This patch adds support for the new advertising add interface, with the
first command setting advertising parameters and the second to set
advertising data. The set parameters command allows the caller to leave
some fields "unset", with a params bitfield defining which params were
purposefully set. Unset parameters will be given defaults when calling
hci_add_adv_instance. The data passed to the param mgmt command is
allowed to be flexible, so in the future if bluetoothd passes a larger
structure with new params, the mgmt command will ignore the unknown
members at the end.

This change has been validated on both hatch (extended advertising) and
kukui (no extended advertising) chromebooks running bluetoothd that
support this new interface. I ran the following manual tests:
- Set several (3) advertisements using modified test_advertisement.py
- For each, validate correct data and parameters in btmon trace
- Verified both for software rotation and extended adv

Automatic test suite also run, testing many (25) scenarios of single and
multi-advertising for data/parameter correctness.
Reviewed-by: NSonny Sasaka <sonnysasaka@chromium.org>
Signed-off-by: NDaniel Winkler <danielwinkler@google.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

We wish to handle advertising data separately from advertising
parameters in our new MGMT requests. This change adds a helper that
allows the advertising data and scan response to be updated for an
existing advertising instance.
Reviewed-by: NSonny Sasaka <sonnysasaka@chromium.org>
Signed-off-by: NDaniel Winkler <danielwinkler@google.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

This patch add a configurable parameter to switch off the interleave
scan feature.
Signed-off-by: NHoward Chung <howardchung@google.com>
Reviewed-by: NAlain Michaud <alainm@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

Refactor read default system configuration function so that it's capable
of returning different types than u16
Signed-off-by: NHoward Chung <howardchung@google.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

This patch adds code to handle the active scan during interleave
scan. The interleave scan will be canceled when users start active scan,
and it will be restarted after active scan stopped.
Signed-off-by: NHoward Chung <howardchung@google.com>
Reviewed-by: NAlain Michaud <alainm@chromium.org>
Reviewed-by: NManish Mandlik <mmandlik@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

This patch adds code to handle the system suspension during interleave
scan. The interleave scan will be canceled when the system is going to
sleep, and will be restarted after waking up.
Signed-off-by: NHoward Chung <howardchung@google.com>
Reviewed-by: NAlain Michaud <alainm@chromium.org>
Reviewed-by: NManish Mandlik <mmandlik@chromium.org>
Reviewed-by: NAbhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reviewed-by: NMiao-chen Chou <mcchou@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

This patch implements the interleaving between allowlist scan and
no-filter scan. It'll be used to save power when at least one monitor is
registered and at least one pending connection or one device to be
scanned for.

The durations of the allowlist scan and the no-filter scan are
controlled by MGMT command: Set Default System Configuration. The
default values are set randomly for now.
Signed-off-by: NHoward Chung <howardchung@google.com>
Reviewed-by: NAlain Michaud <alainm@chromium.org>
Reviewed-by: NManish Mandlik <mmandlik@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

During controller initialization, an LE Set RPA Timeout command is sent
to the controller if supported. However, the value checked to determine
if the command is supported is incorrect. Page 1921 of the Bluetooth
Core Spec v5.2 shows that bit 2 of octet 35 of the Supported_Commands
field corresponds to the LE Set RPA Timeout command, but currently
bit 6 of octet 35 is checked. This patch checks the correct value
instead.

This issue led to the error seen in the following btmon output during
initialization of an adapter (rtl8761b) and prevented initialization
from completing.

< HCI Command: LE Set Resolvable Private Address Timeout (0x08|0x002e) plen 2
        Timeout: 900 seconds
> HCI Event: Command Complete (0x0e) plen 4
      LE Set Resolvable Private Address Timeout (0x08|0x002e) ncmd 2
        Status: Unsupported Remote Feature / Unsupported LMP Feature (0x1a)
= Close Index: 00:E0:4C:6B:E5:03

The error did not appear when running with this patch.
Signed-off-by: NEdward Vear <edwardvear@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

This renames get_adv_instance_scan_rsp to adv_instance_is_scannable and
make it return a bool since it was not actually properly return the size
of the scan response as one could expect.
Signed-off-by: NLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

Current code is actually failing on the following tests of mgmt-tester
because get_adv_instance_scan_rsp_len did not account for flags that
cause scan response data to be included resulting in non-scannable
instance when in fact it should be scannable.
Signed-off-by: NLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

This test case is meant to verify that multiple
unknown options is included in the response.

