Add arpt_MARK to xt_mark.

The corresponding userspace update is available at:

http://git.netfilter.org/arptables/commit/?id=4bb2f8340783fd3a3f70aa6f8807428a280f8474Signed-off-by: NZhang Chunyu <zhangcy@cn.fujitsu.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

On x86 allyesconfig build:
The function compiles to 489 bytes of machine code.
It has 25 callsites.

    text    data       bss       dec     hex filename
82441375 22255384 20627456 125324215 7784bb7 vmlinux.before
82434909 22255384 20627456 125317749 7783275 vmlinux
Signed-off-by: NDenys Vlasenko <dvlasenk@redhat.com>
CC: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: David S. Miller <davem@davemloft.net>
CC: Jan Engelhardt <jengelh@medozas.de>
CC: Jiri Pirko <jpirko@redhat.com>
CC: linux-kernel@vger.kernel.org
CC: netdev@vger.kernel.org
CC: netfilter-devel@vger.kernel.org
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

nf_bridge information is only needed for -m physdev, so we can always free
it after POST_ROUTING.  This has the advantage that allocation and free will
typically happen on the same cpu.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

The neigh_header is only needed when we detect DNAT after prerouting
and neigh cache didn't have a mac address for us.

The output port has not been chosen yet so we can re-use the storage
area, bringing struct size down to 32 bytes on x86_64.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Signed-off-by: NJozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Check if mandatory MTYPE, HTYPE and HOST_MASK macros
defined.
Signed-off-by: NSergey Popovich <popovich_sergei@mail.ua>
Signed-off-by: NJozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

HKEY_DATALEN remains defined after first inclusion
of ip_set_hash_gen.h, so it is incorrectly reused
for IPv6 code.

Undefine HKEY_DATALEN in ip_set_hash_gen.h at the end.

Also remove some useless defines of HKEY_DATALEN in
ip_set_hash_{ip{,mark,port},netiface}.c as ip_set_hash_gen.h
defines it correctly for such set types anyway.
Signed-off-by: NSergey Popovich <popovich_sergei@mail.ua>
Signed-off-by: NJozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

So pointers returned by these macros could be
referenced with -> directly.
Signed-off-by: NSergey Popovich <popovich_sergei@mail.ua>
Signed-off-by: NJozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Ensure userspace supplies string not longer than
IPSET_MAX_COMMENT_SIZE.
Signed-off-by: NSergey Popovich <popovich_sergei@mail.ua>
Signed-off-by: NJozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Signed-off-by: NSergey Popovich <popovich_sergei@mail.ua>
Signed-off-by: NJozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Signed-off-by: NSergey Popovich <popovich_sergei@mail.ua>
Signed-off-by: NJozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

We do not need to check tb[IPSET_ATTR_PORT] != NULL before
retrieving port, as this attribute is known to exist due to
ip_set_attr_netorder() returning true only when attribute
exists and it is in network byte order.
Signed-off-by: NSergey Popovich <popovich_sergei@mail.ua>
Signed-off-by: NJozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Statement ret = func1() || func2() returns 0 when both func1()
and func2() return 0, or 1 if func1() or func2() returns non-zero.

However in our case func1() and func2() returns error code on
failure, so it seems good to propagate such error codes, rather
than returning 1 in case of failure.
Signed-off-by: NSergey Popovich <popovich_sergei@mail.ua>
Signed-off-by: NJozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

 * Undefine mtype_data_reset_elem before defining.

 * Remove duplicated mtype_gc_init undefine, move
   mtype_gc_init define closer to mtype_gc define.

 * Use htype instead of HTYPE in IPSET_TOKEN(HTYPE, _create)().

 * Remove PF definition from sets: no more used.
Signed-off-by: NSergey Popovich <popovich_sergei@mail.ua>
Signed-off-by: NJozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

We do not store cidr packed with no match, so there is no
need to make nomatch bitfield.

This simplifies mtype_data_reset_flags() a bit.
Signed-off-by: NSergey Popovich <popovich_sergei@mail.ua>
Signed-off-by: NJozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Offsets and total length returned by the ip_set_elem_len()
calculated incorrectly as initial set element length (i.e.
len parameter) is used multiple times in offset calculations,
also affecting set element total length.

