- 24 6月, 2005 40 次提交
-
-
由 Jan Beulich 提交于
Fix (in the architectures I'm actually building for) the UP definition of per_cpu so that the cpu specified may be any expression, not just an identifier or a suffix expression. Signed-off-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jan Beulich 提交于
Fix a build problem when IDEFLOPPY_DEBUG_BUGS is turned off, and eliminate an access to memory that is no longer allocated (causing systems to fail booting when CONFIG_DEBUG_PAGEALLOC is turned on). Signed-off-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Yoav Zach 提交于
In ia64 kernel, the O_LARGEFILE flag is forced when opening a file. This is problematic for execution of 32 bit processes, which are not largefile aware, either by SW emulation or by HW execution. For such processes, the problem is two-fold: 1) When trying to open a file that is larger than 4G the operation should fail, but it's not 2) Writing to offset larger than 4G should fail, but it's not The proposed patch takes advantage of the way 32 bit processes are identified in ia64 systems. Such processes have PER_LINUX32 for their personality. With the patch, the ia64 kernel will not enforce the O_LARGEFILE flag if the current process has PER_LINUX32 set. The behavior for all other architectures remains unchanged. Signed-off-by: NYoav Zach <yoav.zach@intel.com> Acked-by: NTony Luck <tony.luck@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Martin Schitter 提交于
kernel 2.6.12-rc2 adopted some code by Bjorn Helgaas supporting NetMos combo controller cards. this implementation doesn't work for nm9855 based cards! there are two reasons: a) the module 'parport_pc' doesn't want to give the resonsibility for the netmos_9855 to 'parport_serial' and can not handle the serial lines -- trivial to fix... http://lists.infradead.org/pipermail/linux-parport/2005-February/000250.html http://lkml.org/lkml/2005/3/24/199 b) the support for the nm9855 in 'parport_serial' still doesn't work because of wrong assumptions about the relevant BARs port address layout for this chip: 0000:00:09.0 Communication controller: NetMos Technology PCI 9855 Multi-I/O Controller (rev 01) (= 9710:9855) Subsystem: LSI Logic / Symbios Logic 1P4S (= 1000:0014) Flags: medium devsel, IRQ 177 I/O ports at a800 [size=8] (= parport) I/O ports at a400 [size=8] I/O ports at a000 [size=8] (= serial) I/O ports at 9800 [size=8] (= serial) I/O ports at 9400 [size=8] (= serial) I/O ports at 9000 [size=16] (= serial) the following patch will fix the problem. Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Pat Gefre 提交于
Small mod to shut off the xmit interrupt if we have nothing to transmit. Signed-off-by: NPatrick Gefre <pfg@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Kirill Korotaev 提交于
This patch removes O(n^2) super block loops in sync_inodes(), sync_filesystems() etc. in favour of using __put_super_and_need_restart() which I introduced earlier. We faced a noticably long freezes on sb syncing when there are thousands of super blocks in the system. Signed-Off-By: NKirill Korotaev <dev@sw.ru> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Kirill Korotaev 提交于
This patch fixes recalc_sigpending() to work correctly with tasks which are being freezed. The problem is that freeze_processes() sets PF_FREEZE and TIF_SIGPENDING flags on tasks, but recalc_sigpending() called from e.g. sys_rt_sigtimedwait or any other kernel place will clear TIF_SIGPENDING due to no pending signals queued and the tasks won't be freezed until it recieves a real signal or freezed_processes() fail due to timeout. Signed-Off-By: NKirill Korotaev <dev@sw.ru> Signed-Off-By: NAlexey Kuznetsov <kuznet@ms2.inr.ac.ru> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Kirill Korotaev 提交于
This patch fixes incorrect and bogus kernel messages that file-max limit reached when the allocation fails Signed-Off-By: NKirill Korotaev <dev@sw.ru> Signed-Off-By: NDenis Lunev <den@sw.ru> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Christoph Hellwig 提交于
In a duplicate of lookup_create in the af_unix code Al commented what's going on nicely, so let's bring that over to lookup_create before the copy is going away (I'll send a patch soon) Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alexey Dobriyan 提交于
"Non-members are not allowed to post messages to this list. Blame the original poster for cross-posting to subscriber-only mailing lists. " Signed-off-by: NAlexey Dobriyan <adobriyan@mail.ru> Acked-by: NRussell King <rmk@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andreas Dilger 提交于
Henrik Grubbstrom noted: The 2.6.10 ext3_get_parent attempts to use ext3_find_entry to look up the entry "..", which fails for dx directories since ".." is not present in the directory hash table. The patch below solves this by looking up the dotdot entry in the dx_root block. Typical symptoms of the above bug are intermittent claims by nfsd that files or directories are missing on exported ext3 filesystems. cf https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=3D150759 and https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=3D144556 ext3_get_parent() is IMHO the wrong place to fix this bug as it introduces a lot of internals from htree into that function. Instead, I think this should be fixed in ext3_find_entry() as in the below patch. This has the added advantage that it works for any callers of ext3_find_entry() and not just ext3_lookup_parent(). Signed-off-by: NAndreas Dilger <adilger@clusterfs.com> Signed-off-by: NHenrik Grubbstrom <grubba@grubba.org> Cc: <ext2-devel@lists.sourceforge.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alan Cox 提交于
