SGEs that are contiguous needlessly consume driver dependent TX resources.

The lkey validation logic is enhanced to compress the SGE that ends
up in the send wqe when consecutive addresses are detected.

The lkey validation API used to return 1 (success) or 0 (fail).

The return value is now an -errno, 0 (compressed), or 1 (uncompressed).  A
additional argument is added to pass the last SQE for the compression.

Loopback callers always pass a NULL to last_sge since the optimization is
of little benefit in that situation.
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NBrian Welty <brian.welty@intel.com>
Signed-off-by: NVenkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

We move many common IB fields into the hfi1_packet structure and
set them up in a single function. This allows us to set the fields
in a single place and not deal with them throughout the driver.
Reviewed-by: NBrian Welty <brian.welty@intel.com>
Reviewed-by: NDasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDon Hiatt <don.hiatt@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When there are many RC QPs and an RDMA READ request
is sent, timeouts occur on the requester side because
of fairness among RC QPs on their relative SDMA engine
on the responder side.  This also hits write and send, but
to a lesser extent.

Complicating the issue is that the current code checks if workqueue
is congested before scheduling other QPs, however, this
check is based on the number of active entries in the
workqueue, which was found to be too big to for
workqueue_congested() to be effective.

Fix by reducing the number of active entries as revealed by
experimentation from the default of num_sdma to
HFI1_MAX_ACTIVE_WORKQUEUE_ENTRIES.  Retry counts were monitored
to determine the correct value.

Tracing to investigate any future issues is also added.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NSebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Modify core and driver components to use accessor functions
introduced to access individual fields of rdma_ah_attr
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Reviewed-by: NDon Hiatt <don.hiatt@intel.com>
Reviewed-by: NSean Hefty <sean.hefty@intel.com>
Reviewed-by: NNiranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: NDasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The driver progress routines can call cond_resched() when
a timeslice is exhausted and irqs are enabled.

If the ULP had been holding a spin lock without disabling irqs and
the post send directly called the progress routine, the cond_resched()
could yield allowing another thread from the same ULP to deadlock
on that same lock.

Correct by replacing the current hfi1_do_send() calldown with a unique
one for post send and adding an argument to hfi1_do_send() to indicate
that the send engine is running in a thread.   If the routine is not
running in a thread, avoid calling cond_resched().

CC: <stable@vger.kernel.org> # 4.7.x-
Fixes: Commit 831464ce ("IB/hfi1: Don't call cond_resched in atomic mode when sending packets")
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Move FECN and BECN related defines to common header files
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDon Hiatt <don.hiatt@intel.com>
Signed-off-by: NDasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

These inline functions improve code readability by
enabling callers to read specific fields from the
header without knowledge of byte offsets.
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDon Hiatt <don.hiatt@intel.com>
Signed-off-by: NDasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The following fields are available for filter/trace:
- wqe
- wr_id
- qpn
- qpt
- length
- idx
- ssn
- (wr)opcode
- (wr)send_flags
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The work to create a completion helper moved the translation of send
wqe operations to completion opcodes to rdmvat.

This precludes having driver dependent operations.  Make the translation
driver dependent by doing the translation in the driver prior to the
rvt_qp_swqe_complete() call using restored translation tables.

Fixes: Commit f2dc9cdc ("IB/rdmavt: Add a send completion helper")
Fixes: Commit 0771da5a ("IB/hfi1,IB/qib: Use new send completion helper")
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Rename RVT AETH defines and export in rdma/ib_hdrs.h
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDon Hiatt <don.hiatt@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Convert copy_sge and related SGE state functions to use boolean.
For determining if QP is in user mode, add helper function in rdmavt_qp.h.
This is used to determine if QP needs the last byte ordering.
While here, change rvt_pd.user to a boolean.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: NDean Luick <dean.luick@intel.com>
Signed-off-by: NBrian Welty <brian.welty@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Reduce hfi1 code footprint by using the rdmavt timers.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: NBrian Welty <brian.welty@intel.com>
Signed-off-by: NVenkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add rvt_rc_error() and rvt_comm_est() as shared functions in
rdmavt, moved from hfi1/qib logic.
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NBrian Welty <brian.welty@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Convert to use new swqe put routine.
Reviewed-by: NBrian Welty <brian.welty@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Convert cq completion returns in both rdmavt drivers
to use the new helper.
Reviewed-by: NAshutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The qp->s_cur_size field assumes that the S_BUSY bit protects
the field from modification after the slock is dropped. Scaling the
send engine to multiple cores would break that assumption.

