Skip to content

K
Kernel

openeuler / Kernel
12 个月 前同步成功

通知 5
Star 0
Fork 0
K
Kernel

体验新版 GitCode，发现更多精彩内容 >>

切换分支/标签
  1. 25 4月, 2019 3 次提交
  3. 23 4月, 2019 2 次提交
  5. 20 4月, 2019 1 次提交
    • A
      coredump: fix race condition between mmget_not_zero()/get_task_mm() and core dumping · 04f5866e
      由 Andrea Arcangeli 提交于 
      The core dumping code has always run without holding the mmap_sem for
writing, despite that is the only way to ensure that the entire vma
layout will not change from under it.  Only using some signal
serialization on the processes belonging to the mm is not nearly enough.
This was pointed out earlier.  For example in Hugh's post from Jul 2017:

  https://lkml.kernel.org/r/alpine.LSU.2.11.1707191716030.2055@eggly.anvils

  "Not strictly relevant here, but a related note: I was very surprised
   to discover, only quite recently, how handle_mm_fault() may be called
   without down_read(mmap_sem) - when core dumping. That seems a
   misguided optimization to me, which would also be nice to correct"

In particular because the growsdown and growsup can move the
vm_start/vm_end the various loops the core dump does around the vma will
not be consistent if page faults can happen concurrently.

Pretty much all users calling mmget_not_zero()/get_task_mm() and then
taking the mmap_sem had the potential to introduce unexpected side
effects in the core dumping code.

Adding mmap_sem for writing around the ->core_dump invocation is a
viable long term fix, but it requires removing all copy user and page
faults and to replace them with get_dump_page() for all binary formats
which is not suitable as a short term fix.

For the time being this solution manually covers the places that can
confuse the core dump either by altering the vma layout or the vma flags
while it runs.  Once ->core_dump runs under mmap_sem for writing the
function mmget_still_valid() can be dropped.

Allowing mmap_sem protected sections to run in parallel with the
coredump provides some minor parallelism advantage to the swapoff code
(which seems to be safe enough by never mangling any vma field and can
keep doing swapins in parallel to the core dumping) and to some other
corner case.

In order to facilitate the backporting I added "Fixes: 86039bd3"
however the side effect of this same race condition in /proc/pid/mem
should be reproducible since before 2.6.12-rc2 so I couldn't add any
other "Fixes:" because there's no hash beyond the git genesis commit.

Because find_extend_vma() is the only location outside of the process
context that could modify the "mm" structures under mmap_sem for
reading, by adding the mmget_still_valid() check to it, all other cases
that take the mmap_sem for reading don't need the new check after
mmget_not_zero()/get_task_mm().  The expand_stack() in page fault
context also doesn't need the new check, because all tasks under core
dumping are frozen.

Link: http://lkml.kernel.org/r/20190325224949.11068-1-aarcange@redhat.com
Fixes: 86039bd3 ("userfaultfd: add new syscall to provide memory externalization")
Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com>
Reported-by: NJann Horn <jannh@google.com>
Suggested-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NPeter Xu <peterx@redhat.com>
Reviewed-by: NMike Rapoport <rppt@linux.ibm.com>
Reviewed-by: NOleg Nesterov <oleg@redhat.com>
Reviewed-by: NJann Horn <jannh@google.com>
Acked-by: NJason Gunthorpe <jgg@mellanox.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      04f5866e
  7. 18 4月, 2019 1 次提交
    • J
      io_uring: fix CQ overflow condition · 74f464e9
      由 Jens Axboe 提交于 
      This is a leftover from when the rings initially were not free flowing,
and hence a test for tail + 1 == head would indicate full. Since we now
let them wrap instead of mask them with the size, we need to check if
they drift more than the ring size from each other.

This fixes a case where we'd overwrite CQ ring entries, if the user
failed to reap completions. Both cases would ultimately result in lost
completions as the application violated the depth it asked for. The only
difference is that before this fix we'd return invalid entries for the
overflowed completions, instead of properly flagging it in the
cq_ring->overflow variable.
Reported-by: NStefan Bühler <source@stbuehler.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
      74f464e9
  9. 16 4月, 2019 6 次提交
    • A
      CIFS: keep FileInfo handle live during oplock break · b98749ca
      由 Aurelien Aptel 提交于 
      In the oplock break handler, writing pending changes from pages puts
the FileInfo handle. If the refcount reaches zero it closes the handle
and waits for any oplock break handler to return, thus causing a deadlock.

To prevent this situation:

* We add a wait flag to cifsFileInfo_put() to decide whether we should
  wait for running/pending oplock break handlers

* We keep an additionnal reference of the SMB FileInfo handle so that
  for the rest of the handler putting the handle won't close it.
  - The ref is bumped everytime we queue the handler via the
    cifs_queue_oplock_break() helper.
  - The ref is decremented at the end of the handler

This bug was triggered by xfstest 464.

