Grab bag for all the special cases:
- i9xx_check_fifo_underruns is only called from crtc_enable hooks,
  i.e. process context.
- i915_enable_asle_pipestat is only called from interrupt postinstall
  hooks. So again process context.
- gen8_irq_power_well_post_enable is called from the runtime pm code,
  which again means process context.
- The open-coded hpd_irq_setup loop in _thaw is also running in process
  context.

So for all of them the plain _irq variant is sufficient.
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

irq handlers always run with interrupts locally disabled, so
plain spinlocks is all we need. I've also reviewed again that they
all follow the _irq_handler postfix convention.
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

All the interrupt setup/teardown hooks are always run from plain
process context. So again just the _irq variant is good enough.
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Work functions are in process context, so plain _irq spinlock variants
is all we need.

The hpd reenable work didn't follow the _work/_work_func postfix
naming scheme, so adjust that while at it.
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

->detect callbacks are only ever called from process context, and
there's no fancy nesting going on here. So plain _irq spinlock
variants is what we want.
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

i915_capture_error_state can be called from all kinds of contexts, so
needs the full irqsave dance. But the other two places to grab and
release the error state are only called from process context. So
simplify them to the plaine _irq spinlock versions to clarify the
locking semantics.

Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Now we tackle the functions also called from interrupt handlers.

- intel_check_page_flip is exclusively called from irq handlers, so a
  plain spin_lock is all we need. In i915_irq.c we have the convention
  to give all such functions an _irq_handler postfix, but that would
  look strange and als be a bit a misleading name. I've opted for a
  WARN_ON(!in_irq()) instead.

- The other two places left are called both from interrupt handlers
  and from our reset work, so need the full irqsave dance. Annotate
  them with a short comment.
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

It's good practice to use the more specific versions for irq save
spinlocks both as executable documentation and to enforce saner
design. The _irqsave version really should only be used if the calling
context is unknown and there's a good reason to call a function from
all kinds of places.

This is the first step whice replaces all occurances of _irqsave in
process context with the simpler irq disable/enable variants. We don't
have any funky spinlock nesting going on, especially since the
event_lock is the outermost of the irq/vblank related spinlocks.
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We changed to an interrupt based vblank wait (as opposed to polling)
in:
 commit 44bd93a3d367913d883be6abba9a6e51a53c4e90
 Author: Daniel Vetter <daniel.vetter@ffwll.ch>
 Date:   Fri Jul 25 23:36:44 2014 +0200

    drm/i915: Use generic vblank wait

However we already had vblank waits on the wrong side of
drm_vblank_{on,off}() calls due to various workarounds, so now we get
a warning more or less every time we do a modeset, and we fail to
wait for the vblank like we should.

Move the drm_vblank_{on,off}() calls back out from
intel_crtc_{enable,disable}_planes() so that all of these vblank waits
return to proper operation. Also move the cxsr wait a bit earlier so
that we can keep the encoder disable after we've turned off vblanks.
Moving stuff out from the plane enable/disable functions seems
preferrable to moving the workaround stuff in since the workarounds are
required only on specific platforms.

While at it switch over to the drm_crtc_ variants of the vblank on/off
functions.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82525
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82490
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Requested by Chris, and also requested to keep it since it's a
more accurate name in his opinion.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This has the upside that it will no longer steal interrupts from the
interrupt handler on pre-g4x. Furthermore this will now scream properly
on all platforms if we don't have hw counters enabled.

v2: Adjust to the new names.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Originally the irq safe spinlock was required because of asle
interrupts. But since

commit 91a60f20
Author: Jani Nikula <jani.nikula@intel.com>
Date:   Thu Oct 31 18:55:48 2013 +0200

    drm/i915: move opregion asle request handling to a work queue

there's no need for this any more. So switch to the simpler mutex.

v2: Cite the right commit, spotted by Jani.

Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This does not seem to make a difference for the structs in question, but
document the intent.

v2: also pack union child_device_config (Daniel)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Yet another place that wasn't properly transformed when implementing
SOix. While at it convert the checks to WARN_ON on gen5+ (since we
don't have UMS potentially doing stupid things on those platforms).
And also add the corresponding checks to the put functions (again with
a WARN_ON) for gen5+.

v2: Drop the WARNINGS in the irq_put functions (including the existing
one for vebox), Chris convinced me that they're not that terribly
useful.

v3: Don't forget about execlist code.

Cc: Imre Deak <imre.deak@intel.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: "Volkin, Bradley D" <bradley.d.volkin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

We want to enable/disable display IRQs only if global i915 IRQs are
enabled. To check the latter it's not enough to consult the DRM
dev->irq_enabled flag, since runtime PM can disable/enable IRQs
and it won't adjust this flag only the i915 specific
dev_priv->pm._irqs_disabled flag. Fix this by using the proper
intel_irqs_enabled() helper instead.

Fortunately this didn't cause an actual problem since even if we enabled
display IRQs too early (before enabling global i915 IRQs) the
VLV_MASTER_IER would still be clear masking all IRQs.

This issue was caught by

commit 920dd15a2b2fc60d054646a8a1ffd6aeb6090e05
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Wed Aug 27 10:43:37 2014 +0200

    drm/i915: WARN if interrupts aren't on in en/disable_pipestat
Signed-off-by: NImre Deak <imre.deak@intel.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

It seems cleaner if we keep CURCNTR at 0 when the cursor is disabled,
so don't set the CURSOR_PIPE_CSC_ENABLE bit unless the cursor is
enabled.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

To make the code a bit more undestandable move the
intel_crtc->cursor_base assignment into the low level update cursor
routines. That's were we compare the current value with the new one
so immediately seeing that it gets assigned only afterwards helps
one to understand that it gets assigned only after the comparison.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

If a page isn't allocated as __GFP_MOVEABLE it won't move around, so
no need to grab a reference to lock it into place.

