0
   -0  -0       -0      -0        -0      -0

Prior to this patch, some of the above cases were yielding correct
results. However, for the sake of code consistency, all such cases
are rewritten in this patch.

A relevant example:

MAX.S fd,fs,ft:
  If fs contains +0.0, and ft contains -0.0, fd is going to contain
  +0.0 (without this patch, it used to contain -0.0).

Fixes: a79f5f9b ("MIPS: math-emu: Add support for the MIPS R6 MAX{, A} FPU instruction")
Fixes: 4e9561b2 ("MIPS: math-emu: Add support for the MIPS R6 MIN{, A} FPU instruction")
Signed-off-by: NMiodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: NGoran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: NAleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Bo Hu <bohu@google.com>
Cc: Douglas Leung <douglas.leung@imgtec.com>
Cc: Jin Qian <jinqian@google.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Petar Jovanovic <petar.jovanovic@imgtec.com>
Cc: Raghu Gandham <raghu.gandham@imgtec.com>
Cc: <stable@vger.kernel.org> # 4.3+
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16881/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Fix the value returned by <MAX|MAXA|MIN|MINA>.<D|S> fd,fs,ft, if both
inputs are quiet NaNs. The <MAX|MAXA|MIN|MINA>.<D|S> specifications
state that the returned value in such cases should be the quiet NaN
contained in register fs.

A relevant example:

MAX.S fd,fs,ft:
  If fs contains qNaN1, and ft contains qNaN2, fd is going to contain
  qNaN1 (without this patch, it used to contain qNaN2).

Fixes: a79f5f9b ("MIPS: math-emu: Add support for the MIPS R6 MAX{, A} FPU instruction")
Fixes: 4e9561b2 ("MIPS: math-emu: Add support for the MIPS R6 MIN{, A} FPU instruction")
Signed-off-by: NMiodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: NGoran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: NAleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Bo Hu <bohu@google.com>
Cc: Douglas Leung <douglas.leung@imgtec.com>
Cc: Jin Qian <jinqian@google.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Petar Jovanovic <petar.jovanovic@imgtec.com>
Cc: Raghu Gandham <raghu.gandham@imgtec.com>
Cc: <stable@vger.kernel.org> # 4.3+
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16880/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

We currently have various variables & functions which are only used
within a single translation unit, but which we don't declare static.
This causes various sparse warnings of the form:

  arch/mips/kernel/mips-r2-to-r6-emul.c:49:1: warning: symbol
    'mipsr2emustats' was not declared. Should it be static?

  arch/mips/kernel/unaligned.c:1381:11: warning: symbol 'reg16to32st'
    was not declared. Should it be static?

  arch/mips/mm/mmap.c:146:15: warning: symbol 'arch_mmap_rnd' was not
    declared. Should it be static?

Fix these & others by declaring various affected variables & functions
static, avoiding the sparse warnings & redundant symbols.

[ralf@linux-mips.org: Add Marcin's build fix.]
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: trivial@kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17176/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The plat_timer_setup() function is entirely unused - nothing calls it,
and no platforms provide it. Perhaps our dummy implementation was once
useful as an aid in forward porting platforms, but its time has long
since passed so let's remove the dead code.
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: trivial@kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17175/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The __invalidate_kernel_vmap_range function pointer global variable
isn't used anywhere. Remove it.
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: trivial@kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17174/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The fault_addr argument to fpu_emulator_cop1Handler(), fpux_emu() and
cop1Emulate() has up until now been declared as:

  void *__user *fault_addr

This is essentially a pointer in user memory which points to a pointer
to void. This is not the intent for our code, which is actually
operating on a pointer to a pointer to void where the pointer to void is
pointing at user memory. ie. the pointer is in kernel memory & points to
user memory.

This mismatch produces a lot of sparse warnings that look like this:

arch/mips/math-emu/cp1emu.c:1485:45:
   warning: incorrect type in assignment (different address spaces)
      expected void *[noderef] <asn:1><noident>
      got unsigned int [noderef] [usertype] <asn:1>*[assigned] va

Fix these by modifying the declaration of the fault_addr argument to:

  void __user **fault_addr
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: trivial@kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17173/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

arch/mips/mm/init.c provides our implementation of free_initrd_mem(),
but doesn't include the linux/initrd.h header which declares them. This
leads to a warning from sparse:

  arch/mips/mm/init.c:501:6: warning: symbol 'free_initrd_mem' was not
    declared. Should it be static?

