parse_raid_params() compares variable "int value" with INT_MAX.

E.g. related Coverity report excerpt:
   CID 1364818 (#2 of 3): Operands don't affect result (CONSTANT_EXPRESSION_RESULT) [select issue]
1433                        if (value > INT_MAX) {

Fix by changing checks to avoid INT_MAX.

Whilst on it, avoid unnecessary checks against constants
and add check for sane recovery speed min/max.
Signed-off-by: NHeinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

Fixes the following sparse warning:

drivers/md/dm-verity-target.c:375:6: warning:
 symbol 'verity_for_io_block' was not declared. Should it be static?
Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

This allows platforms that are CPU/memory contrained to verify data
blocks only the first time they are read from the data device, rather
than every time.  As such, it provides a reduced level of security
because only offline tampering of the data device's content will be
detected, not online tampering.

Hash blocks are still verified each time they are read from the hash
device, since verification of hash blocks is less performance critical
than data blocks, and a hash block will not be verified any more after
all the data blocks it covers have been verified anyway.

This option introduces a bitset that is used to check if a block has
been validated before or not.  A block can be validated more than once
as there is no thread protection for the bitset.

These changes were developed and tested on entry-level Android Go
devices.
Signed-off-by: NPatrik Torstensson <totte@google.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

The bio structure consumes a substantial part of dm_buffer.  The bio
structure is only needed when doing I/O on the buffer, thus we don't
have to embed it in the buffer.

Allocate the bio structure only when doing I/O.

We don't need to create a bio_set because, in case of allocation
failure, dm-bufio falls back to using dm-io (which keeps its own
bio_set).
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

Support block sizes that are not a power-of-two (but they must be a
multiple of 512b).  As always, a slab cache is used for allocations.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

kmalloc padded to the next power of two, using a slab cache avoids this.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

Reorder fields in dm_buffer structure to improve packing and reduce
structure size.  The compiler allocates 32-bit integer for field 'enum
data_mode', so change it to unsigned char.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

The I/O buffer doesn't have to be aligned on block size granularity,
relax alignment to ARCH_KMALLOC_MINALIGN (required to allow DMA from
slab cache memory on some architectures).

Also, set SLAB_RECLAIM_ACCOUNT so that the memory allocated from the
cache is accounted as reclaimable and doesn't inflate the 'used' entry
in the free command.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

All slab allocators can merge duplicate caches.  So dm-bufio doesn't
need extra slab merging logic.  Instead it can just allocate one slab
cache per client and let the allocator merge them.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

dm-bufio keeps the dm_bufio_cache_names array that holds names of the
slab caches.

Since the commit db265eca ("mm/sl[aou]b: Move duping of slab name to
slab_common.c"), the kernel automatically duplicates the slab cache name
when creating the slab cache, so we no longer have to keep the name
allocated.

Remove the code that allocates the slab names and keeps them around.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

Move dm-bufio.h to include/linux/ so that external GPL'd DM target
modules can use it.

It is better to allow the use of dm-bufio than force external modules
to implement the equivalent buffered IO mechanism in some new way.  The
hope is this will encourage the use of dm-bufio; which will then make it
easier for a GPL'd external DM target module to be included upstream.

A couple dm-bufio EXPORT_SYMBOL exports have also been updated to use
EXPORT_SYMBOL_GPL.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

This comment was true when dm-bufio was written but, since 4.3, bios can
now have arbitrary size and the driver splits them.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

Set QUEUE_FLAG_SECERASE in DM device's queue_flags if a DM table's
data devices support secure erase.

Also, add support for secure erase to both the linear and striped
targets.
Signed-off-by: NDenis Semakin <d.semakin@omprussia.ru>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

Otherwise, these abnormal IOs would be sent to the DM target
regardless of whether the target advertised support for them.

Factor out __process_abnormal_io() from __split_and_process_non_flush()
so that discards, write same, etc may be conditionally processed.

