The 'noreplace-paravirt' option disables paravirt patching, leaving the
original pv indirect calls in place.

That's highly incompatible with retpolines, unless we want to uglify
paravirt even further and convert the paravirt calls to retpolines.

As far as I can tell, the option doesn't seem to be useful for much
other than introducing surprising corner cases and making the kernel
vulnerable to Spectre v2.  It was probably a debug option from the early
paravirt days.  So just remove it.
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NJuergen Gross <jgross@suse.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Jun Nakajima <jun.nakajima@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Asit Mallick <asit.k.mallick@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Alok Kataria <akataria@vmware.com>
Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Link: https://lkml.kernel.org/r/20180131041333.2x6blhxirc2kclrq@treble

Flush indirect branches when switching into a process that marked itself
non dumpable. This protects high value processes like gpg better,
without having too high performance overhead.

If done naïvely, we could switch to a kernel idle thread and then back
to the original process, such as:

    process A -> idle -> process A

In such scenario, we do not have to do IBPB here even though the process
is non-dumpable, as we are switching back to the same process after a
hiatus.

To avoid the redundant IBPB, which is expensive, we track the last mm
user context ID. The cost is to have an extra u64 mm context id to track
the last mm we were using before switching to the init_mm used by idle.
Avoiding the extra IBPB is probably worth the extra memory for this
common scenario.

For those cases where tlb_defer_switch_to_init_mm() returns true (non
PCID), lazy tlb will defer switch to init_mm, so we will not be changing
the mm for the process A -> idle -> process A switch. So IBPB will be
skipped for this case.

Thanks to the reviewers and Andy Lutomirski for the suggestion of
using ctx_id which got rid of the problem of mm pointer recycling.
Signed-off-by: NTim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: NDavid Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: ak@linux.intel.com
Cc: karahmed@amazon.de
Cc: arjan@linux.intel.com
Cc: torvalds@linux-foundation.org
Cc: linux@dominikbrodowski.net
Cc: peterz@infradead.org
Cc: bp@alien8.de
Cc: luto@kernel.org
Cc: pbonzini@redhat.com
Cc: gregkh@linux-foundation.org
Link: https://lkml.kernel.org/r/1517263487-3708-1-git-send-email-dwmw@amazon.co.uk

Despite the fact that all the other code there seems to be doing it, just
using set_cpu_cap() in early_intel_init() doesn't actually work.

For CPUs with PKU support, setup_pku() calls get_cpu_cap() after
c->c_init() has set those feature bits. That resets those bits back to what
was queried from the hardware.

Turning the bits off for bad microcode is easy to fix. That can just use
setup_clear_cpu_cap() to force them off for all CPUs.

I was less keen on forcing the feature bits *on* that way, just in case
of inconsistencies. I appreciate that the kernel is going to get this
utterly wrong if CPU features are not consistent, because it has already
applied alternatives by the time secondary CPUs are brought up.

But at least if setup_force_cpu_cap() isn't being used, we might have a
chance of *detecting* the lack of the corresponding bit and either
panicking or refusing to bring the offending CPU online.

So ensure that the appropriate feature bits are set within get_cpu_cap()
regardless of how many extra times it's called.

Fixes: 2961298e ("x86/cpufeatures: Clean up Spectre v2 related CPUID flags")
Signed-off-by: NDavid Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: karahmed@amazon.de
Cc: peterz@infradead.org
Cc: bp@alien8.de
Link: https://lkml.kernel.org/r/1517322623-15261-1-git-send-email-dwmw@amazon.co.uk

Trivial fix to spelling mistake in pr_err error message text.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: kernel-janitors@vger.kernel.org
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lkml.kernel.org/r/20180130193218.9271-1-colin.king@canonical.com

Reflect the presence of get_user(), __get_user(), and 'syscall' protections
in sysfs. The expectation is that new and better tooling will allow the
kernel to grow more usages of array_index_nospec(), for now, only claim
mitigation for __user pointer de-references.
Reported-by: NJiri Slaby <jslaby@suse.cz>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: kernel-hardening@lists.openwall.com
Cc: gregkh@linuxfoundation.org
Cc: torvalds@linux-foundation.org
Cc: alan@linux.intel.com
Link: https://lkml.kernel.org/r/151727420158.33451.11658324346540434635.stgit@dwillia2-desk3.amr.corp.intel.com

