Pull sound fixes from Takashi Iwai:
 "A few fixes covering the issues reported by syzkaller, a couple of
  fixes for the MIDI decoding bug, and a few usual HD-audio quirks.

  Some of them are about ALSA core stuff, but they are small fixes just
  for corner cases, and nothing thrilling"

* tag 'sound-5.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/realtek - Enable the headset of Acer N50-600 with ALC662
  ALSA: hda/realtek - Enable headset mic of Acer X2660G with ALC662
  ALSA: seq: oss: Fix running status after receiving sysex
  ALSA: seq: virmidi: Fix running status after receiving sysex
  ALSA: pcm: oss: Remove WARNING from snd_pcm_plug_alloc() checks
  ALSA: hda/realtek: Fix pop noise on ALC225
  ALSA: line6: Fix endless MIDI read loop
  ALSA: pcm: oss: Avoid plugin buffer overflow

Pull drm fixes from Dave Airlie:
 "Hope you are well hiding out above the garage. A few amdgpu changes
  but nothing too major. I've had a wisdom tooth out this week so
  haven't been to on top of things, but all seems good.

  core:
   - fix lease warning

  i915:
   - Track active elements during dequeue
   - Fix failure to handle all MCR ranges
   - Revert unnecessary workaround

  amdgpu:
   - Pageflip fix
   - VCN clockgating fixes
   - GPR debugfs fix for umr
   - GPU reset fix
   - eDP fix for MBP
   - DCN2.x fix

  dw-hdmi:
   - fix AVI frame colorimetry

  komeda:
   - fix compiler warning

  bochs:
   - downgrade a binding failure to a warning"

* tag 'drm-fixes-2020-03-20' of git://anongit.freedesktop.org/drm/drm:
  drm/amd/display: Fix pageflip event race condition for DCN.
  drm/amdgpu: fix typo for vcn2.5/jpeg2.5 idle check
  drm/amdgpu: fix typo for vcn2/jpeg2 idle check
  drm/amdgpu: fix typo for vcn1 idle check
  drm/lease: fix WARNING in idr_destroy
  drm/i915: Handle all MCR ranges
  Revert "drm/i915/tgl: Add extra hdc flush workaround"
  drm/i915/execlists: Track active elements during dequeue
  drm/bochs: downgrade pci_request_region failure from error to warning
  drm/amd/display: Add link_rate quirk for Apple 15" MBP 2017
  drm/amdgpu: add fbdev suspend/resume on gpu reset
  drm/amd/amdgpu: Fix GPR read from debugfs (v2)
  drm/amd/display: fix typos for dcn20_funcs and dcn21_funcs struct
  drm/komeda: mark PM functions as __maybe_unused
  drm/bridge: dw-hdmi: fix AVI frame colorimetry

Merge tag 'drm-intel-fixes-2020-03-19' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

drm/i915 fixes for v5.6-rc7:
- Track active elements during dequeue
- Fix failure to handle all MCR ranges
- Revert unnecessary workaround
Signed-off-by: NDave Airlie <airlied@redhat.com>

From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/877dzgepvu.fsf@intel.com

Merge tag 'amd-drm-fixes-5.6-2020-03-19' of git://people.freedesktop.org/~agd5f/linux into drm-fixes

amd-drm-fixes-5.6-2020-03-19:

amdgpu:
- Pageflip fix
- VCN clockgating fixes
- GPR debugfs fix for umr
- GPU reset fix
- eDP fix for MBP
- DCN2.x fix
Signed-off-by: NDave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200319204054.1036478-1-alexander.deucher@amd.com

Commit '16f17eda ("drm/amd/display: Send vblank and user
events at vsartup for DCN")' introduces a new way of pageflip
completion handling for DCN, and some trouble.

The current implementation introduces a race condition, which
can cause pageflip completion events to be sent out one vblank
too early, thereby confusing userspace and causing flicker:

prepare_flip_isr():

1. Pageflip programming takes the ddev->event_lock.
2. Sets acrtc->pflip_status == AMDGPU_FLIP_SUBMITTED
3. Releases ddev->event_lock.