Fixes: 978e51ba ("dm: optimize bio-based NVMe IO submission")
Cc: stable@vger.kernel.org # 4.16
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

Fix a race for "nosync" activations providing "aa.." device health
characters and "0/N" sync ratio rather than "AA..." and "N/N".  Occurs
when status for the raid set is retrieved during resume before the MD
sync thread starts and clears the MD_RECOVERY_NEEDED flag.

Cc: stable@vger.kernel.org # 4.16+
Signed-off-by: NHeinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

Signed-off-by: NWang Sheng-Hui <shhuiw@foxmail.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

Ideally, we'd like to get rid of all VLAs in the kernel and add -Wvla to
the build args: https://lkml.org/lkml/2018/3/7/621

This one is a simple case, since we don't actually need the VLA at all: we
can just iterate over the stripes twice, once to emit their names, and the
second time to emit status (i.e. trade memory for time). Since the number
of stripes is probably low, this is hopefully not that expensive.
Signed-off-by: NTycho Andersen <tycho@tycho.ws>
Reviewed-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

So developer could distinguish data and metadata bios easier.
Signed-off-by: NQu Wenruo <wqu@suse.com>
Reviewed-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

Since crypto API commit 9fa68f62 ("crypto: hash - prevent using keyed
hashes without setting key") dm-integrity cannot use keyed algorithms
without the key being set.

The dm-integrity recognizes this too late (during use of HMAC), so it
allows creation and formatting of superblock, but the device is in fact
unusable.

Fix it by detecting the key requirement in integrity table constructor.
Signed-off-by: NMilan Broz <gmazyland@gmail.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

Signed-off-by: NWang Sheng-Hui <shhuiw@foxmail.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

Signed-off-by: NHeinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

Signed-off-by: NHeinz Mauelshagen <heinzm@redhat.com>
Reviewed-by: NScott Bauer <Scott.Bauer@intel.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

This target's kernel module being named dm-unstripe.ko doesn't allow
lvm2's DM module autoload capability to load the dm-unstripe.ko
because lvm2 looks for dm-unstriped.ko due to the target name being
"unstriped".

Add the "dm-unstriped" module alias to resolve this oversight.

NOTE: this isn't needed for the "striped" target, despite its source
file being named dm-stripe.c, because it is part of dm-mod.ko.
Signed-off-by: NHeinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

Address "FIXME: must support non power of 2 chunk_size, dm-stripe.c does".

Bump target version to indicate change.
Signed-off-by: NHeinz Mauelshagen <heinzm@redhat.com>
Tested-by: NScott Bauer <Scott.Bauer@intel.com>
Reviewed-by: NScott Bauer <Scott.Bauer@intel.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

dm-crypt consumes an excessive amount memory when the user attempts to
zero a dm-crypt device with "blkdiscard -z". The command "blkdiscard -z"
calls the BLKZEROOUT ioctl, it goes to the function __blkdev_issue_zeroout,
__blkdev_issue_zeroout sends a large amount of write bios that contain
the zero page as their payload.

For each incoming page, dm-crypt allocates another page that holds the
encrypted data, so when processing "blkdiscard -z", dm-crypt tries to
allocate the amount of memory that is equal to the size of the device.
This can trigger OOM killer or cause system crash.

Fix this by limiting the amount of memory that dm-crypt allocates to 2%
of total system memory. This limit is system-wide and is divided by the
number of active dm-crypt devices and each device receives an equal
share.

Cc: stable@vger.kernel.org
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

Could be useful for a target to return stats or other information.
If a target does DMEMIT() anything to @result from its .message method
then it must return 1 to the caller.
Signed-off-By: NMike Snitzer <snitzer@redhat.com>

dm_get_bdev_for_ioctl()'s return of 0 or 1 must be the result from
prepare_ioctl (1 means the ioctl was issued to a partition, 0 means it
wasn't).  Unfortunately commit 519049af ("dm: use blkdev_get rather
than bdgrab when issuing pass-through ioctl") reused the variable 'r'
to store the return from blkdev_get() that follows prepare_ioctl()
-- whereby dropping prepare_ioctl()'s result on the floor.

