Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We need this to know where a symbol in a callchain came from,
for various reasons, among them precise annotation from a
TUI/GUI tool.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1269459619-982-5-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Callchains have markers inside their capture to tell we
enter a context (kernel, user, ...).

Those are not displayed in the callchains but they are
incidentally an active part of the radix tree where
callchains are stored, just like any other address.

If we have the two following callchains:

addr1 -> addr2 -> user context -> addr3
addr1 -> addr2 -> user context -> addr4
addr1 -> addr2 -> addr 5

This is pretty common if addr1 and addr2 are part of an
interrupt path, addr3 and addr4 are user addresses and
addr5 is a kernel non interrupt path.

This will be stored as follows in the tree:

                   addr1
                   addr2
                   /   \
                  /     addr5
            user context
               /    \
             addr3  addr4

But we ignore the context markers in the report, hence
the addr3 and addr4 will appear as orphan branches:

    |--28.30%-- hrtimer_interrupt
    |          smp_apic_timer_interrupt
    |          apic_timer_interrupt
    |          |           <------------- here, no parent!
    |          |          |
    |          |          |--11.11%-- 0x7fae7bccb875
    |          |          |
    |          |          |--11.11%-- 0xffffffffff60013b
    |          |          |
    |          |          |--11.11%-- __pthread_mutex_lock_internal
    |          |          |
    |          |          |--11.11%-- __errno_location

Fix this by removing the context markers when we process the
callchains to the tree.
Reported-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1269274173-20328-1-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

There was a colorful mix of header guards - standardize them.
Signed-off-by: NJohn Kacur <jkacur@redhat.com>
LKML-Reference: <alpine.LFD.2.00.0909241756530.11383@localhost.localdomain>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Factorize the dso mapping helpers into a single purpose common file
"util/map.c"
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Brice Goglin <Brice.Goglin@inria.fr>

If we recorded with -g option to record the callchain, right now
we require a -g option to perf report as well - and people reported
this as unnecessary complication: the user already specified -g
once, no need to require it a second time.

So if the recording includes call-chains, display the callchain by
default from perf report.

( The user can override this default using "-g none" option from
  perf report. )
Reported-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1249690585-9145-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The callchain fractal mode builds each new total hits in a new
branch of profiling by using the parent's hits of the current
branch plus the hits of the children.

This is wrong, the total hits of a branch should be made of the
sum of every children hits, we must ignore the parent hits in
this scope.

This patch also fixes another mistake with the hit counting.

Now the rates are correct.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The current callchain displays the overhead rates as absolute:
relative to the total overhead.

This patch provides relative overhead percentage, in which each
branch of the callchain tree is a independant instrumentated object.

This provides a 'fractal' view of the call-chain profile: each
sub-graph looks like a profile in itself - relative to its parent.

You can produce such output by using the "fractal" mode
that you can abbreviate via f, fr, fra, frac, etc...

./perf report -s sym -c fractal

Example:

     8.46%  [k] copy_user_generic_string
                |
                |--52.01%-- generic_file_aio_read
                |          do_sync_read
                |          vfs_read
                |          |
                |          |--97.20%-- sys_pread64
                |          |          system_call_fastpath
                |          |          pread64
                |          |
                |           --2.81%-- sys_read
                |                     system_call_fastpath
                |                     __read
                |
                |--39.85%-- generic_file_buffered_write
                |          __generic_file_aio_write_nolock
                |          generic_file_aio_write
                |          do_sync_write
                |          reiserfs_file_write
                |          vfs_write
                |          |
                |          |--97.05%-- sys_pwrite64
                |          |          system_call_fastpath
                |          |          __pwrite64
                |          |
                |           --2.95%-- sys_write
                |                     system_call_fastpath
                |                     __write_nocancel
[...]
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1246772361-9960-5-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Callchains output may become a burden on a trace because even
rarely hit site are exposed. This can be too much information.

Let the user set a threshold as a minimum percent of hits using
the new pattern for the -c option:

    -c mode,min_percent

Example:

$ perf report -s sym -c flat,4

     8.25%  [k] copy_user_generic_string
             4.19%
                copy_user_generic_string
                generic_file_aio_read
                do_sync_read
                vfs_read
                sys_pread64
                system_call_fastpath
                pread64

     5.39%  [k] search_by_key
     4.63%  0x00000000009e0a
     2.36%  [k] memcpy_c
[...]

