o Query adapter DCB capabilities and  populate local data structures
  with relevant information.

o Add QLCNIC_DCB to Kconfig for enabling/disabling DCB.
Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ben Hutchings says:

====================
1. Refactoring and cleanup in preparation for new hardware support.
2. Some bug fixes for firmware completion handling.  (They're not known
to cause real problems, otherwise I'd be submitting these for net and
stable.)
3. Update to the firmware protocol (MCDI) definitions.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Conflicts:
	drivers/net/wireless/iwlwifi/pcie/trans.c
	include/linux/inetdevice.h

The inetdevice.h conflict involves moving the IPV4_DEVCONF values
into a UAPI header, overlapping additions of some new entries.

The iwlwifi conflict is a context overlap.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Boris BREZILLON says:

====================
net/cadence/macb: add support for dt phy definition

This patch series adds support for ethernet phy definition using device
tree.

This may help in moving some at91 boards to dt (some of them define an
interrupt pin).

Tested on samad31ek.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch describe the phy used on atmel sama5d3 mother board:
 - phy address
 - phy interrupt pin
Signed-off-by: NBoris BREZILLON <b.brezillon@overkiz.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The macb driver only handle PHY description through platform_data
(macb_platform_data).
Thus, when using dt you cannot define phy properties like phy address or
phy irq pin.

This patch makes use of the of_mdiobus_register to add support for
phy device definition using dt.
A fallback to the autoscan procedure is added in case there is no phy
devices defined in dt.
Signed-off-by: NBoris BREZILLON <b.brezillon@overkiz.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Eric Dumazet says that my previous fix for an ERR_PTR dereference
(ea857f28 'ipip: dereferencing an ERR_PTR in ip_tunnel_init_net()')
could be racy and suggests the following fix instead.
Reported-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix to return a negative error code in the add bond vlan ids error
handling case instead of 0, as done elsewhere in this function.

Introduced by commit 1ff412ad.
(bonding: change the bond's vlan syncing functions with the standard ones)
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: NNikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge SFC driver changes from Ben Hutchings.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge networking fixes from David Miller:

 1) Revert Johannes Berg's genetlink locking fix, because it causes
    regressions.

    Johannes and Pravin Shelar are working on fixing things properly.

 2) Do not drop ipv6 ICMP messages without a redirected header option,
    they are legal.  From Duan Jiong.

 3) Missing error return propagation in probing of via-ircc driver.
    From Alexey Khoroshilov.

 4) Do not clear out broadcast/multicast/unicast/WOL bits in r8169 when
    initializing, from Peter Wu.

 5) realtek phy driver programs wrong interrupt status bit, from
    Giuseppe CAVALLARO.

 6) Fix statistics regression in AF_PACKET code, from Willem de Bruijn.

 7) Bridge code uses wrong bitmap length, from Toshiaki Makita.

 8) SFC driver uses wrong indexes to look up MAC filters, from Ben
    Hutchings.

 9) Don't pass stack buffers into usb control operations in hso driver,
    from Daniel Gimpelevich.

10) Multiple ipv6 fragmentation headers in one packet is illegal and
    such packets should be dropped, from Hannes Frederic Sowa.

11) When TCP sockets are "repaired" as part of checkpoint/restart, the
    timestamp field of SKBs need to be refreshed otherwise RTOs can be
    wildly off.  From Andrey Vagin.

12) Fix memcpy args (uses 'address of pointer' instead of 'pointer') in
    hostp driver.  From Dan Carpenter.

13) nl80211hdr_put() doesn't return an ERR_PTR, but some code believes
    it does.  From Dan Carpenter.

14) Fix regression in wireless SME disconnects, from Johannes Berg.

15) Don't use a stack buffer for DMA in zd1201 USB wireless driver, from
    Jussi Kivilinna.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (33 commits)
  ipv4: expose IPV4_DEVCONF
  ipv6: handle Redirect ICMP Message with no Redirected Header option
  be2net: fix disabling TX in be_close()
  Revert "genetlink: fix family dump race"
  hso: Fix stack corruption on some architectures
  hso: Earlier catch of error condition
  sfc: Fix lookup of default RX MAC filters when steered using ethtool
  bridge: Use the correct bit length for bitmap functions in the VLAN code
  packet: restore packet statistics tp_packets to include drops
  net: phy: rtl8211: fix interrupt on status link change
  r8169: remember WOL preferences on driver load
  via-ircc: don't return zero if via_ircc_open() failed
  macvtap: Ignore tap features when VNET_HDR is off
  macvtap: Correctly set tap features when IFF_VNET_HDR is disabled.
  macvtap: simplify usage of tap_features
  tcp: set timestamps for restored skb-s
  bnx2x: set VF DMAE when first function has 0 supported VFs
  bnx2x: Protect against VFs' ndos when SR-IOV is disabled
  bnx2x: prevent VF benign attentions
  bnx2x: Consider DCBX remote error
  ...