Add a new `suid_dumpable' sysctl: This value can be used to query and set the core dump mode for setuid or otherwise protected/tainted binaries. The modes are 0 - (default) - traditional behaviour. Any process which has changed privilege levels or is execute only will not be dumped 1 - (debug) - all processes dump core when possible. The core dump is owned by the current user and no security is applied. This is intended for system debugging situations only. Ptrace is unchecked. 2 - (suidsafe) - any binary which normally would not be dumped is dumped readable by root only. This allows the end user to remove such a dump but not access it directly. For security reasons core dumps in this mode will not overwrite one another or other files. This mode is appropriate when adminstrators are attempting to debug problems in a normal environment. (akpm: > > +EXPORT_SYMBOL(suid_dumpable); > > EXPORT_SYMBOL_GPL? No problem to me. > > if (current->euid == current->uid && current->egid == current->gid) > > current->mm->dumpable = 1; > > Should this be SUID_DUMP_USER? Actually the feedback I had from last time was that the SUID_ defines should go because its clearer to follow the numbers. They can go everywhere (and there are lots of places where dumpable is tested/used as a bool in untouched code) > Maybe this should be renamed to `dump_policy' or something. Doing that > would help us catch any code which isn't using the #defines, too. Fair comment. The patch was designed to be easy to maintain for Red Hat rather than for merging. Changing that field would create a gigantic diff because it is used all over the place. ) Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Prasanna S Panchamukhi 提交于
Presently either multiple kprobes or only one jprobe could be inserted. This patch removes the above limitation and allows one jprobe and multiple kprobes to coexist at the same address. However multiple jprobes cannot coexist with multiple kprobes. Currently I am working on the prototype to allow multiple jprobes coexist with multiple kprobes. Signed-off-by: NAnanth N Mavinakayanhalli <amavin@redhat.com> Signed-off-by: NPrasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Anil S Keshavamurthy 提交于
This patch includes IA64 architecture specific changes(ported form i386) to support temporary disarming on reentrancy of probes. In case of reentrancy we single step without calling user handler. Signed-of-by: NAnil S Keshavamurth <anil.s.keshavamurthy@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Prasanna S Panchamukhi 提交于
This patch includes sparc64 architecture specific changes to support temporary disarming on reentrancy of probes. Signed-of-by: NPrasanna S Panchamukhi <prasanna@in.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Prasanna S Panchamukhi 提交于
This patch includes ppc64 architecture specific changes to support temporary disarming on reentrancy of probes. Signed-of-by: NPrasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Prasanna S Panchamukhi 提交于
This patch includes x86_64 architecture specific changes to support temporary disarming on reentrancy of probes. Signed-of-by: NPrasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Prasanna S Panchamukhi 提交于
This patch includes i386 architecture specific changes to support temporary disarming on reentrancy of probes. Signed-of-by: NPrasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Prasanna S Panchamukhi 提交于
In situations where a kprobes handler calls a routine which has a probe on it, then kprobes_handler() disarms the new probe forever. This patch removes the above limitation by temporarily disarming the new probe. When the another probe hits while handling the old probe, the kprobes_handler() saves previous kprobes state and handles the new probe without calling the new kprobes registered handlers. kprobe_post_handler() restores back the previous kprobes state and the normal execution continues. However on x86_64 architecture, re-rentrancy is provided only through pre_handler(). If a routine having probe is referenced through post_handler(), then the probes on that routine are disarmed forever, since the exception stack is gets changed after the processor single steps the instruction of the new probe. This patch includes generic changes to support temporary disarming on reentrancy of probes. Signed-of-by: NPrasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Keshavamurthy Anil S 提交于
Once the jprobe instrumented function returns, it executes a jprobe_break which is a break instruction with __IA64_JPROBE_BREAK value. The current patch checks for this break value, before assuming that jprobe instrumented function just completed. The previous code was not checking for this value and that was a bug. Signed-off-by: NAnil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Anil S Keshavamurthy 提交于