Use initial set element length as start offset, do not add aligned
extension offset to the offset. Return offset as total length of
the set element.

This reduces memory requirements on per element basic for the
hash:* type of sets.

For example output from 'ipset -terse list test-1' on 64-bit PC,
where test-1 is generated via following script:

  #!/bin/bash

  set_name='test-1'

  ipset create "$set_name" hash:net family inet \
              timeout 10800 counters comment \
              hashsize 65536 maxelem 65536

  declare -i o3 o4
  fmt="add $set_name 192.168.%u.%u\n"

  for ((o3 = 0; o3 < 256; o3++)); do
      for ((o4 = 0; o4 < 256; o4++)); do
          printf "$fmt" $o3 $o4
      done
  done |ipset -exist restore

BEFORE this patch is applied

  # ipset -terse list test-1
  Name: test-1
  Type: hash:net
  Revision: 6
  Header: family inet hashsize 65536 maxelem 65536
timeout 10800 counters comment
  Size in memory: 26348440

and AFTER applying patch

  # ipset -terse list test-1
  Name: test-1
  Type: hash:net
  Revision: 6
  Header: family inet hashsize 65536 maxelem 65536
timeout 10800 counters comment
  Size in memory: 7706392
  References: 0
Signed-off-by: NSergey Popovich <popovich_sergei@mail.ua>
Signed-off-by: NJozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

All the ipset functions respect skb->network_header value,
except for ip_set_get_ip4_port() & ip_set_get_ip6_port(). The
functions should use skb_network_offset() to get the transport
header offset.
Signed-off-by: NAlexander Drozdov <al.drozdov@gmail.com>
Signed-off-by: NJozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Signed-off-by: NJozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

"warning: cast to restricted __be32" warnings are fixed
Signed-off-by: NJozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

As xfrm_output_one() is the only caller of skb_dst_pop(), we should
make skb_dst_pop() localized.
Signed-off-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

add an exhaustive set of eBPF tests bringing total to:
test_bpf: Summary: 233 PASSED, 0 FAILED, [0/226 JIT'ed]
Signed-off-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

in-source build of 'make samples/bpf/' was incorrectly
using default compiler instead of invoking clang/llvm.
out-of-source build was ok.

Fixes: a8085782 ("samples: bpf: trivial eBPF program in C")
Signed-off-by: NBrenden Blanco <bblanco@plumgrid.com>
Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Cleanup few MACROS left out in t4_hw.h to be consistent with the
existing ones. Also replace few hardcoded values with MACROS. Also
update comments for some code
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Based on the information given to this driver (via the xmit_more skb flag),
we can defer signaling the host if more packets are on the way. This will help
make the host more efficient since it can potentially process a larger batch of
packets. Implement this optimization.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

pkt_gen->last_ok was not set properly, so after the first burst
pktgen instead of allocating new packet, will reuse old one, advance
eth_type_trans further, which would mean the stack will be seeing very
short bogus packets.

Fixes: 62f64aed ("pktgen: introduce xmit_mode '<start_xmit|netif_receive>'")
Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com>
Acked-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Florian Fainelli says:

====================
net: systemport: interrupt coalescing support

This patch series adds support for RX & TX interrupt coalescing in the
systemport driver.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Similarly to the TX path, allow the RX path to be configured with both
'rx-frames' and 'rx-usecs' coalescing parameters.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add the ability to configure both 'tx-frames' which controls how many frames
are doing to trigger a single interrupt and 'tx-usecs' which dictates how long
to wait before an interrupt should be services.

Since our timer resolution is close to 8.192 us, we round up to the nearest
value the 'tx-usecs' timeout value.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

These functions compile to 60 bytes of machine code each.
With this .config: http://busybox.net/~vda/kernel_config
there are 617 calls of netif_tx_stop_queue()
and 49 calls of netif_tx_stop_all_queues() in vmlinux.

To fix this, remove WARN_ON in netif_tx_stop_queue()
as suggested by davem, and deinline netif_tx_stop_all_queues().