Wireless drivers rely on parse_txq_params to validate that txq_params->ac
is less than NL80211_NUM_ACS by the time the low-level driver's ->conf_tx()
handler is called. Use a new helper, array_index_nospec(), to sanitize
txq_params->ac with respect to speculation. I.e. ensure that any
speculation into ->conf_tx() handlers is done with a value of
txq_params->ac that is within the bounds of [0, NL80211_NUM_ACS).
Reported-by: NChristian Lamparter <chunkeey@gmail.com>
Reported-by: NElena Reshetova <elena.reshetova@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NJohannes Berg <johannes@sipsolutions.net>
Cc: linux-arch@vger.kernel.org
Cc: kernel-hardening@lists.openwall.com
Cc: gregkh@linuxfoundation.org
Cc: linux-wireless@vger.kernel.org
Cc: torvalds@linux-foundation.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: alan@linux.intel.com
Link: https://lkml.kernel.org/r/151727419584.33451.7700736761686184303.stgit@dwillia2-desk3.amr.corp.intel.com

'fd' is a user controlled value that is used as a data dependency to
read from the 'fdt->fd' array.  In order to avoid potential leaks of
kernel memory values, block speculative execution of the instruction
stream that could issue reads based on an invalid 'file *' returned from
__fcheck_files.
Co-developed-by: NElena Reshetova <elena.reshetova@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: kernel-hardening@lists.openwall.com
Cc: gregkh@linuxfoundation.org
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: torvalds@linux-foundation.org
Cc: alan@linux.intel.com
Link: https://lkml.kernel.org/r/151727418500.33451.17392199002892248656.stgit@dwillia2-desk3.amr.corp.intel.com

The syscall table base is a user controlled function pointer in kernel
space. Use array_index_nospec() to prevent any out of bounds speculation.

While retpoline prevents speculating into a userspace directed target it
does not stop the pointer de-reference, the concern is leaking memory
relative to the syscall table base, by observing instruction cache
behavior.
Reported-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: kernel-hardening@lists.openwall.com
Cc: gregkh@linuxfoundation.org
Cc: Andy Lutomirski <luto@kernel.org>
Cc: alan@linux.intel.com
Link: https://lkml.kernel.org/r/151727417984.33451.1216731042505722161.stgit@dwillia2-desk3.amr.corp.intel.com

Quoting Linus:

    I do think that it would be a good idea to very expressly document
    the fact that it's not that the user access itself is unsafe. I do
    agree that things like "get_user()" want to be protected, but not
    because of any direct bugs or problems with get_user() and friends,
    but simply because get_user() is an excellent source of a pointer
    that is obviously controlled from a potentially attacking user
    space. So it's a prime candidate for then finding _subsequent_
    accesses that can then be used to perturb the cache.

Unlike the __get_user() case get_user() includes the address limit check
near the pointer de-reference. With that locality the speculation can be
mitigated with pointer narrowing rather than a barrier, i.e.
array_index_nospec(). Where the narrowing is performed by:

	cmp %limit, %ptr
	sbb %mask, %mask
	and %mask, %ptr

With respect to speculation the value of %ptr is either less than %limit
or NULL.
Co-developed-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: Kees Cook <keescook@chromium.org>
Cc: kernel-hardening@lists.openwall.com
Cc: gregkh@linuxfoundation.org
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: torvalds@linux-foundation.org
Cc: alan@linux.intel.com
Link: https://lkml.kernel.org/r/151727417469.33451.11804043010080838495.stgit@dwillia2-desk3.amr.corp.intel.com

Quoting Linus:

    I do think that it would be a good idea to very expressly document
    the fact that it's not that the user access itself is unsafe. I do
    agree that things like "get_user()" want to be protected, but not
    because of any direct bugs or problems with get_user() and friends,
    but simply because get_user() is an excellent source of a pointer
    that is obviously controlled from a potentially attacking user
    space. So it's a prime candidate for then finding _subsequent_
    accesses that can then be used to perturb the cache.

__uaccess_begin_nospec() covers __get_user() and copy_from_iter() where the
limit check is far away from the user pointer de-reference. In those cases
a barrier_nospec() prevents speculation with a potential pointer to
privileged memory. uaccess_try_nospec covers get_user_try.
Suggested-by: NLinus Torvalds <torvalds@linux-foundation.org>
Suggested-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: Kees Cook <keescook@chromium.org>
Cc: kernel-hardening@lists.openwall.com
Cc: gregkh@linuxfoundation.org
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: alan@linux.intel.com
Link: https://lkml.kernel.org/r/151727416953.33451.10508284228526170604.stgit@dwillia2-desk3.amr.corp.intel.com

In preparation for converting some __uaccess_begin() instances to
__uacess_begin_nospec(), make sure all 'from user' uaccess paths are
using the _begin(), _end() helpers rather than open-coded stac() and
clac().