Fix this by including linux/initrd.h to get the declaration of
free_initrd_mem().
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: trivial@kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17172/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

arch/mips/mm/mmap.c provides our implementations of the arch_mmap_rnd()
& arch_randomize_brk() functions, but doesn't include the
linux/elf-randomize.h header which declares them. This leads to warnings
from sparse:

  arch/mips/mm/mmap.c:146:15: warning: symbol 'arch_mmap_rnd' was not
    declared. Should it be static?
  arch/mips/mm/mmap.c:190:15: warning: symbol 'arch_randomize_brk' was
    not declared. Should it be static?

Fix this by including linux/elf-randomize.h to get the declarations of
arch_mmap_rnd() & arch_randomize_brk().
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: trivial@kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17171/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

arch/mips/lib/delay.c provides our implementations of the __delay(),
__ndelay() & __udelay() functions, but doesn't include the asm/delay.h
header which declares them. This leads to warnings from sparse:

  arch/mips/lib/delay.c:26:6: warning: symbol '__delay' was not
    declared. Should it be static?
  arch/mips/lib/delay.c:50:6: warning: symbol '__udelay' was not
    declared. Should it be static?
  arch/mips/lib/delay.c:58:6: warning: symbol '__ndelay' was not
    declared. Should it be static?

To keep checkpatch happy was well, include <linux/delay.h> rather than
<asm/delay.h> directly to get the declarations of __delay(), __ndelay() &
__udelay().

[ralf@linux-mips.org: Fixed to include <linux/delay.h.]
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: trivial@kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17170/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

arch/mips/kernel/idle.c provides our implementation of the
arch_cpu_idle() function, but doesn't include the linux/cpu.h header
which declares it. This leads to a warning from sparse:

  arch/mips/kernel/idle.c:256:6: warning: symbol 'arch_cpu_idle' was not
    declared. Should it be static?

Fix this by including linux/cpu.h to get the declaration of
arch_cpu_idle().
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: trivial@kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17169/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

arch/mips/mm/cache.c provides our implementation of the cpu_cache_init()
function, but doesn't include the asm/setup.h header which declares it.
This leads to a warning from sparse:

  arch/mips/mm/cache.c:274:6: warning: symbol 'cpu_cache_init' was not
    declared. Should it be static?

Fix this by including asm/setup.h to get the declaration of
cpu_cache_init().
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: trivial@kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17168/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

arch/mips/generic/irq.c provides implementations of the
get_c0_compare_int() & get_c0_perfcount_int() functions, but doesn't
include the asm/time.h header which declares them. This leads to
warnings from sparse:

  arch/mips/generic/irq.c:36:5: warning: symbol 'get_c0_perfcount_int'
    was not declared. Should it be static?
  arch/mips/generic/irq.c:52:14: warning: symbol 'get_c0_compare_int'
    was not declared. Should it be static?

Fix this by including asm/time.h to get the declarations of
get_c0_compare_int() & get_c0_perfcount_int().
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: trivial@kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17167/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

arch/mips/generic/init.c provides an implementation of the
plat_fdt_relocated() function, but doesn't include the asm/bootinfo.h
header which declares it. This leads to a warning from sparse:

arch/mips/generic/init.c:94:13: warning: symbol 'plat_fdt_relocated' was
  not declared. Should it be static?

Fix this by including asm/bootinfo.h to get the declaration of
plat_fdt_relocated(). We also #ifdef our definition of
plat_fdt_relocated() such that it is only provided when
CONFIG_RELOCATABLE is set, matching the header & avoiding the redundant
function for non-relocatable kernels.
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Cc: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: trivial@kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17166/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Besides eliminating lots of duplication this also allows allocations with
the DMA_ATTR_NON_CONSISTENT to use the CMA allocator.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17181/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Create a defconfig for the Omega2+ that reaches userspace and
allows use of the USB port.
Signed-off-by: NHarvey Hunt <harvey.hunt@imgtec.com>
Cc: robh+dt@kernel.org
Cc: mark.rutland@arm.com
Cc: john@phrozen.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17138/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The Onion Omega2+ is an MT7688A based board that has 128MB RAM and
multiple peripherals.