The current kprobes does not yet handle register kprobes on some of the following kind of instruction which needs to be emulated in a special way. 1) mov r1=ip 2) chk -- Speculation check instruction This patch attempts to fail register_kprobes() when user tries to insert kprobes on the above kind of instruction. Signed-off-by: NAnil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Anil S Keshavamurthy 提交于
The current Kprobes when patching the original instruction with the break instruction tries to retain the original qualifying predicate(qp), however for cmp.crel.ctype where ctype == unc, which is a special instruction always needs to be executed irrespective of qp. Hence, if the instruction we are patching is of this type, then we should not copy the original qp to the break instruction, this is because we always want the break fault to happen so that we can emulate the instruction. This patch is based on the feedback given by David Mosberger Signed-off-by: NAnil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Anil S Keshavamurthy 提交于
arch_prepare_kprobes() was doing lots of functionality in just one single function. This patch attempts to clean up arch_prepare_kprobes() by moving specific sub task to the following (new)functions 1)valid_kprobe_addr() -->> validate the given kprobe address 2)get_kprobe_inst(slot..)->> Retrives the instruction for a given slot from the bundle 3)prepare_break_inst() -->> Prepares break instruction within the bundle 3a)update_kprobe_inst_flag()-->>Updates the internal flags, required for proper emulation of the instruction at later point in time. Signed-off-by: NAnil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Rusty Lynch 提交于
Fix a bug where a kprobe still fires when the instruction is predicated off. So given the p6=0, and we have an instruction like: (p6) move loc1=0 we should not be triggering the kprobe. This is handled by carrying over the qp section of the original instruction into the break instruction. Signed-off-by: NAnil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: NRusty Lynch <Rusty.lynch@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Rusty Lynch 提交于
A cleanup of the ia64 kprobes implementation such that all of the bundle manipulation logic is concentrated in arch_prepare_kprobe(). With the current design for kprobes, the arch specific code only has a chance to return failure inside the arch_prepare_kprobe() function. This patch moves all of the work that was happening in arch_copy_kprobe() and most of the work that was happening in arch_arm_kprobe() into arch_prepare_kprobe(). By doing this we can add further robustness checks in arch_arm_kprobe() and refuse to insert kprobes that will cause problems. Signed-off-by: NRusty Lynch <Rusty.lynch@intel.com> Signed-off-by: NAnil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Anil S Keshavamurthy 提交于
This patch is required to support kprobe on branch/call instructions. Signed-off-by: NAnil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Anil S Keshavamurthy 提交于
This patch adds IA64 architecture specific JProbes support on top of Kprobes Signed-off-by: NAnil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: NRusty Lynch <Rusty.lynch@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Anil S Keshavamurthy 提交于
This is an IA64 arch specific handling of Kprobes Signed-off-by: NAnil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: NRusty Lynch <Rusty.lynch@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Anil S Keshavamurthy 提交于
As many of you know that kprobes exist in the main line kernel for various architecture including i386, x86_64, ppc64 and sparc64. Attached patches following this mail are a port of Kprobes and Jprobes for IA64. I have tesed this patches for kprobes and Jprobes and this seems to work fine. I have tested this patch by inserting kprobes on various slots and various templates including various types of branch instructions. I have also tested this patch using the tool http://marc.theaimsgroup.com/?l=linux-kernel&m=111657358022586&w=2 and the kprobes for IA64 works great. Here is list of TODO things and pathes for the same will appear soon. 1) Support kprobes on "mov r1=ip" type of instruction 2) Support Kprobes and Jprobes to exist on the same address 3) Support Return probes 3) Architecture independent cleanup of kprobes This patch adds the kdebug die notification mechanism needed by Kprobes. For break instruction on Branch type slot, imm21 is ignored and value zero is placed in IIM register, hence we need to handle kprobes for switch case zero. Signed-off-by: NAnil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: NRusty Lynch <Rusty.lynch@intel.com> From: Rusty Lynch <rusty.lynch@intel.com> At the point in traps.c where we recieve a break with a zero value, we can not say if the break was a result of a kprobe or some other debug facility. This simple patch changes the informational string to a more correct "break 0" value, and applies to the 2.6.12-rc2-mm2 tree with all the kprobes patches that were just recently included for the next mm cut. Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Hien Nguyen 提交于
This patch moves the lock/unlock of the arch specific kprobe_flush_task() to the non-arch specific kprobe_flusk_task(). Signed-off-by: NHien Nguyen <hien@us.ibm.com> Acked-by: NPrasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Rusty Lynch 提交于
