- 25 1月, 2018 13 次提交
-
-
由 Markus Elfring 提交于
Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Lyude Paul 提交于
Recently I got a Caldigit TS3 Thunderbolt 3 dock, and noticed that upon hotplugging my kernel would immediately crash due to igb: [ 680.825801] kernel BUG at drivers/pci/msi.c:352! [ 680.828388] invalid opcode: 0000 [#1] SMP [ 680.829194] Modules linked in: igb(O) thunderbolt i2c_algo_bit joydev vfat fat btusb btrtl btbcm btintel bluetooth ecdh_generic hp_wmi sparse_keymap rfkill wmi_bmof iTCO_wdt intel_rapl x86_pkg_temp_thermal coretemp crc32_pclmul snd_pcm rtsx_pci_ms mei_me snd_timer memstick snd pcspkr mei soundcore i2c_i801 tpm_tis psmouse shpchp wmi tpm_tis_core tpm video hp_wireless acpi_pad rtsx_pci_sdmmc mmc_core crc32c_intel serio_raw rtsx_pci mfd_core xhci_pci xhci_hcd i2c_hid i2c_core [last unloaded: igb] [ 680.831085] CPU: 1 PID: 78 Comm: kworker/u16:1 Tainted: G O 4.15.0-rc3Lyude-Test+ #6 [ 680.831596] Hardware name: HP HP ZBook Studio G4/826B, BIOS P71 Ver. 01.03 06/09/2017 [ 680.832168] Workqueue: kacpi_hotplug acpi_hotplug_work_fn [ 680.832687] RIP: 0010:free_msi_irqs+0x180/0x1b0 [ 680.833271] RSP: 0018:ffffc9000030fbf0 EFLAGS: 00010286 [ 680.833761] RAX: ffff8803405f9c00 RBX: ffff88033e3d2e40 RCX: 000000000000002c [ 680.834278] RDX: 0000000000000000 RSI: 00000000000000ac RDI: ffff880340be2178 [ 680.834832] RBP: 0000000000000000 R08: ffff880340be1ff0 R09: ffff8803405f9c00 [ 680.835342] R10: 0000000000000000 R11: 0000000000000040 R12: ffff88033d63a298 [ 680.835822] R13: ffff88033d63a000 R14: 0000000000000060 R15: ffff880341959000 [ 680.836332] FS: 0000000000000000(0000) GS:ffff88034f440000(0000) knlGS:0000000000000000 [ 680.836817] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 680.837360] CR2: 000055e64044afdf CR3: 0000000001c09002 CR4: 00000000003606e0 [ 680.837954] Call Trace: [ 680.838853] pci_disable_msix+0xce/0xf0 [ 680.839616] igb_reset_interrupt_capability+0x5d/0x60 [igb] [ 680.840278] igb_remove+0x9d/0x110 [igb] [ 680.840764] pci_device_remove+0x36/0xb0 [ 680.841279] device_release_driver_internal+0x157/0x220 [ 680.841739] pci_stop_bus_device+0x7d/0xa0 [ 680.842255] pci_stop_bus_device+0x2b/0xa0 [ 680.842722] pci_stop_bus_device+0x3d/0xa0 [ 680.843189] pci_stop_and_remove_bus_device+0xe/0x20 [ 680.843627] trim_stale_devices+0xf3/0x140 [ 680.844086] trim_stale_devices+0x94/0x140 [ 680.844532] trim_stale_devices+0xa6/0x140 [ 680.845031] ? get_slot_status+0x90/0xc0 [ 680.845536] acpiphp_check_bridge.part.5+0xfe/0x140 [ 680.846021] acpiphp_hotplug_notify+0x175/0x200 [ 680.846581] ? free_bridge+0x100/0x100 [ 680.847113] acpi_device_hotplug+0x8a/0x490 [ 680.847535] acpi_hotplug_work_fn+0x1a/0x30 [ 680.848076] process_one_work+0x182/0x3a0 [ 680.848543] worker_thread+0x2e/0x380 [ 680.848963] ? process_one_work+0x3a0/0x3a0 [ 680.849373] kthread+0x111/0x130 [ 680.849776] ? kthread_create_worker_on_cpu+0x50/0x50 [ 680.850188] ret_from_fork+0x1f/0x30 [ 680.850601] Code: 43 14 85 c0 0f 84 d5 fe ff ff 31 ed eb 0f 83 c5 01 39 6b 14 0f 86 c5 fe ff ff 8b 7b 10 01 ef e8 b7 e4 d2 ff 48 83 78 70 00 74 e3 <0f> 0b 49 8d b5 a0 00 00 00 e8 62 6f d3 ff e9 c7 fe ff ff 48 8b [ 680.851497] RIP: free_msi_irqs+0x180/0x1b0 RSP: ffffc9000030fbf0 As it turns out, normally the freeing of IRQs that would fix this is called inside of the scope of __igb_close(). However, since the device is already gone by the point we try to unregister the netdevice from the driver due to a hotplug we end up seeing that the netif isn't present and thus, forget to free any of the device IRQs. So: make sure that if we're in the process of dismantling the netdev, we always allow __igb_close() to be called so that IRQs may be freed normally. Additionally, only allow igb_close() to be called from __igb_close() if it hasn't already been called for the given adapter. Signed-off-by: NLyude Paul <lyude@redhat.com> Fixes: 9474933c ("igb: close/suspend race in netif_device_detach") Cc: Todd Fujinaka <todd.fujinaka@intel.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: stable@vger.kernel.org Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Matt Turner 提交于
I personally spent a long time trying to decypher why my CPU would not reach deeper C-states. Let's just tell the next user what's going on. Signed-off-by: NMatt Turner <matt.turner@intel.com> Acked-by: NShannon Nelson <shannon.nelson@oracle.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesus Sanchez-Palencia 提交于
