CS_ETM_TRACE_ON packet itself can give the info that there have a
discontinuity in the trace, this patch is to add branch sample for
CS_ETM_TRACE_ON packet if it is inserted in the middle of CS_ETM_RANGE
packets; as result we can have hint for the trace discontinuity.
Signed-off-by: NLeo Yan <leo.yan@linaro.org>
Reviewed-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1531295145-596-7-git-send-email-leo.yan@linaro.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

If one CS_ETM_TRACE_ON packet is inserted, we miss to generate branch
sample for the previous CS_ETM_RANGE packet.

This patch is to generate branch sample when receiving a CS_ETM_TRACE_ON
packet, so this can save complete info for the previous CS_ETM_RANGE
packet just before CS_ETM_TRACE_ON packet.
Signed-off-by: NLeo Yan <leo.yan@linaro.org>
Reviewed-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1531295145-596-6-git-send-email-leo.yan@linaro.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

For CS_ETM_TRACE_ON packet, its fields 'packet->start_addr' and
'packet->end_addr' equal to 0xdeadbeefdeadbeefUL which are emitted in
the decoder layer as dummy value, but the dummy value is pointless for
branch sample when we use 'perf script' command to check program flow.

This patch is a preparation to support CS_ETM_TRACE_ON packet for branch
sample, it converts the dummy address value to zero for more readable;
this is accomplished by cs_etm__last_executed_instr() and
cs_etm__first_executed_instr().  The later one is a new function
introduced by this patch.
Signed-off-by: NLeo Yan <leo.yan@linaro.org>
Reviewed-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1531295145-596-5-git-send-email-leo.yan@linaro.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Usually the start tracing packet is a CS_ETM_TRACE_ON packet, this
packet is passed to cs_etm__flush();  cs_etm__flush() will check the
condition 'prev_packet->sample_type == CS_ETM_RANGE' but 'prev_packet'
is allocated by zalloc() so 'prev_packet->sample_type' is zero in
initialization and this condition is false.  So cs_etm__flush() will
directly bail out without handling the start tracing packet.

This patch is to introduce a new sample type CS_ETM_EMPTY, which is used
to indicate the packet is an empty packet.  cs_etm__flush() will swap
packets when it finds the previous packet is empty, so this can record
the start tracing packet into 'etmq->prev_packet'.
Signed-off-by: NLeo Yan <leo.yan@linaro.org>
Reviewed-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1531295145-596-4-git-send-email-leo.yan@linaro.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The perf tool build and install is controlled via a Makefile. The
'install' rule creates directories and copies files. Among them are
header files installed in /usr/lib/include/perf/bpf/.

However all listed examples are installing its header files in

  /usr/lib/<tool-name>/...[/include]/header.h

and not in

  /usr/lib/include/<tool-name>/.../header.h.

Background information:

Building the Fedora 28 glibc RPM on s390x and s390 fails on s390 (gcc
-m31) as gcc is not able to find header-files like stdbool.h.

In the glibc.spec file, you can see that glibc is configured with
"--with-headers". In this case, first -nostdinc is added to the CFLAGS
and then further include paths are added via -isystem.  One of those
paths should contain header files like stdbool.h.

In order to get this path, gcc is invoked with:

- on Fedora 28 (with 4.18 kernel):

  $ gcc -print-file-name=include
  /usr/lib/gcc/s390x-redhat-linux/8/include
  $ gcc -m31 -print-file-name=include
  /usr/lib/gcc/s390x-redhat-linux/8/../../../../lib/include
  => If perf is installed, this is: /usr/lib/include
  On my machine this directory is only containing the directory "perf".
  If perf is not installed gcc returns: /usr/lib/gcc/s390x-redhat-linux/8/include

- on Ubuntu 18.04 (with 4.15 kernel):

  $ gcc  -print-file-name=include
  /usr/lib/gcc/s390x-linux-gnu/7/include
  $ gcc -m31 -print-file-name=include
  /usr/lib/gcc/s390x-linux-gnu/7/include
  => gcc returns the correct path even if perf is installed.

In each case, the introduction of the subdirectory /usr/lib/include
leads to the regression that one can not build the glibc RPM for s390
anymore as gcc can not find headers like stdbool.h.

