Only save the .config file if we're doing mrproper
Signed-off-by: NAndrew Jones <drjones@redhat.com>
Link: http://lkml.kernel.org/r/1313155932-20092-3-git-send-email-drjones@redhat.comSigned-off-by: NSteven Rostedt <rostedt@goodmis.org>

Signed-off-by: NAndrew Jones <drjones@redhat.com>
Link: http://lkml.kernel.org/r/1313155932-20092-2-git-send-email-drjones@redhat.comSigned-off-by: NSteven Rostedt <rostedt@goodmis.org>

In testing one of my boxes, I found that I only wanted to build and
install the kernel. I wanted to manually reboot the box and test it.
Adding a TEST_TYPE option "install" allows this to happen.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The MIN_CONFIG is a single config that is considered to have all the
configs that are required to boot the box.

ADD_CONFIG is a list of configs that we add that may contain configs
known to be broken (set off) or just configs that we want every box to
have and this can include shared configs.

If a config has no MIN_CONFIG defined, but has multiple files defined
for the ADD_CONFIG, the test will die, because the MIN_CONFIG will
default to ADD_CONFIG. The problem is the code to open MIN_CONFIG
expects a string of one file, not multiple, and the open will fail.

Since the real minconfig that is used is a concatination of MIN_CONFIG
and ADD_CONFIG files, we change the code to open that instead of
whatever MIN_CONFIG defaults to.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The IGNORE_CONFIG file holds the configs that we don't want to change
(with their proper settings). But on start up, the make noconfig is
executed, and the configs that are on are also put into the ignore
config category. But these are configs that were forced on by the
kconfig scripts and not something that we found must be enabled to boot
our machine. By keeping the configs that are forced on by default,
separate from the configs we found that are required to boot the box, we
can get a much more interesting IGNORE_CONFIG. In fact, the
IGNORE_CONFIG can usually end up being the must have configs to boot,
and only have 6 or 7 configs set.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

If the defined OUTPUT_MIN_CONFIG in the make_min_config test exists,
then give a prompt to ask the user if they want to use that config
instead, as it is very often the case, especially when the test has been
interrupted. The OUTPUT_MIN_CONFIG is usually the config that one wants
to use to continue the test where they left off.

But if START_MIN_CONFIG is defined (thus the MIN_CONFIG is not the
default), then do not prompt, as it will be annoying if the user has
this as one of many tests, and the test pauses waiting for input, while
the user is sleeping.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

To save time, the test does not just grab any option and test
it. The Kconfig files are examined to determine the dependencies
of the configs. If a config is chosen that depends on another
config, that config will be checked first. By checking the
parents first, we can eliminate whole groups of configs that
may have been enabled.

For example, if a USB device config is chosen and depends on
CONFIG_USB, the CONFIG_USB will be tested before the device.
If CONFIG_USB is found not to be needed, it, as well as all
configs that depend on it, will be disabled and removed from
the current min_config.

Note, the code from streamline_config (make localmodconfig)
was copied and used to find the dependencies in the Kconfig file.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

After doing a make localyesconfig, your kernel configuration may
not be the most useful minimum configuration. Having a true minimum
config that you can use against other configs is very useful if
someone else has a config that breaks on your code. By only forcing
those configurations that are truly required to boot your machine
will give you less of a chance that one of your set configurations
will make the bug go away. This will give you a better chance to
be able to reproduce the reported bug matching the broken config.

Note, this does take some time, and may require you to run the
test over night, or perhaps over the weekend. But it also allows
you to interrupt it, and gives you the current minimum config
that was found till that time.

Note, this test automatically assumes a BUILD_TYPE of oldconfig
and its test type acts like boot.

TODO: add a test version that makes the config do more than just
      boot, like having network access.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

There has been too many times that I put in one too many SKIP
TEST_STARTs and start the test with the default randconfig by accident
that I added this to have ktest ask the user for which test they want to
run if no TEST_START is specified.

