Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 20 2月, 2013 16 次提交
  3. 01 2月, 2013 6 次提交
  5. 31 1月, 2013 18 次提交
    • A
      MIPS: Function tracer: Fix broken function tracing · 58b69401
      由 Al Cooper 提交于 
      Function tracing is currently broken for all 32 bit MIPS platforms.
When tracing is enabled, the kernel immediately hangs on boot.
This is a result of commit b732d439
that changes the kernel/trace/Kconfig file so that is no longer
forces FRAME_POINTER when FUNCTION_TRACING is enabled.

MIPS frame pointers are generally considered to be useless because
they cannot be used to unwind the stack. Unfortunately the MIPS
function tracing code has bugs that are masked by the use of frame
pointers. This commit fixes the bugs so that MIPS frame pointers
don't need to be enabled.

The bugs are a result of the odd calling sequence used to call the trace
routine. This calling sequence is inserted into every traceable function
when the tracing CONFIG option is enabled. This sequence is generated
for 32bit MIPS platforms by the compiler via the "-pg" flag.

Part of the sequence is "addiu sp,sp,-8" in the delay slot after every
call to the trace routine "_mcount" (some legacy thing where 2 arguments
used to be pushed on the stack). The _mcount routine is expected to
adjust the sp by +8 before returning.  So when not disabled, the original
jalr and addiu will be there, so _mcount has to adjust sp.

The problem is that when tracing is disabled for a function, the
"jalr _mcount" instruction is replaced with a nop, but the
"addiu sp,sp,-8" is still executed and the stack pointer is left
trashed. When frame pointers are enabled the problem is masked
because any access to the stack is done through the frame
pointer and the stack pointer is restored from the frame pointer when
the function returns.

This patch writes two nops starting at the address of the "jalr _mcount"
instruction whenever tracing is disabled. This means that the
"addiu sp,sp.-8" will be converted to a nop along with the "jalr".  When
disabled, there will be two nops.

This is SMP safe because the first time this happens is during
ftrace_init() which is before any other processor has been started.
Subsequent calls to enable/disable tracing when other CPUs ARE running
will still be safe because the enable will only change the first nop
to a "jalr" and the disable, while writing 2 nops, will only be changing
the "jalr". This patch also stops using stop_machine() to call the
tracer enable/disable routines and calls them directly because the
routines are SMP safe.

When the kernel first boots we have to be able to handle the gcc
generated jalr, addui sequence until ftrace_init gets a chance to run
and change the sequence. At this point mcount just adjusts the stack
and returns. When ftrace_init runs, we convert the jalr/addui to nops.
Then whenever tracing is enabled we convert the first nop to a "jalr
mcount+8". The mcount+8 entry point skips the stack adjust.

[ralf@linux-mips.org: Folded in  Steven Rostedt's build fix.]
Signed-off-by: NAl Cooper <alcooperx@gmail.com>
Cc: rostedt@goodmis.org
Cc: ddaney.cavm@gmail.com
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/4806/
Patchwork: https://patchwork.linux-mips.org/patch/4841/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      58b69401
    • A
      dm: fix write same requests counting · fe7af2d3
      由 Alasdair G Kergon 提交于 
      When processing write same requests, fix dm to send the configured
number of WRITE SAME requests to the target rather than the number of
discards, which is not always the same.

Device-mapper WRITE SAME support was introduced by commit
23508a96 ("dm: add WRITE SAME support").
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
Acked-by: NMike Snitzer <snitzer@redhat.com>
      fe7af2d3
    • S
      mips: Move __virt_addr_valid() to a place for MIPS 64 · 196897a2
      由 Steven Rostedt 提交于 
      Commit d3ce8843 "MIPS: Fix modpost error in modules attepting to use
virt_addr_valid()" moved __virt_addr_valid() from a macro in a header
file to a function in ioremap.c. But ioremap.c is only compiled for MIPS
32, and not for MIPS 64.