To remedy this install bpf.h to /usr/lib/perf/include/bpf/bpf.h

Output before using the command 'perf test -Fv 40':

  echo '...[bpf-program-source]...' | /usr/bin/clang ... \
		   -I/root/lib/include/perf/bpf ...
                               ^^^^^^^^^^^^
...
  [root@p23lp27 perf]# perf test -F 40
  40: BPF filter                                            :
  40.1: Basic BPF filtering                                 : Ok
  40.2: BPF pinning                                         : Ok
  40.3: BPF prologue generation                             : Ok
  40.4: BPF relocation checker                              : Ok
  [root@p23lp27 perf]#

Output after using command 'perf test -Fv 40':

  echo '...[bpf-program-source]...' | /usr/bin/clang ... \
		 -I/root/lib/perf/include/bpf ...
                             ^^^^^^^^^^^^
...
  [root@p23lp27 perf]# perf test -F 40
  40: BPF filter                                            :
  40.1: Basic BPF filtering                                 : Ok
  40.2: BPF pinning                                         : Ok
  40.3: BPF prologue generation                             : Ok
  40.4: BPF relocation checker                              : Ok
  [root@p23lp27 perf]#

Committer testing:

While the above 'perf test -F 40' (or 'perf test bpf') will allow us
to see that the correct path is now added via -I, to actually test this
we better try to use a bpf script that includes files in the changed
directory.

We have the files that now reside in /root/lib/perf/examples/bpf/ to do
just that:

  # tail -8 /root/lib/perf/examples/bpf/5sec.c
  #include <bpf.h>

  int probe(hrtimer_nanosleep, rqtp->tv_sec)(void *ctx, int err, long sec)
  {
	  return sec == 5;
  }

  license(GPL);
  # perf trace -e *sleep -e /root/lib/perf/examples/bpf/5sec.c sleep 4
       0.333 (4000.086 ms): sleep/9248 nanosleep(rqtp: 0x7ffc155f3300) = 0
  # perf trace -e *sleep -e /root/lib/perf/examples/bpf/5sec.c sleep 5
       0.287 (         ): sleep/9659 nanosleep(rqtp: 0x7ffeafe38200) ...
       0.290 (         ): perf_bpf_probe:hrtimer_nanosleep:(ffffffff9911efe0) tv_sec=5
       0.287 (5000.059 ms): sleep/9659  ... [continued]: nanosleep()) = 0
  # perf trace -e *sleep -e /root/lib/perf/examples/bpf/5sec.c sleep 6
       0.247 (5999.951 ms): sleep/10068 nanosleep(rqtp: 0x7fff2086d900) = 0
  # perf trace -e *sleep -e /root/lib/perf/examples/bpf/5sec.c sleep 5.987
       0.293 (         ): sleep/10489 nanosleep(rqtp: 0x7ffdd4fc10e0) ...
       0.296 (         ): perf_bpf_probe:hrtimer_nanosleep:(ffffffff9911efe0) tv_sec=5
       0.293 (5986.912 ms): sleep/10489  ... [continued]: nanosleep()) = 0
  #
Suggested-by: NStefan Liebler <stli@linux.ibm.com>
Suggested-by: NArnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: NThomas Richter <tmricht@linux.ibm.com>
Reviewed-by: NHendrik Brueckner <brueckner@linux.ibm.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Fixes: 1b16fffa ("perf llvm-utils: Add bpf include path to clang command line")
Link: http://lkml.kernel.org/r/20180731073254.91090-1-tmricht@linux.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

'perf c2c' scans read/write accesses and tries to find false sharing
cases, so when the events it wants were not asked for or ended up not
taking place, we get no histograms.

So do not try to display entry details if there's not any. Currently
this ends up in crash:

  $ perf c2c report # then press 'd'
  perf: Segmentation fault
  $

Committer testing:

Before:

Record a perf.data file without events of interest to 'perf c2c report',
then call it and press 'd':

  # perf record sleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.001 MB perf.data (6 samples) ]
  # perf c2c report
  perf: Segmentation fault
  -------- backtrace --------
  perf[0x5b1d2a]
  /lib64/libc.so.6(+0x346df)[0x7fcb566e36df]
  perf[0x46fcae]
  perf[0x4a9f1e]
  perf[0x4aa220]
  perf(main+0x301)[0x42c561]
  /lib64/libc.so.6(__libc_start_main+0xe9)[0x7fcb566cff29]
  perf(_start+0x29)[0x42c999]
  #

After the patch the segfault doesn't take place, a follow up patch to
tell the user why nothing changes when 'd' is pressed would be good.

Reported-by: rodia@autistici.org
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: f1c5fd4d ("perf c2c report: Add TUI cacheline browser")
Link: http://lkml.kernel.org/r/20180724062008.26126-1-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Recently, the subtest numbering was changed to start from 1.  While it
is fine for displaying results, this should not be the case when the
subtests are actually invoked.

Typically, the subtests are stored in zero-indexed arrays and invoked
based on the index passed to the main test function.  Since the index
now starts from 1, the second subtest in the array (index 1) gets
invoked instead of the first (index 0).  This applies to all of the
following subtests but for the last one, the subtest always fails
because it does not meet the boundary condition of the subtest index
being lesser than the number of subtests.

This can be observed on powerpc64 and x86_64 systems running Fedora 28
as shown below.

