The alignment is missing for various global symbols in s390 assembly code.
With a recent gcc and an instruction like stgrl this can lead to a
specification exception if the instruction uses such a mis-aligned address.

Specify the alignment explicitely and while add it define __ALIGN for s390
and use the ENTRY define to save some lines of code.
Signed-off-by: NJan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

The entry to / exit from sie has subtle dependencies to the first level
interrupt handler. Move the sie assembler code to entry64.S and replace
the SIE_HOOK callback with a test and the new _TIF_SIE bit.
In addition this patch fixes several problems in regard to the check for
the_TIF_EXIT_SIE bits. The old code checked the TIF bits before executing
the interrupt handler and it only modified the instruction address if it
pointed directly to the sie instruction. In both cases it could miss
a TIF bit that normally would cause an exit from the guest and would
reenter the guest context.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

When running a kvm guest we can get intercepts for tprot, if the host
page table is read-only or not populated. This patch implements the
most common case (linux memory detection).
This also allows host copy on write for guest memory on newer systems.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

The following race can occur with qdio devices that use the shared device
state change indicator:

Device (Shared DSCI)    CPU0                            CPU1
===============================================================================

1. DSCI 0 => 1,
   INT pending
                        2. Thinint handler
                        * si_used = 1
                        * Inbound tasklet_schedule
                        * DSCI 1 => 0

3. DSCI 0 => 1,
   INT pending

                                                        4. Thinint handler
                                                        * si_used = 1
                                                        * Inbound tasklet_schedu
le
                                                           => NOP

                        5. Inbound tasklet run

6. DSCI = 1,
   INT surpressed

                                                        7. DSCI 1 => 0

The race would lead to a stall where new data in the input queue is
not recognized so the device stops working in case of no further traffic.

Fix the race by resetting the DSCI before scheduling the inbound tasklet
so the device generates an interrupt if new data arrives in the above
scenario in step 6.
Reviewed-by: NUrsula Braun <ursula.braun@de.ibm.com>
Signed-off-by: NJan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

On x86 a page without a mapper is by definition not referenced / old.
The s390 architecture keeps the reference bit in the storage key and
the current code will check the storage key for page without a mapper.
This leads to an interesting effect: the first time an s390 system
needs to write pages to swap it only finds referenced pages. This
causes a lot of pages to get added and written to the swap device.
To avoid this behaviour change page_referenced to query the storage
key only if there is a mapper of the page.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Do not trace arch_local_save_flags(), arch_local_irq_*() and friends.
Although they are marked inline, gcc may still make a function out of
them and add it to the pool of functions that are traced by the function
tracer. This can cause undesirable results (kernel panic, triple faults,
etc).

Add the notrace notation to prevent them from ever being traced.

Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

There is nothing below the menu entry "S/390 tape interface support".
Remove it.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (43 commits)
  Blackfin: spi-docs: further clarify GPIO CS behavior with various modes
  Blackfin: boards: fix pcm device name
  Blackfin: SMP: punt unused atomic_test_mask helper
  Blackfin: irqs: do not trace arch_local_{*,irq_*} functions
  Blackfin: bf526: restrict reboot workaround to 0.0 silicon
  Blackfin: bf51x: fix alternative portmux options
  Blackfin: bf54x: fix GPIO resume code
  Blackfin: dpmc: optimize SDRAM programming slightly
  Blackfin: dpmc: don't save/restore scratch registers
  Blackfin: bf538: pull gpio/port logic out of core hibernate paths
  Blackfin: dpmc: optimize hibernate/resume path
  Blackfin: dpmc: do not save/restore EVT0/EVT1/EVT4 when hibernating
  Blackfin: dpmc: relocate hibernate helper macros
  Blackfin: dpmc: omit RETE/RETN when hibernating
  Blackfin: dpmc: optimize SIC_IWR programming a little
  Blackfin: gpio/ints: generalize pint logic
  Blackfin: dpmc: bind to MMR names and not CPUs
  Blackfin: debug-mmrs: generalize pint logic
  Blackfin: bf54x: switch to common pint MMR struct
  Blackfin: bf54x: tweak MMR pint names
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regulator: Convert tps65023 to use regmap API
  regmap: Add SPI bus support
  regmap: Add I2C bus support
  regmap: Add generic non-memory mapped register access API

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (77 commits)
  [SCSI] fix crash in scsi_dispatch_cmd()
  [SCSI] sr: check_events() ignore GET_EVENT when TUR says otherwise
  [SCSI] bnx2i: Fixed kernel panic due to illegal usage of sc->request->cpu
  [SCSI] bfa: Update the driver version to 3.0.2.1
  [SCSI] bfa: Driver and BSG enhancements.
  [SCSI] bfa: Added support to query PHY.
  [SCSI] bfa: Added HBA diagnostics support.
  [SCSI] bfa: Added support for flash configuration
  [SCSI] bfa: Added support to obtain SFP info.
  [SCSI] bfa: Added support for CEE info and stats query.
  [SCSI] bfa: Extend BSG interface.
  [SCSI] bfa: FCS bug fixes.
  [SCSI] bfa: DMA memory allocation enhancement.
  [SCSI] bfa: Brocade-1860 Fabric Adapter vHBA support.
  [SCSI] bfa: Brocade-1860 Fabric Adapter PLL init fixes.
  [SCSI] bfa: Added Fabric Assigned Address(FAA) support
  [SCSI] bfa: IOC bug fixes.
  [SCSI] bfa: Enable ASIC block configuration and query.
  [SCSI] bnx2i: Updated copyright and bump version
  [SCSI] bnx2i: Modified to skip CNIC registration if iSCSI is not supported
  ...