Change in code size is about 20k:

   text      data      bss       dec     hex filename
82426986 22255416 20627456 125309858 77813a2 vmlinux.before
82406248 22255416 20627456 125289120 777c2a0 vmlinux

gcc-4.7.2 still creates deinlined version of netif_tx_stop_queue
sometimes:

$ nm --size-sort vmlinux | grep netif_tx_stop_queue | wc -l
190

ffffffff81b558a8 <netif_tx_stop_queue>:
ffffffff81b558a8:       55                      push   %rbp
ffffffff81b558a9:       48 89 e5                mov    %rsp,%rbp
ffffffff81b558ac:       f0 80 8f e0 01 00 00    lock orb $0x1,0x1e0(%rdi)
ffffffff81b558b3:       01
ffffffff81b558b4:       5d                      pop    %rbp
ffffffff81b558b5:       c3                      retq

This needs additional fixing.
Signed-off-by: NDenys Vlasenko <dvlasenk@redhat.com>
CC: Alexei Starovoitov <alexei.starovoitov@gmail.com>
CC: Alexander Duyck <alexander.duyck@gmail.com>
CC: Joe Perches <joe@perches.com>
CC: David S. Miller <davem@davemloft.net>
CC: Jiri Pirko <jpirko@redhat.com>
CC: linux-kernel@vger.kernel.org
CC: netdev@vger.kernel.org
CC: netfilter-devel@vger.kernel.org
Acked-by: NAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The macvtap driver tries to emulate all the ioctls supported by a normal
tun/tap driver, however it was missing the generic SIOCGIFHWADDR and
SIOCSIFHWADDR ioctls to get and set the mac address that are supported
by tun/tap. This patch adds these.
Signed-off-by: NJustin Cormack <justin@netbsd.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Scott Feldman says:

====================
switchdev: spring cleanup

v7:

Address review comments:

 - [Jiri] split the br_setlink and br_dellink reverts into their own patches
 - [Jiri] some parameter cleanup of rocker's memory allocators
 - [Jiri] pass trans mode as formal parameter rather than hanging off of
     rocker_port.

v6:

Address review comments:

 - [Jiri] split a couple of patches into one-logical-change per patch
 - [Joe Perches] revert checkpatch -f changes for wrapped lines with long
     symbols.

v5:

Address review comments:

 - [Jiri] include Jiri's s/swdev/switchdev rename patches up front.
 - [Jiri] squash some patches.  Now setlink/dellink/getlink patches are in
     three parts: new implementation, convert drivers to new, delete old impl.
 - [Jiri] some minor variable renames
 - [Jiri] use BUG_ON rather than WARN when COMMIT phase fails when PREPARE
     phase said it was safe to come into the water.
 - [Simon] rocker: fix a few transaction prepare-commit cases that were wrong.
     This was the bulk of the changes in v5.

v4:

Well, it was a lot of work, but now prepare-commit transaction model is how
davem advises: if prepare fails, abort the transaction.  The driver must do
resource reservations up front in prepare phase and return those resources if
aborting.  Commit phase would use reserved resources.  The good news is the
driver code (for rocker) now handles resource allocation failures better by not
leaving partially device or driver states.  This is a side-effect of the
prepare phase where state isn't modified; only validation of inputs and
resource reservations happen in the prepare phase.  Since we're supporting
setting attrs and add objs across lower devs in the stacked case, we need to
hold rtnl_lock (or ensure rtnl_lock is held) so lower devs don't move on us
during the prepare-commit transaction.  DSA driver code skips the prepare phase
and goes straight for the commit phase since no up-front allocations are done
and no device failures (that could be detected in the prepare phase) can
happen.

Remove NETIF_F_HW_SWITCH_OFFLOAD from rocker and the swdev_attr_set/get
wrappers.  DSA doesn't set NETIF_F_HW_SWITCH_OFFLOAD, so it can't be in
swdev_attr_set/get.  rocker doesn't need it; or rather can't support
NETIF_F_HW_SWITCH_OFFLOAD being set/cleared at run-time after the device
port is already up and offloading L2/L3.  NETIF_F_HW_SWITCH_OFFLOAD is still
left as a feature flag for drivers that can use it.