--> Deadline for surface address regs double-buffering passes on
    target pipe.

4. dc_commit_updates_for_stream() MMIO programs the new pageflip
   into hw, but too late for current vblank.

=> pflip_status == AMDGPU_FLIP_SUBMITTED, but flip won't complete
   in current vblank due to missing the double-buffering deadline
   by a tiny bit.

5. VSTARTUP trigger point in vblank is reached, VSTARTUP irq fires,
   dm_dcn_crtc_high_irq() gets called.

6. Detects pflip_status == AMDGPU_FLIP_SUBMITTED and assumes the
   pageflip has been completed/will complete in this vblank and
   sends out pageflip completion event to userspace and resets
   pflip_status = AMDGPU_FLIP_NONE.

=> Flip completion event sent out one vblank too early.

This behaviour has been observed during my testing with measurement
hardware a couple of time.

The commit message says that the extra flip event code was added to
dm_dcn_crtc_high_irq() to prevent missing to send out pageflip events
in case the pflip irq doesn't fire, because the "DCH HUBP" component
is clock gated and doesn't fire pflip irqs in that state. Also that
this clock gating may happen if no planes are active. This suggests
that the problem addressed by that commit can't happen if planes
are active.

The proposed solution is therefore to only execute the extra pflip
completion code iff the count of active planes is zero and otherwise
leave pflip completion handling to the pflip irq handler, for a
more race-free experience.

Note that i don't know if this fixes the problem the original commit
tried to address, as i don't know what the test scenario was. It
does fix the observed too early pageflip events though and points
out the problem introduced.

Fixes: 16f17eda ("drm/amd/display: Send vblank and user events at vsartup for DCN")
Reviewed-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: NMario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Pull MMC fixes from Ulf Hansson:

 - rtsx_pci: Fix support for some various speed modes

 - sdhci-of-at91: Fix support for GPIO card detect on SAMA5D2

 - sdhci-cadence: Fix support for DDR52 speed mode for eMMC on UniPhier

 - sdhci-acpi: Fix broken WP support on Acer Aspire Switch 10

 - sdhci-acpi: Workaround FW bug for suspend on Lenovo Miix 320

* tag 'mmc-v5.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: rtsx_pci: Fix support for speed-modes that relies on tuning
  mmc: sdhci-of-at91: fix cd-gpios for SAMA5D2
  mmc: sdhci-cadence: set SDHCI_QUIRK2_PRESET_VALUE_BROKEN for UniPhier
  mmc: sdhci-acpi: Disable write protect detection on Acer Aspire Switch 10 (SW5-012)
  mmc: sdhci-acpi: Switch signal voltage back to 3.3V on suspend on external microSD on Lenovo Miix 320

Pull cifs fixes from Steve French:
 "Three small smb3 fixes, two for stable"

* tag '5.6-rc6-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  CIFS: fiemap: do not return EINVAL if get nothing
  CIFS: Increment num_remote_opens stats counter even in case of smb2_query_dir_first
  cifs: potential unintitliazed error code in cifs_getattr()

Merge tag 'kbuild-fixes-v5.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - fix __uint128_t capability test in Kconfig when GCC that defaults to
   32-bit is used to build the 64-bit kernel

 - suppress new noisy Clang warnings -Wpointer-to-enum-cast

 - move the namespace field in Module.symvers for the backward
   compatibility reason for the depmod tool

 - use available compression for initramdisk when INTRAMFS_SOURCE is
   defined, which was the original behavior

 - fix modpost to handle correct large section numbers when it refers to
   modversion CRCs and module namespaces

 - fix comments and documents

* tag 'kbuild-fixes-v5.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  scripts/kallsyms: fix wrong kallsyms_relative_base
  modpost: Get proper section index by get_secindex() instead of st_shndx
  initramfs: restore default compression behavior
  modpost: move the namespace field in Module.symvers last
  kbuild: Disable -Wpointer-to-enum-cast
  kbuild: doc: fix references to other documents
  int128: fix __uint128_t compiler test in Kconfig
  kconfig: introduce m32-flag and m64-flag
  kbuild: Fix inconsistent comment