Fix up some trivial conflicts in:
 - drivers/scsi/bnx2fc/{bnx2fc.h,bnx2fc_fcoe.c}:
	Crazy broadcom version number conflicts
 - drivers/target/tcm_fc/tfc_cmd.c
	Just trivial cleanups done on adjacent lines

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (297 commits)
  ALSA: asihpi - Replace with snd_ctl_boolean_mono_info()
  ALSA: asihpi - HPI version 4.08
  ALSA: asihpi - Add volume mute controls
  ALSA: asihpi - Control name updates
  ALSA: asihpi - Use size_t for sizeof result
  ALSA: asihpi - Explicitly include mutex.h
  ALSA: asihpi - Add new node and message defines
  ALSA: asihpi - Make local function static
  ALSA: asihpi - Fix minor typos and spelling
  ALSA: asihpi - Remove unused structures, macros and functions
  ALSA: asihpi - Remove spurious adapter index check
  ALSA: asihpi - Revise snd_pcm_debug_name, get rid of DEBUG_NAME macro
  ALSA: asihpi - DSP code loader API now independent of OS
  ALSA: asihpi - Remove controlex structs and associated special data transfer code
  ALSA: asihpi - Increase request and response buffer sizes
  ALSA: asihpi - Give more meaningful name to hpi request message type
  ALSA: usb-audio - Add quirk for  Roland / BOSS BR-800
  ALSA: hda - Remove a superfluous argument of via_auto_init_output()
  ALSA: hda - Fix indep-HP path (de-)activation for VT1708* codecs
  ALSA: hda - Add documentation for codec-specific mixer controls
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
  net/9p: Fix the msize calculation.
  fs/9p: add 9P2000.L unlinkat operation
  fs/9p: add 9P2000.L renameat operation
  fs/9p: Always ask new inode in create
  fs/9p: Clean-up get_protocol_version() to use strcmp
  fs/9p: Fix invalid mount options/args
  fs/9p: When doing inode lookup compare qid details and inode mode bits.
  fs/9p: Fid is not valid after a failed clunk.
  net/9p: Remove structure not used in the code
  VirtIO can transfer VIRTQUEUE_NUM of pages.
  Fix the size of receive buffer packing onto VirtIO ring.
  9p: clean up packet dump code
  fs/9p: remove rename work around in 9p
  net/9p: fix client code to fail more gracefully on protocol error

Refresh sysctl/kernel.txt.  More specifically,

 - drop stale index entries
 - sync and sort index and entries
 - reflow sticking out paragraphs to colwidth 72
 - correct typos
 - cleanup whitespace
Signed-off-by: NBorislav Petkov <bp@alien8.de>
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Only the root cpuset has cpuset.memory_pressure_enabled flag,
but not the only one.
Signed-off-by: NWanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Acked-by: NPaul Menage <menage@google.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Must echo a task id to the cgroups' tasks file, but not to a directory.
Signed-off-by: NWanlong Gao <gaowanlong@cn.fujitsu.com>
Acked-by: NPaul Menage <menage@google.com>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Merge branches 'x86-detect-hyper-for-linus', 'x86-fpu-for-linus', 'x86-kexec-for-linus', 'x86-platform-for-linus', 'x86-quirks-for-linus', 'x86-tsc-for-linus' and 'x86-smpboot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-detect-hyper-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, hyper: Change hypervisor detection order

* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86-32, fpu: Fix DNA exception during check_fpu()

* 'x86-kexec-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  kexec, x86: Fix incorrect jump back address if not preserving context

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, config: Introduce an INTEL_MID configuration

* 'x86-quirks-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, quirks: Use pci_dev->revision

* 'x86-tsc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: tsc: Remove unneeded DMI-based blacklisting

* 'x86-smpboot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, boot: Wait for boot cpu to show up if nr_cpus limit is about to hit

Merge branch 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, build: Do not set the root_dev field in bzImage

Merge branch 'x86-atomic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-atomic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Add support for cmpxchg_double

Merge branch 'timers-clocksource-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'timers-clocksource-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  clocksource: apb: Share APB timer code with other platforms

Merge branches 'x86-urgent-for-linus', 'core-debug-for-linus', 'irq-core-for-linus' and 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  um: Make rwsem.S depend on CONFIG_RWSEM_XCHGADD_ALGORITHM

* 'core-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  debug: Make CONFIG_EXPERT select CONFIG_DEBUG_KERNEL to unhide debug options

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  genirq: Remove unused CHECK_IRQ_PER_CPU()

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf tools, x86: Fix 32-bit compile on 64-bit system

msize represents the maximum PDU size that includes P9_IOHDRSZ.