Merge fixes from Andrew Morton:
 "A few fixes.  One is a licensing change and I don't do licensing, so
  please eyeball that one"

Licensing eye-balled.

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  lib/lz4: correct the LZ4 license
  memcg: get rid of swapaccount leftovers
  nilfs2: fix issue with counting number of bio requests for BIO_EOPNOTSUPP error detection
  nilfs2: remove double bio_put() in nilfs_end_bio_write() for BIO_EOPNOTSUPP error
  drivers/platform/olpc/olpc-ec.c: initialise earlier

The LZ4 code is listed as using the "BSD 2-Clause License".
Signed-off-by: NRichard Laager <rlaager@wiktel.com>
Acked-by: NKyungsik Lee <kyungsik.lee@lge.com>
Cc: Chanho Min <chanho.min@lge.com>
Cc: Richard Yao <ryao@gentoo.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
[ The 2-clause BSD can be just converted into GPL, but that's rude and
  pointless, so don't do it   - Linus ]
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The swapaccount kernel parameter without any values has been removed by
commit a2c8990a ("memsw: remove noswapaccount kernel parameter") but
it seems that we didn't get rid of all the left overs.

Make sure that menuconfig help text and kernel-parameters.txt are clear
about value for the paramter and remove the stalled comment which is not
very much useful on its own.
Signed-off-by: NMichal Hocko <mhocko@suse.cz>
Reported-by: NGergely Risko <gergely@risko.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix the issue with improper counting number of flying bio requests for
BIO_EOPNOTSUPP error detection case.

The sb_nbio must be incremented exactly the same number of times as
complete() function was called (or will be called) because
nilfs_segbuf_wait() will call wail_for_completion() for the number of
times set to sb_nbio:

  do {
      wait_for_completion(&segbuf->sb_bio_event);
  } while (--segbuf->sb_nbio > 0);

Two functions complete() and wait_for_completion() must be called the
same number of times for the same sb_bio_event.  Otherwise,
wait_for_completion() will hang or leak.
Signed-off-by: NVyacheslav Dubeyko <slava@dubeyko.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Tested-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove double call of bio_put() in nilfs_end_bio_write() for the case of
BIO_EOPNOTSUPP error detection.  The issue was found by Dan Carpenter
and he suggests first version of the fix too.
Signed-off-by: NVyacheslav Dubeyko <slava@dubeyko.com>
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Tested-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Being a low-level component, various drivers (e.g.  olpc-battery) assume
that it is ok to communicate with the OLPC Embedded Controller during
probe.  Therefore the OLPC EC driver must be initialised before other
drivers try to use it.  This was the case until it was recently moved
out of arch/x86 and restructured around commits ac250415 ("Platform:
OLPC: turn EC driver into a platform_driver") and 85f90cf6 ("x86:
OLPC: switch over to using new EC driver on x86").

Use arch_initcall so that olpc-ec is readied earlier, matching the
previous behaviour.

Fixes a regression introduced in Linux-3.6 where various drivers such as
olpc-battery and olpc-xo1-sci failed to load due to an inability to
communicate with the EC.  The user-visible effect was a lack of battery
monitoring, missing ebook/lid switch input devices, etc.
Signed-off-by: NDaniel Drake <dsd@laptop.org>
Cc: Andres Salomon <dilinger@queued.net>
Cc: Paul Fox <pgf@laptop.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

make the Freescale ethernet driver get, prepare and enable the FEC clock
during probe(); disable and unprepare the clock upon remove(), put is
done by the devm approach; hold a reference to the clock over the period
of use.

clock lookup is non-fatal as not all platforms provide clock specs in
their device tree; failure to enable specified clocks is fatal.
Signed-off-by: NGerhard Sittig <gsi@denx.de>
Signed-off-by: NAnatolij Gustschin <agust@denx.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since commit 720a43ef
(drivers:net: Remove unnecessary OOM messages after netdev_alloc_skb)
there is a build warning:

drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c: In function 'tx_skb_align_workaround':
drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c:586:26: warning: unused variable 'fep'

Fix it.
Signed-off-by: NGerhard Sittig <gsi@denx.de>
Signed-off-by: NAnatolij Gustschin <agust@denx.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We can simply use the %pISc format specifier that was recently added
and thus remove some code that distinguishes between IPv4 and IPv6.
Signed-off-by: NDaniel Borkmann <dborkman@redhat.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Marc Kleine-Budde says:

====================
another pull-request for net-next. It consists of two patches by Libo
Chen, the at91 and flexcan driver make use of platform_set_drvdata()
rather than open coding it. Chen Gang improves the error checking in
the c_can_platform driver's probe function.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is needed when the cpsw driver is built as module.
Signed-off-by: NDaniel Mack <zonque@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

IP sends device configuration (see inet_fill_link_af) as an array
in the netlink information, but the indices in that array are not
exposed to userspace through any current santized header file.

