Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAnthony Koo <Anthony.Koo@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
HPD disable and enable sequences are not mutually exclusive on Linux.
For HPDs that spans under 1s (i.e. HPD low = 1s), part of the disable
sequence (specifically, a request to SMU to lower refclk) could come
right before the call to PHY enablement, causing DMUB to access an
irresponsive PHY and thus a hard hang on the system.

[How]
Disable 48mhz refclk off when there is any HPD status in connected state
for dcn20.
Reviewed-by: NHersen Wu <hersenxs.wu@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NQingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why & How]
With Werror enabled in the kernel we were failing the clang build since
dml21_ModeSupportAndSystemConfigurationFull's stack frame is 1064 when
building with clang, and exceeding the default 1024 stack frame limit.

The culprit seems to be the Pipe struct, so pull the relevant block
out into its own sub-function.
Signed-off-by: NHarry Wentland <harry.wentland@amd.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why & How]
dcn_bw_calc_rq_dlg_ttu uses a stack frame great than 1024. To solve this
we could allocate the rq_param, dlg_sys_param, and input structs
dynamically. Since this function is inside a kernel_fpu_begin()/end()
call we want to avoid memory allocation. Instead it's much
safer to pre-allocate these on the pipe_ctx.
Signed-off-by: NHarry Wentland <harry.wentland@amd.com>
Fixes: 3fe617cc ("Enable '-Werror' by default for all kernel builds")
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Xinhui Pan <Xinhui.Pan@amd.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: llvm@lists.linux.dev
Acked-by: NChristian König <christian.koenig@amd.com>
Build-tested-by: NNathan Chancellor <nathan@kernel.org>
Reviewed-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Passing structs adds a lot of overhead. We don't ever want to pass
anything bigger than primitives by value.

This patch fixes these Coverity IDs:
Addresses-Coverity-ID: 1424031: ("Big parameter passed by value")
Addresses-Coverity-ID: 1424055: ("Big parameter passed by value")
Addresses-Coverity-ID: 1424072: ("Big parameter passed by value")
Addresses-Coverity-ID: 1423779: ("Big parameter passed by value")
Signed-off-by: NHarry Wentland <harry.wentland@amd.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Xinhui Pan <Xinhui.Pan@amd.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: llvm@lists.linux.dev
Acked-by: NChristian König <christian.koenig@amd.com>
Build-tested-by: NNathan Chancellor <nathan@kernel.org>
Reviewed-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Passing structs adds a lot of overhead. We don't ever want to pass
anything bigger than primitives by value.

This patch fixes these Coverity IDs:
Addresses-Coverity-ID: 1423868: ("Big parameter passed by value")
Addresses-Coverity-ID: 1423870: ("Big parameter passed by value")
Signed-off-by: NHarry Wentland <harry.wentland@amd.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Xinhui Pan <Xinhui.Pan@amd.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: llvm@lists.linux.dev
Acked-by: NChristian König <christian.koenig@amd.com>
Build-tested-by: NNathan Chancellor <nathan@kernel.org>
Reviewed-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
This neither needs to be on the stack nor passed by value
to each function call. In fact, when building with clang
it seems to break the Linux's default 1024 byte stack
frame limit.

[How]
We can simply pass this as a const pointer.

This patch fixes these Coverity IDs
Addresses-Coverity-ID: 1424031: ("Big parameter passed by value")
Addresses-Coverity-ID: 1423970: ("Big parameter passed by value")
Addresses-Coverity-ID: 1423941: ("Big parameter passed by value")
Addresses-Coverity-ID: 1451742: ("Big parameter passed by value")
Addresses-Coverity-ID: 1451887: ("Big parameter passed by value")
Addresses-Coverity-ID: 1454146: ("Big parameter passed by value")
Addresses-Coverity-ID: 1454152: ("Big parameter passed by value")
Addresses-Coverity-ID: 1454413: ("Big parameter passed by value")
Addresses-Coverity-ID: 1466144: ("Big parameter passed by value")
Addresses-Coverity-ID: 1487237: ("Big parameter passed by value")
Signed-off-by: NHarry Wentland <harry.wentland@amd.com>
Fixes: 3fe617cc ("Enable '-Werror' by default for all kernel builds")
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Xinhui Pan <Xinhui.Pan@amd.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: llvm@lists.linux.dev
Acked-by: NChristian König <christian.koenig@amd.com>
Build-tested-by: NNathan Chancellor <nathan@kernel.org>
Reviewed-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For xnack off, restore work dma unmap previous system memory page, and
dma map the updated system memory page to update GPU mapping, this is
not dma mapping leaking, remove the WARN_ONCE for dma mapping leaking.

