- 08 11月, 2014 1 次提交
-
-
由 Bo Shen 提交于
Prepare SSC clock only when request SSC channel, the clock will be enabled when initialize the SSC. Signed-off-by: NBo Shen <voice.shen@atmel.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 04 11月, 2014 4 次提交
-
-
由 Alexander Usyskin 提交于
We have host client in connect/disconnect response processors, so use client print functions to simplify and unify code. Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tomas Winkler 提交于
<debugfs>meiX/meclients: display also fixed/connectionless clients Use better name for fixed client field: fixed_address is boolean and indicates whether a client is fixed or dynamic. Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tomas Winkler 提交于
Use local cl variable instead of dev->iamthif_cl and dev->wd_cl as the first step to use dynamic allocation of these clients as their are not supported on all platforms Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alexander Usyskin 提交于
The pointer to client in the callback structure (cb->cl) can't be NULL with current locking. We can drop check and warnings as in some cases this just uselessly complicates the code flow. Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 28 10月, 2014 3 次提交
-
-
由 Ian Munsie 提交于
In certain circumstances the PSL (Power Service Layer, which provides translation services for CXL hardware) can send an interrupt for a segment miss that the kernel has already handled. This can happen if multiple translations for the same segment are queued in the PSL before the kernel has restarted the first translation. The CXL driver does not expect this situation and does not check if a segment had already been handled. This could cause a duplicate segment table entry which in turn caused a PSL error taking down the card. This patch fixes the issue by checking for existing entries in the segment table that match the segment we are trying to insert, so as to avoid inserting duplicate entries. Signed-off-by: NIan Munsie <imunsie@au1.ibm.com> Reviewed-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Ian Munsie 提交于
This moves the segment table hash calculation from cxl_load_segment() into find_free_sste() since that is the only place it is actually used. Signed-off-by: NIan Munsie <imunsie@au1.ibm.com> Reviewed-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Ian Munsie 提交于
This patch simplifies the process of finding a free segment table entry by disabling the secondary hash. This reduces the number of possible entries in the segment table for a given address from 16 to 8. Due to the large segment sizes we use it is extremely unlikely that the secondary hash would ever have been used in practice, so this should not have any negative impacts and may even improve performance due to the reduced number of comparisons that software & hardware need to perform. This patch clears the SC bit in the hardware's state register (CXL_PSL_SR_An) to disable the secondary hash in the hardware since we can no longer fill out entries using it. Signed-off-by: NIan Munsie <imunsie@au1.ibm.com> Reviewed-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 16 10月, 2014 2 次提交
-
-
由 Vinod Koul 提交于
carma-fpga driver uses device control with custom FSLDMA_EXTERNAL_START command. Since we wnat to deprecate the device control, move this driver to use new fsl_dma_external_start() API Signed-off-by: NVinod Koul <vinod.koul@intel.com>
-
由 Vinod Koul 提交于
The drivers should use dmaengine_slave_config() and dmaengine_prep_dma_sg() API instead of accessing the device_control which will be deprecated soon Signed-off-by: NVinod Koul <vinod.koul@intel.com>
-
- 15 10月, 2014 1 次提交
-
-
由 Michael S. Tsirkin 提交于
Replace duplicated code in all transports with a single wrapper in virtio.c. The only functional change is in virtio_mmio.c: if a buggy device sends us an interrupt before driver is set, we previously returned IRQ_NONE, now we return IRQ_HANDLED. As this must not happen in practice, this does not look like a big deal. See also commit 3fff0179 virtio-pci: do not oops on config change if driver not loaded. for the original motivation behind the driver check. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
- 14 10月, 2014 1 次提交
-
-
由 Rasmus Villemoes 提交于
The kernel used to contain two functions for length-delimited, case-insensitive string comparison, strnicmp with correct semantics and a slightly buggy strncasecmp. The latter is the POSIX name, so strnicmp was renamed to strncasecmp, and strnicmp made into a wrapper for the new strncasecmp to avoid breaking existing users. To allow the compat wrapper strnicmp to be removed at some point in the future, and to avoid the extra indirection cost, do s/strnicmp/strncasecmp/g. Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk> Cc: "Igor M. Liplianin" <liplianin@netup.ru> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 09 10月, 2014 3 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Ian Munsie 提交于
If afu_read() returned due to a signal or the AFU file descriptor being opened non-blocking it would not call finish_wait() before returning, which could lead to a crash later when something else wakes up the wait queue. This patch restructures the wait logic to ensure that the cleanup is done correctly. Signed-off-by: NIan Munsie <imunsie@au1.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 08 10月, 2014 3 次提交
-
-
由 Ian Munsie 提交于
Signed-off-by: NIan Munsie <imunsie@au1.ibm.com> Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Ian Munsie 提交于