No functional changes.
Suggested-by: NIngo Molnar <mingo@redhat.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: kernel-hardening@lists.openwall.com
Cc: gregkh@linuxfoundation.org
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: torvalds@linux-foundation.org
Cc: alan@linux.intel.com
Link: https://lkml.kernel.org/r/151727416438.33451.17309465232057176966.stgit@dwillia2-desk3.amr.corp.intel.com

For __get_user() paths, do not allow the kernel to speculate on the value
of a user controlled pointer. In addition to the 'stac' instruction for
Supervisor Mode Access Protection (SMAP), a barrier_nospec() causes the
access_ok() result to resolve in the pipeline before the CPU might take any
speculative action on the pointer value. Given the cost of 'stac' the
speculation barrier is placed after 'stac' to hopefully overlap the cost of
disabling SMAP with the cost of flushing the instruction pipeline.

Since __get_user is a major kernel interface that deals with user
controlled pointers, the __uaccess_begin_nospec() mechanism will prevent
speculative execution past an access_ok() permission check. While
speculative execution past access_ok() is not enough to lead to a kernel
memory leak, it is a necessary precondition.

To be clear, __uaccess_begin_nospec() is addressing a class of potential
problems near __get_user() usages.

Note, that while the barrier_nospec() in __uaccess_begin_nospec() is used
to protect __get_user(), pointer masking similar to array_index_nospec()
will be used for get_user() since it incorporates a bounds check near the
usage.

uaccess_try_nospec provides the same mechanism for get_user_try.

No functional changes.
Suggested-by: NLinus Torvalds <torvalds@linux-foundation.org>
Suggested-by: NAndi Kleen <ak@linux.intel.com>
Suggested-by: NIngo Molnar <mingo@redhat.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: kernel-hardening@lists.openwall.com
Cc: gregkh@linuxfoundation.org
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: alan@linux.intel.com
Link: https://lkml.kernel.org/r/151727415922.33451.5796614273104346583.stgit@dwillia2-desk3.amr.corp.intel.com

Rename the open coded form of this instruction sequence from
rdtsc_ordered() into a generic barrier primitive, barrier_nospec().

One of the mitigations for Spectre variant1 vulnerabilities is to fence
speculative execution after successfully validating a bounds check. I.e.
force the result of a bounds check to resolve in the instruction pipeline
to ensure speculative execution honors that result before potentially
operating on out-of-bounds data.

No functional changes.
Suggested-by: NLinus Torvalds <torvalds@linux-foundation.org>
Suggested-by: NAndi Kleen <ak@linux.intel.com>
Suggested-by: NIngo Molnar <mingo@redhat.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: kernel-hardening@lists.openwall.com
Cc: gregkh@linuxfoundation.org
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: alan@linux.intel.com
Link: https://lkml.kernel.org/r/151727415361.33451.9049453007262764675.stgit@dwillia2-desk3.amr.corp.intel.com

array_index_nospec() uses a mask to sanitize user controllable array
indexes, i.e. generate a 0 mask if 'index' >= 'size', and a ~0 mask
otherwise. While the default array_index_mask_nospec() handles the
carry-bit from the (index - size) result in software.

The x86 array_index_mask_nospec() does the same, but the carry-bit is
handled in the processor CF flag without conditional instructions in the
control flow.
Suggested-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: kernel-hardening@lists.openwall.com
Cc: gregkh@linuxfoundation.org
Cc: alan@linux.intel.com
Link: https://lkml.kernel.org/r/151727414808.33451.1873237130672785331.stgit@dwillia2-desk3.amr.corp.intel.com

array_index_nospec() is proposed as a generic mechanism to mitigate
against Spectre-variant-1 attacks, i.e. an attack that bypasses boundary
checks via speculative execution. The array_index_nospec()
implementation is expected to be safe for current generation CPUs across
multiple architectures (ARM, x86).

