Fixes: eb9d1bf0: "random: only read from /dev/random after its pool has received 128 bits"
Reported-by: Nkernel test robot <lkp@intel.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

The per-CPU variable batched_entropy_uXX is protected by get_cpu_var().
This is just a preempt_disable() which ensures that the variable is only
from the local CPU. It does not protect against users on the same CPU
from another context. It is possible that a preemptible context reads
slot 0 and then an interrupt occurs and the same value is read again.

The above scenario is confirmed by lockdep if we add a spinlock:
| ================================
| WARNING: inconsistent lock state
| 5.1.0-rc3+ #42 Not tainted
| --------------------------------
| inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
| ksoftirqd/9/56 [HC0[0]:SC1[1]:HE0:SE0] takes:
| (____ptrval____) (batched_entropy_u32.lock){+.?.}, at: get_random_u32+0x3e/0xe0
| {SOFTIRQ-ON-W} state was registered at:
|   _raw_spin_lock+0x2a/0x40
|   get_random_u32+0x3e/0xe0
|   new_slab+0x15c/0x7b0
|   ___slab_alloc+0x492/0x620
|   __slab_alloc.isra.73+0x53/0xa0
|   kmem_cache_alloc_node+0xaf/0x2a0
|   copy_process.part.41+0x1e1/0x2370
|   _do_fork+0xdb/0x6d0
|   kernel_thread+0x20/0x30
|   kthreadd+0x1ba/0x220
|   ret_from_fork+0x3a/0x50
…
| other info that might help us debug this:
|  Possible unsafe locking scenario:
|
|        CPU0
|        ----
|   lock(batched_entropy_u32.lock);
|   <Interrupt>
|     lock(batched_entropy_u32.lock);
|
|  *** DEADLOCK ***
|
| stack backtrace:
| Call Trace:
…
|  kmem_cache_alloc_trace+0x20e/0x270
|  ipmi_alloc_recv_msg+0x16/0x40
…
|  __do_softirq+0xec/0x48d
|  run_ksoftirqd+0x37/0x60
|  smpboot_thread_fn+0x191/0x290
|  kthread+0xfe/0x130
|  ret_from_fork+0x3a/0x50

Add a spinlock_t to the batched_entropy data structure and acquire the
lock while accessing it. Acquire the lock with disabled interrupts
because this function may be used from interrupt context.

Remove the batched_entropy_reset_lock lock. Now that we have a lock for
the data scructure, we can access it from a remote CPU.
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Explain what these functions are for and when they offer
an advantage over get_random_bytes().

(We still need documentation on rng_is_initialized(), the
random_ready_callback system, and early boot in general.)
Signed-off-by: NGeorge Spelvin <lkml@sdf.org>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

When the system boots with random.trust_cpu=1 it doesn't initialize the
per-NUMA CRNGs because it skips the rest of the CRNG startup code. This
means that the code from 1e7f583a ("random: make /dev/urandom scalable
for silly userspace programs") is not used when random.trust_cpu=1.

crash> dmesg | grep random:
[    0.000000] random: get_random_bytes called from start_kernel+0x94/0x530 with crng_init=0
[    0.314029] random: crng done (trusting CPU's manufacturer)
crash> print crng_node_pool
$6 = (struct crng_state **) 0x0

After adding the missing call to numa_crng_init() the per-NUMA CRNGs are
initialized again:

crash> dmesg | grep random:
[    0.000000] random: get_random_bytes called from start_kernel+0x94/0x530 with crng_init=0
[    0.314031] random: crng done (trusting CPU's manufacturer)
crash> print crng_node_pool
$1 = (struct crng_state **) 0xffff9a915f4014a0

The call to invalidate_batched_entropy() was also missing. This is
important for architectures like PPC and S390 which only have the
arch_get_random_seed_* functions.

Fixes: 39a8883a ("random: add a config option to trust the CPU's hwrng")
Signed-off-by: NJon DeVree <nuxi@vault24.org>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Right now rand_initialize() is run as an early_initcall(), but it only
depends on timekeeping_init() (for mixing ktime_get_real() into the
pools). However, the call to boot_init_stack_canary() for stack canary
initialization runs earlier, which triggers a warning at boot:

random: get_random_bytes called from start_kernel+0x357/0x548 with crng_init=0

Instead, this moves rand_initialize() to after timekeeping_init(), and moves
canary initialization here as well.

Note that this warning may still remain for machines that do not have
UEFI RNG support (which initializes the RNG pools during setup_arch()),
or for x86 machines without RDRAND (or booting without "random.trust=on"
or CONFIG_RANDOM_TRUST_CPU=y).
Signed-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Immediately after boot, we allow reads from /dev/random before its
entropy pool has been fully initialized.  Fix this so that we don't
allow this until the blocking pool has received 128 bits.

