Fix address space annotation correct in ioctl.c.
Signed-off-by: NDaniel J Blueman <daniel.blueman@gmail.com>

 		       BTRFS_BLOCK_GROUP_SYSTEM,
@@ -2387,7 +2387,7 @@ long btrfs_ioctl_space_info(struct btrfs_root
*root, void __user *arg)
 		up_read(&info->groups_sem);
 	}

-	user_dest = (struct btrfs_ioctl_space_info *)
+	user_dest = (struct btrfs_ioctl_space_info __user *)
 		(arg + sizeof(struct btrfs_ioctl_space_args));

 	if (copy_to_user(user_dest, dest_orig, alloc_size))
Reviewed-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

root_item->flags and root_item->byte_limit are not initialized when
a subvolume is created. This bug is not revealed until we added
readonly snapshot support - now you mount a btrfs filesystem and you
may find the subvolumes in it are readonly.

To work around this problem, we steal a bit from root_item->inode_item->flags,
and use it to indicate if those fields have been properly initialized.
When we read a tree root from disk, we check if the bit is set, and if
not we'll set the flag and initialize the two fields of the root item.
Reported-by: NAndreas Philipp <philipp.andreas@gmail.com>
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Tested-by: NAndreas Philipp <philipp.andreas@gmail.com>
cc: stable@kernel.org
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Call btrfs_end_transaction() if btrfs_commit_transaction_async() fails.
Signed-off-by: NTsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

setflags ioctl should return error when any checks fail.
Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com>
Reviewed-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

We take an free extent out from allocator, trim it, then put it back,
but before we trim the block group, we should make sure the block group is
cached, so plus a little change to make cache_block_group() run without a
transaction.
Signed-off-by: NLi Dongyang <lidongyang@novell.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Data compression and data cow are controlled across the entire FS by mount
options right now.  ioctls are needed to set this on a per file or per
directory basis.  This has been proposed previously, but VFS developers
wanted us to use generic ioctls rather than btrfs-specific ones.

According to Chris's comment, there should be just one true compression
method(probably LZO) stored in the super.  However, before this, we would
wait for that one method is stable enough to be adopted into the super.
So I list it as a long term goal, and just store it in ram today.

After applying this patch, we can use the generic "FS_IOC_SETFLAGS" ioctl to
control file and directory's datacow and compression attribute.

NOTE:
 - The compression type is selected by such rules:
   If we mount btrfs with compress options, ie, zlib/lzo, the type is it.
   Otherwise, we'll use the default compress type (zlib today).

v1->v2:
- rebase to the latest btrfs.
v2->v3:
- fix a problem, i.e. when a file is set NOCOW via mount option, then this NOCOW
  will be screwed by inheritance from parent directory.
Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This patch changes some BUG_ON() to the error return.
(but, most callers still use BUG_ON())
Signed-off-by: NTsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

If we cannot truncate an inode for some reason we will never delete the orphan
item associated with that inode, which means that we will loop forever in
btrfs_orphan_cleanup.  Instead of doing this just return error so we fail to
mount.  It sucks, but hey it's better than hanging.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>

- Check user-specified flags correctly
- Check the inode owership
- Search root item in root tree but not fs tree
Reported-by: NDan Rosenberg <drosenberg@vsecurity.com>
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Commit bf5fc093 refactored
btrfs_ioctl_space_info() and introduced several security issues.

space_args.space_slots is an unsigned 64-bit type controlled by a
possibly unprivileged caller.  The comparison as a signed int type
allows providing values that are treated as negative and cause the
subsequent allocation size calculation to wrap, or be truncated to 0.
By providing a size that's truncated to 0, kmalloc() will return
ZERO_SIZE_PTR.  It's also possible to provide a value smaller than the
slot count.  The subsequent loop ignores the allocation size when
copying data in, resulting in a heap overflow or write to ZERO_SIZE_PTR.

The fix changes the slot count type and comparison typecast to u64,
which prevents truncation or signedness errors, and also ensures that we
don't copy more data than we've allocated in the subsequent loop.  Note
that zero-size allocations are no longer possible since there is already
an explicit check for space_args.space_slots being 0 and truncation of
this value is no longer an issue.
Signed-off-by: NDan Rosenberg <drosenberg@vsecurity.com>
Signed-off-by: NJosef Bacik <josef@redhat.com>
Reviewed-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

The error check of btrfs_start_transaction() is added, and the mistake
of the error check on several places is corrected.
Signed-off-by: NTsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

btrfs_start_ioctl_transaction() returns ERR_PTR(), not NULL.
So, it is necessary to use IS_ERR() to check the return value.
Signed-off-by: NTsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

The error check of btrfs_join_transaction()/btrfs_join_transaction_nolock()
is added, and the mistake of the error check in several places is
corrected.

For more stable Btrfs, I think that we should reduce BUG_ON().
But, I think that long time is necessary for this.
So, I propose this patch as a short-term solution.

