Undo a feature introduced in v3.14 by commit fcd46b34
"firewire: Enable remote DMA above 4 GB".  That change raised the
minimum address at which protocol drivers and user programs can register
for request reception from 0x0001'0000'0000 to 0x8000'0000'0000.
It turned out that at least one vendor-specific protocol exists which
uses lower addresses:  https://bugzilla.kernel.org/show_bug.cgi?id=76921

For the time being, revert most of commit fcd46b34 so that affected
protocols work like with kernel v3.13 and before.  Just keep the valid
documentation parts from the regressing commit, and the ability to
identify controllers which could be programmed to accept >32 bit
physical DMA addresses.  The rest of fcd46b34 should probably be
brought back as an optional instead of default feature.
Reported-by: NFabien Spindler <fabien.spindler@inria.fr>
Cc: <stable@vger.kernel.org> # 3.14+
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

lockdep complains about a circular locking.  And indeed, we need to
release the lock before calling dm_table_run_md_queue_async().

As such, commit 4cdd2ad7 ("dm mpath: fix lock order inconsistency in
multipath_ioctl") must also be reverted in addition to fixing the
lock order in the other dm_table_run_md_queue_async() callers.
Reported-by: NBart van Assche <bvanassche@acm.org>
Tested-by: NBart van Assche <bvanassche@acm.org>
Signed-off-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

When there isn't enough vring descriptor for adding to vq,
blk-mq will be put as stopped state until some of pending
descriptors are completed & freed.

Unfortunately, the vq's interrupt may come just before
blk-mq's BLK_MQ_S_STOPPED flag is set, so the blk-mq will
still be kept as stopped even though lots of descriptors
are completed and freed in the interrupt handler. The worst
case is that all pending descriptors are freed in the
interrupt handler, and the queue is kept as stopped forever.

This patch fixes the problem by starting/stopping blk-mq
with holding vq_lock.

Cc: Jens Axboe <axboe@kernel.dk>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NMing Lei <tom.leiming@gmail.com>
Cc: stable@kernel.org
Signed-off-by: NJens Axboe <axboe@fb.com>

Conflicts:
	drivers/block/virtio_blk.c

The DM cache target cannot cope with discards that span multiple cache
blocks, so each discard bio that spans more than one cache block must
get split by the DM core.
Signed-off-by: NHeinz Mauelshagen <heinzm@redhat.com>
Acked-by: NJoe Thornber <ejt@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org # v3.9+

Most of the affected models share pnp-ids for the touchpad. So switching
to pnp-ids give us 2 advantages:
1) It shrinks the quirk list
2) It will lower the new quirk addition frequency, ie the recently added W540
   quirk would not have been necessary since it uses the same LEN0034 pnp ids
   as other models already added before it

As an added bonus it actually puts the quirk on the actual psmouse, rather
then on the machine, which is technically more correct.

Cc: stable@vger.kernel.org
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

This is a preparation patch for simplifying the min/max quirk table.

Cc: stable@vger.kernel.org
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

The T540p has a touchpad with pnp-id LEN0034, all the models with this
pnp-id have the same min/max values, except the T540p where the values are
slightly off. Fix them to be identical.

This is a preparation patch for simplifying the quirk table.

Cc: stable@vger.kernel.org
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

When the thermal module is to be removed, we should destroy the wq
acpi_thermal_pm_queue after the ACPI driver's remove callback is
executed as we will need to flush the workqueue there, or a NULL pointer
access will be hit.
Reported-and-tested-by: NKui Zhang <kuizhang@gmail.com>
References: http://www.spinics.net/lists/kernel/msg1747251.html
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: NAaron Lu <aaron.lu@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

The mapping from OF device IDs to platform device IDs is wrong.
TYPE_NCPXXWB473 is 0, TYPE_NCPXXWL333 is 1, so
ntc_thermistor_id[TYPE_NCPXXWB473] is { "ncp15wb473", TYPE_NCPXXWB473 }
while
ntc_thermistor_id[TYPE_NCPXXWL333] is { "ncp18wb473", TYPE_NCPXXWB473 }.