Before:

  # perf test "builtin clang support"
  55: builtin clang support                                 :
  55.1: builtin clang compile C source to IR                : Ok
  55.2: builtin clang compile C source to ELF object        : FAILED!

  # perf test "LLVM search and compile"
  38: LLVM search and compile                               :
  38.1: Basic BPF llvm compile                              : Ok
  38.2: kbuild searching                                    : Ok
  38.3: Compile source for BPF prologue generation          : Ok
  38.4: Compile source for BPF relocation                   : FAILED!

  # perf test "BPF filter"
  40: BPF filter                                            :
  40.1: Basic BPF filtering                                 : Ok
  40.2: BPF pinning                                         : Ok
  40.3: BPF prologue generation                             : Ok
  40.4: BPF relocation checker                              : FAILED!

After:

  # perf test "builtin clang support"
  55: builtin clang support                                 :
  55.1: builtin clang compile C source to IR                : Ok
  55.2: builtin clang compile C source to ELF object        : Ok

  # perf test "LLVM search and compile"
  38: LLVM search and compile                               :
  38.1: Basic BPF llvm compile                              : Ok
  38.2: kbuild searching                                    : Ok
  38.3: Compile source for BPF prologue generation          : Ok
  38.4: Compile source for BPF relocation                   : Ok

  # perf test "BPF filter"
  40: BPF filter                                            :
  40.1: Basic BPF filtering                                 : Ok
  40.2: BPF pinning                                         : Ok
  40.3: BPF prologue generation                             : Ok
  40.4: BPF relocation checker                              : Ok
Signed-off-by: NSandipan Das <sandipan@linux.ibm.com>
Reported-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Fixes: 9ef01124 ("perf test: Fix subtest number when showing results")
Link: http://lkml.kernel.org/r/20180726171733.33208-1-sandipan@linux.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

For instance:

  $ trace -e socket* ssh sandy
     0.000 ( 0.031 ms): ssh/19919 socket(family: LOCAL, type: STREAM|CLOEXEC|NONBLOCK                   ) = 3
     0.052 ( 0.015 ms): ssh/19919 socket(family: LOCAL, type: STREAM|CLOEXEC|NONBLOCK                   ) = 3
     1.568 ( 0.020 ms): ssh/19919 socket(family: LOCAL, type: STREAM|CLOEXEC|NONBLOCK                   ) = 3
     1.603 ( 0.012 ms): ssh/19919 socket(family: LOCAL, type: STREAM|CLOEXEC|NONBLOCK                   ) = 3
     1.699 ( 0.014 ms): ssh/19919 socket(family: LOCAL, type: STREAM|CLOEXEC|NONBLOCK                   ) = 3
     1.724 ( 0.012 ms): ssh/19919 socket(family: LOCAL, type: STREAM|CLOEXEC|NONBLOCK                   ) = 3
     1.804 ( 0.020 ms): ssh/19919 socket(family: INET, type: STREAM, protocol: TCP                      ) = 3
    17.549 ( 0.098 ms): ssh/19919 socket(family: LOCAL, type: STREAM                                    ) = 4
  acme@sandy's password:

Just like with other syscall args, the common bits are supressed so that
the output is more compact, i.e. we use "TCP" instead of "IPPROTO_TCP",
but we can make this show the original constant names if we like it by
using some command line knob or ~/.perfconfig "[trace]" section
variable.

Also needed is to make perf's event parser accept things like:

  $ perf trace -e socket*/protocol=TCP/

By using both the tracefs event 'format' files and these tables built
from the kernel sources.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-l39jz1vnyda0b6jsufuc8bz7@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

It'll be wired to 'perf trace' in the next cset.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-2i9vkvm1ik8yu4hgjmxhsyjv@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We may have string tables where not all slots have values, in those
cases its better to print the numeric value, for instance:

In the table below we would show "protocol: (null)" for

      socket_ipproto[3]

Where it would be better to show "protocol: 3".

      $ tools/perf/trace/beauty/socket_ipproto.sh
      static const char *socket_ipproto[] = {
            [0] = "IP",
            [103] = "PIM",
            [108] = "COMP",
            [12] = "PUP",
            [132] = "SCTP",
            [136] = "UDPLITE",
            [137] = "MPLS",
            [17] = "UDP",
            [1] = "ICMP",
            [22] = "IDP",
            [255] = "RAW",
            [29] = "TP",
            [2] = "IGMP",
            [33] = "DCCP",
            [41] = "IPV6",
            [46] = "RSVP",
            [47] = "GRE",
            [4] = "IPIP",
            [50] = "ESP",
            [51] = "AH",
            [6] = "TCP",
            [8] = "EGP",
            [92] = "MTP",
            [94] = "BEETPH",
            [98] = "ENCAP",
      };
      $

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-7djfak94eb3b9ltr79cpn3ti@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

It'll use tools/include copy of linux/in.h to generate a table to be
used by tools, initially by the 'socket' and 'socketpair' beautifiers in
'perf trace', but that could also be used to translate from a string
constant to the integer value to be used in a eBPF or tracefs tracepoint
filter.

