This patch removes compat code for older kernel versions.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Cc: <thomas@winischhofer.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

mdacon incorrectly detects MDA hardware on systems without such graphics card.

One may load this module by chance, for example when doing some systematical
module-testing, and if there is no Monochrome Display Adapter attached ,
module init renders vc1-16 completely unusable.

I and others have run into this more than once.  see [Bug 224522 - modprobe
mdacon freezes machine -> https://bugzilla.novell.com/show_bug.cgi?id=224522 ]
for example

Apparently  proper MDA detection seems to be broken for a long time - seems to
be related to those #ifdef TEST_MDA_B statements added by Edward Betts.

this commit back in 2002 made things even worse :
http://git.kernel.org/?p=linux/kernel/git/tglx/history.git;a=commit;h=c72757b49c88914433244757fb4967fc63546685

It changed default vc allocation from 13-16 to 1-16 for no apparent reason
(!?) , and with that (and without X), mdacon grabs the vc you`re currently
sitting on and locks you out.

this is from Kconfig :
>config MDA_CONSOLE
>        depends on !M68K && !PARISC && ISA
>        tristate "MDA text console (dual-headed) (EXPERIMENTAL)"
>        ---help---
>          Say Y here if you have an old MDA or monochrome Hercules graphics
>          adapter in your system acting as a second head ( = video card). You
>          will then be able to use two monitors with your Linux system. Do not
>          say Y here if your MDA card is the primary card in your system; the
>          normal VGA driver will handle it.

As we can see mdacon is just meant as an additional driver for dual-head
setup, and since kernel 2.4.36 still defaults to vc13-16 , setting the default
back to that value again shouldn`t do any harm.

Hereby i'm reverting that change, setting default back to to vc13-16 again.

Besides the fact that mdacon may be rarely or never be used these days and
could perhaps put to trash anyway (pre-dinosaur hardware!), indeed this is not
a real solution, but at least it removes the unfortunate side-effect of
messing up the vc you`re working on.
Signed-off-by: NRoland Kletzing <devzero@web.de>
Cc: James Simmons <jsimmons@infradead.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Tim Schmielau <tim@physik3.uni-rostock.de>
Cc: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The tridentfb driver should handle now all chipsets handled by the cyblafb
driver.  Remove the message which claims that support will be removed.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add imageblit acceleration for the Blade3D family of cores.  The code is
based on code from the cyblafb driver.

It is a step toward assimilating back the cyblafb driver into the
tridentfb driver.  The cyblafb driver handles a subfamily of the Trident
Blade3d cores.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch fixes following problems:
- does not allow the m parameter to reach 0 as
  it locks the graphics core (power cycle needed)
- for the newer chips (with new clock registers)
  does not allow of n / m ratio below 4 as it gives
  unstable image on the Blade3D core
- extend shift parameter (k) range  to 2 for the newer
  chips to cope with the n /m >= 4 limit at low resolution
  (bandwidth) modes
- prefer modes with higher n / m ratio (higher k values)
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The Trident cards uses only 20-bit address of screen start in double
words.  This allows addressing for only 4MB of video memory so check this.

Also remove some redundant checks and assignments.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix depth setting for 8 bpp mode.  The nice 224 color logo is not
displayed in 8 bpp depth without this fix.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch fixes two problems when acceleration is enabled:

 - console switch from the Xorg locks up the computer
   because the Xorg code locks some registers and disables
   the mmio mode, so reenable these in the
   tridentfb_set_par() and enable_mmio()

 - blacklist the Image975 chipset from setting PCI burst
   mode. This helps with random lock ups of the
   framebuffer on this chip. The same fix is probably
   needed for the Xorg as well.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch contains general source code improvments:
 - more simple functions are inline
 - removes some meaningless output and the VERSION
   string as it is no use
 - eng_par is moved into the tridentfb_par
 - removed small section of code for CyberBladeXPAi1
   which is maybe right for only one resolution
   and refresh rate and is probably redundant now
 - other minor improvements
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch replaces deprecated constant FB_ACCELF_TEXT with
FBINFO_HWACCEL_DISABLED and adds constants for Trident families of
accelerators.

