Signed-off-by: NJiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: NTao Zhou <tao.zhou1@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NJiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: NTao Zhou <tao.zhou1@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Sienna_cichlid has four sdma instances, but other chips don't.
So we need expand to add multiple trap event irq id in sdma
v5.2.
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

1.Skip decode_ring test in VF, because VCN in SRIOV does not
support direct register read/write.

2.Skip powergating configuration in hw fini because
VCN3.0 SRIOV doesn't support powergating.

V2: delete unneccessary white lines and refine implementation.
Signed-off-by: NJack Zhang <Jack.Zhang1@amd.com>
Reviewed-by: NLeo Liu <leo.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

resolve bug calculating fw start address within binary
Reviewed-by: NGuchun Chen <guchun.chen@amd.com>
Signed-off-by: NJohn Clements <john.clements@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

1.In early_init and for sriov, hardcode
  harvest_config=0, enc_num=1

2.sw_init/fini
  alloc & free mm_table for sriov
  doorbell setting for sriov

3.hw_init/fini
  Under sriov, add start_sriov to config mmsch
  Skip ring_test to avoid mmio in VF, but need to initialize wptr for vcn rings.

4.Implementation for vcn_v3_0_start_sriov

V2:Clean-up some uneccessary funciton declaration.
Signed-off-by: NJack Zhang <Jack.Zhang1@amd.com>
Reviewed-by: NLeo Liu <leo.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For VCN3.0 SRIOV, Guest driver needs to communicate with mmsch
to set the World Switch for MM appropriately. This patch add
the interface for mmsch_v3.0.
Signed-off-by: NJack Zhang <Jack.Zhang1@amd.com>
Reviewed-by: NDennis Li <Dennis.Li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For gfx10 boards, except for nv12, other boards take mmio write
rather than rlcg write
Signed-off-by: NJack Zhang <Jack.Zhang1@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For SIENNA_CICHLID SRIOV, jpeg and pgcp is not supported.
Signed-off-by: NJack Zhang <Jack.Zhang1@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Leftover of previous cleanups.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Put the common code in smu_v11_0.c instead of having one copy each.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This can help to maintain clear code layer.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

As it's needed in the succeeding thermal irq setting.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

These are needed for temp1/2/3 related hwmon interfaces.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

These are needed for temp1/2/3 related hwmon interfaces.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The LCLK dpm table setup should be performed in .update_pcie_parameters().
Otherwise, the updated GenSpeed and LaneCount information will be lost.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This can also help to maintain clear code layer.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Leftover of previous performance level setting cleanups.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

By moving the implemention to renoir_ppt.c considering
it's really ASIC specific.

V2: fix compile warnings below
drivers/gpu/drm/amd/amdgpu/../powerplay/renoir_ppt.h:40:25: warning: array subscript is above array bounds [-Warray-bounds]
    freq = table->FClocks[dpm_level].Freq; \
drivers/gpu/drm/amd/amdgpu/../powerplay/renoir_ppt.c:195:2: note: in expansion of macro ‘GET_DPM_CUR_FREQ’
  GET_DPM_CUR_FREQ(clk_table, clk_type, dpm_level, *freq);
  ^~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../powerplay/renoir_ppt.h:46:25: warning: array subscript is above array bounds [-Warray-bounds]
    freq = table->FClocks[dpm_level].Freq;  \
drivers/gpu/drm/amd/amdgpu/../powerplay/renoir_ppt.c:195:2: note: in expansion of macro ‘GET_DPM_CUR_FREQ’
  GET_DPM_CUR_FREQ(clk_table, clk_type, dpm_level, *freq);
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

By calling the target APIs directly.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Before and after setting gfx clock soft max/min frequency.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Use the common smu_v11_0_set_soft_freq_limited_range.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

As a common performance level setting API is used. Then these
ASIC specific APIs are not needed any more.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

As a common performance level setting API is used. Then these
ASIC specific APIs are not needed any more.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

As a common performance level setting API is used. Then these
ASIC specific APIs are not needed any more.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

So that it can be more widely shared around SMU v11 ASICs.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Preparing for coming code sharing around performance level
setting.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This is used to cache the clock frequencies for all UMD pstates.
So that we do not need to calculate from scratch on every UMD
pstate switch.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Cache all clocks levels for every dpm table. They are needed
by other APIs.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Cache all clocks levels for every dpm table. They are needed
by other APIs.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Preparing for coming code sharing around performance level
setting.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Maximum the code sharing around smu V11.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

These members can help to cache the clock frequencies for all
dpm levels. Then simplifying the code for dpm level switching
is possible.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Default value is auto, doesn't change
original reset method logic.

v2: change to use parameter reset_method
v3: add warn msg if specified mode isn't supported
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Signed-off-by: NWenhui Sheng <Wenhui.Sheng@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For sienna cichlid, add mode1 reset path for sGPU.

v2: hiding MP0/MP1 mode1 reset under AMD_RESET_METHOD_MODE1
v3: split emergency restart logic to a new patch
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Signed-off-by: NWenhui Sheng <Wenhui.Sheng@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

If we are in RAS triggered situation and
BACO isn't support, emergency restart is needed,
and this code is only needed for some specific
cases(vega20 with given smu fw version).

After we add smu mode1 reset for sienna cichlid, we
need to share AMD_RESET_METHOD_MODE1 with psp mode1 reset,
so in amdgpu_device_gpu_recover, we need differentiate
which mode1 reset we are using, then decide if it's
a full reset and then decide if emergency restart is needed,
the logic will become much more complex.

After discussion with Hawking, move emergency restart logic
to an independent function.
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Signed-off-by: NWenhui Sheng <Wenhui.Sheng@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

From PM FW 58.26.0 for sienna cichlid, SMU mode1 reset
is support, driver sends PPSMC_MSG_Mode1Reset message
to PM FW could trigger this reset.

v2: add mode1 reset dpm interface
v3: change maro name
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Signed-off-by: NWenhui Sheng <Wenhui.Sheng@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

 - fix some styling issues
 - fixes for kernel-doc type
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NRajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The "stream" pointer can't be NULL and it's dereferenced on the line
before so the check doesn't make sense.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

"u64 *wptr" points to the the wptr value in write back buffer and
"*wptr = (*wptr) >> 2;" results in the value being overwritten each time
when ->get_wptr() is called.

umr uses /sys/kernel/debug/dri/0/amdgpu_ring_sdma0 to get rptr/wptr and
decode ring content and it is affected by this issue.

fix and simplify the logic similar as sdma_v4_0_ring_get_wptr().

v2: fix for sdma5.2 as well
Suggested-by: NLe Ma <le.ma@amd.com>
Signed-off-by: NXiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>