When used without any args it produces:

  $ tools/perf/trace/beauty/socket_ipproto.sh
  static const char *socket_ipproto[] = {
	[0] = "IP",
	[103] = "PIM",
	[108] = "COMP",
	[12] = "PUP",
	[132] = "SCTP",
	[136] = "UDPLITE",
	[137] = "MPLS",
	[17] = "UDP",
	[1] = "ICMP",
	[22] = "IDP",
	[255] = "RAW",
	[29] = "TP",
	[2] = "IGMP",
	[33] = "DCCP",
	[41] = "IPV6",
	[46] = "RSVP",
	[47] = "GRE",
	[4] = "IPIP",
	[50] = "ESP",
	[51] = "AH",
	[6] = "TCP",
	[8] = "EGP",
	[92] = "MTP",
	[94] = "BEETPH",
	[98] = "ENCAP",
  };
  $

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-v9rafqh3qn6b9kp9vfvj9f8s@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We'll use it to create tables for the 'protocol' argument to the
socket syscall when the 'family' arg is one of AF_INET or AF_INET6.

Add it to check_headers.sh so that when a new protocol gets added we get
a notification during the build process.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-2amnveu1ns4emjn70xuavpje@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The 'umask' event parameter is unsupported on some architectures like
powerpc64.

This can be observed on a powerpc64le system running Fedora 27 as shown
below.

  # perf test "Parse event definition strings" -v
   6: Parse event definition strings                        :
  --- start ---
  test child forked, pid 45915
  ...
  running test 3 'cpu/name='COMPLEX_CYCLES_NAME:orig=cycles,desc=chip-clock-ticks',period=0x1,event=0x2,umask=0x3/ukp'Invalid event/parameter 'umask'
  Invalid event/parameter 'umask'
  failed to parse event 'cpu/name='COMPLEX_CYCLES_NAME:orig=cycles,desc=chip-clock-ticks',period=0x1,event=0x2,umask=0x3/ukp', err 1, str 'unknown term'
  event syntax error: '..,event=0x2,umask=0x3/ukp'
                                    \___ unknown term

  valid terms: event,mark,pmc,cache_sel,pmcxsel,unit,thresh_stop,thresh_start,combine,thresh_sel,thresh_cmp,sample_mode,config,config1,config2,name,period,freq,branch_type,time,call-graph,stack-size,no-inherit,inherit,max-stack,no-overwrite,overwrite,driver-config

  mem_access -> cpu/event=0x10401e0/
  running test 0 'config=10,config1,config2=3,umask=1'
  test child finished with 1
  ---- end ----
  Parse event definition strings: FAILED!

Committer testing:

After applying the patch these test passes and in verbose mode we get:

  # perf test -v "event definition"
   6: Parse event definition strings:
  --- start ---
  test child forked, pid 11061
  running test 0 'syscalls:sys_enter_openat'Using CPUID GenuineIntel-6-9E
  <SNIP>
  running test 53 'cycles/name='COMPLEX_CYCLES_NAME:orig=cycles,desc=chip-clock-ticks'/Duk'
  running test 0 'cpu/config=10,config1,config2=3,period=1000/u'
  running test 1 'cpu/config=1,name=krava/u,cpu/config=2/u'
  running test 2 'cpu/config=1,call-graph=fp,time,period=100000/,cpu/config=2,call-graph=no,time=0,period=2000/'
  running test 3 'cpu/name='COMPLEX_CYCLES_NAME:orig=cycles,desc=chip-clock-ticks',period=0x1,event=0x2/ukp'
  <SNIP>
  test child finished with 0
  ---- end ----
  Parse event definition strings: Ok
  #
Suggested-by: NRavi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: NSandipan Das <sandipan@linux.ibm.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Fixes: 06dc5bf2 ("perf tests: Check that complex event name is parsed correctly")
Link: http://lkml.kernel.org/r/20180726105502.31670-1-sandipan@linux.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

'perf record' will error out if both --delay and LBR are applied.

For example:

  # perf record -D 1000 -a -e cycles -j any -- sleep 2
  Error:
  dummy:HG: PMU Hardware doesn't support sampling/overflow-interrupts.
  Try 'perf stat'
  #

A dummy event is added implicitly for initial delay, which has the same
configurations as real sampling events. The dummy event is a software
event. If LBR is configured, perf must error out.

The dummy event will only be used to track PERF_RECORD_MMAP while perf
waits for the initial delay to enable the real events. The BRANCH_STACK
bit can be safely cleared for the dummy event.