Also important fix to address the various reports of
oops in smb2_push_mandatory_locks
Signed-off-by: NAurelien Aptel <aaptel@suse.com>
Signed-off-by: NSteve French <stfrench@microsoft.com>
Reviewed-by: NPavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org>
      b98749ca
    • R
      cifs: fix handle leak in smb2_query_symlink() · e6d0fb7b
      由 Ronnie Sahlberg 提交于 
      If we enter smb2_query_symlink() for something that is not a symlink
and where the SMB2_open() would succeed we would never end up
closing this handle and would thus leak a handle on the server.

Fix this by immediately calling SMB2_close() on successfull open.
Signed-off-by: NRonnie Sahlberg <lsahlber@redhat.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: NSteve French <stfrench@microsoft.com>
Reviewed-by: NPavel Shilovsky <pshilov@microsoft.com>
      e6d0fb7b
    • Z
      cifs: Fix lease buffer length error · b57a55e2
      由 ZhangXiaoxu 提交于 
      There is a KASAN slab-out-of-bounds:
BUG: KASAN: slab-out-of-bounds in _copy_from_iter_full+0x783/0xaa0
Read of size 80 at addr ffff88810c35e180 by task mount.cifs/539

CPU: 1 PID: 539 Comm: mount.cifs Not tainted 4.19 #10
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
            rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014
Call Trace:
 dump_stack+0xdd/0x12a
 print_address_description+0xa7/0x540
 kasan_report+0x1ff/0x550
 check_memory_region+0x2f1/0x310
 memcpy+0x2f/0x80
 _copy_from_iter_full+0x783/0xaa0
 tcp_sendmsg_locked+0x1840/0x4140
 tcp_sendmsg+0x37/0x60
 inet_sendmsg+0x18c/0x490
 sock_sendmsg+0xae/0x130
 smb_send_kvec+0x29c/0x520
 __smb_send_rqst+0x3ef/0xc60
 smb_send_rqst+0x25a/0x2e0
 compound_send_recv+0x9e8/0x2af0
 cifs_send_recv+0x24/0x30
 SMB2_open+0x35e/0x1620
 open_shroot+0x27b/0x490
 smb2_open_op_close+0x4e1/0x590
 smb2_query_path_info+0x2ac/0x650
 cifs_get_inode_info+0x1058/0x28f0
 cifs_root_iget+0x3bb/0xf80
 cifs_smb3_do_mount+0xe00/0x14c0
 cifs_do_mount+0x15/0x20
 mount_fs+0x5e/0x290
 vfs_kern_mount+0x88/0x460
 do_mount+0x398/0x31e0
 ksys_mount+0xc6/0x150
 __x64_sys_mount+0xea/0x190
 do_syscall_64+0x122/0x590
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

It can be reproduced by the following step:
  1. samba configured with: server max protocol = SMB2_10
  2. mount -o vers=default

When parse the mount version parameter, the 'ops' and 'vals'
was setted to smb30,  if negotiate result is smb21, just
update the 'ops' to smb21, but the 'vals' is still smb30.
When add lease context, the iov_base is allocated with smb21
ops, but the iov_len is initiallited with the smb30. Because
the iov_len is longer than iov_base, when send the message,
copy array out of bounds.

we need to keep the 'ops' and 'vals' consistent.

Fixes: 9764c02f ("SMB3: Add support for multidialect negotiate (SMB2.1 and later)")
Fixes: d5c7076b ("smb3: add smb3.1.1 to default dialect list")
Signed-off-by: NZhangXiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: NSteve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: NPavel Shilovsky <pshilov@microsoft.com>
      b57a55e2
    • Z
      cifs: Fix use-after-free in SMB2_read · 088aaf17
      由 ZhangXiaoxu 提交于 
      There is a KASAN use-after-free:
BUG: KASAN: use-after-free in SMB2_read+0x1136/0x1190
Read of size 8 at addr ffff8880b4e45e50 by task ln/1009

Should not release the 'req' because it will use in the trace.

Fixes: eccb4422 ("smb3: Add ftrace tracepoints for improved SMB3 debugging")
Signed-off-by: NZhangXiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: NSteve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org> 4.18+
Reviewed-by: NPavel Shilovsky <pshilov@microsoft.com>
      088aaf17
    • Z
      cifs: Fix use-after-free in SMB2_write · 6a3eb336
      由 ZhangXiaoxu 提交于 
      There is a KASAN use-after-free:
BUG: KASAN: use-after-free in SMB2_write+0x1342/0x1580
Read of size 8 at addr ffff8880b6a8e450 by task ln/4196

Should not release the 'req' because it will use in the trace.