The FBINFO_HWACCEL_DISABLED is correctly used so noaccel parameter works
now.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch fixes few issues related to timings and pixclock generation:

 - disallow the pixclocks with numerator lower than
   double denominator. This fixes display instability
   for some modes.
 - choose the pixelclock with the highest
   numerator and denominator values. This improve
   image quality and fixes display instability
   for some modes.
 - make interlaced modes work.
 - set synchronization pulses polarization
   correctly.
 - horizontal synchronization timing are now
   the same as generated by X.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch fixes two problems when acceleration is enabled:

 - bit for bitblt direction is corrected
   so scrolling down works as expected on 3DImage chips

 - initialization of acceleration is done later
   this helps with initial console malfuntion (on Blade3D
   chips) well documented here:
   http://marc.info/?l=linux-fbdev-users&m=111386953124478&w=2Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch brings various acceleration improvements:
- set  copyarea/fillrect for non-accelerated framebuffer (fix)
- remove 15 bpp depth handling to simplify code as it hardly
  works (15 bpp handling was obviously missing in some switches)
- add fb_sync call and move waiting before accelerated function
  to make acceleration more asynchronous to cpu (few % of speed
  improvement)
- add cpu_relax() call in waiting loops
- make longer register names and name more registers
- move registers' definition to header
- general code improvements (shortening, simplifying)
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch adds acceleration for TGUI 9440 and 96xx chips.  These chips
requires line length to be power of 2, so this is also changed.

It also moves the troubling enable_mmio() function to its final
destination.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The TGUI 9440 requires doubling clock for 16bpp (hi-color) modes.

The patch also moves back enable_mmio() call to the right position.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Do not overwrite bits which contain memory type settings.  It removes
noise pixels ("snow") on Blade3D and 3DImage chips.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Do some additional checks (like pixelclock versus ramdac speed) to
eliminate modes which do not work.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Initialize the pseudo_palette pointer properly.  This fixes crash when
16bpp or 32bpp mode is selected.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add support for TGUI 9440 chip.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Improved values for some registers after Xorg Trident driver.  The main
problem was that values set by BIOS have been ignored.

This patch completely remove random pixels ("snow") on the TGUI 9680 and
9440 (not supported yet by the driver).  It does not help with the "snow"
on 3DImage and Blade3D cards.

There is also small improvement in timing calculations (hblank start and
vblank start)
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add missing release of allocated fb_info structure and move enable_mmio() to
fix error path.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The Xorg code shows that Trident models 9660, 9680 and 9682 require a
different clock setting method.  Add the second clock setting method for older
models.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use the mmio outb function instead of direct one.  The mmio registers are
already mapped (in the probe function).
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix broken timings calculations. This patch helps with following
problems:
 - no left part of screen visible (up to half of the screen)
 - monitor's frequencies are not the ones intended for selected modes
 - if mode with resoultion y > 1024 is selected at least once then
   all modes with y < 1024 are "out of sync" (no display)
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Make use of functions and constants from the vga.h header to compact the code
and make it more readable.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch moves acceleration hooks into the tridentfb_par structure and
removes global hooks.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch converts the is_blade() and is_xp() macros into local functions.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch moves flat panel indicator into tridentfb_par structure and removes
related global variables and macros.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch moves the chip_id into tridentfb_par structure and removes global
chip_id related constants.

It also bumps version of the driver to 0.7.9
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch moves pseudo palette int tridentfb_par structure and removes global
default_var.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch converts fb_info structure from global variable to allocatable one.

The global default_par is moved into function variable.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch replaces macros with static functions and puts tridentfb_par
pointer as the first argument of these functions.  These is a step toward
multihead support.

Additionally, bogus TRIDENT_MMIO define is removed as the driver supports
graphics cards only through the mmio mode.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Basic FB driver for the carmine chip.  The driver registers two FB devices for
the two possible screens.  The DRAM settings can be be switched via Kconfig
(between eval board and custom).
Signed-off-by: NSebastian Siewior <bigeasy@linutronix.de>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Implement the ioctls RTC_PIE_ON, RTC_PIE_OFF, RTC_IRQP_SET and
RTC_IRQP_READ in the standard RTC way.