After applying the patch:

  # perf record -D 1000 -a -e cycles -j any -- sleep 2
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 1.054 MB perf.data (828 samples) ]
  #
Reported-by: NSunil K Pandey <sunil.k.pandey@intel.com>
Signed-off-by: NKan Liang <kan.liang@linux.intel.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1531145722-16404-1-git-send-email-kan.liang@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Useful when checking the effects of header synchs for the files it uses
as a input to generate string tables, in retrospect this is how it
should've been done from day 1, not requiring the header_dir to be set
on the Makefile, will change everything later, so that the only parm,
common to all generators will be $(srctree) and $(beauty_outdir).

So, to see what it generates, just call it without any parameters:

  $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh
  static const char *vhost_virtio_ioctl_cmds[] = {
	[0x00] = "SET_FEATURES",
	[0x01] = "SET_OWNER",
	[0x02] = "RESET_OWNER",
	[0x03] = "SET_MEM_TABLE",
	[0x04] = "SET_LOG_BASE",
	[0x07] = "SET_LOG_FD",
	[0x10] = "SET_VRING_NUM",
	[0x11] = "SET_VRING_ADDR",
	[0x12] = "SET_VRING_BASE",
	[0x13] = "SET_VRING_ENDIAN",
	[0x14] = "GET_VRING_ENDIAN",
	[0x20] = "SET_VRING_KICK",
	[0x21] = "SET_VRING_CALL",
	[0x22] = "SET_VRING_ERR",
	[0x23] = "SET_VRING_BUSYLOOP_TIMEOUT",
	[0x24] = "GET_VRING_BUSYLOOP_TIMEOUT",
	[0x30] = "NET_SET_BACKEND",
	[0x40] = "SCSI_SET_ENDPOINT",
	[0x41] = "SCSI_CLEAR_ENDPOINT",
	[0x42] = "SCSI_GET_ABI_VERSION",
	[0x43] = "SCSI_SET_EVENTS_MISSED",
	[0x44] = "SCSI_GET_EVENTS_MISSED",
	[0x60] = "VSOCK_SET_GUEST_CID",
	[0x61] = "VSOCK_SET_RUNNING",
  };
  static const char *vhost_virtio_ioctl_read_cmds[] = {
	[0x00] = "GET_FEATURES",
	[0x12] = "GET_VRING_BASE",
  };
  $

Or:

  $ tools/perf/trace/beauty/sndrv_pcm_ioctl.sh
  static const char *sndrv_pcm_ioctl_cmds[] = {
	[0x00] = "PVERSION",
	[0x01] = "INFO",
	[0x02] = "TSTAMP",
	[0x03] = "TTSTAMP",
	[0x04] = "USER_PVERSION",
	[0x10] = "HW_REFINE",
	[0x11] = "HW_PARAMS",
	[0x12] = "HW_FREE",
	[0x13] = "SW_PARAMS",
	[0x20] = "STATUS",
	[0x21] = "DELAY",
	[0x22] = "HWSYNC",
	[0x23] = "SYNC_PTR",
	[0x24] = "STATUS_EXT",
	[0x32] = "CHANNEL_INFO",
	[0x40] = "PREPARE",
	[0x41] = "RESET",
	[0x42] = "START",
	[0x43] = "DROP",
	[0x44] = "DRAIN",
	[0x45] = "PAUSE",
	[0x46] = "REWIND",
	[0x47] = "RESUME",
	[0x48] = "XRUN",
	[0x49] = "FORWARD",
	[0x50] = "WRITEI_FRAMES",
	[0x51] = "READI_FRAMES",
	[0x52] = "WRITEN_FRAMES",
	[0x53] = "READN_FRAMES",
	[0x60] = "LINK",
	[0x61] = "UNLINK",
  };
  $

Etc.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-90am4vm8hh1osms894dp2otr@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

To pick up fixes.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'perf-urgent-for-mingo-4.18-20180730' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/urgent fixes from Arnaldo Carvalho de Melo:

- Update the tools copy of several files, including perf_event.h,
  powerpc's asm/unistd.h (new io_pgetevents syscall), bpf.h and
  x86's memcpy_64.s (used in 'perf bench mem'), silencing the
  respective warnings during the perf tools build.