Based on an original implementation by Linus Torvalds, tweaked to remove
speculative flows by Alexei Starovoitov, and tweaked again by Linus to
introduce an x86 assembly implementation for the mask generation.
Co-developed-by: NLinus Torvalds <torvalds@linux-foundation.org>
Co-developed-by: NAlexei Starovoitov <ast@kernel.org>
Suggested-by: NCyril Novikov <cnovikov@lynx.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: kernel-hardening@lists.openwall.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: gregkh@linuxfoundation.org
Cc: torvalds@linux-foundation.org
Cc: alan@linux.intel.com
Link: https://lkml.kernel.org/r/151727414229.33451.18411580953862676575.stgit@dwillia2-desk3.amr.corp.intel.com

Document the rationale and usage of the new array_index_nospec() helper.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NKees Cook <keescook@chromium.org>
Cc: linux-arch@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: gregkh@linuxfoundation.org
Cc: kernel-hardening@lists.openwall.com
Cc: torvalds@linux-foundation.org
Cc: alan@linux.intel.com
Link: https://lkml.kernel.org/r/151727413645.33451.15878817161436755393.stgit@dwillia2-desk3.amr.corp.intel.com

The TS_COMPAT bit is very hot and is accessed from code paths that mostly
also touch thread_info::flags.  Move it into struct thread_info to improve
cache locality.

The only reason it was in thread_struct is that there was a brief period
during which arch-specific fields were not allowed in struct thread_info.

Linus suggested further changing:

  ti->status &= ~(TS_COMPAT|TS_I386_REGS_POKED);

to:

  if (unlikely(ti->status & (TS_COMPAT|TS_I386_REGS_POKED)))
          ti->status &= ~(TS_COMPAT|TS_I386_REGS_POKED);

on the theory that frequently dirtying the cacheline even in pure 64-bit
code that never needs to modify status hurts performance.  That could be a
reasonable followup patch, but I suspect it matters less on top of this
patch.
Suggested-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NIngo Molnar <mingo@kernel.org>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Kernel Hardening <kernel-hardening@lists.openwall.com>
Link: https://lkml.kernel.org/r/03148bcc1b217100e6e8ecf6a5468c45cf4304b6.1517164461.git.luto@kernel.org

With the fast path removed there is no point in splitting the push of the
normal and the extra register set. Just push the extra regs right away.

[ tglx: Split out from 'x86/entry/64: Remove the SYSCALL64 fast path' ]
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NIngo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kernel Hardening <kernel-hardening@lists.openwall.com>
Link: https://lkml.kernel.org/r/462dff8d4d64dfbfc851fbf3130641809d980ecd.1517164461.git.luto@kernel.org

The SYCALLL64 fast path was a nice, if small, optimization back in the good
old days when syscalls were actually reasonably fast.  Now there is PTI to
slow everything down, and indirect branches are verboten, making everything
messier.  The retpoline code in the fast path is particularly nasty.

Just get rid of the fast path. The slow path is barely slower.

[ tglx: Split out the 'push all extra regs' part ]
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NIngo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kernel Hardening <kernel-hardening@lists.openwall.com>
Link: https://lkml.kernel.org/r/462dff8d4d64dfbfc851fbf3130641809d980ecd.1517164461.git.luto@kernel.org

The spectre_v2 option 'auto' does not check whether CONFIG_RETPOLINE is
enabled. As a consequence it fails to emit the appropriate warning and sets
feature flags which have no effect at all.

Add the missing IS_ENABLED() check.

Fixes: da285121 ("x86/spectre: Add boot time option to select Spectre v2 mitigation")
Signed-off-by: NDou Liyang <douly.fnst@cn.fujitsu.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: ak@linux.intel.com
Cc: peterz@infradead.org
Cc: Tomohiro" <misono.tomohiro@jp.fujitsu.com>
Cc: dave.hansen@intel.com
Cc: bp@alien8.de
Cc: arjan@linux.intel.com
Cc: dwmw@amazon.co.uk
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/f5892721-7528-3647-08fb-f8d10e65ad87@cn.fujitsu.com

Since commit 92a0f81d ("x86/cpu_entry_area: Move it out of the
fixmap"), i386's CPU_ENTRY_AREA has been mapped to the memory area just
below FIXADDR_START. But already immediately before FIXADDR_START is the
FIX_BTMAP area, which means that early_ioremap can collide with the entry
area.

It's especially bad on PAE where FIX_BTMAP_BEGIN gets aligned to exactly
match CPU_ENTRY_AREA_BASE, so the first early_ioremap slot clobbers the
IDT and causes interrupts during early boot to reset the system.