The MT7688A is pin compatible with the MT7628A, although the former
supports a 1T1R antenna whereas the MT7628A supports a 2R2T antenna.
Signed-off-by: NHarvey Hunt <harvey.hunt@imgtec.com>
Cc: robh+dt@kernel.org
Cc: mark.rutland@arm.com
Cc: john@phrozen.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17137/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Enabled supported drivers, including:
    - USB PHY
    - EHCI
    - UART
Signed-off-by: NHarvey Hunt <harvey.hunt@imgtec.com>
Cc: robh+dt@kernel.org
Cc: mark.rutland@arm.com
Cc: john@phrozen.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17135/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The VoCore2 board is a low cost MT7628A based board with 128MB RAM, 16MB
flash and multiple external peripherals.

This initial DTS provides enough support to get to userland and use the USB
port.
Signed-off-by: NHarvey Hunt <harvey.hunt@imgtec.com>
Cc: robh+dt@kernel.org
Cc: mark.rutland@arm.com
Cc: john@phrozen.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17134/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

VoCore are a manufacturer of devices such as the VoCore2.
Signed-off-by: NHarvey Hunt <harvey.hunt@imgtec.com>
Acked-by: NRob Herring <robh@kernel.org>
Cc: robh+dt@kernel.org
Cc: mark.rutland@arm.com
Cc: john@phrozen.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17132/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The MT7628A is the successor to the MT7620 and pin compatible with the
MT7688A, although the latter supports only a 1T1R antenna rather than
a 2T2R antenna.

This commit adds support for the following features:

- UART
- USB PHY
- EHCI
- Interrupt controller
- System controller
- Memory controller
- Reset controller
Signed-off-by: NHarvey Hunt <harvey.hunt@imgtec.com>
Cc: robh+dt@kernel.org
Cc: mark.rutland@arm.com
Cc: john@phrozen.org
Cc: Harvey Hunt <harvey.hunt@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mediatek@lists.infradead.org
Patchwork: https://patchwork.linux-mips.org/patch/17133/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This introduces threaded carddetect irqs for the db1200/db1300 boards.
Main benefit is that the broken insertion/ejection interrupt pairs
can now be better supported and debounced in software.
Signed-off-by: NManuel Lauss <manuel.lauss@gmail.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15287/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

No advanced MIPS features for Alchemy.
This patch shaves additional 43kB off the DB1300 kernel
(~0.5% size reduction).
Signed-off-by: NManuel Lauss <manuel.lauss@gmail.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15286/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Prints the devboard name in cpuinfo "machine" line.
Signed-off-by: NManuel Lauss <manuel.lauss@gmail.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15285/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

GCC-7 complains about a boolean value being used with an arithmetic
AND:

arch/mips/math-emu/cp1emu.c: In function 'cop1Emulate':
arch/mips/math-emu/cp1emu.c:838:14: warning: '~' on a boolean expression [-Wbool-operation]
  fpr = (x) & ~(cop1_64bit(xcp) == 0);    \
              ^
arch/mips/math-emu/cp1emu.c:1068:3: note: in expansion of macro 'DITOREG'
   DITOREG(dval, MIPSInst_RT(ir));
   ^~~~~~~
arch/mips/math-emu/cp1emu.c:838:14: note: did you mean to use logical not?
  fpr = (x) & ~(cop1_64bit(xcp) == 0);    \

Since cop1_64bit() returns and int, just flip the LSB.
Suggested-by: NMaciej W. Rozycki <macro@imgtec.com>
Signed-off-by: NManuel Lauss <manuel.lauss@gmail.com>
Reviewed-by: NMaciej W. Rozycki <macro@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17058/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Add devicetree nodes for the DM9000 and the ethernet power regulator.
Additionally, add a new pinctrl node for the ethernet chip's pins.
Signed-off-by: NHarvey Hunt <harvey.hunt@imgtec.com>
Cc: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: devicetree@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16752/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Update the Ci20's defconfig to enable the JZ4780's GPIO driver.
Signed-off-by: NHarvey Hunt <harvey.hunt@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16751/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Move the NI 169445 board flattened image tree source into its own file
which is concatenated into the final image tree source used to build the
flattened image tree. Separating boards into different files will help
us to avoid conflicts as boards are added.
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Cc: Nathan Sullivan <nathan.sullivan@ni.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16940/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Move the Boston board flattened image tree source into its own file
which is concatenated into the final image tree source used to build the
flattened image tree. Separating boards into different files will help
us to avoid conflicts as boards are added.
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16939/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