It was available back in 2.6.32 (in /usr/include/linux/sysctl.h)
but was broken by:
  commit 02291680
  Author: Eric W. Biederman <ebiederm@xmission.com>
  Date:   Sun Feb 14 03:25:51 2010 +0000

    net ipv4: Decouple ipv4 interface parameters from binary sysctl numbers

Eric was solving the sysctl problem but then the indices were re-exposed
by a later addition of devconf support for IPV4

  commit 9f0f7272
  Author: Thomas Graf <tgraf@infradead.org>
  Date:   Tue Nov 16 04:32:48 2010 +0000

    ipv4: AF_INET link address family

Putting them in /usr/include/linux/ip.h seemed the logical match
for the DEVCONF_ definitions for IPV6 in /usr/include/linux/ip6.h
Signed-off-by: NStephen Hemminger <stephen@networkplumber.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

rfc 4861 says the Redirected Header option is optional, so
the kernel should not drop the Redirect Message that has no
Redirected Header option. In this patch, the function
ip6_redirect_no_header() is introduced to deal with that
condition.
Signed-off-by: NDuan Jiong <duanj.fnst@cn.fujitsu.com>
Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org>

commit fba87559 ("disable TX in be_close()") disabled TX in be_close()
to protect be_xmit() from touching freed up queues in the AER recovery
flow.  But, TX must be disabled *before* cleaning up TX completions in
the close() path, not after. This allows be_tx_compl_clean() to free up
all TX-req skbs that were notified to the HW.
Signed-off-by: NSathya Perla <sathya.perla@emulex.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The tcp_probe currently only supports analysis of IPv4 connections.
Therefore, it would be nice to have IPv6 supported as well. Since we
have the recently added %pISpc specifier that is IPv4/IPv6 generic,
build related sockaddress structures from the flow information and
pass this to our format string. Tested with SSH and HTTP sessions
on IPv4 and IPv6.
Signed-off-by: NDaniel Borkmann <dborkman@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patches fixes a rather unproblematic function signature mismatch
as the const specifier was missing for the th variable; and next to
that it adds a build-time assertion so that future function signature
mismatches for kprobes will not end badly, similarly as commit 22222997
("net: sctp: add build check for sctp_sf_eat_sack_6_2/jsctp_sf_eat_sack")
did it for SCTP.
Signed-off-by: NDaniel Borkmann <dborkman@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It is helpful to sometimes know the TCP window sizes of an established
socket e.g. to confirm that window scaling is working or to tweak the
window size to improve high-latency connections, etc etc. Currently the
TCP snooper only exports the send window size, but not the receive window
size. Therefore, also add the receive window size to the end of the
output line.
Signed-off-by: NDaniel Borkmann <dborkman@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Steffen Klassert says:

====================
1) Some constifications, from Mathias Krause.

2) Catch bugs if a hold timer is still active when xfrm_policy_destroy()
   is called, from Fan Du.

3) Remove a redundant address family checking, from Fan Du.

4) Make xfrm_state timer monotonic to be independent of system clock changes,
   from Fan Du.

5) Remove an outdated comment on returning -EREMOTE in the xfrm_lookup(),
   from Rami Rosen.

Please pull or let me know if there are problems.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The stack currently detects reordering and avoid spurious
retransmission very well. However the throughput is sub-optimal under
high reordering because cwnd is increased only if the data is deliverd
in order. I.e., FLAG_DATA_ACKED check in tcp_ack().  The more packet
are reordered the worse the throughput is.

Therefore when reordering is proven high, cwnd should advance whenever
the data is delivered regardless of its ordering. If reordering is low,
conservatively advance cwnd only on ordered deliveries in Open state,
and retain cwnd in Disordered state (RFC5681).

Using netperf on a qdisc setup of 20Mbps BW and random RTT from 45ms
to 55ms (for reordering effect). This change increases TCP throughput
by 20 - 25% to near bottleneck BW.

A special case is the stretched ACK with new SACK and/or ECE mark.
For example, a receiver may receive an out of order or ECN packet with
unacked data buffered because of LRO or delayed ACK. The principle on
such an ACK is to advance cwnd on the cummulative acked part first,
then reduce cwnd in tcp_fastretrans_alert().
Signed-off-by: NYuchung Cheng <ycheng@google.com>
Acked-by: NNeal Cardwell <ncardwell@google.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge in a fix for RX MAC address filter programming bug in the sfc
driver.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit bd61224b (SolutionEngine7724: fix Ether
support) has a typo in the 'phy_interface' field name of the platform data which
causes build error -- fix it.
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 06a64f91 (SH7619: fix Ether support)  has
a typo in the 'phy_interface' field name of the platform data which causes build
error -- fix it.
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For some reason, my PCIe RTL8111E onboard NIC on a GA-Z68X-UD3H-B3
motherboard reads as FFs when reading from MMIO with a block size
larger than 7. Therefore change to reading blocks of four bytes.