The overlap wasn't a problem before the CPU entry area was introduced,
as the fixmap has classically been preceded by the pkmap or vmalloc
areas, neither of which is used until early_ioremap is out of the
picture.

Relocate CPU_ENTRY_AREA to below FIX_BTMAP, not just below the permanent
fixmap area.

Fixes: commit 92a0f81d ("x86/cpu_entry_area: Move it out of the fixmap")
Signed-off-by: NWilliam Grant <william.grant@canonical.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/7041d181-a019-e8b9-4e4e-48215f841e2c@canonical.com

With the following fix:

  2a0098d7 ("objtool: Fix seg fault with gold linker")

... a seg fault was avoided, but the original seg fault condition in
objtool wasn't fixed.  Replace the seg fault with an error message.
Suggested-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/dc4585a70d6b975c99fc51d1957ccdde7bd52f3a.1517284349.git.jpoimboe@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Now that the previous patch gave objtool the ability to read retpoline
alternatives, it shows a new warning:

  arch/x86/entry/entry_64.o: warning: objtool: .entry_trampoline: don't know how to handle alternatives at end of section

This is due to the JMP_NOSPEC in entry_SYSCALL_64_trampoline().

Previously, objtool ignored this situation because it wasn't needed, and
it would have required a bit of extra code.  Now that this case exists,
add proper support for it.
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/2a30a3c2158af47d891a76e69bb1ef347e0443fd.1517284349.git.jpoimboe@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Currently objtool requires all retpolines to be:

  a) patched in with alternatives; and

  b) annotated with ANNOTATE_NOSPEC_ALTERNATIVE.

If you forget to do both of the above, objtool segfaults trying to
dereference a NULL 'insn->call_dest' pointer.

Avoid that situation and print a more helpful error message:

  quirks.o: warning: objtool: efi_delete_dummy_variable()+0x99: unsupported intra-function call
  quirks.o: warning: objtool: If this is a retpoline, please patch it in with alternatives and annotate it with ANNOTATE_NOSPEC_ALTERNATIVE.

Future improvements can be made to make objtool smarter with respect to
retpolines, but this is a good incremental improvement for now.
Reported-and-tested-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/819e50b6d9c2e1a22e34c1a636c0b2057cc8c6e5.1517284349.git.jpoimboe@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Time has come to switch PTI development over to a v4.15 base - we'll still
try to make sure that all PTI fixes backport cleanly to v4.14 and earlier.
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Pull x86 retpoline fixlet from Thomas Gleixner:
 "Remove the ESP/RSP thunks for retpoline as they cannot ever work.

  Get rid of them before they show up in a release"

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/retpoline: Remove the esp/rsp thunk

Pull x86 fixes from Thomas Gleixner:
 "A set of small fixes for 4.15:

   - Fix vmapped stack synchronization on systems with 4-level paging
     and a large amount of memory caused by a missing 5-level folding
     which made the pgd synchronization logic to fail and causing double
     faults.

   - Add a missing sanity check in the vmalloc_fault() logic on 5-level
     paging systems.

   - Bring back protection against accessing a freed initrd in the
     microcode loader which was lost by a wrong merge conflict
     resolution.

   - Extend the Broadwell micro code loading sanity check.

   - Add a missing ENDPROC annotation in ftrace assembly code which
     makes ORC unhappy.

   - Prevent loading the AMD power module on !AMD platforms. The load
     itself is uncritical, but an unload attempt results in a kernel
     crash.

   - Update Peter Anvins role in the MAINTAINERS file"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/ftrace: Add one more ENDPROC annotation
  x86: Mark hpa as a "Designated Reviewer" for the time being
  x86/mm/64: Tighten up vmalloc_fault() sanity checks on 5-level kernels
  x86/mm/64: Fix vmapped stack syncing on very-large-memory 4-level systems
  x86/microcode: Fix again accessing initrd after having been freed
  x86/microcode/intel: Extend BDW late-loading further with LLC size check
  perf/x86/amd/power: Do not load AMD power module on !AMD platforms

Pull timer fix from Thomas Gleixner:
 "A single fix for a ~10 years old problem which causes high resolution
  timers to stop after a CPU unplug/plug cycle due to a stale flag in
  the per CPU hrtimer base struct.