We do this by repurposing the initialized flag in the entropy pool
struct, and use the initialized flag in the blocking pool to indicate
whether it is safe to pull from the blocking pool.

To do this, we needed to rework when we decide to push entropy from the
input pool to the blocking pool, since the initialized flag for the
input pool was used for this purpose.  To simplify things, we no
longer use the initialized flag for that purpose, nor do we use the
entropy_total field any more.
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Since the definition of struct crng_state is private to random.c, and
primary_crng is neither declared or used elsewhere, there's no reason
for that symbol to have external linkage.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

This field is never used, might as well remove it.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Never modified, might as well be put in .rodata.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

In preparation for adding XChaCha12 support, rename/refactor
chacha20-generic to support different numbers of rounds.  The
justification for needing XChaCha12 support is explained in more detail
in the patch "crypto: chacha - add XChaCha12 support".

The only difference between ChaCha{8,12,20} are the number of rounds
itself; all other parts of the algorithm are the same.  Therefore,
remove the "20" from all definitions, structures, functions, files, etc.
that will be shared by all ChaCha versions.

Also make ->setkey() store the round count in the chacha_ctx (previously
chacha20_ctx).  The generic code then passes the round count through to
chacha_block().  There will be a ->setkey() function for each explicitly
allowed round count; the encrypt/decrypt functions will be the same.  I
decided not to do it the opposite way (same ->setkey() function for all
round counts, with different encrypt/decrypt functions) because that
would have required more boilerplate code in architecture-specific
implementations of ChaCha and XChaCha.
Reviewed-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: NMartin Willi <martin@strongswan.org>
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

In commit 9f480fae ("crypto: chacha20 - Fix keystream alignment for
chacha20_block()"), I had missed that chacha20_block() can be called
directly on the buffer passed to get_random_bytes(), which can have any
alignment.  So, while my commit didn't break anything, it didn't fully
solve the alignment problems.

Revert my solution and just update chacha20_block() to use
put_unaligned_le32(), so the output buffer need not be aligned.
This is simpler, and on many CPUs it's the same speed.

But, I kept the 'tmp' buffers in extract_crng_user() and
_get_random_bytes() 4-byte aligned, since that alignment is actually
needed for _crng_backtrack_protect() too.
Reported-by: NStephan Müller <smueller@chronox.de>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Instead of forcing a distro or other system builder to choose
at build time whether the CPU is trusted for CRNG seeding via
CONFIG_RANDOM_TRUST_CPU, provide a boot-time parameter for end users to
control the choice. The CONFIG will set the default state instead.
Signed-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

It is very useful to be able to know whether or not get_random_bytes_wait
/ wait_for_random_bytes is going to block or not, or whether plain
get_random_bytes is going to return good randomness or bad randomness.

The particular use case is for mitigating certain attacks in WireGuard.
A handshake packet arrives and is queued up. Elsewhere a worker thread
takes items from the queue and processes them. In replying to these
items, it needs to use some random data, and it has to be good random
data. If we simply block until we can have good randomness, then it's
possible for an attacker to fill the queue up with packets waiting to be
processed. Upon realizing the queue is full, WireGuard will detect that
it's under a denial of service attack, and behave accordingly. A better
approach is just to drop incoming handshake packets if the crng is not
yet initialized.

This patch, therefore, makes that information directly accessible.
Signed-off-by: NJason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

No need to keep preemption disabled across the whole function.

mix_pool_bytes() uses a spin_lock() to protect the pool and there are
other places like write_pool() whhich invoke mix_pool_bytes() without
disabling preemption.
credit_entropy_bits() is invoked from other places like
add_hwgenerator_randomness() without disabling preemption.

Before commit 95b709b6 ("random: drop trickle mode") the function
used __this_cpu_inc_return() which would require disabled preemption.
The preempt_disable() section was added in commit 43d5d3018c37 ("[PATCH]
random driver preempt robustness", history tree).  It was claimed that
the code relied on "vt_ioctl() being called under BKL".

Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
[bigeasy: enhance the commit message]
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

This gives the user building their own kernel (or a Linux
distribution) the option of deciding whether or not to trust the CPU's
hardware random number generator (e.g., RDRAND for x86 CPU's) as being
correctly implemented and not having a back door introduced (perhaps
courtesy of a Nation State's law enforcement or intelligence
agencies).