Signed-off-by: Venkateswararao Jujjuri "<jvrao@linux.vnet.ibm.com>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

unlinkat - Remove a directory entry

size[4] Tunlinkat tag[2] dirfid[4] name[s] flag[4]
size[4] Runlinkat tag[2]

older Tremove have the below request format

size[4] Tremove tag[2] fid[4]

The remove message is used to remove a directory entry either file or directory
The remove opreation is actually a directory opertation and should ideally have
dirfid, if not we cannot represent the fid on server with anything other than
name. We will have to derive the directory name from fid in the Tremove request.

NOTE: The operation doesn't clunk the unlink fid.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

renameat - change name of file or directory

size[4] Trenameat tag[2] olddirfid[4] oldname[s] newdirfid[4] newname[s]
size[4] Rrenameat tag[2]

older Trename have the below request format

size[4] Trename tag[2] fid[4] newdirfid[4] name[s]

The rename message is used to change the name of a file, possibly moving it
to a new directory. The rename opreation is actually a directory opertation
and should ideally have olddirfid, if not we cannot represent the fid on server
with anything other than name. We will have to derive the old directory name
from fid in the Trename request.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

This make sure we don't end up reusing the unlinked inode object.
The ideal way is to use inode i_generation. But i_generation is
not available in userspace always.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

Signed-off-by: NPrem Karat <prem.karat@linux.vnet.ibm.com>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

Without this fix, if any invalid mount options/args are passed while mouting
the 9p fs, no error (-EINVAL) is returned and default arg value is assigned.

This fix returns -EINVAL when an invalid arguement is found while parsing
mount options.
Signed-off-by: NPrem Karat <prem.karat@linux.vnet.ibm.com>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

This make sure we don't use wrong inode from the inode hash. The inode number
of the file deleted is reused by the next file system object created
and if we only use inode number for inode hash lookup we could end up
with wrong struct inode.

Also compare inode generation number. Not all Linux file system provide
st_gen in userspace. So it could be 0;
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

free the fid even in case of failed clunk.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

Signed-off-by: Venkateswararao Jujjuri "<jvrao@linux.vnet.ibm.com>
Reviewed-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

Signed-off-by: Venkateswararao Jujjuri "<jvrao@linux.vnet.ibm.com>
Reviewed-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

Switch to generic kernel hexdump library and cleanup macros to
be more consistent with the way we do normal debug prints.
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

Now that VFS does the right thing remove the work around.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

There was a BUG_ON to protect against a bad id which could be dealt with
more gracefully.
Reported-by: NNatalie Orlin <norlin@us.ibm.com>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: NLiam Girdwood <lrg@ti.com>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: NLiam Girdwood <lrg@ti.com>
Acked-by: NWolfram Sang <w.sang@pengutronix.de>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: NLiam Girdwood <lrg@ti.com>
Acked-by: NWolfram Sang <w.sang@pengutronix.de>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>

There are many places in the tree where we implement register access for
devices on non-memory mapped buses, especially I2C and SPI. Since hardware
designers seem to have settled on a relatively consistent set of register
interfaces this can be effectively factored out into shared code.  There
are a standard set of formats for marshalling data for exchange with the
device, with the actual I/O mechanisms generally being simple byte
streams.

We create an abstraction for marshaling data into formats which can be
sent on the control interfaces, and create a standard method for
plugging in actual transport underneath that.

This is mostly a refactoring and renaming of the bottom level of the
existing code for sharing register I/O which we have in ASoC. A
subsequent patch in this series converts ASoC to use this.  The main
difference in interface is that reads return values by writing to a
location provided by a pointer rather than in the return value, ensuring
we can use the full range of the type for register data.  We also use
unsigned types rather than ints for the same reason.

As some of the devices can have very large register maps the existing
ASoC code also contains infrastructure for managing register caches.
This cache work will be moved over in a future stage to allow for
separate review, the current patch only deals with the physical I/O.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: NLiam Girdwood <lrg@ti.com>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Acked-by: NWolfram Sang <w.sang@pengutronix.de>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>

virtio has been so far used only in the context of virtualization,
and the virtio Kconfig was sourced directly by the relevant arch
Kconfigs when VIRTUALIZATION was selected.

Now that we start using virtio for inter-processor communications,
we need to source the virtio Kconfig outside of the virtualization
scope too.

Moreover, some architectures might use virtio for both virtualization
and inter-processor communications, so directly sourcing virtio
might yield unexpected results due to conflicting selections.

The simple solution offered by this patch is to always source virtio's
Kconfig in drivers/Kconfig, and remove it from the appropriate arch
Kconfigs. Additionally, a virtio menu entry has been added so virtio
drivers don't show up in the general drivers menu.

This way anyone can use virtio, though it's arguably less accessible
(and neat!) for virtualization users now.

Note: some architectures (mips and sh) seem to have a VIRTUALIZATION
menu merely for sourcing virtio's Kconfig, so that menu is removed too.
Signed-off-by: NOhad Ben-Cohen <ohad@wizery.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>