Fixes: eccb4422 ("smb3: Add ftrace tracepoints for improved SMB3 debugging")
Signed-off-by: NZhangXiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: NSteve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org> 4.18+
Reviewed-by: NPavel Shilovsky <pshilov@microsoft.com>
      6a3eb336
    • J
      io_uring: fix possible deadlock between io_uring_{enter,register} · b19062a5
      由 Jens Axboe 提交于 
      If we have multiple threads, one doing io_uring_enter() while the other
is doing io_uring_register(), we can run into a deadlock between the
two. io_uring_register() must wait for existing users of the io_uring
instance to exit. But it does so while holding the io_uring mutex.
Callers of io_uring_enter() may need this mutex to make progress (and
eventually exit). If we wait for users to exit in io_uring_register(),
we can't do so with the io_uring mutex held without potentially risking
a deadlock.

Drop the io_uring mutex while waiting for existing callers to exit. This
is safe and guaranteed to make forward progress, since we already killed
the percpu ref before doing so. Hence later callers of io_uring_enter()
will be rejected.

Reported-by: syzbot+16dc03452dee970a0c3e@syzkaller.appspotmail.com
Signed-off-by: NJens Axboe <axboe@kernel.dk>
      b19062a5
  11. 15 4月, 2019 1 次提交
  13. 14 4月, 2019 3 次提交
    • J
      io_uring: drop io_file_put() 'file' argument · 3d6770fb
      由 Jens Axboe 提交于 
      Since the fget/fput handling was reworked in commit 09bb8394, we
never call io_file_put() with state == NULL (and hence file != NULL)
anymore. Remove that case.
Reported-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
      3d6770fb
    • J
      io_uring: only test SQPOLL cpu after we've verified it · 917257da
      由 Jens Axboe 提交于 
      We currently call cpu_possible() even if we don't use the CPU. Move the
test under the SQ_AFF branch, which is the only place where we'll use
the value. Do the cpu_possible() test AFTER we've limited it to a max
of NR_CPUS. This avoids triggering the following warning:

WARNING: CPU: 1 PID: 7600 at include/linux/cpumask.h:121 cpu_max_bits_warn

if CONFIG_DEBUG_PER_CPU_MAPS is enabled.

While in there, also move the SQ thread idle period assignment inside
SETUP_SQPOLL, as we don't use it otherwise either.

Reported-by: syzbot+cd714a07c6de2bc34293@syzkaller.appspotmail.com
Fixes: 6c271ce2 ("io_uring: add submission polling")
Signed-off-by: NJens Axboe <axboe@kernel.dk>
      917257da
    • J
      io_uring: park SQPOLL thread if it's percpu · 06058632
      由 Jens Axboe 提交于 
      kthread expects this, or we can throw a warning on exit:

WARNING: CPU: 0 PID: 7822 at kernel/kthread.c:399
__kthread_bind_mask+0x3b/0xc0 kernel/kthread.c:399
Kernel panic - not syncing: panic_on_warn set ...
CPU: 0 PID: 7822 Comm: syz-executor030 Not tainted 5.1.0-rc4-next-20190412
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
  __dump_stack lib/dump_stack.c:77 [inline]
  dump_stack+0x172/0x1f0 lib/dump_stack.c:113
  panic+0x2cb/0x72b kernel/panic.c:214
  __warn.cold+0x20/0x46 kernel/panic.c:576
  report_bug+0x263/0x2b0 lib/bug.c:186
  fixup_bug arch/x86/kernel/traps.c:179 [inline]
  fixup_bug arch/x86/kernel/traps.c:174 [inline]
  do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:272
  do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:291
  invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:973
RIP: 0010:__kthread_bind_mask+0x3b/0xc0 kernel/kthread.c:399
Code: 48 89 fb e8 f7 ab 24 00 4c 89 e6 48 89 df e8 ac e1 02 00 31 ff 49 89
c4 48 89 c6 e8 7f ad 24 00 4d 85 e4 75 15 e8 d5 ab 24 00 <0f> 0b e8 ce ab
24 00 5b 41 5c 41 5d 41 5e 5d c3 e8 c0 ab 24 00 4c
RSP: 0018:ffff8880a89bfbb8 EFLAGS: 00010293
RAX: ffff88808ca7a280 RBX: ffff8880a98e4380 RCX: ffffffff814bdd11
RDX: 0000000000000000 RSI: ffffffff814bdd1b RDI: 0000000000000007
RBP: ffff8880a89bfbd8 R08: ffff88808ca7a280 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: ffffffff87691148 R14: ffff8880a98e43a0 R15: ffffffff81c91e10
  __kthread_bind kernel/kthread.c:412 [inline]
  kthread_unpark+0x123/0x160 kernel/kthread.c:480
  kthread_stop+0xfa/0x6c0 kernel/kthread.c:556
  io_sq_thread_stop fs/io_uring.c:2057 [inline]
  io_sq_thread_stop fs/io_uring.c:2052 [inline]
  io_finish_async+0xab/0x180 fs/io_uring.c:2064
  io_ring_ctx_free fs/io_uring.c:2534 [inline]
  io_ring_ctx_wait_and_kill+0x133/0x510 fs/io_uring.c:2591
  io_uring_release+0x42/0x50 fs/io_uring.c:2599
  __fput+0x2e5/0x8d0 fs/file_table.c:278
  ____fput+0x16/0x20 fs/file_table.c:309
  task_work_run+0x14a/0x1c0 kernel/task_work.c:113
  exit_task_work include/linux/task_work.h:22 [inline]
  do_exit+0x90a/0x2fa0 kernel/exit.c:876
  do_group_exit+0x135/0x370 kernel/exit.c:980
  __do_sys_exit_group kernel/exit.c:991 [inline]
  __se_sys_exit_group kernel/exit.c:989 [inline]
  __x64_sys_exit_group+0x44/0x50 kernel/exit.c:989
  do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