  Paul McKenney was hunting this for about a year, but the heisenbug
  nature made it resistant against debug attempts for quite some time"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  hrtimer: Reset hrtimer cpu base proper on CPU hotplug

Pull scheduler fix from Thomas Gleixner:
 "A single bug fix to prevent a subtle deadlock in the scheduler core
  code vs cpu hotplug"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/core: Fix cpu.max vs. cpuhotplug deadlock

Pull perf fixes from Thomas Gleixner:
 "Four patches which all address lock inversions and deadlocks in the
  perf core code and the Intel debug store"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86: Fix perf,x86,cpuhp deadlock
  perf/core: Fix ctx::mutex deadlock
  perf/core: Fix another perf,trace,cpuhp lock inversion
  perf/core: Fix lock inversion between perf,trace,cpuhp

Pull locking fixes from Thomas Gleixner:
 "Two final locking fixes for 4.15:

   - Repair the OWNER_DIED logic in the futex code which got wreckaged
     with the recent fix for a subtle race condition.

   - Prevent the hard lockup detector from triggering when dumping all
     held locks in the system"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/lockdep: Avoid triggering hardlockup from debug_show_all_locks()
  futex: Fix OWNER_DEAD fixup

When ORC support was added for the ftrace_64.S code, an ENDPROC
for function_hook() was missed. This results in the following warning:

  arch/x86/kernel/ftrace_64.o: warning: objtool: .entry.text+0x0: unreachable instruction

Fixes: e2ac83d7 ("x86/ftrace: Fix ORC unwinding from ftrace handlers")
Reported-by: NSteven Rostedt <rostedt@goodmis.org>
Reported-by: NBorislav Petkov <bp@alien8.de>
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NIngo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lkml.kernel.org/r/20180128022150.dqierscqmt3uwwsr@treble

Make it all a function which does the WRMSR instead of having a hairy
inline asm.

[dwmw2: export it, fix CONFIG_RETPOLINE issues]
Signed-off-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NDavid Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: ak@linux.intel.com
Cc: dave.hansen@intel.com
Cc: karahmed@amazon.de
Cc: arjan@linux.intel.com
Cc: torvalds@linux-foundation.org
Cc: peterz@infradead.org
Cc: bp@alien8.de
Cc: pbonzini@redhat.com
Cc: tim.c.chen@linux.intel.com
Cc: gregkh@linux-foundation.org
Link: https://lkml.kernel.org/r/1517070274-12128-4-git-send-email-dwmw@amazon.co.uk

Simplify it to call an asm-function instead of pasting 41 insn bytes at
every call site. Also, add alignment to the macro as suggested here:

  https://support.google.com/faqs/answer/7625886

[dwmw2: Clean up comments, let it clobber %ebx and just tell the compiler]
Signed-off-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NDavid Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: ak@linux.intel.com
Cc: dave.hansen@intel.com
Cc: karahmed@amazon.de
Cc: arjan@linux.intel.com
Cc: torvalds@linux-foundation.org
Cc: peterz@infradead.org
Cc: bp@alien8.de
Cc: pbonzini@redhat.com
Cc: tim.c.chen@linux.intel.com
Cc: gregkh@linux-foundation.org
Link: https://lkml.kernel.org/r/1517070274-12128-3-git-send-email-dwmw@amazon.co.uk

We want to expose the hardware features simply in /proc/cpuinfo as "ibrs",
"ibpb" and "stibp". Since AMD has separate CPUID bits for those, use them
as the user-visible bits.

When the Intel SPEC_CTRL bit is set which indicates both IBRS and IBPB
capability, set those (AMD) bits accordingly. Likewise if the Intel STIBP
bit is set, set the AMD STIBP that's used for the generic hardware
capability.

Hide the rest from /proc/cpuinfo by putting "" in the comments. Including
RETPOLINE and RETPOLINE_AMD which shouldn't be visible there. There are
patches to make the sysfs vulnerabilities information non-readable by
non-root, and the same should apply to all information about which
mitigations are actually in use. Those *shouldn't* appear in /proc/cpuinfo.

