- 18 6月, 2010 7 次提交
-
-
由 Marek Vasut 提交于
Signed-off-by: NMarek Vasut <marek.vasut@gmail.com> Signed-off-by: NEric Miao <eric.y.miao@gmail.com>
-
由 Marek Vasut 提交于
Signed-off-by: NMarek Vasut <marek.vasut@gmail.com> Signed-off-by: NEric Miao <eric.y.miao@gmail.com>
-
由 Marek Vasut 提交于
This patch just moves code around and polishes it. Also, compile in only selected pieces of hardware. Signed-off-by: NMarek Vasut <marek.vasut@gmail.com> Signed-off-by: NEric Miao <eric.y.miao@gmail.com>
-
由 Marek Vasut 提交于
Signed-off-by: NMarek Vasut <marek.vasut@gmail.com> Signed-off-by: NEric Miao <eric.y.miao@gmail.com>
-
由 Marek Vasut 提交于
This patch adds support for the MAX1587A used on Voipac PXA270 board. Signed-off-by: NMarek Vasut <marek.vasut@gmail.com> Signed-off-by: NEric Miao <eric.y.miao@gmail.com>
-
由 Marek Vasut 提交于
Signed-off-by: NMarek Vasut <marek.vasut@gmail.com> Signed-off-by: NEric Miao <eric.y.miao@gmail.com>
-
由 Marek Vasut 提交于
This patch adds a driver for a harddrive attached to PXA address and data bus. Unlike pata_platform, this driver allows usage of PXA DMA controller, making the transmission speed 3x higher. Signed-off-by: NMarek Vasut <marek.vasut@gmail.com> Acked-by: NJeff Garzik <jgarzik@redhat.com> Signed-off-by: NEric Miao <eric.y.miao@gmail.com>
-
- 14 6月, 2010 2 次提交
-
-
由 Eric Miao 提交于
Reported-by: NAndrea Adami <andrea.adami@gmail.com> Signed-off-by: NEric Miao <eric.y.miao@gmail.com>
-
由 Jonathan Cameron 提交于
PMU is not tested and enabled on MMP architecture at this moment, the device IRQ number, IRQ_PMU depends on ARCH_PXA. Build PMU only for ARCH_PXA. Signed-off-by: NJonathan Cameron <jic23@cam.ac.uk> Signed-off-by: NEric Miao <eric.y.miao@gmail.com>
-
- 13 6月, 2010 4 次提交
-
-
由 Robert Jarzmik 提交于
Since commit a48c24a6, the camera is not working anymore. After the v4l2 migration, the mt9m111 camera board information was not passed to the i2c layer anymore, but stored for future use of v4l2 (through soc_camera). Because mioa701_i2c_devices[] was tagged as "__initdata", and because after the v4l2 migration, the new structure "iclink" references it, the mt9m111 driver is not probed anymore, as part of "iclink" is not valid (discarded after kernel init). Although there is not compilation error, nor runtime oops, this patch restores a working camera on the mioa701 board. Signed-off-by: NRobert Jarzmik <robert.jarzmik@free.fr> Acked-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NEric Miao <eric.y.miao@gmail.com>
-
由 Marek Vasut 提交于
This patch fixes flash layout to it's final version. Also, I fixed the authorship information of this file as it's been totally reworked since Ken released his last version. Signed-off-by: NMarek Vasut <marek.vasut@gmail.com> Signed-off-by: NEric Miao <eric.y.miao@gmail.com>
-
由 Marek Vasut 提交于
Remove redundant includes and add slab.h to fix problem with building. Signed-off-by: NMarek Vasut <marek.vasut@gmail.com> Signed-off-by: NEric Miao <eric.y.miao@gmail.com>
-
由 Steve Bennett 提交于
gpio must be int, not u16, otherwise -1 isn't recognised by gpio_is_valid(). Signed-off-by: NSteve Bennett <steveb@workware.net.au> Signed-off-by: NEric Miao <eric.y.miao@gmail.com>
-
- 12 6月, 2010 27 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: wimax/i2400m: fix missing endian correction read in fw loader net8139: fix a race at the end of NAPI pktgen: Fix accuracy of inter-packet delay. pkt_sched: gen_estimator: add a new lock net: deliver skbs on inactive slaves to exact matches ipv6: fix ICMP6_MIB_OUTERRORS r8169: fix mdio_read and update mdio_write according to hw specs gianfar: Revive the driver for eTSEC devices (disable timestamping) caif: fix a couple range checks phylib: Add support for the LXT973 phy. net: Print num_rx_queues imbalance warning only when there are allocated queues
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6由 Linus Torvalds 提交于
* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: PM / x86: Save/restore MISC_ENABLE register