Reported-by: syzbot+6d4a92619eb0ad08602b@syzkaller.appspotmail.com
Fixes: 6c271ce2 ("io_uring: add submission polling")
Signed-off-by: NJens Axboe <axboe@kernel.dk>
      06058632
  15. 13 4月, 2019 7 次提交
    • D
      afs: Fix in-progess ops to ignore server-level callback invalidation · eeba1e9c
      由 David Howells 提交于 
      The in-kernel afs filesystem client counts the number of server-level
callback invalidation events (CB.InitCallBackState* RPC operations) that it
receives from the server.  This is stored in cb_s_break in various
structures, including afs_server and afs_vnode.

If an inode is examined by afs_validate(), say, the afs_server copy is
compared, along with other break counters, to those in afs_vnode, and if
one or more of the counters do not match, it is considered that the
server's callback promise is broken.  At points where this happens,
AFS_VNODE_CB_PROMISED is cleared to indicate that the status must be
refetched from the server.

afs_validate() issues an FS.FetchStatus operation to get updated metadata -
and based on the updated data_version may invalidate the pagecache too.

However, the break counters are also used to determine whether to note a
new callback in the vnode (which would set the AFS_VNODE_CB_PROMISED flag)
and whether to cache the permit data included in the YFSFetchStatus record
by the server.


The problem comes when the server sends us a CB.InitCallBackState op.  The
first such instance doesn't cause cb_s_break to be incremented, but rather
causes AFS_SERVER_FL_NEW to be cleared - but thereafter, say some hours
after last use and all the volumes have been automatically unmounted and
the server has forgotten about the client[*], this *will* likely cause an
increment.

 [*] There are other circumstances too, such as the server restarting or
     needing to make space in its callback table.

Note that the server won't send us a CB.InitCallBackState op until we talk
to it again.

So what happens is:

 (1) A mount for a new volume is attempted, a inode is created for the root
     vnode and vnode->cb_s_break and AFS_VNODE_CB_PROMISED aren't set
     immediately, as we don't have a nominated server to talk to yet - and
     we may iterate through a few to find one.

 (2) Before the operation happens, afs_fetch_status(), say, notes in the
     cursor (fc.cb_break) the break counter sum from the vnode, volume and
     server counters, but the server->cb_s_break is currently 0.

 (3) We send FS.FetchStatus to the server.  The server sends us back
     CB.InitCallBackState.  We increment server->cb_s_break.

 (4) Our FS.FetchStatus completes.  The reply includes a callback record.

 (5) xdr_decode_AFSCallBack()/xdr_decode_YFSCallBack() check to see whether
     the callback promise was broken by checking the break counter sum from
     step (2) against the current sum.

     This fails because of step (3), so we don't set the callback record
     and, importantly, don't set AFS_VNODE_CB_PROMISED on the vnode.

This does not preclude the syscall from progressing, and we don't loop here
rechecking the status, but rather assume it's good enough for one round
only and will need to be rechecked next time.

 (6) afs_validate() it triggered on the vnode, probably called from
     d_revalidate() checking the parent directory.

 (7) afs_validate() notes that AFS_VNODE_CB_PROMISED isn't set, so doesn't
     update vnode->cb_s_break and assumes the vnode to be invalid.