I have hit the following build error:

  armv7a-hardfloat-linux-gnueabi-ld: drivers/rtc/rtc-max8907.o: in function `max8907_rtc_probe':
  rtc-max8907.c:(.text+0x400): undefined reference to `regmap_irq_get_virq'

max8907 should select REGMAP_IRQ

Fixes: 94c01ab6 ("rtc: add MAX8907 RTC driver")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NCorentin Labbe <clabbe@baylibre.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There is the code in the read_symbol function in 'scripts/kallsyms.c':

	if (is_ignored_symbol(name, type))
		return NULL;

	/* Ignore most absolute/undefined (?) symbols. */
	if (strcmp(name, "_text") == 0)
		_text = addr;

But the is_ignored_symbol function returns true for name="_text" and
type='A'. So the next condition is not executed and the _text variable
is always zero.

It makes the wrong kallsyms_relative_base symbol as a result of the code
(CONFIG_KALLSYMS_BASE_RELATIVE is defined):

	if (base_relative) {
		output_label("kallsyms_relative_base");
		output_address(relative_base);
		printf("\n");
	}

Because the output_address function uses the _text variable.

So the kallsyms_lookup function and all related functions in the kernel
do not work properly. For example, the stack trace in oops:

 Call Trace:
 [aa095e58] [809feab8] kobj_ns_ops_tbl+0x7ff09ac8/0x7ff1c1c4 (unreliable)
 [aa095e98] [80002b64] kobj_ns_ops_tbl+0x7f50db74/0x80000010
 [aa095ef8] [809c3d24] kobj_ns_ops_tbl+0x7feced34/0x7ff1c1c4
 [aa095f28] [80002ed0] kobj_ns_ops_tbl+0x7f50dee0/0x80000010
 [aa095f38] [8000f238] kobj_ns_ops_tbl+0x7f51a248/0x80000010

The right stack trace:

 Call Trace:
 [aa095e58] [809feab8] module_vdu_video_init+0x2fc/0x3bc (unreliable)
 [aa095e98] [80002b64] do_one_initcall+0x40/0x1f0
 [aa095ef8] [809c3d24] kernel_init_freeable+0x164/0x1d8
 [aa095f28] [80002ed0] kernel_init+0x14/0x124
 [aa095f38] [8000f238] ret_from_kernel_thread+0x14/0x1c

[masahiroy@kernel.org:

This issue happens on binutils <= 2.22
The following commit fixed it:
https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=d2667025dd30611514810c28bee9709e4623012a

The symbol type of _text is 'T' on binutils >= 2.23
The minimal supported binutils version for the kernel build is 2.21
]
Signed-off-by: NMikhail Petrov <Mikhail.Petrov@mir.dev>
Signed-off-by: NMasahiro Yamada <masahiroy@kernel.org>

Merge tag 'drm-misc-fixes-2020-03-18-1' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

- drm/lease: fix WARNING in idr_destroy
- Fix AVI frame colorimetry in the dw-hdmi bridge.
- Fix compiler warning in komeda by annotating functions as __maybe_unused.
- Downgrade bochs pci_request_region failure from error to warning to
  workaround firmware fb.
Signed-off-by: NDave Airlie <airlied@redhat.com>

From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7654ac39-deb8-c9ca-9fd5-ef77b2636380@linux.intel.com

fix typo for vcn2.5/jpeg2.5 idle check
Signed-off-by: NJames Zhu <James.Zhu@amd.com>
Reviewed-by: NLeo Liu <leo.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

fix typo for vcn2/jpeg2 idle check
Signed-off-by: NJames Zhu <James.Zhu@amd.com>
Reviewed-by: NLeo Liu <leo.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

fix typo for vcn1 idle check
Signed-off-by: NJames Zhu <James.Zhu@amd.com>
Reviewed-by: NLeo Liu <leo.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

There is measurable performance impact in some synthetic tests due to
commit 6d390e4b (locks: fix a potential use-after-free problem when
wakeup a waiter). Fix the race condition instead by clearing the
fl_blocker pointer after the wake_up, using explicit acquire/release
semantics.

