- 29 5月, 2014 12 次提交
-
-
由 Anna Schumaker 提交于
At this point the read and write structures look identical, so combine them into something shared by both. Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Anna Schumaker 提交于
What we have here is two functions that look identical. Let's share some more code! Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Anna Schumaker 提交于
Once again, these two functions look identical in the read and write case. Time to combine them together! Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Anna Schumaker 提交于
Most of this code is the same for both the read and write paths, so combine everything and use the rw_ops when necessary. Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Anna Schumaker 提交于
These functions are almost identical on both the read and write side. FLUSH_COND_STABLE will never be set for the read path, so leaving it in the generic code won't hurt anything. Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Anna Schumaker 提交于
At this point, the read and write versions of this function look identical so both should use the same function. Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Anna Schumaker 提交于
Write adds a little bit of code dealing with flush flags, but since "how" will always be 0 when reading we can share the code. Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Anna Schumaker 提交于
The read and write paths set up this struct in exactly the same way, so create a single shared struct. Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Anna Schumaker 提交于
Combining these functions will let me make a single nfs_rw_common_ops struct (see the next patch). Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Anna Schumaker 提交于
The read and write paths do exactly the same thing for the rpc_prepare rpc_op. This patch combines them together into a single function. Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Anna Schumaker 提交于
I create a new struct nfs_rw_ops to decide the differences between reads and writes. This struct will be set when initializing a new nfs_pgio_descriptor, and then passed on to the nfs_rw_header when a new header is allocated. Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Anna Schumaker 提交于
These functions are identical for the read and write paths so they can be combined. Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
- 06 9月, 2013 1 次提交
-
-
由 Trond Myklebust 提交于
When coalescing requests into a single READ or WRITE RPC call, and there is no file locking involved, we don't have to refuse coalescing for requests where the lock owner information doesn't match. Reported-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 09 4月, 2013 1 次提交
-
-
由 Trond Myklebust 提交于
This will later allow NFS locking code to wait for readahead to complete before releasing byte range locks. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 26 3月, 2013 1 次提交
-
-
由 Trond Myklebust 提交于
If the state recovery failed, we want to ensure that the application doesn't try to use the same file descriptor for more reads or writes. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 29 9月, 2012 2 次提交
-
-
由 Trond Myklebust 提交于
We want to be able to pass on the information that the page was not dirtied under a lock. Instead of adding a flag parameter, do this by passing a pointer to a 'struct nfs_lock_owner' that may be NULL. Also reuse this structure in struct nfs_lock_context to carry the fl_owner_t and pid_t. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
We want to be able to distinguish between allocation failures, and the case where the lock context is not needed (because there are no locks). Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 03 8月, 2012 1 次提交
-
-
由 Peng Tao 提交于
To allow layout driver to pass private information around pg_init/pg_doio. Signed-off-by: NPeng Tao <tao.peng@emc.com> Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 01 8月, 2012 2 次提交
-
-
由 Mel Gorman 提交于
GFP_NOFS is _more_ permissive than GFP_NOIO in that it will initiate IO, just not of any filesystem data. The problem is that previously NOFS was correct because that avoids recursion into the NFS code. With swap-over-NFS, it is no longer correct as swap IO can lead to this recursion. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NMel Gorman <mgorman@suse.de> Acked-by: NRik van Riel <riel@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: David S. Miller <davem@davemloft.net> Cc: Eric B Munson <emunson@mgebm.net> Cc: Eric Paris <eparis@redhat.com> Cc: James Morris <jmorris@namei.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: Neil Brown <neilb@suse.de> Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Xiaotian Feng <dfeng@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mel Gorman 提交于
Replace all relevant occurences of page->index and page->mapping in the NFS client with the new page_file_index() and page_file_mapping() functions. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NMel Gorman <mgorman@suse.de> Acked-by: NRik van Riel <riel@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: David S. Miller <davem@davemloft.net> Cc: Eric B Munson <emunson@mgebm.net> Cc: Eric Paris <eparis@redhat.com> Cc: James Morris <jmorris@namei.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: Neil Brown <neilb@suse.de> Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Xiaotian Feng <dfeng@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 31 7月, 2012 1 次提交
-
-
由 Bryan Schumaker 提交于