The architecture independent code of the current kprobes implementation is arming and disarming kprobes at registration time. The problem is that the code is assuming that arming and disarming is a just done by a simple write of some magic value to an address. This is problematic for ia64 where our instructions look more like structures, and we can not insert break points by just doing something like: *p->addr = BREAKPOINT_INSTRUCTION; The following patch to 2.6.12-rc4-mm2 adds two new architecture dependent functions: * void arch_arm_kprobe(struct kprobe *p) * void arch_disarm_kprobe(struct kprobe *p) and then adds the new functions for each of the architectures that already implement kprobes (spar64/ppc64/i386/x86_64). I thought arch_[dis]arm_kprobe was the most descriptive of what was really happening, but each of the architectures already had a disarm_kprobe() function that was really a "disarm and do some other clean-up items as needed when you stumble across a recursive kprobe." So... I took the liberty of changing the code that was calling disarm_kprobe() to call arch_disarm_kprobe(), and then do the cleanup in the block of code dealing with the recursive kprobe case. So far this patch as been tested on i386, x86_64, and ppc64, but still needs to be tested in sparc64. Signed-off-by: NRusty Lynch <rusty.lynch@intel.com> Signed-off-by: NAnil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Rusty Lynch 提交于
The following patch adds the x86_64 architecture specific implementation for function return probes. Function return probes is a mechanism built on top of kprobes that allows a caller to register a handler to be called when a given function exits. For example, to instrument the return path of sys_mkdir: static int sys_mkdir_exit(struct kretprobe_instance *i, struct pt_regs *regs) { printk("sys_mkdir exited\n"); return 0; } static struct kretprobe return_probe = { .handler = sys_mkdir_exit, }; <inside setup function> return_probe.kp.addr = (kprobe_opcode_t *) kallsyms_lookup_name("sys_mkdir"); if (register_kretprobe(&return_probe)) { printk(KERN_DEBUG "Unable to register return probe!\n"); /* do error path */ } <inside cleanup function> unregister_kretprobe(&return_probe); The way this works is that: * At system initialization time, kernel/kprobes.c installs a kprobe on a function called kretprobe_trampoline() that is implemented in the arch/x86_64/kernel/kprobes.c (More on this later) * When a return probe is registered using register_kretprobe(), kernel/kprobes.c will install a kprobe on the first instruction of the targeted function with the pre handler set to arch_prepare_kretprobe() which is implemented in arch/x86_64/kernel/kprobes.c. * arch_prepare_kretprobe() will prepare a kretprobe instance that stores: - nodes for hanging this instance in an empty or free list - a pointer to the return probe - the original return address - a pointer to the stack address With all this stowed away, arch_prepare_kretprobe() then sets the return address for the targeted function to a special trampoline function called kretprobe_trampoline() implemented in arch/x86_64/kernel/kprobes.c * The kprobe completes as normal, with control passing back to the target function that executes as normal, and eventually returns to our trampoline function. * Since a kprobe was installed on kretprobe_trampoline() during system initialization, control passes back to kprobes via the architecture specific function trampoline_probe_handler() which will lookup the instance in an hlist maintained by kernel/kprobes.c, and then call the handler function. * When trampoline_probe_handler() is done, the kprobes infrastructure single steps the original instruction (in this case just a top), and then calls trampoline_post_handler(). trampoline_post_handler() then looks up the instance again, puts the instance back on the free list, and then makes a long jump back to the original return instruction. So to recap, to instrument the exit path of a function this implementation will cause four interruptions: - A breakpoint at the very beginning of the function allowing us to switch out the return address - A single step interruption to execute the original instruction that we replaced with the break instruction (normal kprobe flow) - A breakpoint in the trampoline function where our instrumented function returned to - A single step interruption to execute the original instruction that we replaced with the break instruction (normal kprobe flow) Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Hien Nguyen 提交于