When compiling for my yeeloong2, which supposedly supports hibernation,
which compiles kernel/power/snapshot.c which calls virt_addr_valid(), I
got this error:

  LD      init/built-in.o
kernel/built-in.o: In function `memory_bm_free':
snapshot.c:(.text+0x4c9c4): undefined reference to `__virt_addr_valid'
snapshot.c:(.text+0x4ca58): undefined reference to `__virt_addr_valid'
kernel/built-in.o: In function `snapshot_write_next':
(.text+0x4e44c): undefined reference to `__virt_addr_valid'
kernel/built-in.o: In function `snapshot_write_next':
(.text+0x4e890): undefined reference to `__virt_addr_valid'
make[1]: *** [vmlinux] Error 1
make: *** [sub-make] Error 2

I suspect that __virt_addr_valid() is fine for mips 64. I moved it to
mmap.c such that it gets compiled for mips 64 and 32.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/4842/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      196897a2
    • M
      dm thin: fix queue limits stacking · 0f640dca
      由 Mike Snitzer 提交于 
      thin_io_hints() is blindly copying the queue limits from the thin-pool
which can lead to incorrect limits being set.  The fix here simply
deletes the thin_io_hints() hook which leaves the existing stacking
infrastructure to set the limits correctly.

When a thin-pool uses an MD device for the data device a thin device
from the thin-pool must respect MD's constraints about disallowing a bio
from spanning multiple chunks.  Otherwise we can see problems.  If the raid0
chunksize is 1152K and thin-pool chunksize is 256K I see the following
md/raid0 error (with extra debug tracing added to thin_endio) when
mkfs.xfs is executed against the thin device:

md/raid0:md99: make_request bug: can't convert block across chunks or bigger than 1152k 6688 127
device-mapper: thin: bio sector=2080 err=-5 bi_size=130560 bi_rw=17 bi_vcnt=32 bi_idx=0

This extra DM debugging shows that the failing bio is spanning across
the first and second logical 1152K chunk (sector 2080 + 255 takes the
bio beyond the first chunk's boundary of sector 2304).  So the bio
splitting that DM is doing clearly isn't respecting the MD limits.

max_hw_sectors_kb is 127 for both the thin-pool and thin device
(queue_max_hw_sectors returns 255 so we'll excuse sysfs's lack of
precision).  So this explains why bi_size is 130560.

But the thin device's max_hw_sectors_kb should be 4 (PAGE_SIZE) given
that it doesn't have a .merge function (for bio_add_page to consult
indirectly via dm_merge_bvec) yet the thin-pool does sit above an MD
device that has a compulsory merge_bvec_fn.  This scenario is exactly
why DM must resort to sending single PAGE_SIZE bios to the underlying
layer. Some additional context for this is available in the header for
commit 8cbeb67a ("dm: avoid unsupported spanning of md stripe boundaries").

Long story short, the reason a thin device doesn't properly get
configured to have a max_hw_sectors_kb of 4 (PAGE_SIZE) is that
thin_io_hints() is blindly copying the queue limits from the thin-pool
device directly to the thin device's queue limits.

Fix this by eliminating thin_io_hints.  Doing so is safe because the
block layer's queue limits stacking already enables the upper level thin
device to inherit the thin-pool device's discard and minimum_io_size and
optimal_io_size limits that get set in pool_io_hints.  But avoiding the
queue limits copy allows the thin and thin-pool limits to be different
where it is important, namely max_hw_sectors_kb.
Reported-by: NDaniel Browning <db@kavod.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
      0f640dca
    • L
      Merge branch 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · 04c2eee5
      由 Linus Torvalds 提交于 
      Pull x86 EFI fixes from Peter Anvin:
 "This is a collection of fixes for the EFI support.  The controversial
  bit here is a set of patches which bumps the boot protocol version as
  part of fixing some serious problems with the EFI handover protocol,
  used when booting under EFI using a bootloader as opposed to directly
  from EFI.  These changes should also make it a lot saner to support
  cross-mode 32/64-bit EFI booting in the future.  Getting these changes
  into 3.8 means we avoid presenting an inconsistent ABI to bootloaders.

  Other changes are display detection and fixing efivarfs."

* 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, efi: remove attribute check from setup_efi_pci
  x86, build: Dynamically find entry points in compressed startup code
  x86, efi: Fix PCI ROM handing in EFI boot stub, in 32-bit mode
  x86, efi: Fix 32-bit EFI handover protocol entry point
  x86, efi: Fix display detection in EFI boot stub
  x86, boot: Define the 2.12 bzImage boot protocol
  x86/boot: Fix minor fd leakage in tools/relocs.c
  x86, efi: Set runtime_version to the EFI spec revision
  x86, efi: fix 32-bit warnings in setup_efi_pci()
  efivarfs: Delete dentry from dcache in efivarfs_file_write()
  efivarfs: Never return ENOENT from firmware
  efi, x86: Pass a proper identity mapping in efi_call_phys_prelog
  efivarfs: Drop link count of the right inode
      04c2eee5
    • L
      Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · bdb0ae6a
      由 Linus Torvalds 提交于 
      Pull x86 fixes from Peter Anvin:
 "This is a collection of miscellaneous fixes, the most important one is
  the fix for the Samsung laptop bricking issue (auto-blacklisting the
  samsung-laptop driver); the efi_enabled() changes you see below are
  prerequisites for that fix.