In preparation for splitting arch/mips/generic/vmlinux.its.S into
multiple files such that it doesn't become a conflict magnet as boards
are added, allow platforms to specify a list of image tree source files
which will be concatenated to form the final source used to build the
image tree.
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16938/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Define Cavium Octeon as a CPU that has support for mips32r1, mips32r2 and
mips64r1. This will affect show_cpuinfo() that will now correctly expose
mips32r1, mips32r2 and mips64r1 as supported ISAs.
Signed-off-by: NPetar Jovanovic <petar.jovanovic@rt-rk.com>
Reviewed-by: NMaciej W. Rozycki <macro@imgtec.com>
Acked-by: NDavid Daney <david.daney@cavium.com>
Cc: petar.jovanovic@imgtec.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15749/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Based on discussion with Linus remove the impossible to reach code
rather than replacing it with a BUG().
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Link: http://lkml.kernel.org/r/20170718140651.15973-4-ebiederm@xmission.com

Support the National Instruments 169445 board.
Signed-off-by: NNathan Sullivan <nathan.sullivan@ni.com>
Acked-by: NRob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16782/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Commit a53e35db ("reset: Ensure drivers are explicit when requesting
reset lines") started to transition the reset control request API calls
to explicitly state whether the driver needs exclusive or shared reset
control behavior. Convert all drivers requesting exclusive resets to the
explicit API call so the temporary transition helpers can be removed.

No functional changes.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16785/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

When the upstream kernel pistachio_defconfig is built & tested on the
ci40 platform the current lack of these options leads to essentially
false failures when the RFS fails to mount.
Signed-off-by: NMatt Redfearn <matt.redfearn@imgtec.com>
Cc: James Hartley <james.hartley@sondrel.com>
Cc: Ionela Voinescu <ionela.voinescu@imgtec.com>
Cc: James Hartley <james.hartley@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16763/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Commit a7be6e5a ("mm: drop useless local parameters of
__register_one_node()") removes the last user of parent_node().

The parent_node() macros in both IP27 and Loongson64 are unnecessary.

Remove it for cleanup.
Reported-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NDou Liyang <douly.fnst@cn.fujitsu.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16873/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Compile USB driver statically, enable EDAC driver, and remove
deprecated options.
Signed-off-by: NSteven J. Hill <steven.hill@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16795/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Commit 1a3d5957 ("MIPS: Tidy up FPU context switching") removed
usage of ST_OFF, leaving it behind as dead code. Commit 828d1e4e
("MIPS: Remove dead define of ST_OFF") then removed the definition of
ST_OFF from r4k_switch.S as a cleanup. However the unused definition of
ST_OFF has been left behind in r2300_switch.S. Remove it.
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16239/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Move _save_fp(), _restore_fp() & _init_fpu() out of r2300_switch.S &
into r2300_fpu.S. This logically places all FP-related asm code into
r2300_fpu.S & provides consistency with R4K after the preceding commit.

Besides cleaning up this will be useful for later patches which disable
FP support.

[ralf@linux-mips.org: Fixed build issues reported by Arnd Bergmann
<arnd@arndb.de>]
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16238/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Move _save_fp(), _restore_fp(), _save_msa(), _restore_msa(),
_init_msa_upper() & _init_fpu() out of r4k_switch.S & into r4k_fpu.S.
This allows us to clean up the way in which Octeon includes the default
r4k implementations of these FP functions despite replacing resume(),
and makes CONFIG_R4K_FPU more straightforwardly represent all
configurations that have an R4K-style FPU, including Octeon.

Besides cleaning up this will be useful for later patches which disable
FP support.

[ralf@linux-mips.org: Fixed build issues reported by Arnd Bergmann
<arnd@arndb.de>]
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16237/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The kernel contains a small amount of incomplete code aimed at
supporting old R6000 CPUs. This is:

  - Unused, as no machine selects CONFIG_SYS_HAS_CPU_R6000.

  - Broken, since there are glaring errors such as r6000_fpu.S moving
    the FCSR register to t1, then ignoring it & instead saving t0 into
    struct sigcontext...

  - A maintenance headache, since it's code that nobody can test which
    nevertheless imposes constraints on code which it shares with other
    machines.

Remove this incomplete & broken R6000 CPU support in order to clean up
and in preparation for changes which will no longer need to consider
dragging the pretense of R6000 support along with them.
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16236/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>