BLUETOOTH CORE SPECIFICATION Version 5.2 | Vol 3, Part A
page 1057

'On an unknown option failure (Result=0x0003),
the option(s) that contain anoption type field that is not
understood by the recipient of the L2CAP_CONFIGURATION_REQ
packet shall be included in the L2CAP_CONFIGURATION_RSP
packet unless they are hints.'

Before this patch:

> ACL Data RX: Handle 11 flags 0x02 dlen 24
      L2CAP: Configure Request (0x04) ident 18 len 16
        Destination CID: 64
        Flags: 0x0000
        Option: Unknown (0x10) [mandatory]
        10 00 11 02 11 00 12 02 12 00
< ACL Data TX: Handle 11 flags 0x00 dlen 17
      L2CAP: Configure Response (0x05) ident 18 len 9
        Source CID: 64
        Flags: 0x0000
        Result: Failure - unknown options (0x0003)
        Option: Unknown (0x10) [mandatory]
        12

After this patch:

> ACL Data RX: Handle 11 flags 0x02 dlen 24
      L2CAP: Configure Request (0x04) ident 5 len 16
        Destination CID: 64
        Flags: 0x0000
        Option: Unknown (0x10) [mandatory]
        10 00 11 02 11 00 12 02 12 00
< ACL Data TX: Handle 11 flags 0x00 dlen 23
      L2CAP: Configure Response (0x05) ident 5 len 15
        Source CID: 64
        Flags: 0x0000
        Result: Failure - unknown options (0x0003)
        Option: Unknown (0x10) [mandatory]
        10 11 01 11 12 01 12
Signed-off-by: NJimmy Wahlberg <jimmywa@spotify.com>
Reviewed-by: NLuiz Augusto Von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

This commit add the invalid check for connected socket, without it will
causes the following crash due to sco_pi(sk)->conn being NULL:

KASAN: null-ptr-deref in range [0x0000000000000050-0x0000000000000057]
CPU: 3 PID: 4284 Comm: test_sco Not tainted 5.10.0-rc3+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014
RIP: 0010:sco_sock_getsockopt+0x45d/0x8e0
Code: 48 c1 ea 03 80 3c 02 00 0f 85 ca 03 00 00 49 8b 9d f8 04 00 00 48 b8 00
      00 00 00 00 fc ff df 48 8d 7b 50 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84
      c0 74 08 3c 03 0f 8e b5 03 00 00 8b 43 50 48 8b 0c
RSP: 0018:ffff88801bb17d88 EFLAGS: 00010206
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff83a4ecdf
RDX: 000000000000000a RSI: ffffc90002fce000 RDI: 0000000000000050
RBP: 1ffff11003762fb4 R08: 0000000000000001 R09: ffff88810e1008c0
R10: ffffffffbd695dcf R11: fffffbfff7ad2bb9 R12: 0000000000000000
R13: ffff888018ff1000 R14: dffffc0000000000 R15: 000000000000000d
FS:  00007fb4f76c1700(0000) GS:ffff88811af80000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005555e3b7a938 CR3: 00000001117be001 CR4: 0000000000770ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
 ? sco_skb_put_cmsg+0x80/0x80
 ? sco_skb_put_cmsg+0x80/0x80
 __sys_getsockopt+0x12a/0x220
 ? __ia32_sys_setsockopt+0x150/0x150
 ? syscall_enter_from_user_mode+0x18/0x50
 ? rcu_read_lock_bh_held+0xb0/0xb0
 __x64_sys_getsockopt+0xba/0x150
 ? syscall_enter_from_user_mode+0x1d/0x50
 do_syscall_64+0x33/0x40
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 0fc1a726 ("Bluetooth: sco: new getsockopt options BT_SNDMTU/BT_RCVMTU")
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: NLuiz Augusto Von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