Correct the issue by carrying the payload size in the txreq structure.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDon Hiatt <don.hiatt@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch consolidates the node GUIDs and the port GUID handling
and unifies access to these items. The knowledge of hfi1 GUIDs'
design and their location are kept in accessors to centralize access.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: NBrian Welty <brian.welty@intel.com>
Signed-off-by: NJakub Pawlak <jakub.pawlak@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The code no longer uses tasklets for the send engine. However it does
use a tasklet for sdma but the send routines use a workqueue now days.
Update the comments to reflect that. Make things more generic with
saying "send engine" because that is what is being referred to.
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Use common header file structs, defines, and accessors
in the drivers.  The old declarations are removed.

The repositioning of the includes allows for the removal
of hfi1_message_header and replaces its use with ib_header.

Also corrected are two issues with set_armed_to_active():
- The "packet" parameter is now a pointer as it should have been
- The etype is validated to insure that the header is correct
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: NDon Hiatt <don.hiatt@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

hfi1_pio_header should really be called hfi1_sdma_header
as it is only used for sdma transmits.
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: NDean Luick <dean.luick@intel.com>
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDon Hiatt <don.hiatt@intel.com>
Signed-off-by: NDasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

struct ahg_ib_header has no header specific information.
Rename it to struct hfi1_ahg_info
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: NDean Luick <dean.luick@intel.com>
Signed-off-by: NDasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: NDon Hiatt <don.hiatt@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

sde and hfi1_ib_header are not used anymore.
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: NDean Luick <dean.luick@intel.com>
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: NDon Hiatt <don.hiatt@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Hanging has been observed while writing a file over NFSoRDMA. Dmesg on
the server contains messages like these:

[  931.992501] svcrdma: Error -22 posting RDMA_READ
[  952.076879] svcrdma: Error -22 posting RDMA_READ
[  982.154127] svcrdma: Error -22 posting RDMA_READ
[ 1012.235884] svcrdma: Error -22 posting RDMA_READ
[ 1042.319194] svcrdma: Error -22 posting RDMA_READ

Here is why:

With the base memory management extension enabled, FRMR is used instead
of FMR. The xprtrdma server issues each RDMA read request as the following
bundle:

(1)IB_WR_REG_MR, signaled;
(2)IB_WR_RDMA_READ, signaled;
(3)IB_WR_LOCAL_INV, signaled & fencing.

These requests are signaled. In order to generate completion, the fast
register work request is processed by the hfi1 send engine after being
posted to the work queue, and the corresponding lkey is not valid until
the request is processed. However, the rdmavt driver validates lkey when
the RDMA read request is posted and thus it fails immediately with error
-EINVAL (-22).

This patch changes the work flow of local operations (fast register and
local invalidate) so that fast register work requests are always
processed immediately to ensure that the corresponding lkey is valid
when subsequent work requests are posted. Local invalidate requests are
processed immediately if fencing is not required and no previous local
invalidate request is pending.

To allow completion generation for signaled local operations that have
been processed before posting to the work queue, an internal send flag
RVT_SEND_COMPLETION_ONLY is added. The hfi1 send engine checks this flag
and only generates completion for such requests.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NJianxin Xiong <jianxin.xiong@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

In order to support extended memory management support, add send side
processing of work requests of type IB_WR_REG_MR, IB_WR_LOCAL_INV, and
IB_WR_SEND_WITH_INV. The first two are local operations and are supported
for both RC and UC. Send with invalidate is only supported for RC because
the corresponding IB opcodes are not defined for UC.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NJianxin Xiong <jianxin.xiong@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The TODO list for the hfi1 driver was completed during 4.6. In addition
other objections raised (which are far beyond what was in the TODO list)
have been addressed as well. It is now time to remove the driver from
staging and into the drivers/infiniband sub-tree.
Reviewed-by: NJubin John <jubin.john@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The dual lock patch moved locking around and missed an issue
with handling irq flags when processing UD loopback
packets.  This issue was revealed by smatch.