Ben Hutchings noted that the buffer is large enough to hold all
registers, so now all registers are read.
Signed-off-by: NPeter Wu <lekensteyn@gmail.com>
Acked-by: NFrancois Romieu <romieu@fr.zoreil.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts commit 58ad436f.

It turns out that the change introduced a potential deadlock
by causing a locking dependency with netlink's cb_mutex. I
can't seem to find a way to resolve this without doing major
changes to the locking, so revert this.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Acked-by: NPravin B Shelar <pshelar@nicira.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull x86 platform driver fixes from Matthew Garrett:
 "Three trivial fixes - the first reverts a patch that's broken some
  other devices (again - I'm trying to figure out a clean way to
  implement this), the other two fix minor issues in the sony-laptop
  driver"

* 'linux-next' of git://cavan.codon.org.uk/platform-drivers-x86:
  Revert "hp-wmi: Enable hotkeys on some systems"
  sony-laptop: Fix reporting of gfx_switch_status
  sony-laptop: return a negative error code in sonypi_compat_init()

Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates

This series contains updates to igb and e1000e.

Akeem provides 3 igb patches, the first resets the link when EEE is enabled
or disabled if the link is up.  His second patch changes a register read
which normally stores of the read value to "just-read" so that hardware
can accurately latch the register read.  Lastly, he adds rcu_lock to avoid
a possible race condition with igb_update_stats function.

Mitch provides a fix for SR-IOV, where MSI-X interrupts are required, so
make sure that MSI-X is enabled before allowing the user to turn on SR-IOV.

Alex's igb patch make it so that we limit the lower bound for max_frame_size
to the size of a standard Ethernet frame.  This allows for feature parity
with other Intel based drivers such as ixgbe.

Carolyn adds a SKU for a flashless i210 device and a fix for get_fw_version()
so that it works for all parts for igb.  In addition, she has 2 igb patches
to refactor NVM code to accommodate devices with no flash.  Lastly, she
adds code to check for the failure of pci_disable_link_state() to attempt
to work around a problem found with some systems.

Laura provides the remaining 2 igb patches.  One removing the hard-coded
value for the size of the RETA indirection table, and creates a macro instead
for the RETA indirection table.  The second adds the ethtool callbacks
necessary to change the RETA indirection table from userspace.

Bruce fixes a whitespace issue in a recent commit and resolves a jiffies
comparison warning by using time_after().

Li provides a fix for e1000e to avoid a kernel crash on shutdown by adding
one more check in e1000e_shutdown().  This is due to e1000e_shutdown()
trying to clear correctable errors on the upstream P2P bridge, when under
some cases we do not have the upstream P2P bridge.

v2:
 - fixed patch 11 conditional statement from < to <= based on feedback
   from Ben Hutchings
 - fixed patch 12 patch description (adding the commit summary) based
   on feedback from Sergei Shtylyov
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull ARM SoC fixes from Olof Johansson:
 "A handful of fixes for 3.11 are still trickling in.  These are:
   - A couple of fixes for older OMAP platforms
   - Another few fixes for at91 (lateish due to European summer
     vacations)
   - A late-found problem with USB on Tegra, fix is to keep VBUS
     regulator on at all times
   - One fix for Exynos 5440 dealing with CPU detection
   - One MAINTAINERS update"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: tegra: always enable USB VBUS regulators
  ARM: davinci: nand: specify ecc strength
  ARM: OMAP: rx51: change musb mode to OTG
  ARM: OMAP2: fix musb usage for n8x0
  MAINTAINERS: Update email address for Benoit Cousson
  ARM: at91/DT: fix at91sam9n12ek memory node
  ARM: at91: add missing uart clocks DT entries
  ARM: SAMSUNG: fix to support for missing cpu specific map_io
  ARM: at91/DT: at91sam9x5ek: fix USB host property to enable port C

Pull device tree fix from Rob Herring:
 "For DT unflattening, add missing memory initialization.

  This is needed for arches like PPC that use memblock_alloc.  This
  appears to have been an issue for some time, but is a somewhat limited
  usecase of OF_DYNAMIC"

* tag 'devicetree-fixes-for-3.11' of git://sources.calxeda.com/kernel/linux:
  of: fdt: fix memory initialization for expanded DT