 (8) afs_validate() needs to calls afs_fetch_status().  Go back to step (2)
     and repeat, every time the vnode is validated.

This primarily affects volume root dir vnodes.  Everything subsequent to
those inherit an already incremented cb_s_break upon mounting.


The issue is that we assume that the callback record and the cached permit
information in a reply from the server can't be trusted after getting a
server break - but this is wrong since the server makes sure things are
done in the right order, holding up our ops if necessary[*].

 [*] There is an extremely unlikely scenario where a reply from before the
     CB.InitCallBackState could get its delivery deferred till after - at
     which point we think we have a promise when we don't.  This, however,
     requires unlucky mass packet loss to one call.

AFS_SERVER_FL_NEW tries to paper over the cracks for the initial mount from
a server we've never contacted before, but this should be unnecessary.
It's also further insulated from the problem on an initial mount by
querying the server first with FS.GetCapabilities, which triggers the
CB.InitCallBackState.


Fix this by

 (1) Remove AFS_SERVER_FL_NEW.

 (2) In afs_calc_vnode_cb_break(), don't include cb_s_break in the
     calculation.

 (3) In afs_cb_is_broken(), don't include cb_s_break in the check.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
      eeba1e9c
    • M
      afs: Unlock pages for __pagevec_release() · 21bd68f1
      由 Marc Dionne 提交于 
      __pagevec_release() complains loudly if any page in the vector is still
locked.  The pages need to be locked for generic_error_remove_page(), but
that function doesn't actually unlock them.

Unlock the pages afterwards.
Signed-off-by: NMarc Dionne <marc.dionne@auristor.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Tested-by: NJonathan Billings <jsbillin@umich.edu>
      21bd68f1
    • D
      afs: Differentiate abort due to unmarshalling from other errors · 8022c4b9
      由 David Howells 提交于 
      Differentiate an abort due to an unmarshalling error from an abort due to
other errors, such as ENETUNREACH.  It doesn't make sense to set abort code
RXGEN_*_UNMARSHAL in such a case, so use RX_USER_ABORT instead.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
      8022c4b9
    • A
      afs: Avoid section confusion in CM_NAME · d2abfa86
      由 Andi Kleen 提交于 
      __tracepoint_str cannot be const because the tracepoint_str
section is not read-only. Remove the stray const.

Cc: dhowells@redhat.com
Cc: viro@zeniv.linux.org.uk
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
      d2abfa86
    • A
      afs: avoid deprecated get_seconds() · ba25b81e
      由 Arnd Bergmann 提交于 
      get_seconds() has a limited range on 32-bit architectures and is
deprecated because of that. While AFS uses the same limits for
its inode timestamps on the wire protocol, let's just use the
simpler current_time() as we do for other file systems.

This will still zero out the 'tv_nsec' field of the timestamps
internally.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
      ba25b81e
    • M
      afs: Check for rxrpc call completion in wait loop · f7f1dd31
      由 Marc Dionne 提交于 
      Check the state of the rxrpc call backing an afs call in each iteration of
the call wait loop in case the rxrpc call has already been terminated at
the rxrpc layer.

Interrupt the wait loop and mark the afs call as complete if the rxrpc
layer call is complete.

There were cases where rxrpc errors were not passed up to afs, which could
result in this loop waiting forever for an afs call to transition to
AFS_CALL_COMPLETE while the rx call was already complete.
Signed-off-by: NMarc Dionne <marc.dionne@auristor.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      f7f1dd31
    • M
      rxrpc: Make rxrpc_kernel_check_life() indicate if call completed · 4611da30
      由 Marc Dionne 提交于 
      Make rxrpc_kernel_check_life() pass back the life counter through the
argument list and return true if the call has not yet completed.
Suggested-by: NMarc Dionne <marc.dionne@auristor.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      4611da30
  17. 12 4月, 2019 4 次提交
  19. 09 4月, 2019 2 次提交
    • J
      io_uring: restrict IORING_SETUP_SQPOLL to root · 3ec482d1
      由 Jens Axboe 提交于 
      This options spawns a kernel side thread that will poll for submissions
(and completions, if IORING_SETUP_IOPOLL is set). As this allows a user
to potentially use more cycles outside of the normal hierarchy,
restrict the use of this feature to root.
Signed-off-by: NJens Axboe <axboe@kernel.dk>
      3ec482d1
    • T
      nfsd: Don't release the callback slot unless it was actually held · e6abc8ca
      由 Trond Myklebust 提交于 
      If there are multiple callbacks queued, waiting for the callback
slot when the callback gets shut down, then they all currently
end up acting as if they hold the slot, and call
nfsd4_cb_sequence_done() resulting in interesting side-effects.