Discovered while reviewing page allocation handling in i915 gem.
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

While discussing/reviewing __GFP_MOVEABLE behaviour and interactions
with our various page allocations on irc Chris brought up that the
scratch page isn't allocated as moveable, but we still grab/put a
reference to lock it in place. Which is unecessary.

So drop that.
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

7e4bf45dbd99a965c7b5d5944c6dc4246f171eb5 introduced the regression.
We fix it by doing the right assignment of crtc_y

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83747Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The data structure it was supposed to be sanity checking has long gone.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Factor out a piece of code from intel_pipe_set_base() that updates
the pipe size and adjust fitter.

This will help refactor the update primary plane path.

v2: use struct intel_crtc as argument to intel_update_pipe_size()

v3: use 'crtc' as argument name
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Optimize code avoiding helding dev mutex if old fb and current fb
are the same.

v2: take Ville's comments
	- move comment along with the pin_and_fence call
	- check for error before calling i915_gem_track_fb
	- move old_obj != obj to an upper if condition
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The !crtc->enabled case will now be handled by the !visible code,
since the handling is basically the same.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This was lost in

commit e11aa362
Author: Jesse Barnes <jbarnes@virtuousgeek.org>
Date:   Wed Jun 18 09:52:55 2014 -0700

    drm/i915: use runtime irq suspend/resume in freeze/thaw

which makes the second part of this commen a bit nonsense. Both were
originally added in

commit 15239099
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Tue Mar 5 09:50:58 2013 +0100

    drm/i915: enable irqs earlier when resuming

Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

As a preparation for atomic updates we need to split the code to check
everything we are going to commit first. This patch starts the work to
split intel_primary_plane_setplane() into check() and commit() parts.

More work is expected on this to get a better split of the two steps.
Ideally the commit() step should never fail.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Due to the upcoming atomic modesetting feature we need to separate
some update functions into a check step that can fail and a commit
step that should, ideally, never fail.

The commit part can still fail, but that should be solved in another
upcoming patch.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Due to the upcoming atomic modesetting feature we need to separate
some update functions into a check step that can fail and a commit
step that should, ideally, never fail.

This commit splits intel_update_plane() and its commit part can still
fail due to the fb pinning procedure.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This new struct will be the storage of src and dst coordinates
between the check and commit stages of a plane update.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Now that vlv has runtime pm we kinda should check for that like on the
pch split platforms. Looks like this was simply lost in the vlv rpm
enabling.

Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Use full PPGTT as the default option in gen7.

Note that aliasing PPGTT is the default option for gen8 (see
HAS_PPGTT) since we're still fighting troubles around context
switching and execlists.

This may well come back to bite me later.
Signed-off-by: NMichel Thierry <michel.thierry@intel.com>
[danvet: Explain that gen8 full ppgtt is blocked on execlists for
now.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

If something while getting panel CRC this means that probably hw I/O error
so hw is busted and try again shouldn't help much.
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Based upon a patch from Deepak, but reworked to only apply on gen7+
and with the logic a bit clarified.

v2: Fix s/SHIFT/MASK/ fumble that Ville spotted.

Cc: Deepak S <deepak.s@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

If we believe that the device can cross cache domains in its prefetcher
(i.e. we allow neighbouring pages in different domains), we don't supply
a color_adjust callback. Use the presence of this callback to better
determine when we should be verifying that the GTT space we just
used is valid.

v2: Remove the superfluous struct drm_device function param as well.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
[danvet: Also adjust the comment per irc discussion with Chris.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

gen6 and earlier conflate address space selection (ppgtt vs ggtt) with
the security bit (i.e. only privileged batches were allowed to run from
ggtt). From Haswell only, you are able to select the security bit
separate from the address space - and we always requested to use ppgtt.
This breaks the golden render state batch execution with full-ppgtt as
that is only present in the global GTT and more generally any secure
batch that is not colocated in the ppgtt and ggtt. So we need to
disable the use of the ppgtt selector bit for secure batches, or else we
hang immediately upon boot and thence after every GPU reset...

v2: Only HSW differentiates between secure dispatch and ggtt, so simply
ignore the differentiation and always use secure==ggtt.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
[danvet: Rectify commit message as noted by Chris.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

In chv, we have two power wells Render & Media. We need to use
corresponsing forcewake count. If we dont follow this we are getting
error "*ERROR*: Timed out waiting for forcewake old ack to clear" due to
multiple entry into __vlv_force_wake_get.
Signed-off-by: NDeepak S <deepak.s@linux.intel.com>
Requested-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Also here, i915_gem_evict_vm causes an unbind, which can end up dropping
the last ref to the ppgtt.

Triggered by igt gem_evict_everything test.

Testcase: igt/gem_evict_everything
Signed-off-by: NMichel Thierry <michel.thierry@intel.com>
Reviewed-by: NChris Wilson <chris@cris-wilsonc.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Somehow I've overlooked this when simplifying the irq reinit
scheme on gen4.5+ in

commit 78ad455f
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Thu May 22 22:18:21 2014 +0200

    drm/i915: Improve irq handling after gpu resets

Since display interrups in general survive a gpu reset on those
platforms there's also no need to reinit the hotplug settings.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

drm_send_vblank_event() demands that we hold the event spinlock whilst
calling it, so do so.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
[danvet: Fix the double lock as requested by Chris.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Before we process the final unbind on an object and move it to the
unbound list, it is semantically cleaner if there are no more active
references to the object. (An active reference would imply that it was
still being accessed by the GPU after it became inaccessible.) The
caveat is that all callsites must be prepared for the object to
disappeared during the unbind - i.e. they must hold their own reference.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>