This is the core of the cxl driver. It adds support for using cxl cards in the powernv environment only (ie POWER8 bare metal). It allows access to cxl accelerators by userspace using the /dev/cxl/afuM.N char devices. The kernel driver has no knowledge of the function implemented by the accelerator. It provides services to userspace via the /dev/cxl/afuM.N devices. When a program opens this device and runs the start work IOCTL, the accelerator will have coherent access to that processes memory using the same virtual addresses. That process may mmap the device to access any MMIO space the accelerator provides. Also, reads on the device will allow interrupts to be received. These services are further documented in a later patch in Documentation/powerpc/cxl.txt. Documentation of the cxl hardware architecture and userspace API is provided in subsequent patches. Signed-off-by: NIan Munsie <imunsie@au1.ibm.com> Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Ian Munsie 提交于
This adds the base cxl support that cannot be built as a module. Specifically it adds the cxl callbacks that are called from the core powerpc mm code which must always exist irrespective of if the cxl module is loaded or not. This is similar to how cell works with CONFIG_SPU_BASE. This adds a cxl_slbia() call (similar to spu_flush_all_slbs()) which checks if the cxl module is loaded and in use, returning immediately if it is not. If it is in use it calls into the cxl SLB invalidation code. Signed-off-by: NIan Munsie <imunsie@au1.ibm.com> Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 30 9月, 2014 1 次提交
-
-
由 Fengguang Wu 提交于
CC: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: NFengguang Wu <fengguang.wu@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 29 9月, 2014 18 次提交
-
-
由 Alexander Usyskin 提交于
Add missed parameters descriptions and return values descriptions Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alexander Usyskin 提交于
Fix Kdoc documentation formatting warnings genertaed by ./scripts/kernel-doc Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alexander Usyskin 提交于
me_client_presentation_num field is not used for any particular purpose now, so it can be safely dropped. Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alexander Usyskin 提交于
Fix misspellings and wrong print texts Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tomas Winkler 提交于
Remove inclusion of linux/pci.h in mei layer however we need to include the headers that before got included implicitly from linux/pci.h. Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tomas Winkler 提交于
Device specific configurations are currently only needed by me hw so we can remove it from txe Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tomas Winkler 提交于
For purpose of adding testing HW we would like to get rid of pci dependency in generic mei code. Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tomas Winkler 提交于
fw status retrieval has pci specific implementation so we push it back to the hw layer Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tomas Winkler 提交于
For purpose of adding testing HW we would like to get rid of pci dependency in generic mei code This patch provides only straight forward changes FW status and prob quirks need to be handled separately Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tomas Winkler 提交于
Setting of hw_ops and device has should be in mei_device_init. We add reference to the parent device and remove pci dependent cfg Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tomas Winkler 提交于
mei_hbm_hder helper function is only used in hbm.c so there is no need to define it in a header file Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tomas Winkler 提交于
There is no need to log memory allocation errors as this is already done by the memory subsystem. Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tomas Winkler 提交于
fix style warning: void function return statements are not generally useful Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tomas Winkler 提交于
fix new style warning: Missing a blank line after declarations Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tomas Winkler 提交于
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tomas Winkler 提交于
Add indication whether the client operates in single buffer mode Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alexander Usyskin 提交于
In case of many me clients (15 and more) 1K buffer is not enough for full information print. Calculate buffer size according to real clients number. Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alexander Usyskin 提交于
Add hbm state, pg enablement and state to devstate file in debugfs (<debugfs>/mei/devstate) Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 26 9月, 2014 2 次提交
-
-
由 Geert Uytterhoeven 提交于
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be> Acked-by: N"Winkler, Tomas" <tomas.winkler@intel.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Lee Jones 提交于
Coverity reported: This less-than-zero comparison of an unsigned value is never true. In answer to that, we only ever decrement if protos_registered is positive. We can subsequently remove the paranoid checking during unregister. Cc: gregkh@linuxfoundation.org Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
- 25 9月, 2014 1 次提交
-
-
由 Francesco Ruggeri 提交于
Move PCI_VENDOR_ID_VMWARE from device-specific files to pci_ids.h. It is useful to always have access to it, especially when accessing subsystem_vendor_id on emulated devices. [bhelgaas: keep pci_ids.h sorted and use lower-case hex] Signed-off-by: NFrancesco Ruggeri <fruggeri@arista.com> Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
-