  The other issues fixed are booting on OLPC XO-1.5, an UV fix, NMI
  debugging, and requiring CAP_SYS_RAWIO for MSR references, just as
  with I/O port references."

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  samsung-laptop: Disable on EFI hardware
  efi: Make 'efi_enabled' a function to query EFI facilities
  smp: Fix SMP function call empty cpu mask race
  x86/msr: Add capabilities check
  x86/dma-debug: Bump PREALLOC_DMA_DEBUG_ENTRIES
  x86/olpc: Fix olpc-xo1-sci.c build errors
  arch/x86/platform/uv: Fix incorrect tlb flush all issue
  x86-64: Fix unwind annotations in recent NMI changes
  x86-32: Start out cr0 clean, disable paging before modifying cr3/4
      bdb0ae6a
    • L
      Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux · 0fe94b9e
      由 Linus Torvalds 提交于 
      Pull console lockdep checking revert from Dave Airlie.

The lockdep splat this showed was interesting, but it's very very old,
and we won't be fixing it until 3.9.  In the meantime, undo the lockdep
annotation so that we don't generate the (known) console lockdep issue,
and then possibly hide any potential other (unknown) lockdep problems
that got disabled by the first one that triggered.

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  Revert "console: implement lockdep support for console_lock"
      0fe94b9e
    • D
      Revert "console: implement lockdep support for console_lock" · ff0d05bf
      由 Dave Airlie 提交于 
      This reverts commit daee7797.

I'll requeue this after the console locking fixes, so lockdep
is useful again for people until fbcon is fixed.
Signed-off-by: NDave Airlie <airlied@redhat.com>
      ff0d05bf
    • T
      NFSv4.1: Handle NFS4ERR_DELAY when resetting the NFSv4.1 session · c489ee29
      由 Trond Myklebust 提交于 
      NFS4ERR_DELAY is a legal reply when we call DESTROY_SESSION. It
usually means that the server is busy handling an unfinished RPC
request. Just sleep for a second and then retry.
We also need to be able to handle the NFS4ERR_BACK_CHAN_BUSY return
value. If the NFS server has outstanding callbacks, we just want to
similarly sleep & retry.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@vger.kernel.org
      c489ee29
    • T
      SUNRPC: When changing the queue priority, ensure that we change the owner · edd2e36f
      由 Trond Myklebust 提交于 
      This fixes a livelock in the xprt->sending queue where we end up never
making progress on lower priority tasks because sleep_on_priority()
keeps adding new tasks with the same owner to the head of the queue,
and priority bumps mean that we keep resetting the queue->owner to
whatever task is at the head of the queue.

Regression introduced by commit c05eecf6
(SUNRPC: Don't allow low priority tasks to pre-empt higher priority ones).
Reported-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
      edd2e36f
    • H
      Merge tag 'efi-for-3.8' into x86/efi · becbd660
      由 H. Peter Anvin 提交于 
      Various urgent EFI fixes and some warning cleanups for v3.8

  * EFI boot stub fix for Macbook Pro's from Maarten Lankhorst
  * Fix an oops in efivarfs from Lingzhu Xiang
  * 32-bit warning cleanups from Jan Beulich
  * Patch to Boot on >512GB RAM systems from Nathan Zimmer
  * Set efi.runtime_version correctly
  * efivarfs updates
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
      becbd660
    • T
      NFS: Don't silently fail setattr() requests on mountpoints · ab225417
      由 Trond Myklebust 提交于 
      Ensure that any setattr and getattr requests for junctions and/or
mountpoints are sent to the server. Ever since commit
0ec26fd0 (vfs: automount should ignore LOOKUP_FOLLOW), we have
silently dropped any setattr requests to a server-side mountpoint.
For referrals, we have silently dropped both getattr and setattr
requests.