The feature bit for whether IBPB is actually used, which is needed for
ALTERNATIVEs, is renamed to X86_FEATURE_USE_IBPB.
Originally-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NDavid Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: ak@linux.intel.com
Cc: dave.hansen@intel.com
Cc: karahmed@amazon.de
Cc: arjan@linux.intel.com
Cc: torvalds@linux-foundation.org
Cc: peterz@infradead.org
Cc: bp@alien8.de
Cc: pbonzini@redhat.com
Cc: tim.c.chen@linux.intel.com
Cc: gregkh@linux-foundation.org
Link: https://lkml.kernel.org/r/1517070274-12128-2-git-send-email-dwmw@amazon.co.uk

If sysfs is disabled and RETPOLINE not defined:

arch/x86/kernel/cpu/bugs.c:97:13: warning: ‘spectre_v2_bad_module’ defined but not used
[-Wunused-variable]
 static bool spectre_v2_bad_module;

Hide it.

Fixes: caf7501a ("module/retpoline: Warn about missing retpoline in module")
Reported-by: NBorislav Petkov <bp@alien8.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>

The hrtimer interrupt code contains a hang detection and mitigation
mechanism, which prevents that a long delayed hrtimer interrupt causes a
continous retriggering of interrupts which prevent the system from making
progress. If a hang is detected then the timer hardware is programmed with
a certain delay into the future and a flag is set in the hrtimer cpu base
which prevents newly enqueued timers from reprogramming the timer hardware
prior to the chosen delay. The subsequent hrtimer interrupt after the delay
clears the flag and resumes normal operation.

If such a hang happens in the last hrtimer interrupt before a CPU is
unplugged then the hang_detected flag is set and stays that way when the
CPU is plugged in again. At that point the timer hardware is not armed and
it cannot be armed because the hang_detected flag is still active, so
nothing clears that flag. As a consequence the CPU does not receive hrtimer
interrupts and no timers expire on that CPU which results in RCU stalls and
other malfunctions.

Clear the flag along with some other less critical members of the hrtimer
cpu base to ensure starting from a clean state when a CPU is plugged in.

Thanks to Paul, Sebastian and Anna-Maria for their help to get down to the
root cause of that hard to reproduce heisenbug. Once understood it's
trivial and certainly justifies a brown paperbag.

Fixes: 41d2e494 ("hrtimer: Tune hrtimer_interrupt hang logic")
Reported-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Sewior <bigeasy@linutronix.de>
Cc: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1801261447590.2067@nanos

Due to some unfortunate events, I have not been directly involved in
the x86 kernel patch flow for a while now.  I have also not been able
to ramp back up by now like I had hoped to, and after reviewing what I
will need to work on both internally at Intel and elsewhere in the near
term, it is clear that I am not going to be able to ramp back up until
late 2018 at the very earliest.

It is not acceptable to not recognize that this load is currently
taken by Ingo and Thomas without my direct participation, so I mark
myself as R: (designated reviewer) rather than M: (maintainer) until
further notice.  This is in fact recognizing the de facto situation
for the past few years.

I have obviously no intention of going away, and I will do everything
within my power to improve Linux on x86 and x86 for Linux.  This,
however, puts credit where it is due and reflects a change of focus.

This patch also removes stale entries for portions of the x86
architecture which have not been maintained separately from arch/x86
for a long time.  If there is a reason to re-introduce them then that
can happen later.
Signed-off-by: NH. Peter Anvin <h.peter.anvin@intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Bruce Schlobohm <bruce.schlobohm@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180125195934.5253-1-hpa@zytor.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Merge tag 'riscv-for-linus-4.15-maintainers' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux

Pull RISC-V update from Palmer Dabbelt:
 "RISC-V: We have a new mailing list and git repo!

  Sorry to send something essentially as late as possible (Friday after
  an rc9), but we managed to get a mailing list for the RISC-V Linux
  port. We've been using patches@groups.riscv.org for a while, but that
  list has some problems (it's Google Groups and it's shared over all
  RISC-V software projects). The new infaread.org list is much better.
  We just got it on Wednesday but I used it a bit on Thursday to shake
  out all the configuration problems and it appears to be in working
  order.

  When I updated the mailing list I noticed that the MAINTAINERS file
  was pointing to our github repo, but now that we have a kernel.org
  repo I'd like to point to that instead so I changed that as well.
  We'll be centralizing all RISC-V Linux related development here as
  that seems to be the saner way to go about it.

  I can understand if it's too late to get this into 4.15, but given
  that it's not a code change I was hoping it'd still be OK. It would be
  nice to have the new mailing list and git repo in the release tarballs
  so when people start to find bugs they'll get to the right place"

* tag 'riscv-for-linus-4.15-maintainers' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
  Update the RISC-V MAINTAINERS file