$ perf report -s sym -c graph,2

     8.25%  [k] copy_user_generic_string
                |
                |--4.31%-- generic_file_aio_read
                |          do_sync_read
                |          vfs_read
                |          |
                |           --4.19%-- sys_pread64
                |                     system_call_fastpath
                |                     pread64
                |
                 --3.24%-- generic_file_buffered_write
                           __generic_file_aio_write_nolock
                           generic_file_aio_write
                           do_sync_write
                           reiserfs_file_write
                           vfs_write
                           |
                            --3.14%-- sys_pwrite64
                                      system_call_fastpath
                                      __pwrite64

     5.39%  [k] search_by_key
                |
                 --2.23%-- reiserfs_update_sd_size

     4.63%  0x00000000009e0a

     2.36%  [k] memcpy_c
[...]

You can also omit it and it will default to 0.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1246558475-10624-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Currently, the printing of callchains is done in a single
vertical level, this is the "flat" mode:

8.25%  [k] copy_user_generic_string
             4.19%
                copy_user_generic_string
                generic_file_aio_read
                do_sync_read
                vfs_read
                sys_pread64
                system_call_fastpath
                pread64

This patch introduces a new "graph" mode which provides a
hierarchical output of factorized paths recursively sorted:

 8.25%  [k] copy_user_generic_string
                |
                |--4.31%-- generic_file_aio_read
                |          do_sync_read
                |          vfs_read
                |          |
                |          |--4.19%-- sys_pread64
                |          |          system_call_fastpath
                |          |          pread64
                |          |
                |           --0.12%-- sys_read
                |                     system_call_fastpath
                |                     __read
                |
                |--3.24%-- generic_file_buffered_write
                |          __generic_file_aio_write_nolock
                |          generic_file_aio_write
                |          do_sync_write
                |          reiserfs_file_write
                |          vfs_write
                |          |
                |          |--3.14%-- sys_pwrite64
                |          |          system_call_fastpath
                |          |          __pwrite64
                |          |
                |           --0.10%-- sys_write
[...]

The command line has then changed.

By providing the -c option, the callchain will output in the
flat mode by default.

But you can override it:

    perf report -c graph

or

    perf report -c flat

You can also pass the abreviated mode:

    perf report -c g

or

    perf report -c gra

will both make use of the graph mode.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1246550301-8954-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The copy we were using came from another copy I did for the dwarves
(pahole) package, that came from the kernel years ago.

The only function that is used by the perf tools and that isn't in the
kernel is list_del_range, that I'm leaving in the perf tools only for
now.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20090701174608.GA5823@ghostprotocols.net>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The tools/perf/util/rbtree.c copy already drifted by three
csets:

 4b324126
 4c601178
 16c047ad

So remove the copy and use the lib/rbtree.c directly, sharing
the source code while still generating a separate object file,
since tools/perf uses a far more agressive -O6 switch.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090701152837.GG15682@ghostprotocols.net>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Enable -Wextra. This found a few real bugs plus a number
of signed/unsigned type mismatches/uncleanlinesses. It
also required a few annotations

All things considered it was still worth it so lets try with
this enabled for now.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch resolves the names, when possible, of each ip
present in the callchains while using the -c option with perf
report.

Example:

5.40%  [k] __d_lookup
             5.37%
                perf_callchain
                perf_counter_overflow
                intel_pmu_handle_irq
                perf_counter_nmi_handler
                notifier_call_chain
                atomic_notifier_call_chain
                notify_die
                do_nmi
                nmi
                do_lookup
                __link_path_walk
                path_walk
                do_path_lookup
                user_path_at
                sys_faccessat
                sys_access
                system_call_fastpath
                0x7fb609846f77

             0.01%
                perf_callchain
                perf_counter_overflow
                intel_pmu_handle_irq
                perf_counter_nmi_handler
                notifier_call_chain
                atomic_notifier_call_chain
                notify_die
                do_nmi
                nmi
                do_lookup
                __link_path_walk
                path_walk
                do_path_lookup
                user_path_at
                sys_faccessat
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1246419315-9968-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

We plan to display the callchains depending on some user-configurable
parameters.

To gather the callchains stats from the recorded stream in a fast way,
this patch introduces an ad hoc radix tree adapted for callchains and also
a rbtree to sort these callchains once we have gathered every events
from the stream.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1246026481-8314-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>