This does mean that we can no longer use the clearing of fl_blocker as
the wait condition, so switch the waiters over to checking whether the
fl_blocked_member list_head is empty.
Reviewed-by: Nyangerkun <yangerkun@huawei.com>
Reviewed-by: NNeilBrown <neilb@suse.de>
Fixes: 6d390e4b (locks: fix a potential use-after-free problem when wakeup a waiter)
Signed-off-by: NJeff Layton <jlayton@kernel.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

(uint16_t) st_shndx is limited to 65535(i.e. SHN_XINDEX) so sym_get_data() gets
wrong section index by st_shndx if requested symbol contains extended section
index that is more than 65535.  In this case, we need to get proper section index
by .symtab_shndx section.

Module.symvers generated by building kernel with "-ffunction-sections -fdata-sections"
shows the issue.

Fixes: 56067812 ("kbuild: modversions: add infrastructure for emitting relative CRCs")
Fixes: e84f9fbb ("modpost: refactor namespace_from_kstrtabns() to not hard-code section name")
Signed-off-by: NXiao Yang <yangx.jy@cn.fujitsu.com>
Signed-off-by: NMasahiro Yamada <masahiroy@kernel.org>

This is just a cleanup addition to Jann's fix to properly update the
transaction ID for the slub slowpath in commit fd4d9c7d ("mm: slub:
add missing TID bump..").

The transaction ID is what protects us against any concurrent accesses,
but we should really also make sure to make the 'freelist' comparison
itself always use the same freelist value that we then used as the new
next free pointer.

Jann points out that if we do all of this carefully, we could skip the
transaction ID update for all the paths that only remove entries from
the lists, and only update the TID when adding entries (to avoid the ABA
issue with cmpxchg and list handling re-adding a previously seen value).

But this patch just does the "make sure to cmpxchg the same value we
used" rather than then try to be clever.
Acked-by: NJann Horn <jannh@google.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When kmem_cache_alloc_bulk() attempts to allocate N objects from a percpu
freelist of length M, and N > M > 0, it will first remove the M elements
from the percpu freelist, then call ___slab_alloc() to allocate the next
element and repopulate the percpu freelist. ___slab_alloc() can re-enable
IRQs via allocate_slab(), so the TID must be bumped before ___slab_alloc()
to properly commit the freelist head change.

Fix it by unconditionally bumping c->tid when entering the slowpath.

Cc: stable@vger.kernel.org
Fixes: ebe909e0 ("slub: improve bulk alloc strategy")
Signed-off-by: NJann Horn <jannh@google.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

drm_lease_create takes ownership of leases. And leases will be released
by drm_master_put.

drm_master_put
    ->drm_master_destroy
            ->idr_destroy

So we needn't call idr_destroy again.

Reported-and-tested-by: syzbot+05835159fe322770fe3d@syzkaller.appspotmail.com
Signed-off-by: NQiujun Huang <hqjagain@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1584518030-4173-1-git-send-email-hqjagain@gmail.com

The TX/RX register should not be treated the same way to allow for better
support of tuning. Fix this by using a default initial value for TX.
Signed-off-by: NRicky Wu <ricky_wu@realtek.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200316025232.1167-1-ricky_wu@realtek.com
[Ulf: Updated changelog]
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

If we call fiemap on a truncated file with none blocks allocated,
it makes sense we get nothing from this call. No output means
no blocks have been counted, but the call succeeded. It's a valid
response.