By design, the idleslope increments are restricted to 16.384kbps steps. Add a comment to igb_main.c making that explicit and add one example that illustrates the impact of that. Signed-off-by: NJesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Matt Turner 提交于
According to section 12.0.3.4.13 "Receive Descriptor Control - RXDCTL" of the Intel® 82579 Gigabit Ethernet PHY Datasheet v2.1: "HTHRESH should be given a non zero value when ever PTHRESH is used." In RXDCTL(0), PTHRESH lives at bits 5:0, and HTHREST lives at bits 13:8. Set only bit 8 of HTHREST as is done in e1000_flush_rx_ring(). Found by inspection. Signed-off-by: NMatt Turner <matt.turner@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Zhang Shengju 提交于
This patch adds a new function igb_get_max_rss_queues() to get maximum RSS queues, this will reduce duplicate code and facilitate future maintenance. Signed-off-by: NZhang Shengju <zhangshengju@cmss.chinamobile.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Corinna Vinschen 提交于
Before libvirt modifies the MAC address and vlan tag for an SRIOV VF for use by a virtual machine (either using vfio device assignment or macvtap passthru mode), it saves the current MAC address and vlan tag so that it can reset them to their original value when the guest is done. Libvirt can't leave the VF MAC set to the value used by the now-defunct guest since it may be started again later using a different VF, but it certainly shouldn't just pick any random value, either. So it saves the state of everything prior to using the VF, and resets it to that. The igb driver initializes the MAC addresses of all VFs to 00:00:00:00:00:00, and reports that when asked (via an RTM_GETLINK netlink message, also visible in the list of VFs in the output of "ip link show"). But when libvirt attempts to restore the MAC address back to 00:00:00:00:00:00 (using an RTM_SETLINK netlink message) the kernel responds with "Invalid argument". Forbidding a reset back to the original value leaves the VF MAC at the value set for the now-defunct virtual machine. Especially on a system with NetworkManager enabled, this has very bad consequences, since NetworkManager forces all interfacess to be IFF_UP all the time - if the same virtual machine is restarted using a different VF (or even on a different host), there will be multiple interfaces watching for traffic with the same MAC address. To allow libvirt to revert to the original state, we need a way to remove the administrative set MAC on a VF, to allow normal host operation again, and to reset/overwrite the VF MAC via VF netdev. This patch implements the outlined scenario by allowing to set the VF MAC to 00:00:00:00:00:00 via RTM_SETLINK on the PF. igb_ndo_set_vf_mac resets the IGB_VF_FLAG_PF_SET_MAC flag to 0, so it's possible to reset the VF MAC back to the original value via the VF netdev. Note: Recent patches to libvirt allow for a workaround if the NIC isn't capable of resetting the administrative MAC back to all 0, but in theory the NIC should allow resetting the MAC in the first place. Signed-off-by: NCorinna Vinschen <vinschen@redhat.com> Tested-by: NAaron Brown <arron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 David S. Miller 提交于
Dmitry Safonov says: ==================== pktgen: Behavior flags fixes v2: o fixed a nitpick from David Miller There are a bunch of fixes/cleanups/Documentations. Diffstat says for itself, regardless added docs and missed flag parameters. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dmitry Safonov 提交于
Don't use error-prone-brute-force way. Signed-off-by: NDmitry Safonov <dima@arista.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dmitry Safonov 提交于
Add macro generated pkt_flag_names array, with a little help of which the flags can be printed by using an index. Signed-off-by: NDmitry Safonov <dima@arista.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dmitry Safonov 提交于
PKT_FALGS macro will be used to add package behavior names definitions to simplify the code that prints/reads pkg flags. Sorted the array in order of printing the flags in pktgen_if_show() Note: Renamed IPSEC_ON => IPSEC for simplicity. No visible behavior change expected. Signed-off-by: NDmitry Safonov <dima@arista.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dmitry Safonov 提交于
