Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NShane McDonald <mcdonald.shane@gmail.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1354/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NYoichi Yuasa <yuasa@linux-mips.org>
Cc: linux-mips <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/1322/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NYoichi Yuasa <yuasa@linux-mips.org>
Cc: linux-mips <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/1321/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

[Ralf: Remove a forgotten -Werror in Pb1200 Makefile.]
Signed-off-by: NManuel Lauss <manuel.lauss@googlemail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Manuel Lauss <manuel.lauss@googlemail.com>
Patchwork: https://patchwork.linux-mips.org/patch/1319/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Replace deprecated DMA_32BIT_MASK with DMA_BIT_MASK.  This is needed because
the new style platform makefiles will enable -Werror.

cc1: warnings being treated as errors
arch/mips/alchemy/devboards/db1200/platform.c:219: error: 'DMA_nnBIT_MASK' is deprecated
arch/mips/alchemy/devboards/db1200/platform.c:226: error: 'DMA_nnBIT_MASK' is deprecated
arch/mips/alchemy/devboards/db1200/platform.c:388: error: 'DMA_nnBIT_MASK' is deprecated
arch/mips/alchemy/devboards/db1200/platform.c:393: error: 'DMA_nnBIT_MASK' is deprecated
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
To: linux-mips@linux-mips.org
Acked-by: NManuel Lauss <manuel.lauss@googlemail.com>
Patchwork: https://patchwork.linux-mips.org/patch/1427/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Preparatory step for moving Alchemy over to new  MIPS Platform
build system support.
Signed-off-by: NManuel Lauss <manuel.lauss@googlemail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/1318/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
To: linux-mips <linux-mips@linux-mips.org>
Cc: Alexander Clouter <alex@digriz.org.uk>
Cc: Manuel Lauss <manuel.lauss@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>,
Patchwork: https://patchwork.linux-mips.org/patch/1313/
Patchwork: https://patchwork.linux-mips.org/patch/1326/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Move platform specific definitions to the platfrom directories.

Each platform shall do the following:
1) include an entry in arch/mips/Kbuild.platforms
2) add relevant definitions to arch/mips/<platform>/Platform

This commits changes ar7 to the new scheme as an example.

Introducing a platform speecific Platfrom file has following advantages:
1) decentralization of platfrom definitions
2) simplification af arch/mips/Makefile
3) force all platfrom to build with -Werror (done in arch/mips/Kbuild)

[Ralf: Remove forgotten -Werror from AR7 Makefile]
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
To: linux-mips <linux-mips@linux-mips.org>
To: Wu Zhangjin <wuzhangjin@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/1302/
Patchwork: http://patchwork.linux-mips.org/patch/1308/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Adding subdirs-ccflags-y := -Werror to arch/mips/Kbuild
let us in one go cover all files with -Werror.

In addition this allows us to remove the
individual -Werror definition in various Makefile.

Adding the definition to Kbuild as a recursive
option help us not to forget to do so.

With this change we now compile arch/mips/kernel/cpufreq with -Werror

One drawback:
When specifying a subdirectory covered by the Kbuild file like this:

    make arch/mips/kernel/

then kbuild fails to pick up the -Werror definition.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
To: linux-mips <linux-mips@linux-mips.org>
To: Wu Zhangjin <wuzhangjin@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/1301/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
To: linux-mips <linux-mips@linux-mips.org>
To: Wu Zhangjin <wuzhangjin@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/1300/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

arch/mips/sgi-ip27/ip27-klconfig.c:51: ERROR: "foo * bar" should be "foo *bar"
arch/mips/sgi-ip27/ip27-klconfig.c:63: ERROR: "foo * bar" should be "foo *bar"
arch/mips/sgi-ip27/ip27-klconfig.c:81: ERROR: "foo * bar" should be "foo *bar"
arch/mips/sgi-ip27/ip27-klconfig.c:100: ERROR: "foo * bar" should be "foo *bar"
Signed-off-by: NAndrea Gelmini <andrea.gelmini@gelma.net>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1278/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

arch/mips/pci/ops-titan-ht.c:36: ERROR: "foo * bar" should be "foo *bar"
arch/mips/pci/ops-titan-ht.c:68: ERROR: "foo * bar" should be "foo *bar"
Signed-off-by: NAndrea Gelmini <andrea.gelmini@gelma.net>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1277/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