In addition, the 'retry_nowait' path in nfsd4_cb_sequence_done()
causes a loop back to nfsd4_cb_prepare() without first freeing the
slot, which causes a deadlock when nfsd41_cb_get_slot() gets called
a second time.

This patch therefore adds a boolean to track whether or not the
callback did pick up the slot, so that it can do the right thing
in these 2 cases.

Cc: stable@vger.kernel.org
Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
      e6abc8ca
  21. 07 4月, 2019 1 次提交
    • K
      fs: stream_open - opener for stream-like files so that read and write can run... · 10dce8af
      由 Kirill Smelkov 提交于 
      fs: stream_open - opener for stream-like files so that read and write can run simultaneously without deadlock

Commit 9c225f26 ("vfs: atomic f_pos accesses as per POSIX") added
locking for file.f_pos access and in particular made concurrent read and
write not possible - now both those functions take f_pos lock for the
whole run, and so if e.g. a read is blocked waiting for data, write will
deadlock waiting for that read to complete.

This caused regression for stream-like files where previously read and
write could run simultaneously, but after that patch could not do so
anymore. See e.g. commit 581d21a2 ("xenbus: fix deadlock on writes
to /proc/xen/xenbus") which fixes such regression for particular case of
/proc/xen/xenbus.

The patch that added f_pos lock in 2014 did so to guarantee POSIX thread
safety for read/write/lseek and added the locking to file descriptors of
all regular files. In 2014 that thread-safety problem was not new as it
was already discussed earlier in 2006.

However even though 2006'th version of Linus's patch was adding f_pos
locking "only for files that are marked seekable with FMODE_LSEEK (thus
avoiding the stream-like objects like pipes and sockets)", the 2014
version - the one that actually made it into the tree as 9c225f26 -
is doing so irregardless of whether a file is seekable or not.

See

    https://lore.kernel.org/lkml/53022DB1.4070805@gmail.com/
    https://lwn.net/Articles/180387
    https://lwn.net/Articles/180396

for historic context.

The reason that it did so is, probably, that there are many files that
are marked non-seekable, but e.g. their read implementation actually
depends on knowing current position to correctly handle the read. Some
examples:

	kernel/power/user.c		snapshot_read
	fs/debugfs/file.c		u32_array_read
	fs/fuse/control.c		fuse_conn_waiting_read + ...
	drivers/hwmon/asus_atk0110.c	atk_debugfs_ggrp_read
	arch/s390/hypfs/inode.c		hypfs_read_iter
	...

Despite that, many nonseekable_open users implement read and write with
pure stream semantics - they don't depend on passed ppos at all. And for
those cases where read could wait for something inside, it creates a
situation similar to xenbus - the write could be never made to go until
read is done, and read is waiting for some, potentially external, event,
for potentially unbounded time -> deadlock.

Besides xenbus, there are 14 such places in the kernel that I've found
with semantic patch (see below):

	drivers/xen/evtchn.c:667:8-24: ERROR: evtchn_fops: .read() can deadlock .write()
	drivers/isdn/capi/capi.c:963:8-24: ERROR: capi_fops: .read() can deadlock .write()
	drivers/input/evdev.c:527:1-17: ERROR: evdev_fops: .read() can deadlock .write()
	drivers/char/pcmcia/cm4000_cs.c:1685:7-23: ERROR: cm4000_fops: .read() can deadlock .write()
	net/rfkill/core.c:1146:8-24: ERROR: rfkill_fops: .read() can deadlock .write()
	drivers/s390/char/fs3270.c:488:1-17: ERROR: fs3270_fops: .read() can deadlock .write()
	drivers/usb/misc/ldusb.c:310:1-17: ERROR: ld_usb_fops: .read() can deadlock .write()
	drivers/hid/uhid.c:635:1-17: ERROR: uhid_fops: .read() can deadlock .write()
	net/batman-adv/icmp_socket.c:80:1-17: ERROR: batadv_fops: .read() can deadlock .write()
	drivers/media/rc/lirc_dev.c:198:1-17: ERROR: lirc_fops: .read() can deadlock .write()
	drivers/leds/uleds.c:77:1-17: ERROR: uleds_fops: .read() can deadlock .write()
	drivers/input/misc/uinput.c:400:1-17: ERROR: uinput_fops: .read() can deadlock .write()
	drivers/infiniband/core/user_mad.c:985:7-23: ERROR: umad_fops: .read() can deadlock .write()
	drivers/gnss/core.c:45:1-17: ERROR: gnss_fops: .read() can deadlock .write()

In addition to the cases above another regression caused by f_pos
locking is that now FUSE filesystems that implement open with
FOPEN_NONSEEKABLE flag, can no longer implement bidirectional
stream-like files - for the same reason as above e.g. read can deadlock
write locking on file.f_pos in the kernel.

