Delete redundant timing data tables. Replace as follows:

	EnlargeTap4Timing	==> xgifb_tap4_timing
	NoScaleTap4Timing	==> xgifb_tap4_timing
	NTSCTap4Timing		==> xgifb_ntsc_525_tap4_timing
	YPbPr525iTap4Timing	==> xgifb_ntsc_525_tap4_timing
	YPbPr525pTap4Timing	==> xgifb_ntsc_525_tap4_timing
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Delete redundant TV data tables. Replace as follows:

	XGI_EPLCHTVDataPtr	==> xgifb_chrontel_tv
	XGI_EPLCHTVRegPtr	==> xgifb_chrontel_tv
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

XGI_EPLLCDCRT1Ptr_H and XGI_EPLLCDCRT1Ptr_V tables are identical. Replace
as follows:

	XGI_EPLLCDCRT1Ptr_H	==> xgifb_epllcd_crt1
	XGI_EPLLCDCRT1Ptr_V	==> xgifb_epllcd_crt1
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Delete duplicated LCD data tables. Replace as follows:

	XGI_ExtLCD1400x1050Data		==> xgifb_lcd_1400x1050
	XGI_StLCD1400x1050Data		==> xgifb_lcd_1400x1050
	XGI_ExtLCD1280x1024x75Data	==> xgifb_lcd_1280x1024x75
	XGI_StLCD1280x1024x75Data	==> xgifb_lcd_1280x1024x75
	XGI_ExtLCDDes1400x1050Data	==> xgifb_lcddes_1400x1050
	XGI_StLCDDes1400x1050Data	==> xgifb_lcddes_1400x1050
	XGI_ExtLCDDLDes1400x1050Data	==> xgifb_lcddldes_1400x1050
	XGI_StLCDDLDes1400x1050Data	==> xgifb_lcddldes_1400x1050
	XGI_ExtLCDDes1024x768x75Data	==> xgifb_lcddes_1024x768x75
	XGI_StLCDDes1024x768x75Data	==> xgifb_lcddes_1024x768x75
	XGI_ExtLCDDes1280x1024x75Data	==> xgifb_lcddes_1280x1024x75
	XGI_StLCDDes1280x1024x75Data	==> xgifb_lcddes_1280x1024x75
	XGI_ExtLCDDLDes1280x1024x75Data ==> xgifb_lcddldes_1280x1024x75
	XGI_StLCDDLDes1280x1024x75Data	==> xgifb_lcddldes_1280x1024x75
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

PAL-M and PAL-N "YFilter1" tables are identical. Replace as follows:

	PALMYFilter1	==> xgifb_palmn_yfilter1
	PALNYFilter1	==> xgifb_palmn_yfilter1
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

All four "YFilter2" tables are identical. Replace as follows:

	NTSCYFilter2	==> xgifb_yfilter2;
	PALMYFilter2	==> xgifb_yfilter2;
	PALNYFilter2	==> xgifb_yfilter2;
	PALYFilter2	==> xgifb_yfilter2;
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove redundant initializations.
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Eliminate #define Tap4 and related checks.
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Delete routines which have been commented out.
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The code is almost the same for XG21 and XG27, a single routine can
cover both.
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The code is almost the same for XG21 and XG27, a single routine can
cover both.
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Delete redundant Chrontel TV data.
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

IF_DEF_CH7007 is hard-coded to 0, so this is all just dead code that
can be deleted.
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

IF_DEF_CH7005 is hard-coded to 0, so this is all just dead code that
can be deleted.
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

IF_DEF_CH7017 is hard-coded to 0, so this is all just dead code that
can be deleted.
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Delete redundant function. Also eliminates the following sparse warning:

drivers/staging/xgifb/vb_setmode.c:8033:6: warning: symbol 'XGI_OpenCRTC' was not declared. Should it be static?
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Use a common init function for module and built-in driver.
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove incorrect/misleading text from parameter descriptions.
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Delete all references to mode "none". It should be handled like any
other invalid mode.
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

According to the comment, the default mode should be 800x600x8 while
the index points actually to 800x600x16. Change the comment and move
the definition instead of changing the current behaviour.
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The default mode is the same regardless of the display type, except for
XG21/LCD which is determined dynamically.
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fail the probe if the LCD resolution described in card firmware does
not match any of the supported modes.
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The code for determining the default video mode is unnecessarily
duplicated in XGIfb_search_mode() and XGIfb_search_vesamode() functions.
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The same default video mode should be assumed regardless if the driver
is a module or not. This won't change the current behaviour, but it will
simplify further changes.
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

XGIfb_search_mode() is always called with a valid string pointer.
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

When searching the video mode, some HW details needs to be
known. Therefore it's not possible to do that reliably before probe().
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

If the driver fails to get LVDS LCD data from the firmware, it falls
back to using driver's hardcoded values. However, this is done too
early in the probe. The selected video mode index is not yet known,
and also in some cases it could be defaulting to -1 resulting in a read
outside the array. Fix this by moving the array lookup after the video
mode validation.
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Reported-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Check option values with kstrtoul(). This will also eliminate some
checkpatch warnings about simple_strtoul() usage.
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The global data is already initialized to zero.
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Print options only if they are given. Delete other messages.
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

It's possible to disable the built-in xgifb driver with the kernel
command line option:

	video=xgifb:off

This is already handled by the generic framebuffer layer (fb_get_options()
will return TRUE resulting in init failure), so no need to process the
option in the driver.
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Delete redundant branches for "mode" and "vesa" options.
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Setting any of the FB options will disable ypan as a side effect. It
should be disabled only by the "noypan" option.
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Delete parameters which have no effect.
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The serqt_usb2 driver will not work properly with the ssu100 device
even though it claims to support it.  The ssu100 is supported by the
ssu100 driver in mainline so there is no need to have it claimed by
serqt_usb2.
Signed-off-by: NBill Pemberton <wfp5p@virginia.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

In case if condition (kd != isdongle(peasycap)) becomes true,
easycap_poll() returns without releasing easycapdc60_dongle[kd].mutex_video.
The patch adds mutex_unlock() before that return.

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: NAlexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Adding some basic ethtool ops and supporting functionality using a phy device.
Signed-off-by: NMark Einon <mark.einon@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Manual setting of speed/duplex will be achieved using ethtool.
Remove the driver specific module_param that also does this.
Signed-off-by: NMark Einon <mark.einon@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

A mechanism used to set the phy in loopback mode is not present in the driver, making associated checks and variables redundant. Removing them.
Signed-off-by: NMark Einon <mark.einon@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

xcvr_id holds the phy ID which is stored but never used in the driver.
Signed-off-by: NMark Einon <mark.einon@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>