With this patch:
 - To more stable Btrfs, the part that should be corrected is clarified.
 - The panic isn't done by the NULL pointer reference etc. (even if
   BUG_ON() is increased temporarily)
 - The error code is returned in the place where the error can be easily
   returned.

As a long-term plan:
 - BUG_ON() is reduced by using the forced-readonly framework, etc.
Signed-off-by: NTsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Suppose:
- the source extent is: [0, 100]
- the src offset is 10
- the clone length is 90
- the dest offset is 0

This statement:

	new_key.offset = key.offset + destoff - off

will produce such an extent for the dest file:

	[ino, BTRFS_EXTENT_DATA_KEY, -10]

, which is obviously wrong.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>

This allows us to set a snapshot or a subvolume readonly or writable
on the fly.

Usage:

Set BTRFS_SUBVOL_RDONLY of btrfs_ioctl_vol_arg_v2->flags, and then
call ioctl(BTRFS_IOCTL_SUBVOL_SETFLAGS);

Changelog for v3:

- Change to pass __u64 as ioctl parameter.

Changelog for v2:

- Add _GETFLAGS ioctl.
- Check if the passed fd is the root of a subvolume.
- Change the name from _SNAP_SETFLAGS to _SUBVOL_SETFLAGS.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>

Usage:

Set BTRFS_SUBVOL_RDONLY of btrfs_ioctl_vol_arg_v2->flags, and call
ioctl(BTRFS_I0CTL_SNAP_CREATE_V2).

Implementation:

- Set readonly bit of btrfs_root_item->flags.
- Add readonly checks in btrfs_permission (inode_permission),
btrfs_setattr, btrfs_set/remove_xattr and some ioctls.

Changelog for v3:

- Eliminate btrfs_root->readonly, but check btrfs_root->root_item.flags.
- Rename BTRFS_ROOT_SNAP_RDONLY to BTRFS_ROOT_SUBVOL_RDONLY.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>

Split it into two functions for two different ioctls, since they
share no common code.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>

Update defrag ioctl, so one can choose lzo or zlib when turning
on compression in defrag operation.

Changelog:

v1 -> v2
- Add incompability flag.
- Fix to check invalid compress type.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>

Make the code aware of compression type, instead of always assuming
zlib compression.

Also make the zlib workspace function as common code for all
compression types.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>

If we had reserved some bytes in struct btrfs_ioctl_vol_args, we
wouldn't have to create a new structure for async snapshot creation.

Here we convert async snapshot ioctl to use a more generic ABI, as
we'll add more ioctls for snapshots/subvolumes in the future, readonly
snapshots for example.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

We were incorrectly taking the async path even for the sync ioctls by
passing in &transid unconditionally.

There's ample room for further cleanup here, but this keeps the fix simple.
Signed-off-by: NSage Weil <sage@newdream.net>
Reviewed-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

There are lots of places where we do dentry->d_parent->d_inode without holding
the dentry->d_lock.  This could cause problems with rename.  So instead we need
to use dget_parent() and hold the reference to the parent as long as we are
going to use it's inode and then dput it at the end.
Signed-off-by: NJosef Bacik <josef@redhat.com>
Cc: raven@themaw.net
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Set src_offset = 0, src_length = 20K, dest_offset = 20K. And the
original filesize of the dest file 'file2' is 30K:

  # ls -l /mnt/file2
  -rw-r--r-- 1 root root 30720 Nov 18 16:42 /mnt/file2

Now clone file1 to file2, the dest file should be 40K, but it
still shows 30K:

  # ls -l /mnt/file2
  -rw-r--r-- 1 root root 30720 Nov 18 16:42 /mnt/file2
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

We've done the check for src_offset and src_length, and We should
also check dest_offset, otherwise we'll corrupt the destination
file:

  (After cloning file1 to file2 with unaligned dest_offset)
  # cat /mnt/file2
  cat: /mnt/file2: Input/output error
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Add a mount option user_subvol_rm_allowed that allows users to delete a
(potentially non-empty!) subvol when they would otherwise we allowed to do
an rmdir(2).  We duplicate the may_delete() checks from the core VFS code
to implement identical security checks (minus the directory size check).
We additionally require that the user has write+exec permission on the
subvol root inode.
Signed-off-by: NSage Weil <sage@newdream.net>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

There is no reason to force an immediate commit when deleting a snapshot.
Users have some expectation that space from a deleted snapshot be freed
immediately, but even if we do commit the reclaim is a background process.

If users _do_ want the deletion to be durable, they can call 'sync'.
Signed-off-by: NSage Weil <sage@newdream.net>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Create a snap without waiting for it to commit to disk.  The ioctl is
ordered such that subsequent operations will not be contained by the
created snapshot, and the commit is initiated, but the ioctl does not
wait for the snapshot to commit to disk.