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: The file argument for fsync() is never null Btrfs: handle ERR_PTR from posix_acl_from_xattr() Btrfs: avoid BUG when dropping root and reference in same transaction Btrfs: prohibit a operation of changing acl's mask when noacl mount option used Btrfs: should add a permission check for setfacl Btrfs: btrfs_lookup_dir_item() can return ERR_PTR Btrfs: btrfs_read_fs_root_no_name() returns ERR_PTRs Btrfs: unwind after btrfs_start_transaction() errors Btrfs: btrfs_iget() returns ERR_PTR Btrfs: handle kzalloc() failure in open_ctree() Btrfs: handle error returns from btrfs_lookup_dir_item() Btrfs: Fix BUG_ON for fs converted from extN Btrfs: Fix null dereference in relocation.c Btrfs: fix remap_file_pages error Btrfs: uninitialized data is check_path_shared() Btrfs: fix fallocate regression Btrfs: fix loop device on top of btrfs
-
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: clear bridge resource range if BIOS assigned bad one PCI: hotplug/cpqphp, fix NULL dereference Revert "PCI: create function symlinks in /sys/bus/pci/slots/N/" PCI: change resource collision messages from KERN_ERR to KERN_INFO
-
由 Yinghai Lu 提交于
Yannick found that video does not work with 2.6.34. The cause of this bug was that the BIOS had assigned the wrong range to the PCI bridge above the video device. Before 2.6.34 the kernel would have shrunk the size of the bridge window, but since d65245c3 PCI: don't shrink bridge resources the kernel will avoid shrinking BIOS ranges. So zero out the old range if we fail to claim it at boot time; this will cause us to allocate a new range at startup, restoring the 2.6.34 behavior. Fixes regression https://bugzilla.kernel.org/show_bug.cgi?id=16009. Reported-by: NYannick <yannick.roehlly@free.fr> Acked-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NYinghai Lu <yinghai@kernel.org> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
由 Jiri Slaby 提交于
There are devices out there which are PCI Hot-plug controllers with compaq PCI IDs, but are not bridges, hence have pdev->subordinate NULL. But cpqphp expects the pointer to be non-NULL. Add a check to the probe function to avoid oopses like: BUG: unable to handle kernel NULL pointer dereference at 00000050 IP: [<f82e3c41>] cpqhpc_probe+0x951/0x1120 [cpqphp] *pdpt = 0000000033779001 *pde = 0000000000000000 ... The device here was: 00:0b.0 PCI Hot-plug controller [0804]: Compaq Computer Corporation PCI Hotplug Controller [0e11:a0f7] (rev 11) Subsystem: Compaq Computer Corporation Device [0e11:a2f8] Signed-off-by: NJiri Slaby <jslaby@suse.cz> Cc: Greg KH <greg@kroah.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
由 Jesse Barnes 提交于
This reverts commit 75568f80. Since they're just a convenience anyway, remove these symlinks since they're causing duplicate filename errors in the wild. Acked-by: NAlex Chiang <achiang@canonical.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
由 Bjorn Helgaas 提交于
We can often deal with PCI resource issues by moving devices around. In that case, there's no point in alarming the user with messages like these. There are many bug reports where the message itself is the only problem, e.g., https://bugs.launchpad.net/ubuntu/+source/linux/+bug/413419 . Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
由 Dan Carpenter 提交于
The "file" argument for fsync is never null so we can remove this check. What drew my attention here is that 7ea80859: "drop unused dentry argument to ->fsync" introduced an unconditional dereference at the start of the function and that generated a smatch warning. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Dan Carpenter 提交于
posix_acl_from_xattr() returns both ERR_PTRs and null, but it's OK to pass null values to set_cached_acl() Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Sage Weil 提交于
If btrfs_ioctl_snap_destroy() deletes a snapshot but finishes with end_transaction(), the cleaner kthread may come in and drop the root in the same transaction. If that's the case, the root's refs still == 1 in the tree when btrfs_del_root() deletes the item, because commit_fs_roots() hasn't updated it yet (that happens during the commit). This wasn't a problem before only because btrfs_ioctl_snap_destroy() would commit the transaction before dropping the dentry reference, so the dead root wouldn't get queued up until after the fs root item was updated in the btree. Since it is not an error to drop the root reference and the root in the same transaction, just drop the BUG_ON() in btrfs_del_root(). Signed-off-by: NSage Weil <sage@newdream.net> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Shi Weihua 提交于