This will prevent getrandom(2) from blocking, if there is a
willingness to trust the CPU manufacturer.
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Currently the function get_random_bytes_arch() has return value 'void'.
If the hw RNG fails we currently fall back to using get_random_bytes().
This defeats the purpose of requesting random material from the hw RNG
in the first place.

There are currently no intree users of get_random_bytes_arch().

Only get random bytes from the hw RNG, make function return the number
of bytes retrieved from the hw RNG.
Acked-by: NTheodore Ts'o <tytso@mit.edu>
Reviewed-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: NTobin C. Harding <me@tobin.cc>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

There are a couple of whitespace issues around the function
get_random_bytes_arch().  In preparation for patching this function
let's clean them up.
Acked-by: NTheodore Ts'o <tytso@mit.edu>
Signed-off-by: NTobin C. Harding <me@tobin.cc>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Fedora has integrated the jitter entropy daemon to work around slow
boot problems, especially on VM's that don't support virtio-rng:

    https://bugzilla.redhat.com/show_bug.cgi?id=1572944

It's understandable why they did this, but the Jitter entropy daemon
works fundamentally on the principle: "the CPU microarchitecture is
**so** complicated and we can't figure it out, so it *must* be
random".  Yes, it uses statistical tests to "prove" it is secure, but
AES_ENCRYPT(NSA_KEY, COUNTER++) will also pass statistical tests with
flying colors.

So if RDRAND is available, mix it into entropy submitted from
userspace.  It can't hurt, and if you believe the NSA has backdoored
RDRAND, then they probably have enough details about the Intel
microarchitecture that they can reverse engineer how the Jitter
entropy daemon affects the microarchitecture, and attack its output
stream.  And if RDRAND is in fact an honest DRNG, it will immeasurably
improve on what the Jitter entropy daemon might produce.

This also provides some protection against someone who is able to read
or set the entropy seed file.
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>

The poll() changes were not well thought out, and completely
unexplained.  They also caused a huge performance regression, because
"->poll()" was no longer a trivial file operation that just called down
to the underlying file operations, but instead did at least two indirect
calls.

Indirect calls are sadly slow now with the Spectre mitigation, but the
performance problem could at least be largely mitigated by changing the
"->get_poll_head()" operation to just have a per-file-descriptor pointer
to the poll head instead.  That gets rid of one of the new indirections.

But that doesn't fix the new complexity that is completely unwarranted
for the regular case.  The (undocumented) reason for the poll() changes
was some alleged AIO poll race fixing, but we don't make the common case
slower and more complex for some uncommon special case, so this all
really needs way more explanations and most likely a fundamental
redesign.

[ This revert is a revert of about 30 different commits, not reverted
  individually because that would just be unnecessarily messy  - Linus ]

Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The big change is that random_read_wait and random_write_wait are merged
into a single waitqueue that uses keyed wakeups.  Because wait_event_*
doesn't know about that this will lead to occassional spurious wakeups
in _random_read and add_hwgenerator_randomness, but wait_event_* is
designed to handle these and were are not in a a hot path there.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NTheodore Ts'o <tytso@mit.edu>
Reviewed-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

On systems without sufficient boot randomness, no point spamming dmesg.
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org

We can do a sleeping allocation from an irq context when CONFIG_NUMA
is enabled.  Fix this by initializing the NUMA crng instances in a
workqueue.
Reported-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot+9de458f6a5e713ee8c1a@syzkaller.appspotmail.com
Fixes: 8ef35c86 ("random: set up the NUMA crng instances...")
Cc: stable@vger.kernel.org
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Add a new ioctl which forces the the crng to be reseeded.
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org

Reported-by: NJann Horn <jannh@google.com>
Fixes: 1e7f583a ("random: make /dev/urandom scalable for silly...")
Cc: stable@kernel.org # 4.8+
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Reviewed-by: NJann Horn <jannh@google.com>

Until the primary_crng is fully initialized, don't initialize the NUMA
crng nodes.  Otherwise users of /dev/urandom on NUMA systems before
the CRNG is fully initialized can get very bad quality randomness.  Of
course everyone should move to getrandom(2) where this won't be an
issue, but there's a lot of legacy code out there.  This related to
CVE-2018-1108.
Reported-by: NJann Horn <jannh@google.com>
Fixes: 1e7f583a ("random: make /dev/urandom scalable for silly...")
Cc: stable@kernel.org # 4.8+
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

add_device_randomness() use of crng_fast_load() was highly
problematic.  Some callers of add_device_randomness() can pass in a
large amount of static information.  This would immediately promote
the crng_init state from 0 to 1, without really doing much to
initialize the primary_crng's internal state with something even
vaguely unpredictable.