So the name is wrong for all but the "ntc,ncp15wb473" entry, and the
type is wrong for the "ntc,ncp15wl333" entry.

So map the entries by index, it is neither elegant nor robust but at
least it is correct.
Signed-off-by: NJean Delvare <jdelvare@suse.de>
Fixes: 9e8269de hwmon: (ntc_thermistor) Add DT with IIO support to NTC thermistor driver
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Cc: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Cc: Doug Anderson <dianders@chromium.org>

In commit 9e8269de, support was added for ntc_thermistor devices being
declared in the device tree and implemented on top of IIO. With that
change, a dependency was added to the ntc_thermistor driver:

	depends on (!OF && !IIO) || (OF && IIO)

This construct has the drawback that the driver can no longer be
selected when OF is set and IIO isn't, nor when IIO is set and OF is
not. This is a regression for the original users of the driver.

As the new code depends on IIO and is useless without OF, include it
only if both are enabled, and set the dependencies accordingly. This
is clearer, more simple and more correct.
Signed-off-by: NJean Delvare <jdelvare@suse.de>
Fixes: 9e8269de hwmon: (ntc_thermistor) Add DT with IIO support to NTC thermistor driver
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Cc: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Cc: Doug Anderson <dianders@chromium.org>

When it fails to allocate div, gate should be free'd before return
Signed-off-by: NValentin Ilie <valentin.ilie@gmail.com>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

Commit 1d9fe6b97 ("clk: divider: Fix best div calculation for power-of-two and
table dividers") introduces a regression in its _table_round_up function.

When the divider passed to this function is greater than the max divider
available in the table, this function returns table's max divider.
Problem is that it causes an infinite loop in clk_divider_bestdiv() because
_next_div() will never return a value greater than maxdiv.

Instead of returning table's max divider, this patch returns INT_MAX.
Reported-by: NFabio Estevam <festevam@gmail.com>
Reported-by: NShawn Guo <shawn.guo@freescale.com>
Tested-by: NFabio Estevam <festevam@gmail.com>
Tested-by: NShawn Guo <shawn.guo@freescale.com>
Signed-off-by: NMaxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

The recent change in sysfs, bcdde7e2
"sysfs: make __sysfs_remove_dir() recursive" revealed an asymmetric
rphy device creation/deletion sequence in scsi_transport_sas:

  modprobe mpt2sas
    sas_rphy_add
      device_add A               rphy->dev
      device_add B               sas_device transport class
      device_add C               sas_end_device transport class
      device_add D               bsg class

  rmmod mpt2sas
    sas_rphy_delete
      sas_rphy_remove
        device_del B
        device_del C
        device_del A
          sysfs_remove_group     recursive sysfs dir removal
      sas_rphy_free
        device_del D             warning

  where device A is the parent of B, C, and D.

When sas_rphy_free tries to unregister the bsg request queue (device D
above), the ensuing sysfs cleanup discovers that its sysfs group has
already been removed and emits a warning, "sysfs group... not found for
kobject 'end_device-X:0'".

Since bsg creation is a side effect of sas_rphy_add, move its
complementary removal call into sas_rphy_remove. This imposes the
following tear-down order for the devices above: D, B, C, A.

Note the sas_device and sas_end_device transport class devices (B and C
above) are created and destroyed both via the list match traversal in
attribute_container_device_trigger, so the order in which they are
handled is fixed. This is fine as long as they are deleted before their
parent device.
Signed-off-by: NJoe Lawrence <joe.lawrence@stratus.com>
Acked-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Current code only touches the direction register when setting direction
to output, which breaks logic like

echo high > /sys/class/gpio/gpio0/direction

which is expected to also set the value. This patch also adds a call
to update the value register when setting direction to output.
Signed-off-by: NAlexey Charkov <alchark@gmail.com>
Acked-by: NTony Prisk <linux@prisktech.co.nz>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

ALB learning packets are currentlyalways sent using the slave mac
address for all vlans configured on top of bond.   This is not always
correct, as vlans may change their mac address.
This patch introduced a concept of strict matching where the
source of learning packets can either strictly match the address
passed in, or it can determine a more correct address to use.