Signed-off-by: NReo Shiseki <reoshiseki@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

This replaces the BT_DBG function to bt_dev_dbg as it is cleaner to show
the controller index in the debug message.
Signed-off-by: NHoward Chung <howardchung@google.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

hci_phy_link_complete_evt() has several duplicate error paths -- consolidate
them, using the *goto* statements.
Signed-off-by: NSergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

According to the spec Ver 5.2, Vol 3, Part C, Sec 5.2.2.8:
Device in security mode 4 level 4 shall enforce:
128-bit equivalent strength for link and encryption keys required
using FIPS approved algorithms (E0 not allowed, SAFER+ not allowed,
and P-192 not allowed; encryption key not shortened)

This patch rejects connection with key size below 16 for FIPS
level services.
Signed-off-by: NArchie Pusaka <apusaka@chromium.org>
Reviewed-by: NAlain Michaud <alainm@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

A different wait queue was used when removing ctrl_wait than when adding
it. This effectively made the remove operation without locking compared
to other operations on the wait queue ctrl_wait was part of. This caused
issues like below where dead000000000100 is LIST_POISON1 and
dead000000000200 is LIST_POISON2.

 list_add corruption. next->prev should be prev (ffffffc1b0a33a08), \
	but was dead000000000200. (next=ffffffc03ac77de0).
 ------------[ cut here ]------------
 CPU: 3 PID: 2138 Comm: bluetoothd Tainted: G           O    4.4.238+ #9
 ...
 ---[ end trace 0adc2158f0646eac ]---
 Call trace:
 [<ffffffc000443f78>] __list_add+0x38/0xb0
 [<ffffffc0000f0d04>] add_wait_queue+0x4c/0x68
 [<ffffffc00020eecc>] __pollwait+0xec/0x100
 [<ffffffc000d1556c>] bt_sock_poll+0x74/0x200
 [<ffffffc000bdb8a8>] sock_poll+0x110/0x128
 [<ffffffc000210378>] do_sys_poll+0x220/0x480
 [<ffffffc0002106f0>] SyS_poll+0x80/0x138
 [<ffffffc00008510c>] __sys_trace_return+0x0/0x4

 Unable to handle kernel paging request at virtual address dead000000000100
 ...
 CPU: 4 PID: 5387 Comm: kworker/u15:3 Tainted: G        W  O    4.4.238+ #9
 ...
 Call trace:
  [<ffffffc0000f079c>] __wake_up_common+0x7c/0xa8
  [<ffffffc0000f0818>] __wake_up+0x50/0x70
  [<ffffffc000be11b0>] sock_def_wakeup+0x58/0x60
  [<ffffffc000de5e10>] l2cap_sock_teardown_cb+0x200/0x224
  [<ffffffc000d3f2ac>] l2cap_chan_del+0xa4/0x298
  [<ffffffc000d45ea0>] l2cap_conn_del+0x118/0x198
  [<ffffffc000d45f8c>] l2cap_disconn_cfm+0x6c/0x78
  [<ffffffc000d29934>] hci_event_packet+0x564/0x2e30
  [<ffffffc000d19b0c>] hci_rx_work+0x10c/0x360
  [<ffffffc0000c2218>] process_one_work+0x268/0x460
  [<ffffffc0000c2678>] worker_thread+0x268/0x480
  [<ffffffc0000c94e0>] kthread+0x118/0x128
  [<ffffffc000085070>] ret_from_fork+0x10/0x20
  ---[ end trace 0adc2158f0646ead ]---
Signed-off-by: NOle Bjørn Midtbø <omidtbo@cisco.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Avoid multiple attempts to create the debugfs entry, force_bredr_smp,
by moving it from the SMP registration to the BR/EDR controller init
section. hci_debugfs_create_bredr is only called when HCI_SETUP and
HCI_CONFIG is not set.
Signed-off-by: NClaire Chang <tientzu@chromium.org>
Reviewed-by: NAlain Michaud <alainm@chromium.org>
Reviewed-by: NLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