This patch restores the original behaviour for setattr on mountpoints,
and tries to do the same for referrals, provided that we have a
filehandle...
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@vger.kernel.org
      ab225417
    • J
      MIPS: Netlogic: Fix UP compilation on XLR · 26f5ae86
      由 Jayachandran C 提交于 
      The commit 2a37b1ae "MIPS: Netlogic: Move from u32 cpumask to cpumask_t"
breaks uniprocessor compilation on XLR with:

arch/mips/netlogic/xlr/setup.c: In function 'prom_init':
arch/mips/netlogic/xlr/setup.c:196:6: error: unused variable 'i'

Fix by defining 'i' only when CONFIG_SMP is defined.
Signed-off-by: NJayachandran C <jchandra@broadcom.com>
Patchwork: http://patchwork.linux-mips.org/patch/4760/Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      26f5ae86
    • G
      MIPS: AR71xx: Fix AR71XX_PCI_MEM_SIZE · fe950df7
      由 Gabor Juhos 提交于 
      The base address of the PCI memory is 0x10000000 and the base address of the
PCI configuration space is 0x17000000 on the AR71xx SoCs.

The AR71XX_PCI_MEM_SIZE is defined as 0x08000000 which is wrong because that
overlaps with the configuration space.  This patch fixes the value of the
AR71XX_PCI_MEM_SIZE constant, in order to avoid this resource conflicts.
Signed-off-by: NGabor Juhos <juhosg@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/4873/Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      fe950df7
    • G
      MIPS: AR724x: Fix AR724X_PCI_MEM_SIZE · 4c960910
      由 Gabor Juhos 提交于 
      The base address of the PCI memory is
0x10000000 and the base address of the
PCI configuration space is 0x14000000
on the AR724x SoCs.

The AR724X_PCI_MEM_SIZE is defined as
0x08000000 which is wrong because that
overlaps  with the configuration space.

The patch fixes the value of the
AR724X_PCI_MEM_SIZE constant, in order
to avoid this resource conflicts.
Signed-off-by: NGabor Juhos <juhosg@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/4872/Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      4c960910
    • J
      MIPS: Lantiq: Fix cp0_perfcount_irq mapping · 79d61a04
      由 John Crispin 提交于 
      The introduction of the OF support broke the cp0_perfcount_irq mapping. This
resulted in oprofile not working anymore.

Offending commit is :

commit 3645da02
Author: John Crispin <blogic@openwrt.org>
Date:   Tue Apr 17 10:18:32 2012 +0200

OF: MIPS: lantiq: implement irq_domain support
Signed-off-by: NConor O'Gorman <i@conorogorman.net>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/4875/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      79d61a04
    • M
      samsung-laptop: Disable on EFI hardware · e0094244
      由 Matt Fleming 提交于 
      It has been reported that running this driver on some Samsung laptops
with EFI can cause those machines to become bricked as detailed in the
following report,

	https://bugs.launchpad.net/ubuntu-cdimage/+bug/1040557

There have also been reports of this driver causing Machine Check
Exceptions on recent EFI-enabled Samsung laptops,

	https://bugzilla.kernel.org/show_bug.cgi?id=47121

So disable it if booting from EFI since this driver relies on
grovelling around in the BIOS memory map which isn't going to work.

Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Steve Langasek <steve.langasek@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
      e0094244
    • M
      efi: Make 'efi_enabled' a function to query EFI facilities · 83e68189
      由 Matt Fleming 提交于 
      Originally 'efi_enabled' indicated whether a kernel was booted from
EFI firmware. Over time its semantics have changed, and it now
indicates whether or not we are booted on an EFI machine with
bit-native firmware, e.g. 64-bit kernel with 64-bit firmware.

The immediate motivation for this patch is the bug report at,

    https://bugs.launchpad.net/ubuntu-cdimage/+bug/1040557

which details how running a platform driver on an EFI machine that is
designed to run under BIOS can cause the machine to become
bricked. Also, the following report,

    https://bugzilla.kernel.org/show_bug.cgi?id=47121

details how running said driver can also cause Machine Check
Exceptions. Drivers need a new means of detecting whether they're
running on an EFI machine, as sadly the expression,

    if (!efi_enabled)

hasn't been a sufficient condition for quite some time.

Users actually want to query 'efi_enabled' for different reasons -
what they really want access to is the list of available EFI
facilities.

For instance, the x86 reboot code needs to know whether it can invoke
the ResetSystem() function provided by the EFI runtime services, while
the ACPI OSL code wants to know whether the EFI config tables were
mapped successfully. There are also checks in some of the platform
driver code to simply see if they're running on an EFI machine (which
would make it a bad idea to do BIOS-y things).

This patch is a prereq for the samsung-laptop fix patch.

Cc: David Airlie <airlied@linux.ie>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Peter Jones <pjones@redhat.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Steve Langasek <steve.langasek@canonical.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Konrad Rzeszutek Wilk <konrad@kernel.org>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: <stable@vger.kernel.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
      83e68189