DEBUG_WAITQ appears to have been removed by others, but no one
removed the configuration option from ARM.  Remote it from both
Kconfig.debug and all default configurations.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

More semaphore-as-mutex to mutex conversions.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

These files want to provide/access ELF hwcap information, so should
be including asm/elf.h rather than asm/procinfo.h
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Fix an apparant hang with the "apm -s" command.  We omitted to wake up
this process once resume had completed.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The APM emulation can sometimes cause suspend to fail to work due
to apparantly waiting for some process to acknowledge an event when
it actually has already done so.  We re-jig the event handling to
work around this behaviour.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

smp_call_function() will be used with the MP/core oprofile support
patch.  Export it as _GPL.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Eliminate two warnings:

kernel/power/pm.c:205: warning: 'pm_register' is deprecated (declared at kernel/power/pm.c:64)
kernel/power/pm.c:206: warning: 'pm_send_all' is deprecated (declared at kernel/power/pm.c:180)

by updating defconfig files to contain a sensible PM_LEGACY default.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

/*
 * Note: Drivers should NOT use this function directly, as it will break
 * platforms with CONFIG_DMABOUNCE.
 * Use the driver DMA support - see dma-mapping.h (dma_sync_*)
 */
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Remove two warnings:
drivers/serial/8250_early.c:136: warning: unused variable 'mapsize'
include/linux/io.h:47: warning: passing argument 1 of '__readb' discards qualifiers from pointer target type
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

ARM doesn't source drivers/Kconfig like most architectures do, so the
newly added drivers/ata is currently not made available on ARM.  SATA
is used on some ARM machines, like the Thecus N2100, so we need to
source drivers/ata/Kconfig.
Signed-off-by: NMartin Michlmayr <tbm@cyrius.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

OP_MAX_COUNTER never referenced, and is a reminant of an earlier
oprofile implementation.  Remove it.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Most ARM defconfigs don't actually need to have PM_LEGACY enabled.
Disable it for ATEB9200, Collie, IXP4xx, OMAP H2, S3C2410 and
Versatile.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch adds platform devices' registration for the devices which drivers
either have been added to the mainline or on the way to.

 arch/arm/mach-pnx4008/core.c |   69 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 69 insertions(+)
Signed-off-by: NVitaly Wool <vitalywool@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

show_mem() was not correctly handling holes in the memory
map.  It was treating the freed sections of the map as
though they contained valid struct page entries.  This
could cause incorrect debugging output or even a kernel
panic.

This patch keeps the struct meminfo around after system
initialization so that show_mem() can use it when
scanning memory.  show_mem() now walks over each bank
of each online node, rather than assuming that each node
contains a single contiguous bank.
Signed-off-by: NRay Lehtiniemi <rayl@mail.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The timer LED is unusable at HZ=large, since it's got
a hard-wired value of 100 ticks per cycle; when HZ=1024
(for example) it's essentially always-on.  This patch
just makes that be HZ ticks per cycle.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Add the new drivers, such as SPI, LED and RTC core,
to the s3c2410_defconfig.
Signed-off-by: NBen Dooks <ben-linux@fluff.irg>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Update the s3c2410_defconfig to 2.6.19-rc4
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Remove the bast_defconfig, as it has not been updated
since 2.6.13. The s3c2410_defconfig should be a good
replacement.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Remove the smdk2410_defconifg as it is out of data
and has not been touched since 2.6.11.

Use the s3c2410_defconfig instead.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This is a rework of the ixp4xx irq_chip implementation.  The use of
two irq_chip structures and potentially switching between them is a
violation of the intended use of the IRQ framework.  The current
implementation does not work with current in-kernel spinlock debugging
or lockdep due to lock recursion problems caused by calling
set_irq_chip/handler from within the chip's set_irq_type().

This patch goes back to using one irq_chip structure and handling the
differences between edge/level, normal/GPIO interrupts inside the
ack/mask/unmask routines themselves.
Signed-off-by: NKevin Hilman <khilman@mvista.com>
Signed-off-by: NDeepak Saxena <dsaxena@mvista.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

ARM patch 3756/1 added HWCAP_IWMMXT.  This patch adds support
for broadcasting that info via /proc/cpuinfo and sets it for
the CPU features of the PXA270.

I've booted 19rc3 on a pxa270 and confirmed that the /proc/cpuinfo
shows "iwmmxt" in the Features.
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NNicolas Pitre <nico@cam.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

s3c2410_gpio_getirq() holds for the S3C2412 build,
so ensure that it gets built for all the current
S3C24XX architectures
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

dma_sync_single is no more (and to be removed in 2.7) so this export should be dma_sync_single_for_cpu.

Also export dma_sync_single_for_device.
Signed-off-by: NKevin Hilman <khilman@mvista.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

"K4S281632b-1H" should read "K4S281632B-1H" (As it does everywhere
else). No more coffe!
Signed-off-by: NKristoffer Ericson <Kristoffer_e1@hotmail.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The second ethernet port on the Thecus n2100 was incorrectly assigned
to XINT1 instead of the correct XINT3 (PCI INTB instead of INTD), which
caused that port to be non-functional.
Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Add support for KBUILD_IMAGE on ARM.  This takes the usual target
specifiers (zImage/Image/etc) in the same way that powerpc does
(iow, without the arch/arm/boot prefix).
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The SIGFPE signal should be generated if Division by Zero exception is detected.
Signed-off-by: NTakashi Ohmasa <ohmasa.takashi@jp.panasonic.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The significand should be shifted until the value of bit [62] is 1
to normalize the denormal double number.
Signed-off-by: NTakashi Ohmasa <ohmasa.takashi@jp.panasonic.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The IRQ changes a while back broke the build for SMP machines.
Fix up the SMP code to use set_irq_regs/get_irq_regs as
appropriate.  Also, fix a warning in arch/arm/kernel/time.c
where 'regs' becomes unused for SMP builds.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Add a vmlinux.lds.h helper macro for defining the eight-level initcall table,
teach all the architectures to use it.

This is a prerequisite for a patch which performs initcall synchronisation for
multithreaded-probing.

Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
[ Added AVR32 as well ]
Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

HAS_TOUCHSCREEN_ADS7843_LH7 and HAS_TOUCHSCREEN_ADC_LH7 are referenced
but not defined in the LH7A40x configuration.  Comment them out to
prevent them causing warnings.

Marc Singer said:

   Feel free to remove the Kconfig lines.  I'll add it back with
   the rest of the config entries.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

A couple of missing semicolons.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Fix one more compile breakage caused by the post -rc1 IRQ changes.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Some ARM platforms were still broken as a result of the IRQ register
passing changes, mostly due to a missing linux/irq.h include.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This adds correct sdram params for K4S281632B-1H and sets the jornada to use them by default.

Signed-off-by: Kristoffer Ericson
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The new Atmel AT91SAM9261 and AT91SAM9260 processors use a different
internal watchdog peripheral.  This watchdog driver is therefore
AT91RM9200-specific.

This patch renames at91_wdt.c to at91rm9200_wdt.c, and changes the name
of the configuration option.
Signed-off-by: NAndrew Victor <andrew@sanpeople.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>