This can lead to an ioctl or persistent reservation being issued to a
partition going unnoticed, which implies the extra permission check for
CAP_SYS_RAWIO is skipped.

Fix this by using a different variable to store blkdev_get()'s return.

Fixes: 519049af ("dm: use blkdev_get rather than bdgrab when issuing pass-through ioctl")
Reported-by: NAlasdair G Kergon <agk@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

The ability to have multipath dynamically attach a scsi_dh, that the user
specified in the multipath table, was broken by commit e8f74a0f ("dm
mpath: eliminate need to use scsi_device_from_queue").

Restore the ability to load, and attach, a particular scsi_dh module if
one is specified (as noticed by checking m->hw_handler_name).

Fixes: e8f74a0f ("dm mpath: eliminate need to use scsi_device_from_queue")
Reported-by: NPaul Mackerras <paulus@ozlabs.org>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

After v4.12 commit e2460f2a ("dm: mark targets that pass integrity
data"), dm-multipath, e.g. on DIF+DIX SCSI disk paths, does not support
block integrity any more. So add it to the whitelist.

This is also a pre-requisite to use block integrity with other dm layer(s)
on top of multipath, such as kpartx partitions (dm-linear) or LVM.

Also, bump target version to reflect this fix.

Fixes: e2460f2a ("dm: mark targets that pass integrity data")
Cc: <stable@vger.kernel.org> #4.12+
Bisected-by: NFedor Loshakov <loshakov@linux.vnet.ibm.com>
Signed-off-by: NSteffen Maier <maier@linux.vnet.ibm.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

Instead of scsi_device_from_queue(), use scsi_dh_attached_handler_name()
-- whose implementation uses scsi_device_from_queue() to avoid trying to
access SCSI-specific resources from non-SCSI devices.

Fixes buildbot reported issue when CONFIG_SCSI isn't set:
 ERROR: "scsi_device_from_queue" [drivers/md/dm-multipath.ko] undefined!

Fixes: 8d47e659 ("dm mpath: remove unnecessary NVMe branching in favor of scsi_dh checks")
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

Initialize all the scsi_dh related 'struct multipath' members regardless
of whether a scsi_dh is in use or not.

The subtle (and fragile) SCSI-assuming legacy code clearly needs further
decoupling from non-SCSI (and/or developer understanding).

Fixes: 8d47e659 ("dm mpath: remove unnecessary NVMe branching in favor of scsi_dh checks")
Reported-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

Pull x86/pti updates from Thomas Gleixner:
 "Yet another pile of melted spectrum related updates:

   - Drop native vsyscall support finally as it causes more trouble than
     benefit.

   - Make microcode loading more robust. There were a few issues
     especially related to late loading which are now surfacing because
     late loading of the IB* microcodes addressing spectre issues has
     become more widely used.

   - Simplify and robustify the syscall handling in the entry code

   - Prevent kprobes on the entry trampoline code which lead to kernel
     crashes when the probe hits before CR3 is updated

   - Don't check microcode versions when running on hypervisors as they
     are considered as lying anyway.

   - Fix the 32bit objtool build and a coment typo"

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/kprobes: Fix kernel crash when probing .entry_trampoline code
  x86/pti: Fix a comment typo
  x86/microcode: Synchronize late microcode loading
  x86/microcode: Request microcode on the BSP
  x86/microcode/intel: Look into the patch cache first
  x86/microcode: Do not upload microcode if CPUs are offline
  x86/microcode/intel: Writeback and invalidate caches before updating microcode
  x86/microcode/intel: Check microcode revision before updating sibling threads
  x86/microcode: Get rid of struct apply_microcode_ctx
  x86/spectre_v2: Don't check microcode versions when running under hypervisors
  x86/vsyscall/64: Drop "native" vsyscalls
  x86/entry/64/compat: Save one instruction in entry_INT80_compat()
  x86/entry: Do not special-case clone(2) in compat entry
  x86/syscalls: Use COMPAT_SYSCALL_DEFINEx() macros for x86-only compat syscalls
  x86/syscalls: Use proper syscall definition for sys_ioperm()
  x86/entry: Remove stale syscall prototype
  x86/syscalls/32: Simplify $entry == $compat entries
  objtool: Fix 32-bit build