Now if I accidently start the test with all TEST_STARTs skipped, ktest
asks what test do I want to run, and I now have a chance to kill it
before it does a make mrproper on my build directory.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Several places had the following code:

    get_grub_index;
    get_version;
    install;

    start_monitor;
    return monitor;

Creating a function "start_monitor_and_boot()" replaces these mulitple
uses with a single call.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Doing a patchcheck test, there may be warnings that gcc produces which
may be OK, and the test should not fail on that commit. By adding a
IGNORE_WARNINGS option to list a space delimited SHA1s that are ignored
lets the user avoid having the test fail on certain commits.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The tar command to create the module directory is cjf, but the
extraction only had xf. This works on most versions of tar, but some
versions of tar require xjf for extraction as well.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

As multiple tests may be executed by the same server, have the test
machine name add uniqueness to the value of the temp directory.
Otherwise the temp directories may overwrite each other's tests.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

There are some cases that a patch may be needed to apply to the kernel
in patchcheck or bisect tests. Adding a PRE_BUILD option to apply the
patch and POST_BUILD to remove it, allows for this to be done easily.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

When a config is set with CONFIG_MODULES=n, it does not mean that the
kernel does not need an initrd to boot. For systems that depend on LVM
and such, an initrd must run first.

If POST_INSTALL is defined, then run the post install regardless if
modules are needed or not.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The LOG_FILE variable needs to evaluate the $ options as well.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

After a bug is found, the STOP_AFTER_FAILURE timeout is used to
determine how much output should be printed before breaking out
of the monitor loop. This is to get things like call traces and
enough infromation about the bug to help determine what caused it.

The STOP_AFTER_FAILURE is usually much shorter than the TIMEOUT
that is used to determine when to quit after no more stdio is given.

But since the stdio read uses a wait on I/O, the STOP_AFTER_FAILURE is
only checked after we get something from I/O. But if the I/O does
not return any more data, we wait the TIMEOUT period instead, even
though we already triggered a bug report.

The wait on I/O should honor the STOP_AFTER_FAILURE time if a bug has
been found.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Using the build KCONFIG_ALLCONFIG environment variable to force
the min config may not always work properly. Since ktest is
written in perl, it is trivial to read and replace the current
config with the configs specified by the min config.

Now the min config (and add configs) are read by perl and before
a make is done, these configs in the .config file are replaced
by the version in the min config.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Searching through several tests, it gets confusing which test result
is for which test. By adding the TEST_NAME option, the user can tell
which test result belongs to which test.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Currently the config_bisect compares the min config with the
CONFIG_BISECT config. There may be another config that we know
is good that we want to ignore configs on. By passing in this
config it will ignore the options that are set in the good config.

Note: This only ignores the config, it does not (yet) handle
options that are different between the two configs. If the good
config has "SLAB" set and the bad config has "SLUB" it will not
find the bug if the bug had to do with changing these two options.

This is something that I intend to implement in the future.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

When a triple fault happens in a test, no call trace nor panic
is displayed. Instead, the system reboots to the good kernel.
Since the good kernel may display a boot prompt that matches the
success string, ktest may think that the test succeeded, when it
did not.

Detecting triple faults is tricky because it is hard to generalize
what a reboot looks like. The best that we can come up with for now
is to examine the Linux banner. If we detect that the Linux banner
matches the test we want to test, then look to see if we hit another
Linux banner with a different kernel is booted. This can be assumed
to be a triple fault.

We can't just check for two Linux banners because things like
early printk may cause the Linux banner to be displayed twice. Checking
for different kernel versions should be the safe bet.

If this for some reason detects a false triple boot. A new ktest
config option is also created:

 DETECT_TRIPLE_FAULT

This can be set to 0 to disable this checking.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Different timeouts can cause the ktest monitor to break out of the
loop. It becomes annoying that one does not know the reason why
it exited the monitor loop. Display the cause of the reason why
the loop was exited.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

By ignoring the unset values of the minconfig in deciding
what to test in the config_bisect can cause the problem
config from being tested too.

Just do not test the configs that are set in the minconfig.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The command that is called that reboots the kernel may fail
but the return code is not passed back to the ktest.pl script.
This is because a ';' is used between the two commands and
if the second command fails, only the first command's return
code is returned. Using a '&&' between the two commands fixes
this.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Because in perl the array size returned by $#arr, is the last
index and not the actually size of the array, we end the config
bisect early, thinking there is only one config left when there
are in fact two. Thus the result has a 50% chance of picking
the correct config that caused the problem.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

There are cases where one ktest option may be used within another
ktest option. Allow them to be reused just like config variables
but there are evaluated at time of test not config processing time.