o FLOW_SEQ now can be disabled with pgset "flag !FLOW_SEQ" o FLOW_SEQ and FLOW_RND are antonyms, as it's shown by pktgen_if_show() o IPSEC now may be disabled Note, that IPV6 is enabled with dst6/src6 parameters, not with a flag parameter. Signed-off-by: NDmitry Safonov <dima@arista.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dmitry Safonov 提交于
o Change process name in ps output: looks like, these days the process is named kpktgend_<cpu>, rather than pktgen/<cpu>. o Use pg_ctrl for start/stop as it can work well with pgset without changes to $(PGDEV) variable. o Clarify a bit needed $(PGDEV) definition for sample scripts and that one needs to `source functions.sh`. o Document how-to unset a behaviour flag, note about history expansion. o Fix pgset spi parameter value. Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-doc@vger.kernel.org Signed-off-by: NDmitry Safonov <dima@arista.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 1月, 2018 27 次提交
-
-
由 David S. Miller 提交于
Rahul Lakkireddy says: ==================== cxgb4: fix build error Patch 1 fixes build error with compiling cudbg_zlib.c when CONFIG_ZLIB_DEFLATE macro is not defined. Patch 2 fixes following sparse warning: "Using plain integer as NULL pointer" ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rahul Lakkireddy 提交于
memset variables to 0 to fix sparse warnings: drivers/net/ethernet/chelsio/cxgb4/cxgb4_cudbg.c:409:42: sparse: Using plain integer as NULL pointer drivers/net/ethernet/chelsio/cxgb4/cudbg_zlib.c:43:47: sparse: Using plain integer as NULL pointer Fixes: ad75b7d3 ("cxgb4: implement ethtool dump data operations") Fixes: 91c1953d ("cxgb4: use zlib deflate to compress firmware dump") Signed-off-by: NRahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rahul Lakkireddy 提交于
Fixes: drivers/net/ethernet/chelsio/cxgb4/cudbg_zlib.c:39:5: error: redefinition of 'cudbg_compress_buff' int cudbg_compress_buff(struct cudbg_init *pdbg_init, ^~~~~~~~~~~~~~~~~~~ In file included from drivers/net/ethernet/chelsio/cxgb4/cudbg_zlib.c:23:0: drivers/net/ethernet/chelsio/cxgb4/cudbg_zlib.h:45:19: note: previous definition of 'cudbg_compress_buff' was here static inline int cudbg_compress_buff(struct cudbg_init *pdbg_init, ^~~~~~~~~~~~~~~~~~~ Fixes: 91c1953d ("cxgb4: use zlib deflate to compress firmware dump") Signed-off-by: NRahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Ursula Braun says: ==================== net/smc: socket closing improvements while the first 2 patches are just small cleanups, the remaing patches affect socket closing. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ursula Braun 提交于
If the peer sends a shutdown WRITE, this should not affect sending in general, and waiting for send buffer space in particular. Stop waiting of the local socket for send buffer space only, if peer signals closing, but not if peer signals just shutdown WRITE. Signed-off-by: NUrsula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ursula Braun 提交于
When a socket is closed or shutdown, smc waits for data being transmitted in certain states. If the state changes during this wait, the close switch depending on state should be reentered. In addition, state change is avoided if sending of close or shutdown fails. Signed-off-by: NUrsula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ursula Braun 提交于
Work requests are needed for every ib_post_send(), among them the ib_post_send() to signal closing. If an smc socket program is cancelled, the smc connections should be cleaned up, and require sending of closing signals to the peer. This may fail, if a wait for a free work request is needed, but is cancelled immediately due to the cancel interrupt. To guarantee notification of the peer, the wait for a work request is changed to uninterruptible. And the area to receive work request completion info with ib_poll_cq() is cleared first. And _tx_ variable names are used in the _tx_routines for the demultiplexing common type in the header. Signed-off-by: NUrsula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ursula Braun 提交于
There is no need to wait for confirmation of pending tx requests for a closing connection, since pending tx slots are dismissed when finishing a connection. Signed-off-by: NUrsula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ursula Braun 提交于