Fix for both qib and hfi1 to pass the saved flags to the UD request
builder and handle the changes correctly.

Fixes: 46a80d62 ("IB/qib, staging/rdma/hfi1: add s_hlock for use in post send")
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch fixed the problem where the driver might reschedule in atomic
mode when sending packets. This is due to the fact that the call to
cond_resched() in hfi1_do_send() might occur in atomic mode and a check is
required to avoid the warning message:
    "kernel: BUG: scheduling while atomic: swapper/2/0/0x10000100."
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NKaike Wan <kaike.wan@intel.com>
Signed-off-by: NJubin John <jubin.john@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The break statement was unintentionally removed in this patch
commit 41ca419abc0ca7ee65d765408cdc1a7fed2897a3
("staging/rdma/hfi1: Remove hfi1 MR and hfi1 specific qp type")
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NHarish Chegondi <harish.chegondi@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Fix the header by moving the copyright notice out of the license text
and to the top of the header. Also, update the copyright date.
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NJubin John <jubin.john@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Fix code alignment to fix checkpatch check:
CHECK: Alignment should match open parenthesis
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NJubin John <jubin.john@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Remove the space after a cast to fix checkpatch check:
CHECK: No space is necessary after a cast
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NJubin John <jubin.john@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The send engine wasn't correctly handling
pre-built packets, and worse, the pointer to
a packet state's txreq wasn't initialized correctly.

To fix:
- all waiters need to save any prebuilt packets
  (smda waits already did)
- the progress routine needs to handle a QPs prebuilt packet
  and initialize the txreq pointer properly

To keep SDMA working, the dma send code needs to see if
a packet has been built already. If not the code will build
it.
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Instead of writing the header into a buffer then copying it into another
buffer to be sent, remove that memcpy and instead build the header directly
into the tx request that will be sent.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NVennila Megavannan <vennila.megavannan@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The patch separates the txreq defines into new files, one for
verbs and one for sdma.

The verbs_txreq implementation handles the setup and teardown
of the txreq cache, so the register routine is changed to call
the new init/exit routines.

This patch allows for followup patches enhance the send engine.
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch adds an additional lock to reduce contention on the s_lock.

This lock is used in post_send() so that the post_send is not
serialized with the send engine and other send related processing.

To do this the s_next_psn is now maintained on post_send() while
post_send() related fields are moved to a new cache line.  There is
an s_avail maintained for the post_send() to mitigate trading cache
lines with the send engine.  The lock is released/acquired around
releasing the just built packet to the egress mechanism.
Reviewed-by: NJubin John <jubin.john@intel.com>
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDean Luick <dean.luick@intel.com>
Signed-off-by: NHarish Chegondi <harish.chegondi@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The patch series which added a new API for the RNR timer did not include an
updated call in the loopback path. RC/UC RNR loopback would be broken
without this.
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch is a prerequisite for adding a separate lock
for post send.

The timing of updating s_last needs to be before returning
any send completion to avoid a race between a poll cq seeing
a completion and the post send checking for a full queue.
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Copy the last 8 bytes of user mode RC WRITE_ONLY and WRITE_LAST
opcodes separately from the rest of the data.

It is a de-facto standard for some MPI implementations to use a
poll on the last few bytes of a verbs message to indicate that
the message has been received rather than follow the required
function method.  The driver uses the kernel memcpy routine, which
becomes "rep movsb" on modern machines.  This copy, while very
fast, does not guarantee in-order copy completion and the result
is an occasional perceived corrupted packet.  Avoid the issue by
splitting the last 8 bytes to copy from the verbs opcodes where it
matters and performing an in-order byte copy.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDean Luick <dean.luick@intel.com>
Signed-off-by: NJubin John <jubin.john@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch fixes the fairness issues in QP scheduling
- the timeout for cond_resched is changed to a ratio of
qp->timeout_jiffies
- workqueue_congested is used to determine if qp needs to
reschedule itself
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NVennila Megavannan <vennila.megavannan@intel.com>
Signed-off-by: NJubin John <jubin.john@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

A patch to fix fairness issues in QP scheduling requires
n_send_schedule counter to be converted to a per cpu counter to reduce
cache misses.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NVennila Megavannan <vennila.megavannan@intel.com>
Signed-off-by: NJubin John <jubin.john@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>