when used Posix File System Test Suite(pjd-fstest) to test btrfs, some cases about setfacl failed when noacl mount option used. I simplified used commands in pjd-fstest, and the following steps can reproduce it. ------------------------ # cd btrfs-part/ # mkdir aaa # setfacl -m m::rw aaa <- successed, but not expected by pjd-fstest. ------------------------ I checked ext3, a warning message occured, like as: setfacl: aaa/: Operation not supported Certainly, it's expected by pjd-fstest. So, i compared acl.c of btrfs and ext3. Based on that, a patch created. Fortunately, it works. Signed-off-by: NShi Weihua <shiwh@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Shi Weihua 提交于
On btrfs, do the following ------------------ # su user1 # cd btrfs-part/ # touch aaa # getfacl aaa # file: aaa # owner: user1 # group: user1 user::rw- group::rw- other::r-- # su user2 # cd btrfs-part/ # setfacl -m u::rwx aaa # getfacl aaa # file: aaa # owner: user1 # group: user1 user::rwx <- successed to setfacl group::rw- other::r-- ------------------ but we should prohibit it that user2 changing user1's acl. In fact, on ext3 and other fs, a message occurs: setfacl: aaa: Operation not permitted This patch fixed it. Signed-off-by: NShi Weihua <shiwh@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Dan Carpenter 提交于
btrfs_lookup_dir_item() can return either ERR_PTRs or null. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Dan Carpenter 提交于
btrfs_read_fs_root_no_name() returns ERR_PTRs on error so I added a check for that. It's not clear to me if it can also return NULL pointers or not so I left the original NULL pointer check as is. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Dan Carpenter 提交于
This was added by a22285a6: "Btrfs: Integrate metadata reservation with start_transaction". If we goto out here then we skip all the unwinding and there are locks still held etc. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Dan Carpenter 提交于
btrfs_iget() returns an ERR_PTR() on failure and not null. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Dan Carpenter 提交于
Unwind and return -ENOMEM if the allocation fails here. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Dan Carpenter 提交于
If btrfs_lookup_dir_item() fails, we should can just let the mount fail with an error. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Yan, Zheng 提交于
Tree blocks can live in data block groups in FS converted from extN. So it's easy to trigger the BUG_ON. Signed-off-by: NYan Zheng <zheng.yan@oracle.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Yan, Zheng 提交于
Fix a potential null dereference in relocation.c Signed-off-by: NYan Zheng <zheng.yan@oracle.com> Acked-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Inaky Perez-Gonzalez 提交于
i2400m_fw_hdr_check() was accessing hardware field bcf_hdr->module_type (little endian 32) without converting to host byte sex. Reported-by: NДанилин Михаил <mdanilin@nsg.net.ru> Signed-off-by: NInaky Perez-Gonzalez <inaky@linux.intel.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6由 Linus Torvalds 提交于
* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: kbuild: Create output directory in Makefile.modbuiltin kbuild: Generate modules.builtin in make modules
-
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6由 Linus Torvalds 提交于
* 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: pcmcia: avoid validate_cis failure on CIS override pcmcia: dev_node removal bugfix pcmcia: yenta_socket.c Remove extra #ifdef CONFIG_YENTA_TI pcmcia: only keep saved I365_CSCINT flag if there is no PCI irq
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: ceph: try to send partial cap release on cap message on missing inode ceph: release cap on import if we don't have the inode ceph: fix misleading/incorrect debug message ceph: fix atomic64_t initialization on ia64 ceph: fix lease revocation when seq doesn't match ceph: fix f_namelen reported by statfs ceph: fix memory leak in statfs ceph: fix d_subdirs ordering problem
-