Simple example reproducer:
xfs_io -f 'truncate 2M' -c 'fiemap -v' /cifssch/testfile
xfs_io: ioctl(FS_IOC_FIEMAP) ["/cifssch/testfile"]: Invalid argument
Signed-off-by: NMurphy Zhou <jencce.kernel@gmail.com>
Signed-off-by: NSteve French <stfrench@microsoft.com>
Reviewed-by: NPavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org>

The num_remote_opens counter keeps track of the number of open files which must be
maintained by the server at any point. This is a per-tree-connect counter, and the value
of this counter gets displayed in the /proc/fs/cifs/Stats output as a following...

Open files: 0 total (local), 1 open on server
                             ^^^^^^^^^^^^^^^^
As a thumb-rule, we want to increment this counter for each open/create that we
successfully execute on the server. Similarly, we should decrement the counter when
we successfully execute a close.

In this case, an increment was being missed in case of smb2_query_dir_first,
in case of successful open. As a result, we would underflow the counter and we
could even see the counter go to negative after sufficient smb2_query_dir_first calls.

I tested the stats counter for a bunch of filesystem operations with the fix.
And it looks like the counter looks correct to me.

I also check if we missed the increments and decrements elsewhere. It does not
seem so. Few other cases where an open is done and we don't increment the counter are
the compound calls where the corresponding close is also sent in the request.
Signed-off-by: NShyam Prasad N <nspmangalore@gmail.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: NSteve French <stfrench@microsoft.com>
Reviewed-by: NAurelien Aptel <aaptel@suse.com>
Reviewed-by: NPavel Shilovsky <pshilov@microsoft.com>

Smatch complains that "rc" could be uninitialized.

    fs/cifs/inode.c:2206 cifs_getattr() error: uninitialized symbol 'rc'.

Changing it to "return 0;" improves readability as well.

Fixes: cc1baf98c8f6 ("cifs: do not ignore the SYNC flags in getattr")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NSteve French <stfrench@microsoft.com>
Acked-by: NRonnie Sahlberg <lsahlber@redhat.com>

A headset on the desktop like Acer N50-600 does not work, until quirk
ALC662_FIXUP_ACER_NITRO_HEADSET_MODE is applied.
Signed-off-by: NJian-Hong Pan <jian-hong@endlessm.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200317082806.73194-3-jian-hong@endlessm.comSigned-off-by: NTakashi Iwai <tiwai@suse.de>

The Acer desktop X2660G with ALC662 can't detect the headset microphone
until ALC662_FIXUP_ACER_X2660G_HEADSET_MODE quirk applied.
Signed-off-by: NJian-Hong Pan <jian-hong@endlessm.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200317082806.73194-2-jian-hong@endlessm.comSigned-off-by: NTakashi Iwai <tiwai@suse.de>

Pull HID fixes from Jiri Kosina:

 - string buffer formatting fixes in picolcd and sensor drivers, from
   Takashi Iwai

 - two new device IDs from Chen-Tsung Hsieh and Tony Fischetti

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: add ALWAYS_POLL quirk to lenovo pixart mouse
  HID: google: add moonball USB id
  HID: hid-sensor-custom: Use scnprintf() for avoiding potential buffer overflow
  HID: hid-picolcd_fb: Use scnprintf() for avoiding potential buffer overflow

SAMA5D2x doesn't drive CMD line if GPIO is used as CD line (at least
SAMA5D27 doesn't). Fix this by forcing card-detect in the module
if module-controlled CD is not used.

Fixed commit addresses the problem only for non-removable cards. This
amends it to also cover gpio-cd case.

Cc: stable@vger.kernel.org
Fixes: 7a1e3f14 ("mmc: sdhci-of-at91: force card detect value for non removable devices")
Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-by: NAdrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/8d10950d9940468577daef4772b82a071b204716.1584290561.git.mirq-linux@rere.qmqm.plSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org>

The SDHCI_PRESET_FOR_* registers are not set for the UniPhier platform
integration. (They are all read as zeros).

Set the SDHCI_QUIRK2_PRESET_VALUE_BROKEN quirk flag. Otherwise, the
High Speed DDR mode on the eMMC controller (MMC_TIMING_MMC_DDR52)
would not work.