prange->dma_addr store the VRAM page pfn after the range migrated to
VRAM, should not dma unmap VRAM page when updating GPU mapping or
remove prange. Add helper svm_is_valid_dma_mapping_addr to check VRAM
page and error cases.

Mask out SVM_RANGE_VRAM_DOMAIN flag in dma_addr before calling amdgpu vm
update to avoid BUG_ON(*addr & 0xFFFF00000000003FULL), and set it again
immediately after. This flag is used to know the type of page later to
dma unmapping system memory page.

Fixes: 1d5dbfe6 ("drm/amdkfd: classify and map mixed svm range pages in GPU")
Signed-off-by: NPhilip Yang <Philip.Yang@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

SVM range may includes multiple VMAs with different vm_flags, if prange
page index is the last page of the VMA offset + npages, update GPU
mapping to create GPU page table with same VMA access permission.
Signed-off-by: NPhilip Yang <Philip.Yang@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fix the path to cover both the older powerplay infrastructure
and the newer SwSMU infrastructure.
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Using an empty macro expansion as a conditional expression
produces a W=1 warning:

drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.c: In function 'dce_aux_transfer_with_retries':
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.c:775:156: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
  775 |                                                                 "dce_aux_transfer_with_retries: AUX_RET_SUCCESS: AUX_TRANSACTION_REPLY_I2C_OVER_AUX_DEFER");
      |                                                                                                                                                            ^
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.c:783:155: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
  783 |                                                                 "dce_aux_transfer_with_retries: AUX_RET_SUCCESS: AUX_TRANSACTION_REPLY_I2C_OVER_AUX_NACK");
      |                                                                                                                                                           ^

Expand it to "do { } while (0)" instead to make the expression
more robust and avoid the warning.

Fixes: 56aca230 ("drm/amd/display: Add AUX I2C tracing.")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Problem:
When device goes into suspend and unplugged during it
then all HW programming during resume fails leading
to a bad SW during pci remove handling which follows.
Because device is first resumed and only later removed
we cannot rely on drm_dev_enter/exit here.

Fix:
Use a flag we use for PCIe error recovery to avoid
accessing registres. This allows to successfully complete
pm resume sequence and finish pci remove.
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add more guards to MMIO access post device
unbind/unplug

Bug: https://bugs.archlinux.org/task/72092?project=1&order=dateopened&sort=desc&pagenum=1Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: NJames Zhu <James.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Crash:
BUG: unable to handle page fault for address: 00000000000010e1
RIP: 0010:vega10_power_gate_vce+0x26/0x50 [amdgpu]
Call Trace:
pp_set_powergating_by_smu+0x16a/0x2b0 [amdgpu]
amdgpu_dpm_set_powergating_by_smu+0x92/0xf0 [amdgpu]
amdgpu_dpm_enable_vce+0x2e/0xc0 [amdgpu]
vce_v4_0_hw_fini+0x95/0xa0 [amdgpu]
amdgpu_device_fini_hw+0x232/0x30d [amdgpu]
amdgpu_driver_unload_kms+0x5c/0x80 [amdgpu]
amdgpu_pci_remove+0x27/0x40 [amdgpu]
pci_device_remove+0x3e/0xb0
device_release_driver_internal+0x103/0x1d0
device_release_driver+0x12/0x20
pci_stop_bus_device+0x79/0xa0
pci_stop_and_remove_bus_device_locked+0x1b/0x30
remove_store+0x7b/0x90
dev_attr_store+0x17/0x30
sysfs_kf_write+0x4b/0x60
kernfs_fop_write_iter+0x151/0x1e0

Why:
VCE/UVD had dependency on SMC block for their suspend but
SMC block is the first to do HW fini due to some constraints

How:
Since the original patch was dealing with suspend issues
move the SMC block dependency back into suspend hooks as
was done in V1 of the original patches.
Keep flushing idle work both in suspend and HW fini seuqnces
since it's essential in both cases.