Since we don't have the speed constraints of add_interrupt_randomness(),
we can do a better job mixing in the what unpredictability a device
driver or architecture maintainer might see fit to give us, and do it
in a way which does not bump the crng_init_cnt variable.

Also, since add_device_randomness() doesn't bump any entropy
accounting in crng_init state 0, mix the device randomness into the
input_pool entropy pool as well.  This is related to CVE-2018-1108.
Reported-by: NJann Horn <jannh@google.com>
Fixes: ee7998c5 ("random: do not ignore early device randomness")
Cc: stable@kernel.org # 4.13+
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

The crng_init variable has three states:

0: The CRNG is not initialized at all
1: The CRNG has a small amount of entropy, hopefully good enough for
   early-boot, non-cryptographical use cases
2: The CRNG is fully initialized and we are sure it is safe for
   cryptographic use cases.

The crng_ready() function should only return true once we are in the
last state.  This addresses CVE-2018-1108.
Reported-by: NJann Horn <jannh@google.com>
Fixes: e192be9d ("random: replace non-blocking pool...")
Cc: stable@kernel.org # 4.8+
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Reviewed-by: NJann Horn <jannh@google.com>

Ever since "random: kill dead extract_state struct" [1], the
dont_count_entropy member of struct timer_rand_state has been
effectively unused. Since it hasn't found a new use in 12 years, it's
probably safe to finally kill it.

[1] Pre-git, https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/?id=c1c48e61c251f57e7a3f1bf11b3c462b2de9dcb5Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

add_interrupt_randomess always wakes up
code blocking on /dev/random. This wake up is done
unconditionally. Unfortunately this means all interrupts
take the wait queue spinlock, which can be rather expensive
on large systems processing lots of interrupts.

We saw 1% cpu time spinning on this on a large macro workload
running on a large system.

I believe it's a recent regression (?)

Always check if there is a waiter on the wait queue
before waking up. This check can be done without
taking a spinlock.

1.06%         10460  [kernel.vmlinux] [k] native_queued_spin_lock_slowpath
         |
         ---native_queued_spin_lock_slowpath
            |
             --0.57%--_raw_spin_lock_irqsave
                       |
                        --0.56%--__wake_up_common_lock
                                  credit_entropy_bits
                                  add_interrupt_randomness
                                  handle_irq_event_percpu
                                  handle_irq_event
                                  handle_edge_irq
                                  handle_irq
                                  do_IRQ
                                  common_interrupt
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

This fixes a harmless UBSAN where root could potentially end up
causing an overflow while bumping the entropy_total field (which is
ignored once the entropy pool has been initialized, and this generally
is completed during the boot sequence).

This is marginal for the stable kernel series, but it's a really
trivial patch, and it fixes UBSAN warning that might cause security
folks to get overly excited for no reason.
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Reported-by: NChen Feng <puck.chen@hisilicon.com>
Cc: stable@vger.kernel.org

This is the mindless scripted replacement of kernel use of POLL*
variables as described by Al, done by this script:

    for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
        L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
        for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done
    done

with de-mangling cleanups yet to come.

NOTE! On almost all architectures, the EPOLL* constants have the same
values as the POLL* constants do.  But they keyword here is "almost".
For various bad reasons they aren't the same, and epoll() doesn't
actually work quite correctly in some cases due to this on Sparc et al.

The next patch from Al will sort out the final differences, and we
should be all done.
Scripted-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When chacha20_block() outputs the keystream block, it uses 'u32' stores
directly.  However, the callers (crypto/chacha20_generic.c and
drivers/char/random.c) declare the keystream buffer as a 'u8' array,
which is not guaranteed to have the needed alignment.

Fix it by having both callers declare the keystream as a 'u32' array.
For now this is preferable to switching over to the unaligned access
macros because chacha20_block() is only being used in cases where we can
easily control the alignment (stack buffers).
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Patch series "kmemcheck: kill kmemcheck", v2.

As discussed at LSF/MM, kill kmemcheck.

KASan is a replacement that is able to work without the limitation of
kmemcheck (single CPU, slow).  KASan is already upstream.

We are also not aware of any users of kmemcheck (or users who don't
consider KASan as a suitable replacement).

The only objection was that since KASAN wasn't supported by all GCC
versions provided by distros at that time we should hold off for 2
years, and try again.

Now that 2 years have passed, and all distros provide gcc that supports
KASAN, kill kmemcheck again for the very same reasons.

This patch (of 4):

Remove kmemcheck annotations, and calls to kmemcheck from the kernel.