I split the platform data to give no impact to other platforms,
although the UniPhier platform is currently only the upstream user
of this IP.

The SDHCI_QUIRK2_PRESET_VALUE_BROKEN flag is set if the compatible
string matches to "socionext,uniphier-sd4hc".
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200312104257.21017-1-yamada.masahiro@socionext.comSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org>

On the Acer Aspire Switch 10 (SW5-012) microSD slot always reports the card
being write-protected even though microSD cards do not have a write-protect
switch at all.

Add a new DMI_QUIRK_SD_NO_WRITE_PROTECT quirk which when set sets
the MMC_CAP2_NO_WRITE_PROTECT flag on the controller for the external SD
slot; and add a DMI quirk table entry which selects this quirk for the
Acer SW5-012.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200316184753.393458-2-hdegoede@redhat.comSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org>

mmc: sdhci-acpi: Switch signal voltage back to 3.3V on suspend on external microSD on Lenovo Miix 320

Based on a sample of 7 DSDTs from Cherry Trail devices using an AXP288
PMIC depending on the design one of 2 possible LDOs on the PMIC is used
for the MMC signalling voltage, either DLDO3 or GPIO1LDO (GPIO1 pin in
low noise LDO mode).

The Lenovo Miix 320-10ICR uses GPIO1LDO in the SHC1 ACPI device's DSM
methods to set 3.3 or 1.8 signalling voltage and this appears to work
as advertised, so presumably the device is actually using GPIO1LDO for
the external microSD signalling voltage.

But this device has a bug in the _PS0 method of the SHC1 ACPI device,
the DSM remembers the last set signalling voltage and the _PS0 restores
this after a (runtime) suspend-resume cycle, but it "restores" the voltage
on DLDO3 instead of setting it on GPIO1LDO as the DSM method does. DLDO3
is used for the LCD and setting it to 1.8V causes the LCD to go black.

This commit works around this issue by calling the Intel DSM to reset the
signal voltage to 3.3V after the host has been runtime suspended.
This will make the _PS0 method reprogram the DLDO3 voltage to 3.3V, which
leaves it at its original setting fixing the LCD going black.

This commit adds and uses a DMI quirk mechanism to only trigger this
workaround on the Lenovo Miix 320 while leaving the behavior of the
driver unchanged on other devices.

BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=111294
BugLink: https://gitlab.freedesktop.org/drm/intel/issues/355Reported-by: Nrussianneuromancer <russianneuromancer@ya.ru>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200316184753.393458-1-hdegoede@redhat.comSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Even though INITRAMFS_SOURCE kconfig option isn't set in most of
defconfigs it is used (set) extensively by various build systems.
Commit f26661e1 ("initramfs: make initramfs compression choice
non-optional") has changed default compression mode. Previously we
compress initramfs using available compression algorithm. Now
we don't use any compression at all by default.
It significantly increases the image size in case of build system
chooses embedded initramfs. Initially I faced with this issue while
using buildroot.

As of today it's not possible to set preferred compression mode
in target defconfig as this option depends on INITRAMFS_SOURCE
being set. Modification of all build systems either doesn't look
like good option.

Let's instead rewrite initramfs compression mode choices list
the way that "INITRAMFS_COMPRESSION_NONE" will be the last option
in the list. In that case it will be chosen only if all other
options (which implements any compression) are not available.
Signed-off-by: NEugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: NMasahiro Yamada <masahiroy@kernel.org>

In order to preserve backwards compatability with kmod tools, we have to
move the namespace field in Module.symvers last, as the depmod -e -E
option looks at the first three fields in Module.symvers to check symbol
versions (and it's expected they stay in the original order of crc,
symbol, module).

In addition, update an ancient comment above read_dump() in modpost that
suggested that the export type field in Module.symvers was optional. I
suspect that there were historical reasons behind that comment that are
no longer accurate. We have been unconditionally printing the export
type since 2.6.18 (commit bd5cbced), which is over a decade ago now.