We return the specific transid to userspace so that an application can wait
for this specific snapshot creation to commit via the WAIT_SYNC ioctl.
Signed-off-by: NSage Weil <sage@newdream.net>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

START_SYNC will start a sync/commit, but not wait for it to
complete.  Any modification started after the ioctl returns is
guaranteed not to be included in the commit.  If a non-NULL
pointer is passed, the transaction id will be returned to
userspace.

WAIT_SYNC will wait for any in-progress commit to complete.  If a
transaction id is specified, the ioctl will block and then
return (success) when the specified transaction has committed.
If it has already committed when we call the ioctl, it returns
immediately.  If the specified transaction doesn't exist, it
returns EINVAL.

If no transaction id is specified, WAIT_SYNC will wait for the
currently committing transaction to finish it's commit to disk.
If there is no currently committing transaction, it returns
success.

These ioctls are useful for applications which want to impose an
ordering on when fs modifications reach disk, but do not want to
wait for the full (slow) commit process to do so.

Picky callers can take the transid returned by START_SYNC and
feed it to WAIT_SYNC, and be certain to wait only as long as
necessary for the transaction _they_ started to reach disk.

Sloppy callers can START_SYNC and WAIT_SYNC without a transid,
and provided they didn't wait too long between the calls, they
will get the same result.  However, if a second commit starts
before they call WAIT_SYNC, they may end up waiting longer for
it to commit as well.  Even so, a START_SYNC+WAIT_SYNC still
guarantees that any operation completed before the START_SYNC
reaches disk.
Signed-off-by: NSage Weil <sage@newdream.net>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

I'm no lockdep expert, but this appears to make the lockdep warning go
away for the i_mutex locking in the clone ioctl.
Signed-off-by: NSage Weil <sage@newdream.net>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

We had an edge case issue where the requested range was just
following an existing extent. Instead of skipping to the next
extent, we used the previous one which lead to having zero
sized extents.
Signed-off-by: NYehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

The lookup_first_ordered_extent() was done on the wrong inode, and the
->delalloc_bytes test was wrong, as the following
btrfs_wait_ordered_range() would only invoke a range write and wouldn't
write the entire file data range. Also, a bad parameter was passed to
btrfs_wait_ordered_range().
Signed-off-by: NYehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

These are all the cases where a variable is set, but not read which are
not bugs as far as I can see, but simply leftovers.

Still needs more review.

Found by gcc 4.6's new warnings
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Cc: Chris Mason <chris.mason@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Use memdup_user when user data is immediately copied into the
allocated region.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression from,to,size,flag;
position p;
identifier l1,l2;
@@

-  to = \(kmalloc@p\|kzalloc@p\)(size,flag);
+  to = memdup_user(from,size);
   if (
-      to==NULL
+      IS_ERR(to)
                 || ...) {
   <+... when != goto l1;
-  -ENOMEM
+  PTR_ERR(to)
   ...+>
   }
-  if (copy_from_user(to, from, size) != 0) {
-    <+... when != goto l2;
-    -EFAULT
-    ...+>
-  }
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Cc: Chris Mason <chris.mason@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

The new ENOSPC stuff broke the df ioctl since we no longer create seperate space
info's for each RAID type.  So instead, loop through each space info's raid
lists so we can get the right RAID information which will allow the df ioctl to
tell us RAID types again.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>

1.  The BTRFS_IOC_CLONE and BTRFS_IOC_CLONE_RANGE ioctls should check
whether the donor file is append-only before writing to it.

2.  The BTRFS_IOC_CLONE_RANGE ioctl appears to have an integer
overflow that allows a user to specify an out-of-bounds range to copy
from the source file (if off + len wraps around).  I haven't been able
to successfully exploit this, but I'd imagine that a clever attacker
could use this to read things he shouldn't.  Even if it's not
exploitable, it couldn't hurt to be safe.
Signed-off-by: NDan Rosenberg <dan.j.rosenberg@gmail.com>
cc: stable@kernel.org
Signed-off-by: NChris Mason <chris.mason@oracle.com>

The CLONE and CLONE_RANGE ioctls round up the range of extents being
cloned to the block size when the range to clone extends to the end of file
(this is always the case with CLONE).  It was then using that offset when
extending the destination file's i_size.  Fix this by not setting i_size
beyond the originally requested ending offset.

This bug was introduced by a22285a6 (2.6.35-rc1).
Signed-off-by: NSage Weil <sage@newdream.net>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

btrfs_lookup_dir_item() can return either ERR_PTRs or null.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This was added by a22285a6: "Btrfs: Integrate metadata reservation
with start_transaction".  If we goto out here then we skip all the
unwinding and there are locks still held etc.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

reserve metadata space for handling orphan inodes
Signed-off-by: NYan Zheng <zheng.yan@oracle.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Reserve metadata space for extent tree, checksum tree and root tree
Signed-off-by: NYan Zheng <zheng.yan@oracle.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>