Pull timer fix from Thomas Gleixner:
 "Just a single fix which adds a missing Kconfig dependency to avoid
  unmet dependency warnings"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource/atmel-st: Add 'depends on HAS_IOMEM' to fix unmet dependency

Pull RAS fixes from Thomas Gleixner:
 "Two small fixes for RAS/MCE:

   - Serialize sysfs changes to avoid concurrent modificaiton of
     underlying data

   - Add microcode revision to Machine Check records. This should have
     been there forever, but now with the broken microcode versions in
     the wild it has become important"

* 'ras-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/MCE: Serialize sysfs changes
  x86/MCE: Save microcode revision in machine check records

Pull perf updates from Thomas Gleixner:
 "Another set of perf updates:

   - Fix a Skylake Uncore event format declaration

   - Prevent perf pipe mode from crahsing which was caused by a missing
     buffer allocation

   - Make the perf top popup message which tells the user that it uses
     fallback mode on older kernels a debug message.

   - Make perf context rescheduling work correcctly

   - Robustify the jump error drawing in perf browser mode so it does
     not try to create references to NULL initialized offset entries

   - Make trigger_on() robust so it does not enable the trigger before
     everything is set up correctly to handle it

   - Make perf auxtrace respect the --no-itrace option so it does not
     try to queue AUX data for decoding.

   - Prevent having different number of field separators in CVS output
     lines when a counter is not supported.

   - Make the perf kallsyms man page usage behave like it does for all
     other perf commands.

   - Synchronize the kernel headers"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Fix ctx_event_type in ctx_resched()
  perf tools: Fix trigger class trigger_on()
  perf auxtrace: Prevent decoding when --no-itrace
  perf stat: Fix CVS output format for non-supported counters
  tools headers: Sync x86's cpufeatures.h
  tools headers: Sync copy of kvm UAPI headers
  perf record: Fix crash in pipe mode
  perf annotate browser: Be more robust when drawing jump arrows
  perf top: Fix annoying fallback message on older kernels
  perf kallsyms: Fix the usage on the man page
  perf/x86/intel/uncore: Fix Skylake UPI event format

Pull locking fix from Thomas Gleixner:
 "rt_mutex_futex_unlock() grew a new irq-off call site, but the function
  assumes that its always called from irq enabled context.

  Use (un)lock_irqsafe() to handle the new call site correctly"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  rtmutex: Make rt_mutex_futex_unlock() safe for irq-off callsites

Pull dmaengine fixes from Vinod Koul:
 "Two small fixes are for this cycle:

   - fix max_chunk_size for rcar-dmac for R-Car Gen3

   - fix clock resource of mv_xor_v2"

* tag 'dmaengine-fix-4.16-rc5' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: mv_xor_v2: Fix clock resource by adding a register clock
  dmaengine: rcar-dmac: fix max_chunk_size for R-Car Gen3

Pull GPIO fix from Linus Walleij:
 "This is a single GPIO fix for the v4.16 series affecting the Renesas
  driver, and fixes wakeup from external stuff"

* tag 'gpio-v4.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: rcar: Use wakeup_path i.s.o. explicit clock handling

On the CP110 components which are present on the Armada 7K/8K SoC we need
to explicitly enable the clock for the registers. However it is not
needed for the AP8xx component, that's why this clock is optional.

With this patch both clock have now a name, but in order to be backward
compatible, the name of the first clock is not used. It allows to still
use this clock with a device tree using the old binding.
Signed-off-by: NGregory CLEMENT <gregory.clement@bootlin.com>
Reviewed-by: NRob Herring <robh@kernel.org>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>