There are 3 casese to consider:
  1) Switchover.  In this case, we have a new active slave and we need
     tell the switch about all addresses available on the slave.
  2) Monitor.  We'll periodically refresh learning info for all slaves.
     In this case, we refresh all addresses for current active, and just
     the slave address for other slaves.
  3) Teaching of disabled adddress.  This happens as part of the
     failover and in this case, we alwyas to use just the address
     provided.

CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: NVlad Yasevich <vyasevic@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

TLB/ALB learning packets always assume 802.1Q vlan protocol, but
that is no longer the case since we now have support for Q-in-Q
on top of bonding.  Pass the vlan protocol to alb_send_lp_vid()
so that the packets are properly tagged.

CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: NVlad Yasevich <vyasevic@redhat.com>
Acked-by: NVeaceslav Falico <vfalico@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The stmmac_open call was calling clk_disable_unprepare on phy init
failure, but it never calls clk_prepare_enable, this causes
a WARN_ON in the clk framework to trigger if for some reason phy init
fails.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com>
Acked-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

tc_mode() can be called from interrupt context and thus must not call
clk_*prepare*() functions.
Signed-off-by: NDavid Jander <david@protonic.nl>
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>

irqchip will reject the affinity set to CPUs which is not online
yet. but in the CPU1 wakeup stage, OS only sets CPU1 to be online
after local timer is set, so that causes the irq_set_affinity not
work. this patch moves to irq_force_affinity() for the low level
boot stage.
Signed-off-by: NZhiwu Song <Zhiwu.Song@csr.com>
Signed-off-by: NBarry Song <Baohua.Song@csr.com>
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>

The count which is used to get_unmap_data maybe not the same as the
count computed in dmaengine_unmap which causes to free data in a
wrong pool.

This patch fixes this issue by keeping the map count with unmap_data
structure and use this count to get the pool.

Cc: <stable@vger.kernel.org>
Signed-off-by: NXuelin Shi <xuelin.shi@freescale.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

We need to use writel() instead of writel_relaxed() when starting
a channel, to ensure all the descriptors have been flushed before
the activation.

While at it, remove the unneeded read-modify-write and make the
code simpler.

Cc: <stable@vger.kernel.org>
Signed-off-by: NLior Amsalem <alior@marvell.com>
Signed-off-by: NEzequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

As remarked by Christopher R. Baker in his post at

http://marc.info/?l=linux-can&m=139707295706465&w=2

there's a possibility for an use after free condition at device removal.

This simplified patch introduces an additional variable to prevent the issue.
Thanks for catching this.

Cc: linux-stable <stable@vger.kernel.org>
Reported-by: NChristopher R. Baker <cbaker@rec.ri.cmu.edu>
Signed-off-by: NStephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

The sa11x0_dma_pm_ops unconditionally reference sa11x0_dma_resume
and sa11x0_dma_suspend, which currently breaks if CONFIG_PM_SLEEP
is disabled.

There is probably a better way to remove the reference in this
case, but the safe choice is to have the suspend/resume code always
built in the driver.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: dmaengine@vger.kernel.org
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

Commit 85ad643b ("dm thin: add timeout to stop out-of-data-space mode
holding IO forever") introduced a fixed 60 second timeout.  Users may
want to either disable or modify this timeout.

Allow the out-of-data-space timeout to be configured using the
'no_space_timeout' dm-thin-pool module param.  Setting it to 0 will
disable the timeout, resulting in IO being queued until more data space
is added to the thin-pool.
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org # 3.14+

When the PX card is off don't try and access it. Avoid hw access
to the card while it's off (e.g., reading back invalid temperature).

v2: be less strict

bug:
https://bugzilla.kernel.org/show_bug.cgi?id=76321Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: NChristian König <christian.koenig@amd.com>

When accel is not working on device with virtual address space radeon
segfault because the ib buffer is NULL and trying to map it inside the
virtual address space trigger segfault. This patch only map the ib
buffer if accel is working.