Fixes: 859e4659 ("drm/amdgpu: add missing cleanups for more ASICs on UVD/VCE suspend")
Fixes: bf756fb8 ("drm/amdgpu: add missing cleanups for Polaris12 UVD/VCE on suspend")
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Now we use same BO for create/destroy msg. So destroy will wait for the
fence returned from create to be signaled. The default timeout value in
destroy is 10ms which is too short.

Lets wait both fences with the specific timeout.
Signed-off-by: Nxinhui pan <xinhui.pan@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We hit soft hang while doing memory pressure test on one numa system.
After a qucik look, this is because kfd invalid/valid userptr memory
frequently with process_info lock hold.
Looks like update page table mapping use too much cpu time.

perf top says below,
75.81%  [kernel]       [k] __srcu_read_unlock
 6.19%  [amdgpu]       [k] amdgpu_gmc_set_pte_pde
 3.56%  [kernel]       [k] __srcu_read_lock
 2.20%  [amdgpu]       [k] amdgpu_vm_cpu_update
 2.20%  [kernel]       [k] __sg_page_iter_dma_next
 2.15%  [drm]          [k] drm_dev_enter
 1.70%  [drm]          [k] drm_prime_sg_to_dma_addr_array
 1.18%  [kernel]       [k] __sg_alloc_table_from_pages
 1.09%  [drm]          [k] drm_dev_exit

So move drm_dev_enter/exit outside gmc code, instead let caller do it.
They are gart_unbind, gart_map, vm_clear_bo, vm_update_pdes and
gmc_init_pdb0. vm_bo_update_mapping already calls it.
Signed-off-by: Nxinhui pan <xinhui.pan@amd.com>
Reviewed-and-tested-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Why:
DC core is being released from DM before it's referenced
from hpd_rx wq destruction code.

How: Move hpd_rx destruction before DC core destruction.
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Some games, ie. Doom Eternal, present from compute following compute
post-fx and would benefit from having DCC image stores available.

DCN on gfx10_3 doesn't need INDEPENDENT_128B_BLOCKS = 0 so we can expose
these modifiers capable of DCC image stores.
Signed-off-by: NJoshua Ashton <joshua@froggi.es>
Reviewed-by: NBas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Adds the missing logic to set the correct value of dcc_ind_blk for this tiling version.
Signed-off-by: NJoshua Ashton <joshua@froggi.es>
Reviewed-by: NBas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We don't need to do this workaround if we start setting this value when we fill the plane attributes.
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NJoshua Ashton <joshua@froggi.es>
Reviewed-by: NBas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Don't populate the read-only array encoded_lanes on the stack but instead it
static. Also makes the object code smaller by 97 bytes:

Before:
   text    data    bss     dec    hex filename
  38899    8064      0   46963   b773 ./drivers/gpu/drm/radeon/r600_dpm.o

After:
   text    data    bss     dec    hex filename
  38738    8128      0   46866   b712 ./drivers/gpu/drm/radeon/r600_dpm.o

(gcc version 11.2.0)
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Set correct RAS nBIF error query register offsets on aldebaran
Signed-off-by: NJohn Clements <john.clements@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Update PSP TA unload function to use PSP TA context as input argument.
Signed-off-by: NCandice Li <candice.li@amd.com>
Reviewed-by: NJohn Clements <john.clements@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Update asd_context structure and add asd_initialize function to
conform ASD header/loading to generic TA systems.
Signed-off-by: NCandice Li <candice.li@amd.com>
Reviewed-by: NJohn Clements <john.clements@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Was missing.
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
The "base_addr_is_mc_addr" field was added for dcn3.1 support but
pa_config was never updated to set it to false.

Uninitialized memory causes it to be set to true which results in
address mistranslation and white screen.

[How]
Use memset to ensure all fields are initialized to 0 by default.