[alexander.levin@verizon.com: correctly remove kmemcheck call from dma_map_sg_attrs]
  Link: http://lkml.kernel.org/r/20171012192151.26531-1-alexander.levin@verizon.com
Link: http://lkml.kernel.org/r/20171007030159.22241-2-alexander.levin@verizon.comSigned-off-by: NSasha Levin <alexander.levin@verizon.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tim Hansen <devtimhansen@gmail.com>
Cc: Vegard Nossum <vegardno@ifi.uio.no>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns to READ_ONCE()/WRITE_ONCE()

Please do not apply this to mainline directly, instead please re-run the
coccinelle script shown below and apply its output.

For several reasons, it is desirable to use {READ,WRITE}_ONCE() in
preference to ACCESS_ONCE(), and new code is expected to use one of the
former. So far, there's been no reason to change most existing uses of
ACCESS_ONCE(), as these aren't harmful, and changing them results in
churn.

However, for some features, the read/write distinction is critical to
correct operation. To distinguish these cases, separate read/write
accessors must be used. This patch migrates (most) remaining
ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following
coccinelle script:

----
// Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and
// WRITE_ONCE()

// $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch

virtual patch

@ depends on patch @
expression E1, E2;
@@

- ACCESS_ONCE(E1) = E2
+ WRITE_ONCE(E1, E2)

@ depends on patch @
expression E;
@@

- ACCESS_ONCE(E)
+ READ_ONCE(E)
----
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: davem@davemloft.net
Cc: linux-arch@vger.kernel.org
Cc: mpe@ellerman.id.au
Cc: shuah@kernel.org
Cc: snitzer@redhat.com
Cc: thor.thayer@linux.intel.com
Cc: tj@kernel.org
Cc: viro@zeniv.linux.org.uk
Cc: will.deacon@arm.com
Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Fix the warning message on the parisc and IA64 architectures to show the
correct function name of the caller by using %pS instead of %pF. The
message is printed with the value of _RET_IP_ which calls
__builtin_return_address(0) and as such returns the IP address caller
instead of pointer to a function descriptor of the caller.

The effect of this patch is visible on the parisc and ia64 architectures
only since those are the ones which use function descriptors while on
all others %pS and %pF will behave the same.

Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: NHelge Deller <deller@gmx.de>
Fixes: eecabf56 ("random: suppress spammy warnings about unseeded randomness")
Fixes: d06bfd19 ("random: warn when kernel uses unseeded randomness")
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Avoid the READ_ONCE in commit 4a072c71 ("random: silence compiler
warnings and fix race") if we can leave the function after
arch_get_random_XXX().

Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Unfortunately, on some models of some architectures getting a fully
seeded CRNG is extremely difficult, and so this can result in dmesg
getting spammed for a surprisingly long time.  This is really bad from
a security perspective, and so architecture maintainers really need to
do what they can to get the CRNG seeded sooner after the system is
booted.  However, users can't do anything actionble to address this,
and spamming the kernel messages log will only just annoy people.

For developers who want to work on improving this situation,
CONFIG_WARN_UNSEEDED_RANDOM has been renamed to
CONFIG_WARN_ALL_UNSEEDED_RANDOM.  By default the kernel will always
print the first use of unseeded randomness.  This way, hopefully the
security obsessed will be happy that there is _some_ indication when
the kernel boots there may be a potential issue with that architecture
or subarchitecture.  To see all uses of unseeded randomness,
developers can enable CONFIG_WARN_ALL_UNSEEDED_RANDOM.
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

The add_device_randomness() function would ignore incoming bytes if the
crng wasn't ready.  This additionally makes sure to make an early enough
call to add_latent_entropy() to influence the initial stack canary,
which is especially important on non-x86 systems where it stays the same
through the life of the boot.

Link: http://lkml.kernel.org/r/20170626233038.GA48751@beastSigned-off-by: NKees Cook <keescook@chromium.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jessica Yu <jeyu@redhat.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This enables an important dmesg notification about when drivers have
used the crng without it being seeded first. Prior, these errors would
occur silently, and so there hasn't been a great way of diagnosing these
types of bugs for obscure setups. By adding this as a config option, we
can leave it on by default, so that we learn where these issues happen,
in the field, will still allowing some people to turn it off, if they
really know what they're doing and do not want the log entries.

However, we don't leave it _completely_ by default. An earlier version
of this patch simply had `default y`. I'd really love that, but it turns
out, this problem with unseeded randomness being used is really quite
present and is going to take a long time to fix. Thus, as a compromise
between log-messages-for-all and nobody-knows, this is `default y`,
except it is also `depends on DEBUG_KERNEL`. This will ensure that the
curious see the messages while others don't have to.
Signed-off-by: NJason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>