Cc: <stable@vger.kernel.org>
Signed-off-by: NJérôme Glisse <jglisse@redhat.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>

Otherwise the limit is raised to high.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Tested-by: NKen Moffat <zarniwhoop@ntlworld.com>

Probably a copy paste typo.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org

Some buffers (UVD/VM page tables) must be placed in VRAM,
but the byte restriction for moving buffers didn't took this
into account.

v2: keep closer to the original code
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NMarek Olšák <marek.olsak@amd.com>

Take padding into account as well.

Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=75651Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

Newer PX systems have non-VGA pci class dGPUs.  Update
the ATRM fetch method to handle those cases.

bug:
https://bugzilla.kernel.org/show_bug.cgi?id=75401Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org

Mullins is DCE83 just like Kabini.  Set the proper number
of endpoints on mullins.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>

v2 (chk): fix image size storage
v3 (chk): fix UV size calculation
Signed-off-by: NLeo Liu <leo.liu@amd.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>

Placing them exclusively into VRAM might not work all the time.

Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=78297Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Fixes a LVDS bleed issue on Lenovo W530 that can occur under a
number of circumstances.

Cc: <stable@vger.kernel.org > # v3.9+
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NMartin Peres <martin.peres@free.fr>
Tested-by: NSaveTheRobots <john.rowley08@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This driver is using devres managed calls incorrectly, giving the cpu0
device as first parameter instead of the cpufreq platform device.
This results in resources not being freed if the cpufreq platform device
is unbound, for example if probing has to be deferred for a missing
regulator.
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Cc: 3.9+ <stable@vger.kernel.org> # 3.9+
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

While accessing cur_policy during executing events
CPUFREQ_GOV_START, CPUFREQ_GOV_STOP, CPUFREQ_GOV_LIMITS,
same mutex lock is not taken, dbs_data->mutex, which leads
to race and data corruption while running continious suspend
resume test. This is seen with ondemand governor with suspend
resume test using rtcwake.