arch/mips/math-emu/sp_tlong.c:75: ERROR: else should follow close brace '}'
Signed-off-by: NAndrea Gelmini <andrea.gelmini@gelma.net>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1276/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

arch/mips/math-emu/sp_tint.c:76: ERROR: else should follow close brace '}'
Signed-off-by: NAndrea Gelmini <andrea.gelmini@gelma.net>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1275/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

arch/mips/math-emu/sp_modf.c:32: ERROR: "foo * bar" should be "foo *bar"
Signed-off-by: NAndrea Gelmini <andrea.gelmini@gelma.net>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1273/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

arch/mips/math-emu/dp_tlong.c:75: ERROR: else should follow close brace '}'
Signed-off-by: NAndrea Gelmini <andrea.gelmini@gelma.net>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1272/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

arch/mips/math-emu/dp_tint.c:73: ERROR: else should follow close brace '}'
Signed-off-by: NAndrea Gelmini <andrea.gelmini@gelma.net>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1271/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

arch/mips/math-emu/dp_modf.c:32: ERROR: "foo * bar" should be "foo *bar"
Signed-off-by: NAndrea Gelmini <andrea.gelmini@gelma.net>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1269/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

arch/mips/dec/promcon.c:37: ERROR: that open brace { should be on the previous line
Signed-off-by: NAndrea Gelmini <andrea.gelmini@gelma.net>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1270/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

arch/mips/pmc-sierra/yosemite/ht-irq.c:38: ERROR: code indent should use tabs where possible
arch/mips/pmc-sierra/yosemite/ht-irq.c:39: ERROR: code indent should use tabs where possible
arch/mips/pmc-sierra/yosemite/ht-irq.c:40: ERROR: code indent should use tabs where possible
arch/mips/pmc-sierra/yosemite/ht-irq.c:43: ERROR: code indent should use tabs where possible
arch/mips/pmc-sierra/yosemite/ht-irq.c:44: ERROR: code indent should use tabs where possible
arch/mips/pmc-sierra/yosemite/ht-irq.c:45: ERROR: code indent should use tabs where possible
Signed-off-by: NAndrea Gelmini <andrea.gelmini@gelma.net>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1268/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Correct ASIC device register names and addresses for USB devices.
Signed-off-by: NDavid VomLehn <dvomlehn@cisco.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1258/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Replace phys_to_dma()/dma_to_phys() looping algorithm with an O(1) algorithm
The approach taken is inspired by the sparse memory implementation: take a
certain number of high-order bits off the address them, use this as an
index into a table containing an offset to the desired address and add
it to the original value. There is a table for mapping physical addresses
to DMA addresses and another one for the reverse mapping. The table sizes
depend on how fine-grained the mappings need to be; Coarser granularity
less to smaller tables.  On a processor with 32-bit physical and DMA
addresses, with 4 MIB granularity, memory usage is two 2048-byte arrays.
Each 32-byte cache line thus covers 64 MiB of address space.

Also, renames phys_to_bus() to phys_to_dma() and bus_to_phys() to
dma_to_phys() to align with kernel usage.

[Ralf: Fixed silly build breakage due to stackoverflow warning caused by
huge array on stack.]
Signed-off-by: NDavid VomLehn <dvomlehn@cisco.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1257/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

  CC      arch/mips/alchemy/mtx-1/board_setup.o
{standard input}: Assembler messages:
{standard input}:263: Error: opcode not supported on this processor: mips1 (mips1) `sync'
{standard input}:274: Error: opcode not supported on this processor: mips1 (mips1) `sync'
{standard input}:296: Error: opcode not supported on this processor: mips1 (mips1) `sync'
[...]

Any .set mipsX statement other than .set mips0 at the end of inline
assembler is a big fat bug.

Introduced by 9482eabeca315c0276ffb50026b7482481b7097b (linux-mips.org) rsp.
32fd6901 (kernel.org).

While at it, fix the same issue in

  arch/mips/alchemy/devboards/pb1000/board_setup.c
  arch/mips/alchemy/xxs1500/board_setup.c

as well.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

B43_pci_bridge is needed to use the b43 driver with brcm47xx.  Activate it
by default if PCI is available.
Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1510/Acked-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The previous patch 4a86f2d27733f610e642649aca3e82e86fca9e22 (lmo) rsp.
84a6fcb3 (kernel.org) was wrong.