- Fix the build on the alpine:edge distro.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Masayoshi Mizuma reported that a warning message is shown while a CPU is
hot-removed on Broadwell servers:

  WARNING: CPU: 126 PID: 6 at arch/x86/events/intel/uncore.c:988
  uncore_pci_remove+0x10b/0x150
  Call Trace:
   pci_device_remove+0x42/0xd0
   device_release_driver_internal+0x148/0x220
   pci_stop_bus_device+0x76/0xa0
   pci_stop_root_bus+0x44/0x60
   acpi_pci_root_remove+0x1f/0x80
   acpi_bus_trim+0x57/0x90
   acpi_bus_trim+0x2e/0x90
   acpi_device_hotplug+0x2bc/0x4b0
   acpi_hotplug_work_fn+0x1a/0x30
   process_one_work+0x174/0x3a0
   worker_thread+0x4c/0x3d0
   kthread+0xf8/0x130

This bug was introduced by:

  commit 15a3e845 ("perf/x86/intel/uncore: Fix SBOX support for Broadwell CPUs")

The index of "QPI Port 2 filter" was hardcode to 2, but this conflicts with the
index of "PCU.3" which is "HSWEP_PCI_PCU_3", which equals to 2 as well.

To fix the conflict, the hardcoded index needs to be cleaned up:

 - introduce a new enumerator "BDX_PCI_QPI_PORT2_FILTER" for "QPI Port 2
   filter" on Broadwell,
 - increase UNCORE_EXTRA_PCI_DEV_MAX by one,
 - clean up the hardcoded index.
Debugged-by: NMasayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Suggested-by: NIngo Molnar <mingo@kernel.org>
Reported-by: NMasayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Tested-by: NMasayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: NKan Liang <kan.liang@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: msys.mizuma@gmail.com
Cc: stable@vger.kernel.org
Fixes: 15a3e845 ("perf/x86/intel/uncore: Fix SBOX support for Broadwell CPUs")
Link: http://lkml.kernel.org/r/1532953688-15008-1-git-send-email-kan.liang@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Pull x86 fixes from Ingo Molnar:
 "Misc fixes:

   - a build race fix

   - a Xen entry fix

   - a TSC_DEADLINE quirk future-proofing fix"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/boot: Fix if_changed build flip/flop bug
  x86/entry/64: Remove %ebx handling from error_entry/exit
  x86/apic: Future-proof the TSC_DEADLINE quirk for SKX

Pull scheduler fixes from Ingo Molnar:
 "Misc fixes:

   - a deadline scheduler related bug fix which triggered a kernel
     warning

   - an RT_RUNTIME_SHARE fix

   - a stop_machine preemption fix

   - a potential NULL dereference fix in sched_domain_debug_one()"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/rt: Restore rt_runtime after disabling RT_RUNTIME_SHARE
  sched/deadline: Update rq_clock of later_rq when pushing a task
  stop_machine: Disable preemption after queueing stopper threads
  sched/topology: Check variable group before dereferencing it

Pull perf fixes from Ingo Molnar:
 "Misc fixes:

   - AMD IBS data corruptor fix (uncovered by UBSAN)

   - an Intel PEBS entry unwind error fix

   - a HW-tracing crash fix

   - a MAINTAINERS update"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Fix crash when using HW tracing kernel filters
  perf/x86/intel: Fix unwind errors from PEBS entries (mk-II)
  MAINTAINERS: Add Naveen N. Rao as kprobes co-maintainer
  perf/x86/amd/ibs: Don't access non-started event

Pull locking fixes from Ingo Molnar:
 "A paravirt UP-patching fix, and an I2C MUX driver lockdep warning fix"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/pvqspinlock/x86: Use LOCK_PREFIX in __pv_queued_spin_unlock() assembly code
  i2c/mux, locking/core: Annotate the nested rt_mutex usage
  locking/rtmutex: Allow specifying a subclass for nested locking

Pull EFI fix from Ingo Molnar:
 "An UEFI variables fix for SEV guests"

* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/efi: Access EFI MMIO data as unencrypted when SEV is active

The UAPI file byteorder/little_endian.h uses the __always_inline define
without including the header where it is defined, linux/stddef.h, this
ends up working in all the other distros because that file gets included
seemingly by luck from one of the files included from little_endian.h.

But not on Alpine:edge, that fails for all files where perf_event.h is
included but linux/stddef.h isn't include before that.

Adding the missing linux/stddef.h file where it breaks on Alpine:edge to
fix that, in all other distros, that is just a very small header anyway.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-9r1pifftxvuxms8l7ir73p5l@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

To cope with the changes in:

  12c89130 ("x86/asm/memcpy_mcsafe: Add write-protection-fault handling")
  60622d68 ("x86/asm/memcpy_mcsafe: Return bytes remaining")
  bd131544 ("x86/asm/memcpy_mcsafe: Add labels for __memcpy_mcsafe() write fault handling")
  da7bc9c5 ("x86/asm/memcpy_mcsafe: Remove loop unrolling")

This needed introducing a file with a copy of the mcsafe_handle_tail()
function, that is used in the new memcpy_64.S file, as well as a dummy
mcsafe_test.h header.