Cleanup to avoid duplicate code in smc_clcsock_accept(). No functional change. Signed-off-by: NUrsula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ursula Braun 提交于
Cleanup to consistently exploit the local struct sock definitions. No functional change. Signed-off-by: NUrsula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ganesh Goudar 提交于
implement ndo_set_vf_vlan for mgmt netdevice to configure the PCIe VF. Original work by: Casey Leedom <leedom@chelsio.com> Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Jakub Kicinski says: ==================== bpf and netdevsim test updates A number of test improvements (delayed by merges). Quentin provides patches for checking printing to the verifier log from the drivers and validating extack messages are propagated. There is also a test for replacing TC filters to avoid adding back the bug Daniel recently fixed in net and stable. ==================== Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jakub Kicinski 提交于
Daniel discovered recently I broke TC filter replace (and fixed it in commit ad9294db ("bpf: fix cls_bpf on filter replace")). Add a test to make sure it never happens again. Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Quentin Monnet 提交于
Make netdevsim print a message to the BPF verifier log buffer when a program is offloaded. Then use this message in hardware offload selftests to make sure that using this buffer actually prints the message to the console for eBPF hardware offload. The message is appended after the last instruction is processed with the verifying function from netdevsim. Output looks like the following: $ tc filter add dev foo ingress bpf obj sample_ret0.o \ sec .text verbose skip_sw Prog section '.text' loaded (5)! - Type: 3 - Instructions: 2 (0 over limit) - License: Verifier analysis: 0: (b7) r0 = 0 1: (95) exit [netdevsim] Hello from netdevsim! processed 2 insns, stack depth 0 "verbose" flag is required to see it in the console since netdevsim does not throw an error after printing the message. Signed-off-by: NQuentin Monnet <quentin.monnet@netronome.com> Reviewed-by: NJakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jakub Kicinski 提交于
We should not compile netdevsim/bpf.c if BPF syscall is not enabled. Otherwise bpf core would have to provide wrappers for all functions offload drivers may call, even though system will never see a BPF object. Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: NQuentin Monnet <quentin.monnet@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Quentin Monnet 提交于
Add checks to test that netlink extack messages are correctly displayed in some expected error cases for eBPF offload to netdevsim with TC and XDP. iproute2 may be built without libmnl support, in which case the extack messages will not be reported. Try to detect this condition, and when enountered print a mild warning to the user and skip the extack validation. Signed-off-by: NQuentin Monnet <quentin.monnet@netronome.com> Reviewed-by: NJakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Quentin Monnet 提交于
Use the recently added extack support for TC eBPF filters in netdevsim. Signed-off-by: NQuentin Monnet <quentin.monnet@netronome.com> Reviewed-by: NJakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue由 David S. Miller 提交于
Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2018-01-23 This series contains updates to i40e and i40evf only. Pawel enables FlatNVM support on x722 devices by allowing nvmupdate tool to configure the preservation flags in the AdminQ command. Mitch fixes a potential divide by zero error when DCB is enabled and the firmware fails to configure the VSI, so check for this state. Fixed a bug where the driver could fail to adhere to ETS bandwidth allocations if 8 traffic classes were configured on the switch. Sudheer fixes a potential deadlock by avoiding to call flush_schedule_work() in i40evf_remove(), since cancel_work_sync() and cancel_delayed_work_sync() already cleans up necessary work items. Fixed an issue with the problematic detection and recovery from hung queues in the PF which was causing lost interrupts. This is done by triggering a software interrupt so that interrupts are forced on and if we are already in napi_poll and an interrupt fires, napi_poll will not be rescheduled and the