FUSE's FOPEN_NONSEEKABLE was added in 2008 in a7c1b990 ("fuse:
implement nonseekable open") to support OSSPD. OSSPD implements /dev/dsp
in userspace with FOPEN_NONSEEKABLE flag, with corresponding read and
write routines not depending on current position at all, and with both
read and write being potentially blocking operations:

See

    https://github.com/libfuse/osspd
    https://lwn.net/Articles/308445

    https://github.com/libfuse/osspd/blob/14a9cff0/osspd.c#L1406
    https://github.com/libfuse/osspd/blob/14a9cff0/osspd.c#L1438-L1477
    https://github.com/libfuse/osspd/blob/14a9cff0/osspd.c#L1479-L1510

Corresponding libfuse example/test also describes FOPEN_NONSEEKABLE as
"somewhat pipe-like files ..." with read handler not using offset.
However that test implements only read without write and cannot exercise
the deadlock scenario:

    https://github.com/libfuse/libfuse/blob/fuse-3.4.2-3-ga1bff7d/example/poll.c#L124-L131
    https://github.com/libfuse/libfuse/blob/fuse-3.4.2-3-ga1bff7d/example/poll.c#L146-L163
    https://github.com/libfuse/libfuse/blob/fuse-3.4.2-3-ga1bff7d/example/poll.c#L209-L216

I've actually hit the read vs write deadlock for real while implementing
my FUSE filesystem where there is /head/watch file, for which open
creates separate bidirectional socket-like stream in between filesystem
and its user with both read and write being later performed
simultaneously. And there it is semantically not easy to split the
stream into two separate read-only and write-only channels:

    https://lab.nexedi.com/kirr/wendelin.core/blob/f13aa600/wcfs/wcfs.go#L88-169

Let's fix this regression. The plan is:

1. We can't change nonseekable_open to include &~FMODE_ATOMIC_POS -
   doing so would break many in-kernel nonseekable_open users which
   actually use ppos in read/write handlers.

2. Add stream_open() to kernel to open stream-like non-seekable file
   descriptors. Read and write on such file descriptors would never use
   nor change ppos. And with that property on stream-like files read and
   write will be running without taking f_pos lock - i.e. read and write
   could be running simultaneously.

3. With semantic patch search and convert to stream_open all in-kernel
   nonseekable_open users for which read and write actually do not
   depend on ppos and where there is no other methods in file_operations
   which assume @offset access.

4. Add FOPEN_STREAM to fs/fuse/ and open in-kernel file-descriptors via
   steam_open if that bit is present in filesystem open reply.

   It was tempting to change fs/fuse/ open handler to use stream_open
   instead of nonseekable_open on just FOPEN_NONSEEKABLE flags, but
   grepping through Debian codesearch shows users of FOPEN_NONSEEKABLE,
   and in particular GVFS which actually uses offset in its read and
   write handlers

	https://codesearch.debian.net/search?q=-%3Enonseekable+%3D
	https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1080
	https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1247-1346
	https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1399-1481

   so if we would do such a change it will break a real user.

5. Add stream_open and FOPEN_STREAM handling to stable kernels starting
   from v3.14+ (the kernel where 9c225f26 first appeared).

   This will allow to patch OSSPD and other FUSE filesystems that
   provide stream-like files to return FOPEN_STREAM | FOPEN_NONSEEKABLE
   in their open handler and this way avoid the deadlock on all kernel
   versions. This should work because fs/fuse/ ignores unknown open
   flags returned from a filesystem and so passing FOPEN_STREAM to a
   kernel that is not aware of this flag cannot hurt. In turn the kernel
   that is not aware of FOPEN_STREAM will be < v3.14 where just
   FOPEN_NONSEEKABLE is sufficient to implement streams without read vs
   write deadlock.

This patch adds stream_open, converts /proc/xen/xenbus to it and adds
semantic patch to automatically locate in-kernel places that are either
required to be converted due to read vs write deadlock, or that are just
safe to be converted because read and write do not use ppos and there
are no other funky methods in file_operations.

Regarding semantic patch I've verified each generated change manually -
that it is correct to convert - and each other nonseekable_open instance
left - that it is either not correct to convert there, or that it is not
converted due to current stream_open.cocci limitations.