Testing it:

  $ nm ~/bin/perf | grep mcsafe
  0000000000484130 T mcsafe_handle_tail
  0000000000484300 T __memcpy_mcsafe
  $
  $ perf bench mem memcpy
  # Running 'mem/memcpy' benchmark:
  # function 'default' (Default memcpy() provided by glibc)
  # Copying 1MB bytes ...

      44.389205 GB/sec
  # function 'x86-64-unrolled' (unrolled memcpy() in arch/x86/lib/memcpy_64.S)
  # Copying 1MB bytes ...

      22.710756 GB/sec
  # function 'x86-64-movsq' (movsq-based memcpy() in arch/x86/lib/memcpy_64.S)
  # Copying 1MB bytes ...

      42.459239 GB/sec
  # function 'x86-64-movsb' (movsb-based memcpy() in arch/x86/lib/memcpy_64.S)
  # Copying 1MB bytes ...

      42.459239 GB/sec
  $

This silences this perf tools build warning:

  Warning: Kernel ABI header at 'tools/arch/x86/lib/memcpy_64.S' differs from latest version at 'arch/x86/lib/memcpy_64.S'

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mika Penttilä <mika.penttila@nextfour.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-igdpciheradk3gb3qqal52d0@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

To get the changes in:

  4c79579b ("bpf: Change bpf_fib_lookup to return lookup status")

That do not entail changes in tools/perf/ use of it, elliminating the
following perf build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/linux/bpf.h' differs from latest version at 'include/uapi/linux/bpf.h'

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-yei494y6b3mn6bjzz9g0ws12@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The new 'io_pgetevents' syscall was wired up in PowerPC in the following
cset:

  b2f82565 ("powerpc: Wire up io_pgetevents")

Update tools/arch/powerpc/ copy of the asm/unistd.h file so that 'perf
trace' on PowerPC gets it in its syscall table.

This elliminated the following perf build warning:

  Warning: Kernel ABI header at 'tools/arch/powerpc/include/uapi/asm/unistd.h' differs from latest version at 'arch/powerpc/include/uapi/asm/unistd.h'

Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Breno Leitao <leitao@debian.org>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: https://lkml.kernel.org/n/tip-9uvu7tz4ud3bxxfyxwryuz47@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

To get the changes in:

  6cbc304f ("perf/x86/intel: Fix unwind errors from PEBS entries (mk-II)")

That do not imply any changes in the tooling side, the (ab)use of
sample_type is entirely done in kernel space, nothing for userspace to
witness here.

This cures the following warning during perf's build:

  Warning: Kernel ABI header at 'tools/include/uapi/linux/perf_event.h' differs from latest version at 'include/uapi/linux/perf_event.h'

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-o64mjoy35s9gd1gitunw1zg4@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Pull ext4 fixes from Ted Ts'o:
 "Some miscellaneous ext4 fixes for 4.18; one fix is for a regression
  introduced in 4.18-rc4.

  Sorry for the late-breaking pull. I was originally going to wait for
  the next merge window, but Eric Whitney found a regression introduced
  in 4.18-rc4, so I decided to push out the regression plus the other
  fixes now. (The other commits have been baking in linux-next since
  early July)"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix check to prevent initializing reserved inodes
  ext4: check for allocation block validity with block group locked
  ext4: fix inline data updates with checksums enabled
  ext4: clear mmp sequence number when remounting read-only
  ext4: fix false negatives *and* false positives in ext4_check_descriptors()

Anatoly Trosinenko reports that a corrupted squashfs image can cause a
kernel oops.  It turns out that squashfs can end up being confused about
negative fragment lengths.

The regular squashfs_read_data() does check for negative lengths, but
squashfs_read_metadata() did not, and the fragment size code just
blindly trusted the on-disk value.  Fix both the fragment parsing and
the metadata reading code.
Reported-by: NAnatoly Trosinenko <anatoly.trosinenko@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Phillip Lougher <phillip@squashfs.org.uk>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 8844618d: "ext4: only look at the bg_flags field if it is
valid" will complain if block group zero does not have the
EXT4_BG_INODE_ZEROED flag set.  Unfortunately, this is not correct,
since a freshly created file system has this flag cleared.  It gets
almost immediately after the file system is mounted read-write --- but
the following somewhat unlikely sequence will end up triggering a
false positive report of a corrupted file system:

   mkfs.ext4 /dev/vdc
   mount -o ro /dev/vdc /vdc
   mount -o remount,rw /dev/vdc

Instead, when initializing the inode table for block group zero, test
to make sure that itable_unused count is not too large, since that is
the case that will result in some or all of the reserved inodes
getting cleared.

This fixes the failures reported by Eric Whiteney when running
generic/230 and generic/231 in the the nojournal test case.