Fix up read_dump() to treat each field as non-optional. I suspect the
original read_dump() code treated the export field as optional in order
to support pre <= 2.6.18 Module.symvers (which did not have the export
type field). Note that although symbol namespaces are optional, the
field will not be omitted from Module.symvers if a symbol does not have
a namespace. In this case, the field will simply be empty and the next
delimiter or end of line will follow.

Cc: stable@vger.kernel.org
Fixes: cb9b55d2 ("modpost: add support for symbol namespaces")
Tested-by: NMatthias Maennich <maennich@google.com>
Reviewed-by: NMatthias Maennich <maennich@google.com>
Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: NJessica Yu <jeyu@kernel.org>
Signed-off-by: NMasahiro Yamada <masahiroy@kernel.org>

Pull ARM fixes from Russell King:

 - allow use of ARMv8 arch timer in 32-bit VDSO

 - rename missed .fixup section

 - fix kbuild issue with stack protector GCC plugin

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8961/2: Fix Kbuild issue caused by per-task stack protector GCC plugin
  ARM: 8958/1: rename missed uaccess .fixup section
  ARM: 8957/1: VDSO: Match ARMv8 timer in cntvct_functional()

A lenovo pixart mouse (17ef:608d) is afflicted common the the malfunction
where it disconnects and reconnects every minute--each time incrementing
the device number. This patch adds the device id of the device and
specifies that it needs the HID_QUIRK_ALWAYS_POLL quirk in order to
work properly.
Signed-off-by: NTony Fischetti <tony.fischetti@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Add 1 additional hammer-like device.
Signed-off-by: NChen-Tsung Hsieh <chentsung@chromium.org>
Reviewed-by: NNicolas Boichat <drinkcat@chromium.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The bspec documents multiple MCR ranges; make sure they're all captured
by the driver.

Bspec: 13991, 52079
Fixes: 592a7c5e ("drm/i915: Extend non readable mcr range")
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200311162300.1838847-2-matthew.d.roper@intel.comReviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
(cherry picked from commit 415d1269)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

This reverts commit 36a6b5d9.

The commit takes care Wa_1604544889 which was fixed on a0 stepping based on
a0 replan. So no SW workaround is required on any stepping now.
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NCaz Yokoyama <caz.yokoyama@intel.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Fixes: 36a6b5d9 ("drm/i915/tgl: Add extra hdc flush workaround")
Link: https://patchwork.freedesktop.org/patch/msgid/1c751032ce79c80c5485cae315f1a9904ce07cac.1583359940.git.caz.yokoyama@intel.com
(cherry picked from commit 175c4d9b)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

Record the initial active element we use when building the next ELSP
submission, so that we can compare against it latter to see if there's
no change.

Fixes: 44d0a9c0 ("drm/i915/execlists: Skip redundant resubmission")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200311092624.10012-2-chris@chris-wilson.co.uk
(cherry picked from commit 60ef5b7a)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

This is a similar bug like the previous case for virmidi: the invalid
running status is kept after receiving a sysex message.

Again the fix is to clear the running status after handling the sysex.

Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/3b4a4e0f232b7afbaf0a843f63d0e538e3029bfd.camel@domdv.de
Link: https://lore.kernel.org/r/20200316090506.23966-3-tiwai@suse.deSigned-off-by: NTakashi Iwai <tiwai@suse.de>

The virmidi driver handles sysex event exceptionally in a short-cut
snd_seq_dump_var_event() call, but this missed the reset of the
running status.  As a result, it may lead to an incomplete command
right after the sysex when an event with the same running status was
queued.

Fix it by clearing the running status properly via alling
snd_midi_event_reset_decode() for that code path.
Reported-by: NAndreas Steinmetz <ast@domdv.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/3b4a4e0f232b7afbaf0a843f63d0e538e3029bfd.camel@domdv.de
Link: https://lore.kernel.org/r/20200316090506.23966-2-tiwai@suse.deSigned-off-by: NTakashi Iwai <tiwai@suse.de>