When adding device to white list the device is added to resolving list
also. It has to be added only when HCI_ENABLE_LL_PRIVACY flag is set.
HCI_ENABLE_LL_PRIVACY flag has to be tested before adding/deleting devices
to resolving list. use_ll_privacy macro is used only to check if controller
supports LL_Privacy.

https://bugzilla.kernel.org/show_bug.cgi?id=209745

Fixes: 0eee35bd ("Bluetooth: Update resolving list when updating whitelist")
Signed-off-by: NSathish Narasimman <sathish.narasimman@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

When an LE connection request is made, advertising is disabled and never
resumed. When a client has an active advertisement, this is disruptive.
This change adds resume logic for client-configured (non-directed)
advertisements after the connection attempt.

The patch was tested by registering an advertisement, initiating an LE
connection from a remote peer, and verifying that the advertisement is
re-activated after the connection is established. This is performed on
Hatch and Kukui Chromebooks.
Signed-off-by: NDaniel Winkler <danielwinkler@google.com>
Reviewed-by: NAbhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

`num_reports` is not being properly checked. A malformed event packet with
a large `num_reports` number makes hci_le_direct_adv_report_evt() read out
of bounds. Fix it.

Cc: stable@vger.kernel.org
Fixes: 2f010b55 ("Bluetooth: Add support for handling LE Direct Advertising Report events")
Reported-and-tested-by: syzbot+24ebd650e20bd263ca01@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=24ebd650e20bd263ca01Signed-off-by: NPeilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

AMP_MGR is getting derefernced in hci_phy_link_complete_evt(), when called
from hci_event_packet() and there is a possibility, that hcon->amp_mgr may
not be found when accessing after initialization of hcon.

- net/bluetooth/hci_event.c:4945
The bug seems to get triggered in this line:

bredr_hcon = hcon->amp_mgr->l2cap_conn->hcon;

Fix it by adding a NULL check for the hcon->amp_mgr before checking the ev-status.

Fixes: d5e91192 ("Bluetooth: AMP: Process Physical Link Complete evt")
Reported-and-tested-by: syzbot+0bef568258653cff272f@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=0bef568258653cff272fSigned-off-by: NAnmol Karn <anmol.karan123@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

withing should be within.
Signed-off-by: NWang Qing <wangqing@vivo.com>
Link: https://lore.kernel.org/r/1604650310-30432-1-git-send-email-wangqing@vivo.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: NRomain Perier <romain.perier@gmail.com>
Signed-off-by: NAllen Pais <apais@linux.microsoft.com>
Acked-by: NSteffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: NRomain Perier <romain.perier@gmail.com>
Signed-off-by: NAllen Pais <apais@linux.microsoft.com>
Acked-by: NKarsten Graul <kgraul@linux.ibm.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: NRomain Perier <romain.perier@gmail.com>
Signed-off-by: NAllen Pais <apais@linux.microsoft.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Acked-by: NStefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: NRomain Perier <romain.perier@gmail.com>
Signed-off-by: NAllen Pais <apais@linux.microsoft.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Reviewed-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NRomain Perier <romain.perier@gmail.com>
Signed-off-by: NAllen Pais <apais@linux.microsoft.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: NRomain Perier <romain.perier@gmail.com>
Signed-off-by: NAllen Pais <apais@linux.microsoft.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: NRomain Perier <romain.perier@gmail.com>
Signed-off-by: NAllen Pais <apais@linux.microsoft.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Remove in-kernel route notifications when the configuration of their
nexthop changes.