The BCM47xx architecture maps the ram into a 128MB address space. It
will be spaced there as often as goes into the 128MB. Detection tries to
find the position where the same memory is found. When reading beyond
128MB the processor will throw an exception. If 128MB RAM is installed,
it will not find a memory alias because it tries to read beyond the 128MB
border. Now it just assumes 128MB installed ram if it can not find an
alias.
Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1508/Acked-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

When building with a gcc-4.4.x toolchain that is configured to produce
32-bits executables by default, we will produce __lshrti3 in sched_clock()
which is never resolved so the kernel fails to link. Unconditionally use
the inline assembly version as suggested by David Daney, which works around
the issue.
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1514/Acked-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1515/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The 'mult' element of struct clock_event_device must never be wider
than 32-bits.  If it were, it would get truncated when used by
clockevent_delta2ns() when this calls do_div().

We can meet this requirement by using clockevent_set_clock() to set
the MULT and SHIFT values.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1253/Acked-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The include is unecessary and will when building the IP35 result in
recursive header inclusion spaghetti.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

With SLAB, it works without ARCH_KMALLOC_MINALIGN, but with SLOB/SLUB,
ARCH_KMALLOC_MINALIGN is required to ensure alignment of kmalloced
buffer.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1248/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

request_region should be used with release_region, not request_mem_region.

Geert Uytterhoeven pointed out that in the case of drivers/video/gbefb.c,
the problem is actually the other way around; request_mem_region should be
used instead of request_region.

The semantic patch that finds/fixes this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r1@
expression start;
@@

request_region(start,...)

@b1@
expression r1.start;
@@

request_mem_region(start,...)

@depends on !b1@
expression r1.start;
expression E;
@@

- release_mem_region
+ release_region
  (start,E)
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

nfs_commit_inode() needs to be defined irrespectively of whether or not
we are supporting NFSv3 and NFSv4.

Allow the compiler to optimise away code in the NFSv2-only case by
converting it into an inlined stub function.
Reported-and-tested-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* master.kernel.org:/home/rmk/linux-2.6-arm:
  cyber2000fb: fix console in truecolor modes
  cyber2000fb: fix machine hang on module load
  SA1111: Eliminate use after free
  ARM: Fix Versatile/Realview/VExpress MMC card detection sense
  ARM: 6279/1: highmem: fix SMP preemption bug in kmap_high_l1_vipt
  ARM: Add barriers to io{read,write}{8,16,32} accessors as well
  ARM: 6273/1: Add barriers to the I/O accessors if ARM_DMA_MEM_BUFFERABLE
  ARM: 6272/1: Convert L2x0 to use the IO relaxed operations
  ARM: 6271/1: Introduce *_relaxed() I/O accessors
  ARM: 6275/1: ux500: don't use writeb() in uncompress.h
  ARM: 6270/1: clean files in arch/arm/boot/compressed/
  ARM: Fix csum_partial_copy_from_user()

* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
  NFS: Ensure that writepage respects the nonblock flag
  NFS: kswapd must not block in nfs_release_page
  nfs: include space for the NUL in root path

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/edid: Fix the HDTV hack sync adjustment
  drm/radeon/kms: fix radeon mid power profile reporting

Debian's ia64 autobuilders have been seeing kernel freeze or reboot
when running the gdb testsuite (Debian bug 588574): dannf bisected to
2.6.32 62eede62 "mm: ZERO_PAGE without
PTE_SPECIAL"; and reproduced it with gdb's gcore on a simple target.

I'd missed updating the gate_vma handling in __get_user_pages(): that
happens to use vm_normal_page() (nowadays failing on the zero page),
yet reported success even when it failed to get a page - boom when
access_process_vm() tried to copy that to its intermediate buffer.

Fix this, resisting cleanups: in particular, leave it for now reporting
success when not asked to get any pages - very probably safe to change,
but let's not risk it without testing exposure.

Why did ia64 crash with 16kB pages, but succeed with 64kB pages?
Because setup_gate() pads each 64kB of its gate area with zero pages.
Reported-by: NAndreas Barth <aba@not.so.argh.org>
Bisected-by: Ndann frazier <dannf@debian.org>
Signed-off-by: NHugh Dickins <hughd@google.com>
Tested-by: Ndann frazier <dannf@dannf.org>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>