So that it will show up as /dev/ttyS0.  Otherwise things like
installers will try to run on whatever serial port gets probed
first.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

By calling uart_handle_break().  We'll still do the
"sun_do_break()" handling if the user gives two
breaks in a row.

We should probably do this in the other Sparc serial
drivers too.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Until the uart is openned, port->info is NULL.

Also, init the port->irq properly and give a non-zero
port->membase so that the uart device reporting is done.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Need to translate through the interrupt-map{,-mask] properties.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add udelay to polling console write loop, and increment
the loop limit.

Name the device "ttyHV" and pass that to add_preferred_console()
when we're using hypervisor console.

Kill sunhv_console_setup(), it's empty.

Handle the case where we don't want to use hypervisor console.
(ie. we have a head attached to a sun4v machine)
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If the console is not for a particular Sun serial
controller, set the drv->cons to NULL.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since it can do things like BREAK and HUP, we implement
this as a serial uart driver.

This still needs interrupt probing code, as I haven't figured
out how interrupts will work or be probed for on SUN4V yet.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Get rid of the local 'flip' variable and no need to 'trim' the buffer.
Signed-off-by: NPatrick Gefre <pfg@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We're presently getting oopses because Bluetooth (and possibly other) drivers
are calling core functions after things have been shut down.

So rather than oopsing, let's drop a warning then take avoiding action, so the
machine survives.  Once all the sub-drivers are fixed up we can remove the
take-avoiding-action part.
Signed-off-by: NPavel Machek <pavel@suse.cz>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This stuff is all in the generic ia64 kernel, and the new initcall error
reporting complains about them.
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Incorrect uart_write_wakeup() calls cause reference to a NULL tty
pointer.  This has been fixed in the sunsab and sunzilog serial drivers
in October 2005.  Update the ip22zilog, which is based on sunzilog,
accordingly.
Signed-off-by: NMartin Michlmayr <tbm@cyrius.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk

The caller takes the UART port lock, so we shouldn't try
to take it again.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

early_serial_setup() must not be called after console initialisation.
Add a comment prior to the function explicitly stating this.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

In kernel bugzilla #5176 (http://bugzilla.kernel.org/show_bug.cgi?id=5176)
Harry R\374ter <h.rueter@gmx.de> points out Documentation/jsm.txt is missing.

No one at Digi seems to care, so just remove the stale reference.
Signed-off-by: NArthur Othieno <apgo@patchbomb.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Serial drivers in general should not write uart_info->flags - they're
private to serial_core.  Serial drivers have no need to fiddle with
tty->alt_speed, nor manipulate TTY_IO_ERROR in tty->flags.  Fix the
ioc4 serial driver for both these points by simply removing the
offending code.

Acked-by: pfg@sgi.com
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch adds new PCI serial card support.
Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This replaces old direct usage of tty->flip stuff with relative flip API
calls.
Signed-off-by: NVitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The DB1550 actually doesn't have a UART2.  Remove it from the list.
Signed-off-by: NJordan Crouse <jordan.crouse@amd.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

On some embedded PowerPC (MPC834x) systems an extra byte would some
times be required to flush data out of the fifo.
serial8250_console_write() was updating the IER in hardware without
also updating the copy in uart_8250_port. This causes issues functions
like serial8250_start_tx() and __stop_tx() to misbehave.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Lucas Correia Villa Real

This patch defines the number of serial ports on the S3C2400.
Signed-off-by: NLucas Correia Villa Real <lucasvr@gobolinux.org>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Use the new tty_schedule_flip() instead of the original direct
schedule_work of the flip buffer.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Use the new tty_schedule_flip() instead of the original direct
schedule_work of the flip buffer.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Re-organize the default CONSOLE baud rate define setting so that
it is only set once.

Use the new tty_schedule_flip() instead of the original direct
schedule_work of the flip buffer.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Convert usage of ASYNC_* to UPF_*.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Convert usage of SERIAL_IO_* to UPIO_*.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Prevent SERIAL_8250_RUNTIME_UARTS being larger than SERIAL_8250_NR_UARTS.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

- jsm_driver.c: remove the now unused jsm_rawreadok module_param
- jsm_tty.c: remove a now unused variable

Is there any problem with removing the now useless jsm_rawreadok
module_param?
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Cc: V. Ananda Krishnan <mansarov@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NV. Ananda Krishnan <mansarov@us.ibm.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Breakage reported by Adrian Bunk

Untested (no hardware)
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

It seems serial_core intend to initialize port->lock just once for each
ports.  This is done in uart_set_options() for console, and in
uart_add_one_port() for other ports.  But there is a case the port->lock is
not initialized by serial_core.  If the setup function for the console was
failed, it will not call uart_set_options() but the port is marked as
console (uart_console(port) returns 1).  It can happen if console was PCI
port which can not detected at the time of register_console.

This patch is to initialize port->lock for such console port.  With this
change, most of spin_lock_init() (some of them are labeled "Temporary
fix.") in low-level serial drivers can be omitted.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch adds support for SIIG 8-port boards. These boards have 4 ports in
separate bars and another 4 ports in the single bar. Because of this strange
port arrangement these cards need special setup function. Fortunately no other
SIIG cards have more than 4 port, so this setup function could be used for them
too.
Signed-off-by: NAndrey Panin <pazke@donpac.ru>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

A couple of updates for the sh-sci serial driver:

	- Update for clock framework on sh.
	- Fix a compile error introduced by some h8300 changes.
	- Add SH7770/SH7780 subtype support.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

      Scott Kilau <Scott_Kilau@digi.com>

Digi serial port console doesn't work when baud rates are set higher than
38400.  So the lookup table and code in jsm_neo.c has been modified and
tested.  Please let me have the feed-back.
Signed-off-by: NV.Ananda Krishnan <mansarov@us.ibm.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Patch from Lucas Correia Villa Real

This patch defines S3C2400 memory map and adds a S3C24XX macro for
common resources between S3C2400, S3C2410 and S3C2440 cpus.
Signed-off-by: NLucas Correia Villa Real <lucasvr@gobolinux.org>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This fixes the documentation error for 'SERIAL_8250' in
drivers/serial/Kconfig
Signed-off-by: NTimothy Charles McGrath <tmHikaru@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Same reasoning as commit 747c8a55
but this time we're making uart_port flags a bitwise type - not
all of these flags correspond with the old ASYNC_ flags, so there
is the possibility for bugs if the wrong ASYNC_* constants are
used.  Always use UPF_* constants for uart_port->flags.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>