This patch adds function-return probes to kprobes for the i386 architecture. This enables you to establish a handler to be run when a function returns. 1. API Two new functions are added to kprobes: int register_kretprobe(struct kretprobe *rp); void unregister_kretprobe(struct kretprobe *rp); 2. Registration and unregistration 2.1 Register To register a function-return probe, the user populates the following fields in a kretprobe object and calls register_kretprobe() with the kretprobe address as an argument: kp.addr - the function's address handler - this function is run after the ret instruction executes, but before control returns to the return address in the caller. maxactive - The maximum number of instances of the probed function that can be active concurrently. For example, if the function is non- recursive and is called with a spinlock or mutex held, maxactive = 1 should be enough. If the function is non-recursive and can never relinquish the CPU (e.g., via a semaphore or preemption), NR_CPUS should be enough. maxactive is used to determine how many kretprobe_instance objects to allocate for this particular probed function. If maxactive <= 0, it is set to a default value (if CONFIG_PREEMPT maxactive=max(10, 2 * NR_CPUS) else maxactive=NR_CPUS) For example: struct kretprobe rp; rp.kp.addr = /* entrypoint address */ rp.handler = /*return probe handler */ rp.maxactive = /* e.g., 1 or NR_CPUS or 0, see the above explanation */ register_kretprobe(&rp); The following field may also be of interest: nmissed - Initialized to zero when the function-return probe is registered, and incremented every time the probed function is entered but there is no kretprobe_instance object available for establishing the function-return probe (i.e., because maxactive was set too low). 2.2 Unregister To unregiter a function-return probe, the user calls unregister_kretprobe() with the same kretprobe object as registered previously. If a probed function is running when the return probe is unregistered, the function will return as expected, but the handler won't be run. 3. Limitations 3.1 This patch supports only the i386 architecture, but patches for x86_64 and ppc64 are anticipated soon. 3.2 Return probes operates by replacing the return address in the stack (or in a known register, such as the lr register for ppc). This may cause __builtin_return_address(0), when invoked from the return-probed function, to return the address of the return-probes trampoline. 3.3 This implementation uses the "Multiprobes at an address" feature in 2.6.12-rc3-mm3. 3.4 Due to a limitation in multi-probes, you cannot currently establish a return probe and a jprobe on the same function. A patch to remove this limitation is being tested. This feature is required by SystemTap (http://sourceware.org/systemtap), and reflects ideas contributed by several SystemTap developers, including Will Cohen and Ananth Mavinakayanahalli. Signed-off-by: NHien Nguyen <hien@us.ibm.com> Signed-off-by: NPrasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: NFrederik Deweerdt <frederik.deweerdt@laposte.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Christoph Hellwig 提交于
Use lookup_one_len instead of opencoding a simplified lookup using lookup_hash with a fake hash. Also there's no need anymore for the d_invalidate as we have a completely valid dentry now. Signed-off-by: NChristoph Hellwig <hch@lst.de> Acked-by: NJan Kara <jack@suse.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Christoph Hellwig 提交于
Move some code duplicated in both callers into vfs_quota_on_mount Signed-off-by: NChristoph Hellwig <hch@lst.de> Acked-by: NJan Kara <jack@ucw.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alexander Nyberg 提交于
Prevent recursive faults in do_exit() by leaving the task alone and wait for reboot. This may allow a more graceful shutdown and possibly save the original oops. Signed-off-by: NAlexander Nyberg <alexn@telia.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Christoph Hellwig 提交于
Various filesystem drivers have grown a get_dentry() function that's a duplicate of lookup_one_len, except that it doesn't take a maximum length argument and doesn't check for \0 or / in the passed in filename. Switch all these places to use lookup_one_len. Signed-off-by: NChristoph Hellwig <hch@lst.de> Cc: Greg KH <greg@kroah.com> Cc: Paul Jackson <pj@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Neil Horman 提交于
Patch to add check to get_chrdev_list and get_blkdev_list to prevent reads of /proc/devices from spilling over the provided page if more than 4096 bytes of string data are generated from all the registered character and block devices in a system Signed-off-by: NNeil Horman <nhorman@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Pekka Enberg 提交于
This patch removes redundant VM_ClearReadHint from mm/madvice.c which was left there by Prasanna's patch. Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jesper Juhl 提交于
In kernel/sched.c the return value from preempt_count() is cast to an int. That made sense when preempt_count was defined as different types on is not needed and should go away. The patch removes the cast. In kernel/timer.c the return value from preempt_count() is assigned to a variable of type u32 and then that unsigned value is later compared to preempt_count(). Since preempt_count() returns an int, an int is what should be used to store its return value. Storing the result in an unsigned 32bit integer made a tiny bit of sense back when preempt_count was different types on different archs, but no more - let's not play signed vs unsigned comparison games when we don't have to. The patch modifies the code to use an int to hold the value. While I was around that bit of code I also made two changes to a nearby (related) printk() - I modified it to specify the loglevel explicitly and also broke the line into a few pieces to avoid it being longer than 80 chars and clarified the text a bit. Signed-off-by: NJesper Juhl <juhl-lkml@dif.dk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-