interrupt is lost. Avinash fixes an issue in the VF where is was possible to issue a reset_task while the device is currently being removed. Michal fixes an issue occurring while calling i40e_led_set() with the blink parameter set to true, which was causing the activity LED instead of the link LED to blink for port identification. Shiraz changes the client interface to not call client close/open on netdev down/up events, since this causes a lot of thrash that is not needed. Instead, disable the PE TCP-ENA flag during a netdev down event and re-enable on a netdev up event, since this blocks all TCP traffic to the RDMA protocol engine. Alan fixes an issue which was causing a potential transmit hang by ignoring the PF link up message if the VF state is not yet in the RUNNING state. Amritha fixes the channel VSI recreation during the reset flow to reconfigure the transmit rings and the queue context associated with the channel VSI. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Davide Caratti says: ==================== net/sched: remove spinlock from 'csum' action Similarly to what has been done earlier with other actions [1][2], this series tries to improve the performance of 'csum' tc action, removing a spinlock in the data path. Patch 1 lets act_csum use per-CPU counters; patch 2 removes spin_{,un}lock_bh() calls from the act() method. test procedure (using pktgen from https://github.com/netoptimizer): # ip link add name eth1 type dummy # ip link set dev eth1 up # tc qdisc add dev eth1 root handle 1: prio # for a in pass drop; do > tc filter del dev eth1 parent 1: pref 10 matchall action csum udp > tc filter add dev eth1 parent 1: pref 10 matchall action csum udp $a > for n in 2 4; do > ./pktgen_bench_xmit_mode_queue_xmit.sh -v -s 64 -t $n -n 1000000 -i eth1 > done > done test results: | | before patch | after patch $a | $n | avg. pps/thread | avg. pps/thread -----+----+-----------------+---------------- pass | 2 | 1671463 ± 4% | 1920789 ± 3% pass | 4 | 648797 ± 1% | 738190 ± 1% drop | 2 | 3212692 ± 2% | 3719811 ± 2% drop | 4 | 1078824 ± 1% | 1328099 ± 1% references: [1] https://www.spinics.net/lists/netdev/msg334760.html [2] https://www.spinics.net/lists/netdev/msg465862.html v3 changes: - use rtnl_dereference() in place of rcu_dereference() in tcf_csum_dump() v2 changes: - add 'drop' test, it produces more contentions - use RCU-protected struct to store 'action' and 'update_flags', to avoid reading the values from subsequent configurations ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Davide Caratti 提交于
use RCU instead of spin_{,unlock}_bh() to protect concurrent read/write on act_csum configuration, to reduce the effects of contention in the data path when multiple readers are present. Signed-off-by: NDavide Caratti <dcaratti@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Davide Caratti 提交于
use per-CPU counters, like other TC actions do, instead of maintaining one set of stats across all cores. This allows updating act_csum stats without the need of protecting them using spin_{,un}lock_bh() invocations. Signed-off-by: NDavide Caratti <dcaratti@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Roopa Prabhu 提交于
It takes 1sec for bond link down notification to hit user-space when all slaves of the bond go down. 1sec is too long for protocol daemons in user-space relying on bond notification to recover (eg: multichassis lag implementations in user-space). Since the link event code already marks team device port link events as urgent, this patch moves the code to cover all lag ports and master. Signed-off-by: NRoopa Prabhu <roopa@cumulusnetworks.com> Acked-by: NJiri Pirko <jiri@mellanox.com> Reviewed-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue由 David S. Miller 提交于