Fixes: 8844618d ("ext4: only look at the bg_flags field if it is valid")
Reported-by: NEric Whitney <enwlinux@gmail.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Pull random fixes from Ted Ts'o:
 "In reaction to the fixes to address CVE-2018-1108, some Linux
  distributions that have certain systemd versions in some cases
  combined with patches to libcrypt for FIPS/FEDRAMP compliance, have
  led to boot-time stalls for some hardware.

  The reaction by some distros and Linux sysadmins has been to install
  packages that try to do complicated things with the CPU and hope that
  leads to randomness.

  To mitigate this, if RDRAND is available, mix it into entropy provided
  by userspace. It won't hurt, and it will probably help"

* tag 'random_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
  random: mix rdrand with entropy sent in from userspace

Pull GPIO fixes from Linus Walleij:
 "Just a smallish OF fix and a driver fix:

   - OF flag fix for special regulator flags

   - fix up the Uniphier IRQ callback"

* tag 'gpio-v4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: uniphier: set legitimate irq trigger type in .to_irq hook
  gpio: of: Handle fixed regulator flags properly

Pull MIPS fix from Paul Burton:
 "Here's one more MIPS fix, reverting an errata workaround that was
  merged for v4.18-rc2 but has since been found to cause system hangs on
  some BCM4718A1-based systems by the OpenWRT project"

* tag 'mips_fixes_4.18_5' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  Revert "MIPS: BCM47XX: Enable 74K Core ExternalSync for PCIe erratum"

Pull i2c fixes from Wolfram Sang:
 "Some driver bugfixes"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: imx: use open drain for recovery GPIO
  i2c: rcar: handle RXDMA HW behaviour on Gen3
  i2c: imx: Fix reinit_completion() use
  i2c: davinci: Avoid zero value of CLKH

Pull block fixes from Jens Axboe:
 "Bigger than usual at this time, mostly due to the O_DIRECT corruption
  issue and the fact that I was on vacation last week. This contains:

   - NVMe pull request with two fixes for the FC code, and two target
     fixes (Christoph)

   - a DIF bio reset iteration fix (Greg Edwards)

   - two nbd reply and requeue fixes (Josef)

   - SCSI timeout fixup (Keith)

   - a small series that fixes an issue with bio_iov_iter_get_pages(),
     which ended up causing corruption for larger sized O_DIRECT writes
     that ended up racing with buffered writes (Martin Wilck)"

* tag 'for-linus-20180727' of git://git.kernel.dk/linux-block:
  block: reset bi_iter.bi_done after splitting bio
  block: bio_iov_iter_get_pages: pin more pages for multi-segment IOs
  blkdev: __blkdev_direct_IO_simple: fix leak in error case
  block: bio_iov_iter_get_pages: fix size of last iovec
  nvmet: only check for filebacking on -ENOTBLK
  nvmet: fixup crash on NULL device path
  scsi: set timed out out mq requests to complete
  blk-mq: export setting request completion state
  nvme: if_ready checks to fail io to deleting controller
  nvmet-fc: fix target sgl list on large transfers
  nbd: handle unexpected replies better
  nbd: don't requeue the same request twice.

Merge misc fixes from Andrew Morton:
 "11 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  kvm, mm: account shadow page tables to kmemcg
  zswap: re-check zswap_is_full() after do zswap_shrink()
  include/linux/eventfd.h: include linux/errno.h
  mm: fix vma_is_anonymous() false-positives
  mm: use vma_init() to initialize VMAs on stack and data segments
  mm: introduce vma_init()
  mm: fix exports that inadvertently make put_page() EXPORT_SYMBOL_GPL
  ipc/sem.c: prevent queue.status tearing in semop
  mm: disallow mappings that conflict for devm_memremap_pages()
  kasan: only select SLUB_DEBUG with SYSFS=y
  delayacct: fix crash in delayacct_blkio_end() after delayacct init failure

Pull PCI fix from Bjorn Helgaas:
 "Fix a use-after-free error in fatal error recovery (Thomas Tai)"

* tag 'pci-v4.18-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI/AER: Work around use-after-free in pcie_do_fatal_recovery()

Pull arm64 fixes from Will Deacon:
 "Inevitably, after saying that I hoped we would be done on the fixes
  front, a couple of issues have cropped up over the last week. Next
  time I'll stay schtum.

  We've fixed an over-eager BUILD_BUG_ON() which Arnd ran into with
  arndconfig, as well as ensuring that KPTI really is disabled on
  Thunder-X1, where the cure is worse than the disease (this regressed
  when we reworked the heterogeneous CPU feature checking).

  Summary:

   - Fix disabling of kpti on Thunder-X machines

   - Fix premature BUILD_BUG_ON() found with randconfig"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: fix vmemmap BUILD_BUG_ON() triggering on !vmemmap setups
  arm64: Check for errata before evaluating cpu features