The script also does not convert files that should be valid to convert,
but that currently have .llseek = noop_llseek or generic_file_llseek for
unknown reason despite file being opened with nonseekable_open (e.g.
drivers/input/mousedev.c)

Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Yongzhi Pan <panyongzhi@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Tejun Heo <tj@kernel.org>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Nikolaus Rath <Nikolaus@rath.org>
Cc: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: NKirill Smelkov <kirr@nexedi.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      10dce8af
  23. 06 4月, 2019 2 次提交
  25. 05 4月, 2019 1 次提交
  27. 04 4月, 2019 4 次提交
  29. 03 4月, 2019 1 次提交
    • J
      io_uring: fix double free in case of fileset regitration failure · 25adf50f
      由 Jens Axboe 提交于 
      Will Deacon reported the following KASAN complaint:

[  149.890370] ==================================================================
[  149.891266] BUG: KASAN: double-free or invalid-free in io_sqe_files_unregister+0xa8/0x140
[  149.892218]
[  149.892411] CPU: 113 PID: 3974 Comm: io_uring_regist Tainted: G    B             5.1.0-rc3-00012-g40b114779944 #3
[  149.893623] Hardware name: linux,dummy-virt (DT)
[  149.894169] Call trace:
[  149.894539]  dump_backtrace+0x0/0x228
[  149.895172]  show_stack+0x14/0x20
[  149.895747]  dump_stack+0xe8/0x124
[  149.896335]  print_address_description+0x60/0x258
[  149.897148]  kasan_report_invalid_free+0x78/0xb8
[  149.897936]  __kasan_slab_free+0x1fc/0x228
[  149.898641]  kasan_slab_free+0x10/0x18
[  149.899283]  kfree+0x70/0x1f8
[  149.899798]  io_sqe_files_unregister+0xa8/0x140
[  149.900574]  io_ring_ctx_wait_and_kill+0x190/0x3c0
[  149.901402]  io_uring_release+0x2c/0x48
[  149.902068]  __fput+0x18c/0x510
[  149.902612]  ____fput+0xc/0x18
[  149.903146]  task_work_run+0xf0/0x148
[  149.903778]  do_notify_resume+0x554/0x748
[  149.904467]  work_pending+0x8/0x10
[  149.905060]
[  149.905331] Allocated by task 3974:
[  149.905934]  __kasan_kmalloc.isra.0.part.1+0x48/0xf8
[  149.906786]  __kasan_kmalloc.isra.0+0xb8/0xd8
[  149.907531]  kasan_kmalloc+0xc/0x18
[  149.908134]  __kmalloc+0x168/0x248
[  149.908724]  __arm64_sys_io_uring_register+0x2b8/0x15a8
[  149.909622]  el0_svc_common+0x100/0x258
[  149.910281]  el0_svc_handler+0x48/0xc0
[  149.910928]  el0_svc+0x8/0xc
[  149.911425]
[  149.911696] Freed by task 3974:
[  149.912242]  __kasan_slab_free+0x114/0x228
[  149.912955]  kasan_slab_free+0x10/0x18
[  149.913602]  kfree+0x70/0x1f8
[  149.914118]  __arm64_sys_io_uring_register+0xc2c/0x15a8
[  149.915009]  el0_svc_common+0x100/0x258
[  149.915670]  el0_svc_handler+0x48/0xc0
[  149.916317]  el0_svc+0x8/0xc
[  149.916817]
[  149.917101] The buggy address belongs to the object at ffff8004ce07ed00
[  149.917101]  which belongs to the cache kmalloc-128 of size 128
[  149.919197] The buggy address is located 0 bytes inside of
[  149.919197]  128-byte region [ffff8004ce07ed00, ffff8004ce07ed80)
[  149.921142] The buggy address belongs to the page:
[  149.921953] page:ffff7e0013381f00 count:1 mapcount:0 mapping:ffff800503417c00 index:0x0 compound_mapcount: 0
[  149.923595] flags: 0x1ffff00000010200(slab|head)
[  149.924388] raw: 1ffff00000010200 dead000000000100 dead000000000200 ffff800503417c00
[  149.925706] raw: 0000000000000000 0000000080400040 00000001ffffffff 0000000000000000
[  149.927011] page dumped because: kasan: bad access detected
[  149.927956]
[  149.928224] Memory state around the buggy address:
[  149.929054]  ffff8004ce07ec00: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc
[  149.930274]  ffff8004ce07ec80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  149.931494] >ffff8004ce07ed00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  149.932712]                    ^
[  149.933281]  ffff8004ce07ed80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  149.934508]  ffff8004ce07ee00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  149.935725] ==================================================================

which is due to a failure in registrering a fileset. This frees the
ctx->user_files pointer, but doesn't clear it. When the io_uring
instance is later freed through the normal channels, we free this
pointer again. At this point it's invalid.

Ensure we clear the pointer when we free it for the error case.
Reported-by: NWill Deacon <will.deacon@arm.com>
Tested-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
      25adf50f
  31. 02 4月, 2019 1 次提交