Jeff Kirsher says: ==================== 10GbE Intel Wired LAN Driver Updates 2018-01-23 This series contains updates to ixgbe only. Shannon Nelson provides an implementation of the ipsec hardware offload feature for the ixgbe driver for these devices: x540, x550, 82599. The ixgbe NICs support ipsec offload for 1024 Rx and 1024 Tx Security Associations (SAs), using up to 128 inbound IP addresses, and using the rfc4106(gcm(aes)) encryption. This code does not yet support checksum offload, or TSO in conjunction with the ipsec offload - those will be added in the future. This code shows improvements in both packet throughput and CPU utilization. For example, here are some quicky numbers that show the magnitude of the performance gain on a single run of "iperf -c <dest>" with the ipsec offload on both ends of a point-to-point connection: 9.4 Gbps - normal case 7.6 Gbps - ipsec with offload 343 Mbps - ipsec no offload ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Sebastian Reichel says: ==================== GEHC Bx50 Switch Support This adds support for the internal switch found in GE Healthcare B450v3, B650v3 and B850v3. All devices use a GPIO bitbanged MDIO bus to communicate with the switch and a PCIe based network card for exchanging network data. The cpu network data link requires, that the switch's internal phy interface is enabled, so support for that is added by the first patch in this series. The patch series is based on v4.15-rc8. Changes since PATCHv4: * Introduce dsa_port_link_(un)register_of and mark the fixed variant static. * Update patch description to describe the phy<->phy connection from i210 to the Marvell switch Changes since PATCHv3: * Enable the phy in dsa_port_setup() instead of abusing the fixed link setup function Changes since PATCHv2: * Add phy nodes to switch in bx50.dtsi and reference them from switch ports * Enable cpu-port's phy based on 'phy-handle' instead of 'phy-mode' Changes since PATCHv1: * Use 'marvell,mv88e6085' instead of introducing compatible string for mv88e6240. * Fix indention of DT nodes * Only enable 'cpu' phy, if explicitly set to "internal". ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sebastian Reichel 提交于
This adds support for the Marvell switch and names the network ports according to the labels, that can be found next to the connectors. The switch is connected to the host system using a PCI based network card. The PCI bus configuration has been written using the following information: root@b450v3# lspci -tv -[0000:00]---00.0-[01]----00.0 Intel Corporation I210 Gigabit Network Connection root@b450v3# lspci -nn 00:00.0 PCI bridge [0604]: Synopsys, Inc. Device [16c3:abcd] (rev 01) 01:00.0 Ethernet controller [0200]: Intel Corporation I210 Gigabit Network Connection [8086:1533] (rev 03) Signed-off-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sebastian Reichel 提交于
This adds support for the Marvell switch and names the network ports according to the labels, that can be found next to the connectors. The switch is connected to the host system using a PCI based network card. The PCI bus configuration has been written using the following information: root@b650v3# lspci -tv -[0000:00]---00.0-[01]----00.0 Intel Corporation I210 Gigabit Network Connection root@b650v3# lspci -nn 00:00.0 PCI bridge [0604]: Synopsys, Inc. Device [16c3:abcd] (rev 01) 01:00.0 Ethernet controller [0200]: Intel Corporation I210 Gigabit Network Connection [8086:1533] (rev 03) Signed-off-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sebastian Reichel 提交于
This adds support for the Marvell switch and names the network ports according to the labels, that can be found next to the connectors ("ID", "IX", "ePort 1", "ePort 2"). The switch is connected to the host system using a PCI based network card. The PCI bus configuration has been written using the following information: root@b850v3# lspci -tv -[0000:00]---00.0-[01]----00.0-[02-05]--+-01.0-[03]----00.0 Intel Corporation I210 Gigabit Network Connection +-02.0-[04]----00.0 Intel Corporation I210 Gigabit Network Connection \-03.0-[05]-- root@b850v3# lspci -nn 00:00.0 PCI bridge [0604]: Synopsys, Inc. Device [16c3:abcd] (rev 01) 01:00.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8605 PCI Express 4-port Gen2 Switch [10b5:8605] (rev ab) 02:01.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8605 PCI Express 4-port Gen2 Switch [10b5:8605] (rev ab) 02:02.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8605 PCI Express 4-port Gen2 Switch [10b5:8605] (rev ab) 02:03.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8605 PCI Express 4-port Gen2 Switch [10b5:8605] (rev ab) 03:00.0 Ethernet controller [0200]: Intel Corporation I210 Gigabit Network Connection [8086:1533] (rev 03) 04:00.0 Ethernet controller [0200]: Intel Corporation I210 Gigabit Network Connection [8086:1533] (rev 03) Signed-off-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-