These notifications are unnecessary because the route still uses the
same nexthop ID. A separate notification for the nexthop change itself
is now sent in the nexthop notification chain.
Signed-off-by: NIdo Schimmel <idosch@nvidia.com>
Reviewed-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

When registering a new notifier to the nexthop notification chain,
replay all the existing nexthops to the new notifier so that it will
have a complete picture of the available nexthops.
Signed-off-by: NIdo Schimmel <idosch@nvidia.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

This will be used by the next patch which extends the function to replay
all the existing nexthops to the notifier block being registered.

Device drivers will be able to pass extack to the function since it is
passed to them upon reload from devlink.
Signed-off-by: NIdo Schimmel <idosch@nvidia.com>
Reviewed-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

When a single nexthop is deleted, the configuration of all the groups
using the nexthop is effectively modified. In this case, emit a
notification in the nexthop notification chain for each modified group
so that listeners would not need to keep track of which nexthops are
member in which groups.

In the rare cases where the notification fails, emit an error to the
kernel log. This is done by allocating extack on the stack and printing
the error logged by the listener that rejected the notification.

Changes since RFC:
* Allocate extack on the stack
Signed-off-by: NIdo Schimmel <idosch@nvidia.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

When a single nexthop is replaced, the configuration of all the groups
using the nexthop is effectively modified. In this case, emit a
notification in the nexthop notification chain for each modified group
so that listeners would not need to keep track of which nexthops are
member in which groups.

The notification can only be emitted after the new configuration (i.e.,
'struct nh_info') is pointed at by the old shell (i.e., 'struct
nexthop'). Before that the configuration of the nexthop groups is still
the same as before the replacement.
Signed-off-by: NIdo Schimmel <idosch@nvidia.com>
Reviewed-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

The notification is emitted after all the validation checks were
performed, but before the new configuration (i.e., 'struct nh_info') is
pointed at by the old shell (i.e., 'struct nexthop'). This prevents the
need to perform rollback in case the notification is vetoed.

The next patch will also emit a replace notification for all the nexthop
groups in which the nexthop is used.
Signed-off-by: NIdo Schimmel <idosch@nvidia.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Emit a notification in the nexthop notification chain when an existing
nexthop group is replaced.

The notification is emitted after all the validation checks were
performed, but before the new configuration (i.e., 'struct nh_grp') is
pointed at by the old shell (i.e., 'struct nexthop'). This prevents the
need to perform rollback in case the notification is vetoed.
Signed-off-by: NIdo Schimmel <idosch@nvidia.com>
Reviewed-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Emit a notification in the nexthop notification chain when a new nexthop
is added (not replaced). The nexthop can either be a new group or a
single nexthop.

The notification is sent after the nexthop is inserted into the
red-black tree, as listeners might need to callback into the nexthop
code with the nexthop ID in order to mark the nexthop as offloaded.

A 'REPLACE' notification is emitted instead of 'ADD' as the distinction
between the two is not important for in-kernel listeners. In case the
listener is not familiar with the encoded nexthop ID, it can simply
treat it as a new one. This is also consistent with the route offload
API.

Changes since RFC:
* Reword commit message
Signed-off-by: NIdo Schimmel <idosch@nvidia.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Add a function that can be called by device drivers to set "offload" or
"trap" indication on nexthops following nexthop notifications.

Changes since RFC:
* s/nexthop_hw_flags_set/nexthop_set_hw_flags/
Signed-off-by: NIdo Schimmel <idosch@nvidia.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

The flag indicates to user space that the nexthop is not programmed to
forward packets in hardware, but rather to trap them to the CPU. This is
needed, for example, when the MAC of the nexthop neighbour is not
resolved and packets should reach the CPU to trigger neighbour
resolution.

The flag will be used in subsequent patches by netdevsim to test nexthop
objects programming to device drivers and in the future by mlxsw as
well.

Changes since RFC:
* Reword commit message
Signed-off-by: NIdo Schimmel <idosch@nvidia.com>
Reviewed-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>