 Unable to handle kernel NULL pointer dereference at virtual address 00000028
 pgd = ed610000
 [00000028] *pgd=adf11831, *pte=00000000, *ppte=00000000
 Internal error: Oops: 17 [#1] PREEMPT SMP ARM
 Modules linked in: nvhost_vi
 CPU: 1 PID: 3243 Comm: rtcwake Not tainted 3.10.24-gf5cf9e5 #1
 task: ee708040 ti: ed61c000 task.ti: ed61c000
 PC is at cpufreq_governor_dbs+0x400/0x634
 LR is at cpufreq_governor_dbs+0x3f8/0x634
 pc : [<c05652b8>] lr : [<c05652b0>] psr: 600f0013
 sp : ed61dcb0 ip : 000493e0 fp : c1cc14f0
 r10: 00000000 r9 : 00000000 r8 : 00000000
 r7 : eb725280 r6 : c1cc1560 r5 : eb575200 r4 : ebad7740
 r3 : ee708040 r2 : ed61dca8 r1 : 001ebd24 r0 : 00000000
 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
 Control: 10c5387d Table: ad61006a DAC: 00000015
 [<c05652b8>] (cpufreq_governor_dbs+0x400/0x634) from [<c055f700>] (__cpufreq_governor+0x98/0x1b4)
 [<c055f700>] (__cpufreq_governor+0x98/0x1b4) from [<c0560770>] (__cpufreq_set_policy+0x250/0x320)
 [<c0560770>] (__cpufreq_set_policy+0x250/0x320) from [<c0561dcc>] (cpufreq_update_policy+0xcc/0x168)
 [<c0561dcc>] (cpufreq_update_policy+0xcc/0x168) from [<c0561ed0>] (cpu_freq_notify+0x68/0xdc)
 [<c0561ed0>] (cpu_freq_notify+0x68/0xdc) from [<c008eff8>] (notifier_call_chain+0x4c/0x8c)
 [<c008eff8>] (notifier_call_chain+0x4c/0x8c) from [<c008f3d4>] (__blocking_notifier_call_chain+0x50/0x68)
 [<c008f3d4>] (__blocking_notifier_call_chain+0x50/0x68) from [<c008f40c>] (blocking_notifier_call_chain+0x20/0x28)
 [<c008f40c>] (blocking_notifier_call_chain+0x20/0x28) from [<c00aac6c>] (pm_qos_update_bounded_target+0xd8/0x310)
 [<c00aac6c>] (pm_qos_update_bounded_target+0xd8/0x310) from [<c00ab3b0>] (__pm_qos_update_request+0x64/0x70)
 [<c00ab3b0>] (__pm_qos_update_request+0x64/0x70) from [<c004b4b8>] (tegra_pm_notify+0x114/0x134)
 [<c004b4b8>] (tegra_pm_notify+0x114/0x134) from [<c008eff8>] (notifier_call_chain+0x4c/0x8c)
 [<c008eff8>] (notifier_call_chain+0x4c/0x8c) from [<c008f3d4>] (__blocking_notifier_call_chain+0x50/0x68)
 [<c008f3d4>] (__blocking_notifier_call_chain+0x50/0x68) from [<c008f40c>] (blocking_notifier_call_chain+0x20/0x28)
 [<c008f40c>] (blocking_notifier_call_chain+0x20/0x28) from [<c00ac228>] (pm_notifier_call_chain+0x1c/0x34)
 [<c00ac228>] (pm_notifier_call_chain+0x1c/0x34) from [<c00ad38c>] (enter_state+0xec/0x128)
 [<c00ad38c>] (enter_state+0xec/0x128) from [<c00ad400>] (pm_suspend+0x38/0xa4)
 [<c00ad400>] (pm_suspend+0x38/0xa4) from [<c00ac114>] (state_store+0x70/0xc0)
 [<c00ac114>] (state_store+0x70/0xc0) from [<c027b1e8>] (kobj_attr_store+0x14/0x20)
 [<c027b1e8>] (kobj_attr_store+0x14/0x20) from [<c019cd9c>] (sysfs_write_file+0x104/0x184)
 [<c019cd9c>] (sysfs_write_file+0x104/0x184) from [<c0143038>] (vfs_write+0xd0/0x19c)
 [<c0143038>] (vfs_write+0xd0/0x19c) from [<c0143414>] (SyS_write+0x4c/0x78)
 [<c0143414>] (SyS_write+0x4c/0x78) from [<c000f080>] (ret_fast_syscall+0x0/0x30)
 Code: e1a00006 eb084346 e59b0020 e5951024 (e5903028)
 ---[ end trace 0488523c8f6b0f9d ]---
Signed-off-by: NBibek Basu <bbasu@nvidia.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Cc: 3.11+ <stable@vger.kernel.org> # 3.11+
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

The commit e783c51c (ahci: imx: software workaround for phy reset issue
in resume) calls imx_sata_phy_reset() to reset phy immediately after
SATA MPLL is enabled.  It seems working fine mostly, but fails in some
case as below.

...
ahci-imx 2200000.sata: failed to reset phy: -110
ahci-imx: probe of 2200000.sata failed with error -110

After talking to the designer, we learnt that when enabling i.MX6Q SATA
MPLL, we need to wait 100us for it to settle down for safety.  Add this
required delay to fix above failure.
Signed-off-by: NShawn Guo <shawn.guo@freescale.com>
Tested-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

The incorrect register offset is passed to pci_wait_for_pending(), which is
caused by commit 157e876f ("PCI: Add pci_wait_for_pending() (refactor
pci_wait_for_pending_transaction())").

Fixes: 157e876f ("PCI: Add pci_wait_for_pending() (refactor pci_wait_for_pending_transaction())
Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NAlex Williamson <alex.williamson@gmail.com>
CC: stable@vger.kernel.org	# v3.14+