Thus having something like:

MAKE_CMD = make ARCH=${ARCH}

TEST_START
ARCH = powerpc

TEST_START
ARCH = arm

Will have the arch defined for each test iteration.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

I found that I constantly reuse information for each test case.
It would be nice to just define a variable to reuse.

For example I may have:

TEST_START
[...]
TEST = ssh root@mybox /path/to/my/script

TEST_START
[...]
TEST = ssh root@mybox /path/to/my/script

[etc]

The issue is, I may wont to change that script or one of the other
fields. Then I need to update each line individually.

With the addition of config variables (variables only used during parsing
the config) we can simplify the config files. These variables can
also be defined multiple times and each time the new value will
overwrite the old value.

The convention to use a config variable over a ktest option is to use :=
instead of =.

Now we could do:

USER := root
TARGET := mybox
TEST_SCRIPT := /path/to/my/script
TEST_CASE := ${USER}@${TARGET} ${TEST_SCRIPT}

TEST_START
[...]
TEST = ${TEST_CASE}

TEST_START
[...]
TEST = ${TEST_CASE}

[etc]

Now we just need to update the variables at the top.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The patches being checked may not leave the kernel in a state
that the next run will allow the new kernel to be copied to the
machine. Reboot to a known good kernel before continuing to the
next kernel to test.

Added option PATCHCHECK_SLEEP_TIME for the max time to sleep between
patchcheck reboots.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Reboot after each bisect run regardless if the bisect passed
or failed. The test may just be to boot the kernel and that kernel
may not have a way to copy the next kerne to it. Reboot to a known
good kernel after each bisect run.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

If the test failed due to timeout for boot, print a message saying
so. Otherwise the user will be confused to why their test just failed.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The command to run post install (for those that want initrds) was
broken. Instead of doing a substitution for the $KERNEL_VERSION
variable. It was replacing the entire command with nothing.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Currently, if a test causes constant output but never reaches a
boot prompt, or crashes, the test will never stop. Add STOP_TEST_AFTER
to create a variable that will stop (and fail) the test after it has run
for this amount of time. The default is 10 minutes. Setting this
variable to -1 will disable it.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Record the console of tests to both the console and the log.
Also, record the bug reports afte the test has completed.
Currently, if a kernel bug happens while running the userland
test, the test stops and will not record the kernel bug. This
makes it difficult to solve what happened.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The config STOP_AFTER_FAILURE is the number of seconds to continue
the test when a failure is detected. This lets the monitor record
more data to the logs and console that may be helpful in solving
the bug that was found.

But the test had a bug. If the failure caused multiple
"Call Trace" stack dumps, the start time to compare the
STOP_AFTER_FAILURE would constantly be reset. Only update the start
time at the first "Call Trace" instance.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Add the config option BISECT_FILES that allows the user to
specify what path in the kernel to run the git bisect on.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

If a during a git bisect, ktest fails on something other than
what it is testing (if BISECT_TYPE is test but it fails on build),
if BISECT_SKIP is set, then it will do a "git bisect skip" instead
of just failing the bisect and letting the user find a good commit
to test.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

For both git bisect and config bisect, if BISECT_MANUAL is set to 1,
then bisect will stop between iterations and ask the user for the
result. The actual result is ignored. This makes it possible to
use ktest.pl for bisecting configs and git and let the user examine
the results themselves and enter their own results.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

When bisecting, one may come across a kernel that does not have
make oldnoconfig. In this case, we need to run the command "yes"
into a make oldconfig. This will select defaults instead of 'n'
into each command, but it works as a work around.

Note, "yes n" will not work because a config may have a value that
"n" is not acceptable for.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Currently we just look for a Call Trace to start the time out
when to reboot the box. But if the kernel panics and does not
show a Call Trace, the test will not reboot the box after
the specified timeout.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

If the test fails and a logfile was specified. Print the name to
let the user know where to look for more information on the
failure.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>