Fixes: 64b1d0e8 ("drm/amd/display: Add DCN3.1 HWSEQ")
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Acked-by: NAaron Liu <aaron.liu@amd.com>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This patch allows panel orientation quirks from DRM core to be
used. They attach a DRM connector property "panel orientation"
which indicates in which direction the panel has been mounted.
Some machines have the internal screen mounted with a rotation.

Since the panel orientation quirks need the native mode from the
EDID, check for it in amdgpu_dm_connector_ddc_get_modes.
Signed-off-by: NSimon Ser <contact@emersion.fr>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

As the user cannot do anything about the unsupported Trusted Memory Zone
(TMZ) feature, do not warn about it, but make it informational, so
demote the log level from warning to info.
Signed-off-by: NPaul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This was unusual; normally, inline functions are declared static as
well, and defined in a header file if used by multiple compilation
units. The latter would be more involved in this case, so just drop
the inline declaration for now.

Fixes compile failure building for ppc64le on RHEL 8:

In file included from ../drivers/gpu/drm/amd/amdgpu/amdgpu_ras.h:32,
                 from ../drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:33:
../drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c: In function ‘amdgpu_ras_recovery_init’:
../drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.h:90:17: error: inlining failed in call
 to ‘always_inline’ ‘amdgpu_ras_eeprom_max_record_count’: function body not available
   90 | inline uint32_t amdgpu_ras_eeprom_max_record_count(void);
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:1985:34: note: called from here
 1985 |         max_eeprom_records_len = amdgpu_ras_eeprom_max_record_count();
      |                                  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Fixes: c84d4670 "drm/amdgpu: validate bad page threshold in ras(v3)"
Reviewed-by: NLyude Paul <lyude@redhat.com>
Signed-off-by: NMichel Dänzer <mdaenzer@redhat.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Pass drm dev directly as rdev->ddev gets initialized later on
at radeon_device_init().

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=214375Signed-off-by: NNirmoy Das <nirmoy.das@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Current RUNPM mechanism relies on PMFW to master the timing for BACO
in/exit. And that needs cooperation from sound driver for dstate
change notification for function 1(audio). Otherwise(on sound driver
missing), BACO cannot be kicked in correctly and hang will be observed
on RUNPM exit.

By switching back to legacy message way on sound driver missing,
we are able to fix the runpm hang observed for the scenario below:
amdgpu driver loaded -> runpm suspend kicked -> sound driver loaded
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reported-and-tested-by: NPierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: NLijo Lazar <lijo.lazar@amd.com>
Reviewed-by: NGuchun Chen <guchun.chen@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Direct IB submission should be exclusive. So use write lock.
Signed-off-by: Nxinhui pan <xinhui.pan@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

alloc extra msg from direct IB pool.
Signed-off-by: Nxinhui pan <xinhui.pan@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

alloc extra msg from direct IB pool.
Signed-off-by: Nxinhui pan <xinhui.pan@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

move BO allocation in sw_init.
Signed-off-by: Nxinhui pan <xinhui.pan@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Remove all TA binary structures and add the specific binary
structure in struct ta_context.
Signed-off-by: NCandice Li <candice.li@amd.com>
Reviewed-by: NJohn Clements <john.clements@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Separate iommu_resume from kfd_resume, and move it before
other amdgpu ip init/resume.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211277Signed-off-by: NJames Zhu <James.Zhu@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add amdgpu_amdkfd_resume_iommu for amdgpu.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211277Signed-off-by: NJames Zhu <James.Zhu@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Separate kfd_iommu_resume from kfd_resume for fine-tuning
of amdgpu device init/resume/reset/recovery sequence.

v2: squash in fix for !CONFIG_HSA_AMD

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211277Signed-off-by: NJames Zhu <James.Zhu@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The AtomicOp Requester Enable bit is reserved in VFs and the PF value applies to all
associated VFs. so guest driver can not directly enable the atomicOps for VF, it
depends on PF to enable it. In current design, amdgpu driver  will get the enabled
atomicOps bits through private pf2vf data
Signed-off-by: Nshaoyunl <shaoyun.liu@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>