Thanks Dave for noticing it.
Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Cc: David Brownell <david-b@pacbell.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This fixes kernel http://bugzilla.kernel.org/show_bug.cgi?id=11112 (bogus
RTC update IRQs reported) for rtc-cmos, in two ways:

  - When HPET is stealing the IRQs, use the first IRQ to grab
    the seconds counter which will be monitored (instead of
    using whatever was previously in that memory);

  - In sane IRQ handling modes, scrub out old IRQ status before
    enabling IRQs.

That latter is done by tightening up IRQ handling for rtc-cmos everywhere,
also ensuring that when HPET is used it's the only thing triggering IRQ
reports to userspace; net object shrink.

Also fix a bogus HPET message related to its RTC emulation.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Report-by: NW Unruh <unruh@physics.ubc.ca>
Cc: Andrew Victor <avictor.za@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This fixes kernel http://bugzilla.kernel.org/show_bug.cgi?id=11112 (bogus
RTC update IRQs reported) for rtc-at91rm9200 by scrubbing old IRQ status
before enabling IRQs.

It also removes nonfunctional periodic IRQ support from this driver;
only update IRQs are reported, or provided by the hardware.

I suspect some other RTCs probably have versions of #11112; it's easy to
overlook, since most non-RTC drivers don't care about spurious IRQs:
they're not reported to userspace.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Report-by: NW Unruh <unruh@physics.ubc.ca>
Cc: Andrew Victor <avictor.za@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The rtc-s3c.c driver has been using its own ioctl() handling to deal with
alarm and periodic interrupts to handle what should now be done with the
rtc core code.

Change to using the .irq_set_freq and .irq_set_state driver entries and
remove the .ioctl handling.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Acked-by: NAlessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add the relevant __devinit and __devexit attributes to the rtc-s3c driver.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Acked-by: NAlessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Resolve http://bugzilla.kernel.org/show_bug.cgi?id=11051 and other bugs
related to the way the HPET glue code in rtc-cmos was incomplete and
inconsistent:

 * Switch the approach so that the basic driver code flow isn't
   changed by having HPET ... instead, just have HPET shadow the
   RTC_CONTROL irq enables and RTC_FREQ_SELECT data.  It's only
   coping with IRQ thievery, after all.

 * Do that consistently (!!) to avoid problems when the HPET code
   is out of sync with the real RTC intent.  Examples include:

   - cmos_procfs(), which now reports correct data

   - cmos_irq_set_state() ... also removing the previous PIE_{ON,OFF}
     ioctl support so only one code path manages "periodic" IRQs

   - cmos_do_shutdown() ... currently a "just in case" change.

   - cmos_suspend() and cmos_resume() ... also handling a bug that
     was specific to HPET's IRQ thievery, where the alarm wasn't
     disabled after waking the system

 * Always call that HPET code under the RTC spinlock (it doesn't do
   its own locking)

Also clean up the HPET glue:

 * Add some comments explaining what's going on.

 * Switch to having just one #ifdef for the HPET glue, and inline
   functions (not #defines) to avoid some compiler warnings.

 * Have the probe message also report when HPET IRQs are involved

This still leaves various holes in the HPET glue, like the emulated update
IRQs being out of sync with the RTC, alarms never using day or month
matches, and many extra IRQs (at 64 Hz).

[akpm@linux-foundation.org: fix build]
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Cc: Tomas Janousek <tomi@nomi.cz>
Cc: Bernhard Walle <bwalle@suse.de>
Cc: Carlos R. Mafra <crmafra@ift.unesp.br>
Acked-by: NAlessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When CONFIG_HPET_EMULATE_RTC is defined the external declaration of
hpet_rtc_interrupt is redundant due to the inclusion of hpet.h.

When !CONFIG_HPET_EMULATE_RTC we make it clear that hpet_rtc_interrupt is
not used by defining it to return zero.
Signed-off-by: NCarlos R. Mafra <crmafra@ift.unesp.br>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>