This patch exports symbols needed by the v4 module. In addition, I also switch over to using IS_ENABLED() to check if CONFIG_NFS_V4 or CONFIG_NFS_V4_MODULE are set. The module (nfs4.ko) will be created in the same directory as nfs.ko and will be automatically loaded the first time you try to mount over NFS v4. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 10 5月, 2012 2 次提交
-
-
由 Trond Myklebust 提交于
Function rename to ensure that the functionality of nfs_unlock_request() mirrors that of nfs_lock_request(). Then let nfs_unlock_and_release_request() do the work of what used to be called nfs_unlock_request()... Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: Fred Isaman <iisaman@netapp.com>
-
由 Trond Myklebust 提交于
We have to unlock the nfs_page before we call nfs_end_page_writeback to avoid races with functions that expect the page to be unlocked when PG_locked and PG_writeback are not set. The problem is that nfs_unlock_request also releases the nfs_page, causing a deadlock if the release of the nfs_open_context triggers an iput() while the PG_writeback flag is still set... The solution is to separate the unlocking and release of the nfs_page, so that we can do the former before nfs_end_page_writeback and the latter after. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: Fred Isaman <iisaman@netapp.com>
-
- 28 4月, 2012 6 次提交
-
-
由 Fred Isaman 提交于
This also has the advantage that it allows directio to use pnfs. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
The coalesce code made assumptions that will no longer be true once non-page aligned io occurs. This introduces no change in current behavior, but allows for more general situations to come. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Factors out the code that will need to change when directio starts using these code paths. This will allow directio to use the generic pagein and flush routines Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Decouple nfs_pgio_header and nfs_read_data, and have (possibly multiple) nfs_read_datas each take a refcount on nfs_pgio_header. For the moment keeps nfs_read_header as a way to preallocate a single nfs_read_data with the nfs_pgio_header. The code doesn't need this, and would be prettier without, but given the amount of churn I am already introducing I didn't want to play with tuning new mempools. This also fixes bug in pnfs_ld_handle_read_error. In the case of desc->pg_bsize < PAGE_CACHE_SIZE, the pages list was empty, causing replay attempt to do nothing. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Both nfs_read_data and nfs_write_data devote several fields which can be combined into a single shared struct. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 11 3月, 2012 2 次提交
-
-
由 Fred Isaman 提交于
The radix tree is only being used to compile lists of reqs needing commit. It is simpler to just put the reqs directly into a list. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
The last real use of this tag was removed by commit 7f2f12d9 NFS: Simplify nfs_wb_page() Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 01 2月, 2012 1 次提交
-
-
由 Trond Myklebust 提交于
Also from linux/nfs_xdr.h. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 01 11月, 2011 1 次提交
-
-
由 Paul Gortmaker 提交于
These files were getting <linux/module.h> via an implicit include path, but we want to crush those out of existence since they cost time during compiles of processing thousands of lines of headers for no reason. Give them the lightweight header that just contains the EXPORT_SYMBOL infrastructure. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
- 31 10月, 2011 1 次提交
-
-
由 Chuck Lever 提交于
Clean up: the first parameter of nfs_create_request() has been incorrectly documented since time immemorial (OK, since before 2.6.12). Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 20 7月, 2011 1 次提交
-
-
由 Al Viro 提交于
just dentry, please... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 15 7月, 2011 1 次提交
-
-
由 Trond Myklebust 提交于
If an attempt to do pNFS fails, and we have to fall back to writing through the MDS, then we may want to re-coalesce the requests that we already have since the block size for the MDS read/writes may be different to that of the DS read/writes. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 13 7月, 2011 2 次提交
-
-
由 Trond Myklebust 提交于
Ensure that we always get a layout before setting up the i/o request. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
We need to ensure that the layouts are set up before we can decide to coalesce requests. To do so, we want to further split up the struct nfs_pageio_descriptor operations into an initialisation callback, a coalescing test callback, and a 'do i/o' callback. This patch cleans up the existing callback methods before adding the 'initialisation' callback. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 21 6月, 2011 1 次提交
-
-
由 Benny Halevy 提交于
Otherwise we end up overflowing the rpc buffer size on the receive end. Signed-off-by: NBenny Halevy <benny@tonian.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 30 5月, 2011 1 次提交
-
-
由 Boaz Harrosh 提交于
By default, unless pnfs is used coalesce pages until pg_bsize (rsize or wsize) is reached. pnfs layout drivers define their own pg_test methods that use pnfs_generic_pg_test and need to define their own I/O size limits (e.g. based on the file stripe size). [Move a check from nfs_pageio_do_add_request to nfs_generic_pg_test] Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
-