Drop the renaming patch for netdev_switch_notifier.  Other renames are a
result of moving to the attr get/set or obj add/del model.  Everything
but the netdev_switch_notifier is still prefixed with "swdev_".

v3:

Move to two-phase prepare-commit transaction model for attr set and obj add.
Driver gets a change in prepare phase to NACK transaction if lack of resources
or support in device.

v2:

Address review comments:

 - [Jiri] squash a few related patches
 - [Roopa] don't remove NETIF_F_HW_SWITCH_OFFLOAD
 - [Roopa] address VLAN setlink/dellink
 - [Ronen] print warning is attr set revert fails

Not address:

 - Using something other than "swdev_" prefix
 - Vendor extentions

The patch set grew a bit to not only support port attr get/set but also add
support for port obj add/del.  Example of port objs are VLAN, FDB entries, and
FIB entries.  The VLAN support now allows the swdev driver to get VLAN ranges
and flags like PVID and "untagged".  Sridhar will be adding FDB obj support
in follow-on patch.

v1:

The main theme of this patch set is to cleanup swdev in preparation for
new features or fixes to be added soon.  We have a pretty good idea now how
to handle stacked drivers in swdev, but there where some loose ends.  For
example, if a set failed in the middle of walking the lower devs, we would
leave the system in an undefined state...there was no way to recover back to
the previous state.  Speaking of sets, also recognize a pattern that most
swdev API accesses are gets or sets of port attributes, so go ahead and make
port attr get/set the central swdev API, and convert everything that is
set-ish/get-ish to this new API.

Features/fixes that should follow from this cleanup:

 - solve the duplicate pkt forwarding issue
 - get/set bridge attrs, like ageing_time, from/to device
 - get/set more bridge port attrs from/to device

There are some rename cleanups tagging along at the end, to give swdev
consistent naming.

And finally, some much needed updates to the switchdev.txt documentation to
hopefully capture the state-of-the-art of swdev.  Hopefully, we can do a better
job keeping this document up-to-date.

Tested with rocker, of course, to make sure nothing functional broke.  There
are a couple minor tweaks to DSA code for getting switch ID and setting STP
updates to use new API, but not expecting amy breakage there.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Much need updated of switchdev documentation to cover what's been
implmented to-date.  There are some XXX comments in the text for
unimplemented or broken items.  I'd like to keep these in there (poor-man's
TODO list) and update the document once each issue is resolved.
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Acked-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Well almost clean: ignore the CHECKs for space after cast operator and some
longer-than-80 char cases where for readability it's better to keep as-is.
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Acked-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Roopa said remove the feature flag for this series and she'll work on
bringing it back if needed at a later date.
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Acked-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The IPv4 FIB ops convert nicely to the switchdev objs and we're left with
only four switchdev ops: port get/set and port add/del.  Other objs will
follow, such as FDB.  So go ahead and convert IPv4 FIB over to switchdev
obj for consistency, anticipating more objs to come.
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Acked-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Acked-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Like bridge_setlink, add switchdev wrapper to handle bridge_getlink and
call into port driver to get port attrs.  For now, only BR_LEARNING and
BR_LEARNING_SYNC are returned.  To add more, we'll probably want to break
away from ndo_dflt_bridge_getlink() and build the netlink skb directly in
the switchdev code.
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Acked-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is revert of:

commit 68e331c7 ("bridge: offload bridge port attributes to switch asic
if feature flag set")

Restore br_dellink back to original and don't call into SELF port driver.
rtnetlink.c:bridge_dellink() already does a call into port driver for SELF.

bridge vlan add/del cmd defaults to MASTER.  From man page for bridge vlan
add/del cmd:

       self   the vlan is configured on the specified physical device.
              Required if the device is the bridge device.

       master the vlan is configured on the software bridge (default).
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Acked-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now we can remove old wrappers for dellink.
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Acked-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Rocker, bonding and team and switch over to the new
switchdev_port_bridge_dellink to avoid duplicating code in each driver.
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Acked-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>